scholarly journals 300 GHz Optoelectronic Transmitter Combining Integrated Photonics and Electronic Multipliers for Wireless Communication

Photonics ◽  
2019 ◽  
Vol 6 (2) ◽  
pp. 35 ◽  
Author(s):  
Muhsin Ali ◽  
Jose Manuel Pérez-Escudero ◽  
Robinson-Cruzoe Guzmán-Martínez ◽  
Mu-Chieh Lo ◽  
Iñigo Ederra ◽  
...  
Keyword(s):  
Communication Networks ◽  
High Speed ◽  
Local Oscillator ◽  
Frequency Multiplier ◽  
Laser Source ◽  
Wireless Data ◽  
Data Rates ◽  
Power Handling Capability ◽  
Electronic Frequency ◽  
Thz Power

THz communications systems at carrier frequencies above 200 GHz are the key to enable next-generation mobile communication networks with 100 Gbit/s wireless data rates. One of the key questions is, which carrier frequency generation technique will be the most suitable. This is currently addressed by two separate approaches, electronics-based and photonics-based. We present in this paper a truly microwave photonic approach that benefits from the main key features of each, bandwidth, tunability, stability and fiber compatibility from photonics and power handling capability from the electronics. It is based on a Photonic Local Oscillator (PLO), generating a 100 GHz frequency, fed into an electronic frequency multiplier. A high speed uni-travelling carrier photodiode (UTC-PD) provides the 100 GHz PLO for Schottky tripler diodes, generating 300 GHz signal. To feed the UTC-PD, we present a photonic integrated mode locked laser source. According to the simulations and measurements, the developed transmitter can produce a maximum of 12 μW of THz power at 280 GHz.

An Ultrawideband Microfabricated Gold-Based Antenna Array for Terahertz Communications

2020 ◽  
Author(s):  
Abdoalbaset Abohmra ◽  
Hasan Abbas ◽  
Jalil Kazim ◽  
Muhammad Rabbani ◽  
Chong Li ◽  
...  
Keyword(s):  
Communication Networks ◽  
Energy Efficient ◽  
High Speed ◽  
Coplanar Waveguide ◽  
Microwave Frequency ◽  
Future Generation ◽  
Data Rates ◽  
Terahertz Communications ◽  
High Bandwidth ◽  
The Cost

Abstract The microwave frequency band typically used for wireless communications will soon become saturated and will no longer be able to fulfil the high bandwidth demands of modern communication networks. Terahertz (THz) communication has appeared as a highly attractive, future-generation wireless technology that offers higher spectral bandwidth and, therefore, higher data rates. However, the full exploitation of THz technologies is contingent upon the availability of energy-efficient sources and devices. In this article, we presented a fabrication and measurement of microscale planar inverted cone antenna (PICA) array made of gold. Using an ungrounded coplanar waveguide feed, the microfabricated structure provides a bandwidth of 37.9 % with the resonant frequency of 0.925 THz. Given the cost of microfabrication is reducing substantially with rapid technological advancements, the results of this paper suggest that high-speed THz communications can be realised for widescale applications.

High-Speed Light Sources in High-Speed Optical Passive Local Area Communication Networks

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
IS Amiri ◽  
Ahmed Nabih Zaki Rashed ◽  
P Yupapin
Keyword(s):  
Communication Networks ◽  
High Speed ◽  
Network Performance ◽  
Optical Filters ◽  
Local Area ◽  
Optical Amplifier ◽  
Error Rates ◽  
Measured Signal ◽  
Light Sources ◽  
Data Rates

AbstractThis study outlines the high-speed light sources in high-speed passive optical local area communication networks. Directly modulated laser measured is selected as a light source for data rate transfer of 40 Gb/s for propagation range up to 20 km. Optical output power after fiber-optic cable is measured. Signal power amplitude, Q-factor, and data error rates after the receive side are also measured. Hybrid optical amplifier, optical filters, and electrical filters are used for upgrading the network performance operation efficiency. The study assured that the optical communication network can be extended to 20 km distance with data rates of 40 Gb/s with achieving maximum Q-factor of 14.98 and minimum data rates of 3.55 ×10–51.

scholarly journals Weigh-in-Motion: Lightweight Real-Time Identification of Gbps Wireless Traffic

Sensors ◽  
2022 ◽  
Vol 22 (2) ◽  
pp. 437
Author(s):  
Sungsoo Kim ◽  
Joon Yoo ◽  
Jaehyuk Choi
Keyword(s):  
High Speed ◽  
Wireless Link ◽  
Wireless Data ◽  
Underlying Assumption ◽  
Detection Scheme ◽  
Weigh In Motion ◽  
Data Rates ◽  
Packet Arrival ◽  
Wireless Device ◽  
Real Time Identification

Distinguishing between wireless and wired traffic in a network middlebox is an essential ingredient for numerous applications including security monitoring and quality-of-service (QoS) provisioning. The majority of existing approaches have exploited the greater delay statistics, such as round-trip-time and inter-packet arrival time, observed in wireless traffic to infer whether the traffic is originated from Ethernet (i.e., wired) or Wi-Fi (i.e., wireless) based on the assumption that the capacity of the wireless link is much slower than that of the wired link. However, this underlying assumption is no longer valid due to increases in wireless data rates over Gbps enabled by recent Wi-Fi technologies such as 802.11ac/ax. In this paper, we revisit the problem of identifying Wi-Fi traffic in network middleboxes as the wireless link capacity approaches the capacity of the wired. We present Weigh-in-Motion, a lightweight online detection scheme, that analyzes the traffic patterns observed at the middleboxes and infers whether the traffic is originated from high-speed Wi-Fi devices. To this end, we introduce the concept of ACKBunch that captures the unique characteristics of high-speed Wi-Fi, which is further utilized to distinguish whether the observed traffic is originated from a wired or wireless device. The effectiveness of the proposed scheme is evaluated via extensive real experiments, demonstrating its capability of accurately identifying wireless traffic from/to Gigabit 802.11 devices.

A Novel Image Encryption Algorithm Using Multiple Encryption Techniques for Mobile Devices

2020 ◽  
Vol 10 (2) ◽  
pp. 123-142
Author(s):  
Showkat Ahmad Bhat ◽  
Amandeep Singh
Keyword(s):  
Wireless Communication ◽  
Communication Networks ◽  
Image Encryption ◽  
High Speed ◽  
Security Analysis ◽  
Encryption Algorithm ◽  
Multiple Encryption ◽  
Communication Devices ◽  
Cryptographic Attacks ◽  
Image Encryption Algorithm

Background & Objective: Digital multimedia exchange between different mobile communication devices has increased rapidly with the invention of the high-speed data services like LTE-A, LTE, and WiMAX. However, there are always certain security risks associated with the use of wireless communication technologies. Methods: To protect the digital images against cryptographic attacks different image encryption algorithms are being employed in the wireless communication networks. These algorithms use comparatively less key spaces and accordingly offer inadequate security. The proposed algorithm described in this paper based on Rubik’s cube principle because of its high confusion and diffusion properties, Arnold function having effective scrambling power, blocking cipher with block encryption and permutation powers. The main strength of the proposed algorithm lies in the large key spaces and the combination of different high power encryption techniques at each stage of algorithm. The different operations employed on the image are with four security keys of different key spaces at multiple stages of the algorithm. Results & Conclusion: Finally, the effectiveness and the security analysis results shows that the proposed image encryption algorithm attains high encryption and security capabilities along with high resistance against cryptanalytic attacks, differential attacks and statistical attacks.

A High Speed and Ultra Long-Haul Radio-Over-Fiber System Employing Dual Photoelectric Arms Coherent Modulation and Optical Duo-Binary Coding

2014 ◽  
Vol 988 ◽  
pp. 544-547
Author(s):  
Guang Li
Keyword(s):  
High Speed ◽  
Continuous Wave ◽  
Single Mode ◽  
Fiber Amplifier ◽  
Radio Over Fiber ◽  
Laser Source ◽  
Signal Spectrum ◽  
Fiber System ◽  
Binary Coding ◽  
Coherent Modulation

A novel high speed and ultra long-haul radio-over-fiber (ROF) system based on Dual Photoelectric Arms Coherent Modulation (DPACM) and Optical Duo-Binary Coding (ODBC) is proposed, and demonstrated. The signal spectrum bandwidth, generated by ODBC based on the first order DPACM, is half of non-return-to-zero (NRZ ) signal spectrum bandwidth. The secondary order DPACM generates a 40-GHz Millimeter-wave (mm-wave) that is transmitted over fiber (ROF). The simulation results show that, the bit rate can be up to 40 Gbps and the transmission distance is over 1500 Km, based on the ROF system with a 0 dBm continuous-wave laser source, multiple stages Er-Doped Fiber Amplifier (EDFA), a standard single mode fiber (SSMF) with a dispersion of 17 ps/nm/Km and a attenuation of 0.2 dB/Km.

The Engagement of Hybrid Ultra High Space Division Multiplexing with Maximum Time Division Multiplexing Techniques for High-Speed Single-Mode Fiber Cable Systems

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
I. S. Amiri ◽  
P. G. Kuppusamy ◽  
Ahmed Nabih Zaki Rashed ◽  
P. Jayarajan ◽  
M. R. Thiyagupriyadharsan ◽  
...  
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Design Parameters ◽  
Control Parameters ◽  
Data Rates ◽  
Fiber Optic Communication ◽  
High Space ◽  
Optic Communication

AbstractHigh-speed single-mode fiber-optic communication systems have been presented based on various hybrid multiplexing schemes. Refractive index step and silica-doped germanium percentage parameters are also preserved during their technological boundaries of attention. It is noticed that the connect design parameters suffer more nonlinearity with the number of connects. Two different propagation techniques have been used to investigate the transmitted data rates as a criterion to enhance system performance. The first technique is soliton propagation, where the control parameters lead to equilibrium between the pulse spreading due to dispersion and the pulse shrinking because of nonlinearity. The second technique is the MTDM technique where the parameters are adjusted to lead to minimum dispersion. Two cases are investigated: no dispersion cancellation and dispersion cancellation. The investigations are conducted over an enormous range of the set of control parameters. Thermal effects are considered through three basic quantities, namely the transmission data rates, the dispersion characteristics, and the spectral losses.

scholarly journals Towards a Glass New World: The Role of Ion-Exchange in Modern Technology

2021 ◽  
Vol 11 (10) ◽  
pp. 4610
Author(s):  
Simone Berneschi ◽  
Giancarlo C. Righini ◽  
Stefano Pelli
Keyword(s):  
Ion Exchange ◽  
Communication Networks ◽  
High Speed ◽  
High Performance ◽  
Low Cost ◽  
Modern Technology ◽  
Historical Background ◽  
Wide Range ◽  
Happy Marriage

Glasses, in their different forms and compositions, have special properties that are not found in other materials. The combination of transparency and hardness at room temperature, combined with a suitable mechanical strength and excellent chemical durability, makes this material indispensable for many applications in different technological fields (as, for instance, the optical fibres which constitute the physical carrier for high-speed communication networks as well as the transducer for a wide range of high-performance sensors). For its part, ion-exchange from molten salts is a well-established, low-cost technology capable of modifying the chemical-physical properties of glass. The synergy between ion-exchange and glass has always been a happy marriage, from its ancient historical background for the realisation of wonderful artefacts, to the discovery of novel and fascinating solutions for modern technology (e.g., integrated optics). Getting inspiration from some hot topics related to the application context of this technique, the goal of this critical review is to show how ion-exchange in glass, far from being an obsolete process, can still have an important impact in everyday life, both at a merely commercial level as well as at that of frontier research.

A nondirective infrared transceiver for indoor high speed wireless data communication

1994 ◽  
Vol 40 (1) ◽  
pp. 20-27 ◽  
Author(s):  
Tay-Her Tsaur ◽  
Kwang-Cheng Chen ◽  
Chenhsin Lien ◽  
Ming-Tang Shih ◽  
C.P.J. Tzeng
Keyword(s):  
High Speed ◽  
Data Communication ◽  
Wireless Data ◽  
Wireless Data Communication

scholarly journals Error Performance Estimation of Modulated Retroreflective Transdermal Optical Wireless Links with Diversity under Generalized Pointing Errors

Telecom ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 167-180
Author(s):  
George K. Varotsos ◽  
Hector E. Nistazakis ◽  
Konstantinos Aidinis ◽  
Fadi Jaber ◽  
Mohd Nasor ◽  
...  
Keyword(s):  
High Speed ◽  
Signal To Noise Ratio ◽  
Spatial Diversity ◽  
Performance Estimation ◽  
Optical Wireless ◽  
Wireless Data ◽  
Error Performance ◽  
Pointing Errors ◽  
Implanted Medical Devices ◽  
Recent Developments

Recent developments in both optical wireless communication (OWC) systems and implanted medical devices (IMDs) have introduced transdermal optical wireless (TOW) technology as a viable candidate for extremely high-speed in-body to out-of-body wireless data transmissions, which are growing in demand for many vital biomedical applications, including telemetry with medical implants, health monitoring, neural recording and prostheses. Nevertheless, this emerging communication modality is primarily hindered by skin-induced attenuation of the propagating signal bit carrier along with its stochastic misalignment-induced fading. Thus, by considering a typical modulated retroreflective (MRR) TOW system with spatial diversity and optimal combining (OC) for signal reception in this work, we focus, for the first time in the MRR TOW literature, on the stochastic nature of generalized pointing errors with non-zero boresight (NZB). Specifically, under these circumstances, novel analytical mathematical expressions were derived for the total average bit error rate (BER) of various system configurations. Their results revealed significant outage performance enhancements when spatial diversity was utilized. Moreover, taking into consideration the total transdermal pathloss along with the effects of stochastic NZB pointing errors, the critical average signal-to-noise ratio (SNR) metric was evaluated for typical power spectral-density values.

Sign in / Sign up

Export Citation Format

Share Document