scholarly journals Broadband Terahertz Photonic Integrated Circuit with Integrated Active Photonic Devices

Photonics ◽  
2021 ◽  
Vol 8 (11) ◽  
pp. 492
Author(s):  
Amlan kusum Mukherjee ◽  
Mingjun Xiang ◽  
Sascha Preu
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Near Field ◽  
Single Mode ◽  
Silicon On Insulator ◽  
High Resistivity ◽  
Active Components ◽  
Photonic Integrated Circuit ◽  
Active Devices ◽  
Frequency Coverage

Present-day photonic terahertz (100 GHz–10 THz) systems offer dynamic ranges beyond 100 dB and frequency coverage beyond 4 THz. They yet predominantly employ free-space Terahertz propagation, lacking integration depth and miniaturisation capabilities without sacrificing their extreme frequency coverage. In this work, we present a high resistivity silicon-on-insulator-based multimodal waveguide topology including active components (e.g., THz receivers) as well as passive components (couplers/splitters, bends, resonators) investigated over a frequency range of 0.5–1.6 THz. The waveguides have a single mode bandwidth between 0.5–0.75 THz; however, above 1 THz, these waveguides can be operated in the overmoded regime offering lower loss than commonly implemented hollow metal waveguides, operated in the fundamental mode. Supported by quartz and polyethylene substrates, the platform for Terahertz photonic integrated circuits (Tera-PICs) is mechanically stable and easily integrable. Additionally, we demonstrate several key components for Tera-PICs: low loss bends with radii ∼2 mm, a Vivaldi antenna-based efficient near-field coupling to active devices, a 3-dB splitter and a filter based on a whispering gallery mode resonator.

scholarly journals Interband Cascade Photonic Integrated Circuits on Native III-V Chip

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 599
Author(s):  
Jerry R. Meyer ◽  
Chul Soo Kim ◽  
Mijin Kim ◽  
Chadwick L. Canedy ◽  
Charles D. Merritt ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Detection System ◽  
Laser Cavity ◽  
Building Blocks ◽  
Drive Power ◽  
Optical Elements ◽  
Photonic Integrated Circuit ◽  
Cleaved Facets ◽  
On Chip

We describe how a midwave infrared photonic integrated circuit (PIC) that combines lasers, detectors, passive waveguides, and other optical elements may be constructed on the native GaSb substrate of an interband cascade laser (ICL) structure. The active and passive building blocks may be used, for example, to fabricate an on-chip chemical detection system with a passive sensing waveguide that evanescently couples to an ambient sample gas. A variety of highly compact architectures are described, some of which incorporate both the sensing waveguide and detector into a laser cavity defined by two high-reflectivity cleaved facets. We also describe an edge-emitting laser configuration that optimizes stability by minimizing parasitic feedback from external optical elements, and which can potentially operate with lower drive power than any mid-IR laser now available. While ICL-based PICs processed on GaSb serve to illustrate the various configurations, many of the proposed concepts apply equally to quantum-cascade-laser (QCL)-based PICs processed on InP, and PICs that integrate III-V lasers and detectors on silicon. With mature processing, it should become possible to mass-produce hundreds of individual PICs on the same chip which, when singulated, will realize chemical sensing by an extremely compact and inexpensive package.

Design and characteristics of reflectivity tunable mirror with MZI and loop waveguide on SOI

2021 ◽  
Author(s):  
Yutaka Makihara ◽  
Moataz Eissa ◽  
Tomohiro AMEMIYA ◽  
Nobuhiko Nishiyama
Keyword(s):  
Phase Shift ◽  
Coupling Coefficient ◽  
Integrated Circuit ◽  
Silicon Photonics ◽  
Silicon On Insulator ◽  
Zehnder Interferometer ◽  
Directional Couplers ◽  
Photonic Integrated Circuit ◽  
Active Elements ◽  
Measurement Results

Abstract To achieve a reconfigurable photonic integrated circuit with active elements, we proposed a reflectivity tunable mirror constructed using a Mach–Zehnder interferometer (MZI) with a micro heater and loop waveguide on a silicon photonics platform. In this paper, the principle of the operation, design, fabrication, and measurement results of the mirror are presented. In theory, the phase shift dependence of the mirror relies on the coupling coefficient of the directional couplers of the MZI. When the coupling coefficient κ2 was 0.5 and 0.15, the reflection could be turned on and off with a phase shift of π/2 and π, respectively. The reflection power of the fabricated mirror on the silicon on insulator (SOI) substrate was changed by more than 20 dB by a phase shift. In addition, it was demonstrated that the phase shift dependence of the mirror changes with the coupling coefficient of the fabricated devices.

scholarly journals Organic printed photonics: From microring lasers to integrated circuits

2015 ◽  
Vol 1 (8) ◽  
pp. e1500257 ◽  
Author(s):  
Chuang Zhang ◽  
Chang-Ling Zou ◽  
Yan Zhao ◽  
Chun-Hua Dong ◽  
Cong Wei ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Flexible Electronics ◽  
Integrated Circuit ◽  
Large Scale ◽  
Rapid Development ◽  
Light Signal ◽  
Photonic Integrated Circuit ◽  
Printing Technique ◽  
On Chip ◽  
Silicon Based

A photonic integrated circuit (PIC) is the optical analogy of an electronic loop in which photons are signal carriers with high transport speed and parallel processing capability. Besides the most frequently demonstrated silicon-based circuits, PICs require a variety of materials for light generation, processing, modulation, and detection. With their diversity and flexibility, organic molecular materials provide an alternative platform for photonics; however, the versatile fabrication of organic integrated circuits with the desired photonic performance remains a big challenge. The rapid development of flexible electronics has shown that a solution printing technique has considerable potential for the large-scale fabrication and integration of microsized/nanosized devices. We propose the idea of soft photonics and demonstrate the function-directed fabrication of high-quality organic photonic devices and circuits. We prepared size-tunable and reproducible polymer microring resonators on a wafer-scale transparent and flexible chip using a solution printing technique. The printed optical resonator showed a quality (Q) factor higher than 4 × 105, which is comparable to that of silicon-based resonators. The high material compatibility of this printed photonic chip enabled us to realize low-threshold microlasers by doping organic functional molecules into a typical photonic device. On an identical chip, this construction strategy allowed us to design a complex assembly of one-dimensional waveguide and resonator components for light signal filtering and optical storage toward the large-scale on-chip integration of microscopic photonic units. Thus, we have developed a scheme for soft photonic integration that may motivate further studies on organic photonic materials and devices.

scholarly journals High Temperature Silicon Integrated Circuits and Passive Components for Commercial and Military Applications

1998 ◽  
Author(s):  
Richard R. Grzybowski ◽  
Ben Gingrich
Keyword(s):  
High Temperature ◽  
Integrated Circuits ◽  
Integrated Circuit ◽  
Elevated Temperatures ◽  
Silicon On Insulator ◽  
Passive Component ◽  
Oil Well ◽  
Automotive Electronics ◽  
Passive Components ◽  
Silicon Integrated Circuits

Advances in silicon-on-insulator (SOI) integrated circuit technology and the steady development of wider band gap semiconductors like silicon carbide are enabling the practical deployment of high temperature electronics. High temperature civilian and military electronics applications include distributed controls for aircraft, automotive electronics, electric vehicles and instrumentation for geothermal wells, oil well logging and nuclear reactors. While integrated circuits are key to the realization of complete high temperature electronic systems, passive components including resistors, capacitors, magnetics and crystals are also required. This paper will present characterization data obtained from a number of silicon high temperature integrated evaluated over a range of elevated temperatures and aged at a selected high temperature. This paper will also present a representative cross section of high temperature passive component characterization data for device types needed by many applications. Device types represented will include both small signal and power resistors and capacitors. Specific problems encountered with the employment of these devices in harsh environments will be discussed for each family of components. The goal in presenting this information is to demonstrate the viability of a significant number of commercially available silicon integrated circuits and passive components that operate at elevated temperatures as well as to encourage component suppliers to continue to optimize a selection of their product offerings for operation at higher temperatures. In addition, systems designers will be encouraged to view this information with an eye toward the conception and implementation of reliable and affordable high temperature systems.

scholarly journals Evaluation of the Potential Electromagnetic Interference in Vertically Stacked 3D Integrated Circuits

2020 ◽  
Vol 10 (3) ◽  
pp. 748
Author(s):  
Dipesh Kapoor ◽  
Cher Ming Tan ◽  
Vivek Sangwan
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Electromagnetic Interference ◽  
High Speed ◽  
High Performance ◽  
Near Field ◽  
Three Dimensional ◽  
3D Ic ◽  
Three Dimensional Integrated Circuit ◽  
The Impact

Advancements in the functionalities and operating frequencies of integrated circuits (IC) have led to the necessity of measuring their electromagnetic Interference (EMI). Three-dimensional integrated circuit (3D-IC) represents the current advancements for multi-functionalities, high speed, high performance, and low-power IC technology. While the thermal challenges of 3D-IC have been studied extensively, the influence of EMI among the stacked dies has not been investigated. With the decreasing spacing between the stacked dies, this EMI can become more severe. This work demonstrates the potential of EMI within a 3D-IC numerically, and determines the minimum distance between stack dies to reduce the impact of EMI from one another before they are fabricated. The limitations of using near field measurement for the EMI study in stacked dies 3D-IC are also illustrated.

Thermodynamic insights into Henry's constant in hyperthermal oxidation of silicon for fabricating optical waveguides

2021 ◽  
Author(s):  
Ting Yu ◽  
DeGui Sun
Keyword(s):  
Integrated Circuit ◽  
Optical Waveguides ◽  
Silicon On Insulator ◽  
Henry's Constant ◽  
Photonic Integrated Circuit ◽  
Local Oxidation ◽  
Waveguide Fabrication

Hyperthermal oxidation of silicon is envisaged to be an alternative to silicon-on-insulator (SOI) waveguide fabrication for photonic integrated circuit (PIC) devices, and thus the local oxidation of silicon (LOCOS) technique has attracted attention.

Passive and Active Nanophotonics

2012 ◽  
Vol 82 ◽  
pp. 9-18
Author(s):  
Yeshaiahu Fainman ◽  
D. Tan ◽  
S. Zamek ◽  
O. Bondarenko ◽  
A. Simic ◽  
...  
Keyword(s):  
Short Pulse ◽  
Silicon On Insulator ◽  
Three Dimensions ◽  
Photonic Integration ◽  
Active Components ◽  
Passive Components ◽  
Active Devices ◽  
Pulse Compressor ◽  
Monolithically Integrated

Dense photonic integration requires miniaturization of materials, devices and subsystems, including passive components (e.g., engineered composite metamaterials, filters, etc.) and active components (e.g., lasers, modulators, detectors). This paper discusses passive and active devices that recently have been demonstrated in our laboratory, including monolithically integrated short pulse compressor utilized with silicon on insulator material platform and design, fabrication and testing of nanolasers constructed using metal-dielectric-semiconductor resonators confined in all three dimensions.

scholarly journals High-isolation antenna array using SIW and realized with a graphene layer for sub-terahertz wireless applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mohammad Alibakhshikenari ◽  
Bal S. Virdee ◽  
Shahram Salekzamankhani ◽  
Sonia Aïssa ◽  
Chan H. See ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Antenna Arrays ◽  
Integrated Circuit ◽  
Mutual Coupling ◽  
Near Field ◽  
Dielectric Substrate ◽  
Patch Antennas ◽  
Reference Array ◽  
Radiation Properties ◽  
Array Structures

AbstractThis paper presents the results of a study on developing an effective technique to increase the performance characteristics of antenna arrays for sub-THz integrated circuit applications. This is essential to compensate the limited power available from sub-THz sources. Although conventional array structures can provide a solution to enhance the radiation-gain performance however in the case of small-sized array structures the radiation properties can be adversely affected by mutual coupling that exists between the radiating elements. It is demonstrated here the effectiveness of using SIW technology to suppress surface wave propagations and near field mutual coupling effects. Prototype of 2 × 3 antenna arrays were designed and constructed on a polyimide dielectric substrate with thickness of 125 μm for operation across 0.19–0.20 THz. The dimensions of the array were 20 × 13.5 × 0.125 mm3. Metallization of the antenna was coated with 500 nm layer of Graphene. With the proposed technique the isolation between the radiating elements was improved on average by 22.5 dB compared to a reference array antenna with no SIW isolation. The performance of the array was enhanced by transforming the patch to exhibit metamaterial characteristics. This was achieved by embedding the patch antennas in the array with sub-wavelength slots. Compared to the reference array the metamaterial inspired structure exhibits improvement in isolation, radiation gain and efficiency on average by 28 dB, 6.3 dBi, and 34%, respectively. These results show the viability of proposed approach in developing antenna arrays for application in sub-THz integrated circuits.

Sign in / Sign up

Export Citation Format

Share Document