scholarly journals Bioactivity and Bone Cell Formation with Poly-ε-Caprolactone/Bioceramic 3D Porous Scaffolds

Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2718
Author(s):  
Po-Kai Juan ◽  
Fang-Yu Fan ◽  
Wei-Chun Lin ◽  
Pei-Bang Liao ◽  
Chiung-Fang Huang ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Cell Attachment ◽  
Ph Value ◽  
Ceramic Powder ◽  
High Ratio ◽  
Porous Scaffolds ◽  
Alp Activity ◽  
Mg63 Cells ◽  
Human Cancellous Bone

This study applied poly-ε-caprolactone (PCL), a biomedical ceramic powder as an additive (nano-hydroxyapatite (nHA) or β-tricalcium diphosphate (β-TCP)), and sodium chloride (NaCl) and ammonium bicarbonate ((NH4)HCO3) as porogens; these stuffs were used as scaffold materials. An improved solvent-casting/particulate-leaching method was utilized to fabricate 3D porous scaffolds. In this study we examined the physical properties (elastic modulus, porosity, and contact angle) and degradation properties (weight loss and pH value) of the 3D porous scaffolds. Both nHA and β-TCP improved the mechanical properties (elastic modulus) of the 3D porous scaffolds. The elastic modulus (0.15~1.865 GPa) of the various composite scaffolds matched that of human cancellous bone (0.1~4.5 GPa). Osteoblast-like (MG63) cells were cultured, a microculture tetrazolium test (MTT) was conducted and alkaline phosphatase (ALP) activity of the 3D porous scaffolds was determined. Experimental results indicated that both nHA and β-TCP powder improved the hydrophilic properties of the scaffolds. The degradation rate of the scaffolds was accelerated by adding nHA or β-TCP. The MTT and ALP activity tests indicated that the scaffolds with a high ratio of nHA or β-TCP had excellent properties of in vitro biocompatibility (cell attachment and proliferation).

scholarly journals Additively Manufactured Continuous Cell-Size Gradient Porous Scaffolds: Pore Characteristics, Mechanical Properties and Biological Responses In Vitro

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2589 ◽  
Author(s):  
Fei Liu ◽  
Qichun Ran ◽  
Miao Zhao ◽  
Tao Zhang ◽  
David Z. Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Pore Size ◽  
Cell Size ◽  
Porous Scaffolds ◽  
Ct Reconstruction ◽  
Pore Characteristics ◽  
Growth Environment ◽  
Size Gradient

Porous scaffolds with graded open porosity combining a morphology similar to that of bone with mechanical and biological properties are becoming an attractive candidate for bone grafts. In this work, scaffolds with a continuous cell-size gradient were studied from the aspects of pore properties, mechanical properties and bio-functional properties. Using a mathematical method named triply periodic minimal surfaces (TPMS), uniform and graded scaffolds with Gyroid and Diamond units were manufactured by selective laser melting (SLM) with Ti-6Al-4V, followed by micro-computer tomography (CT) reconstruction, mechanical testing and in vitro evaluation. It was found that gradient scaffolds were preferably replicated by SLM with continuous graded changes in surface area and pore size, but their pore size should be designed to be ≥ 450 μm to ensure good interconnectivity. Both the Gyroid and Diamond structures have superior strength compared to cancellous bones, and their elastic modulus is comparable to the bones. In comparison, Gyroid exhibits better performances than Diamond in terms of the elastic modulus, ultimate strength and ductility. In vitro cell culture experiments show that the gradients provide an ideal growth environment for osteoblast growth in which cells survive well and distribute uniformly due to biocompatibility of the Ti-6Al-4V material, interconnectivity and suitable pore size.

Synergistic effects of elastic modulus and surface topology of Ti-based implants on early osseointegration

RSC Advances ◽  
2016 ◽  
Vol 6 (49) ◽  
pp. 43685-43696 ◽  
Author(s):  
Xiaohan Dai ◽  
Xuehui Zhang ◽  
Mingming Xu ◽  
Ying Huang ◽  
Boon Chin Heng ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Synergistic Effect ◽  
Osteogenic Differentiation ◽  
Cell Attachment ◽  
Synergistic Effects ◽  
Surface Topology ◽  
Ti Alloy ◽  
Micro Scale

Elastic modulus and surface micro-scale topographical structure of Ti alloy implants have a synergistic effect on cell attachment, osteogenic differentiation of rBMSCs in vitro and early osseointegration in vivo.

Effect of Pamidronate on Protein Adsorption and Osteoblast Adhesion to Hydroxyapatite Bioceramics Scaffold

2007 ◽  
Vol 330-332 ◽  
pp. 885-888
Author(s):  
En Luo ◽  
Jun Cui ◽  
Y. Gao ◽  
Yun Feng Lin ◽  
S.S. Zhu ◽  
...  
Keyword(s):  
Protein Adsorption ◽  
Cell Attachment ◽  
Calf Serum ◽  
Osteoblastic Cells ◽  
Bone Scaffold ◽  
Obvious Effect ◽  
Alp Activity ◽  
Significant Difference ◽  
Ft Ir

This study is to investigate the effect of PAM on protein adsorption and osteoblastic cells adhesion to HA bioceramics. PAM was immobilized on the surface of HA bioceramics for bone scaffold by chelating. The outermost layer of the specimens was analyzed by XPS and FT-IR. The protein adsorption test was performed using the 10% bovine calf serum absorbed on the specimens in vitro. The osteoblastic cells were inoculated and cultured on the scaffolds. SEM, MTT test and ALP activity test evaluated the cell attachment, proliferation and activity on the scaffolds. Characteristic peaks in XPS and FT-IR spectra indicated PAM being immobilized on the surface of the bioceramics. PAGE and 2-D DIGE results indicated that HA absorbed more acidic proteins, while PAM-HA absorbed more basic and neutral proteins.The cell culture test indicated that the cells actively proliferated on the scaffolds. There was no significant difference between the ALP activity of the cells cultured for 1d, 3d, 5d and 7d on PAM-HA and that of the controls. PAM had no obvious effect on the cytocompatibility of HA, and PAM-HA bioceramics could be used as bone scaffold with potential ability to improve osteogenesis.

scholarly journals Augmentation of DMLS Biomimetic Dental Implants with Weight-Bearing Strut to Balance of Biologic and Mechanical Demands: From Bench to Animal

Materials ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 164 ◽  
Author(s):  
Jenny Zwei-Chieng Chang ◽  
Pei-I Tsai ◽  
Mark Yen-Ping Kuo ◽  
Jui-Sheng Sun ◽  
San-Yuan Chen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Dental Implants ◽  
Dental Implant ◽  
Bone Ingrowth ◽  
Weight Bearing ◽  
Morphological Characteristics ◽  
Porous Scaffolds ◽  
Pull Out ◽  
Mg63 Cells

A mismatch of elastic modulus values could result in undesirable bone resorption around the dental implant. The objective of this study was to optimize direct metal laser sintering (DMLS)-manufactured Ti6Al4V dental implants’ design, minimize elastic mismatch, allow for maximal bone ingrowth, and improve long-term fixation of the implant. In this study, DMLS dental implants with different morphological characteristics were fabricated. Three-point bending, torsional, and stability tests were performed to compare the mechanical properties of different designs. Improvement of the weaker design was attempted by augmentation with a longitudinal 3D-printed strut. The osseointegrative properties were evaluated. The results showed that the increase in porosity decreased the mechanical properties, while augmentation with a longitudinal weight-bearing strut can improve mechanical strength. Maximal alkaline phosphatase gene expression of MG63 cells attained on 60% porosity Ti6Al4V discs. In vivo experiments showed good incorporation of bone into the porous scaffolds of the DMLS dental implant, resulting in a higher pull-out strength. In summary, we introduced a new design concept by augmenting the implant with a longitudinal weight-bearing strut to achieve the ideal combination of high strength and low elastic modulus; our results showed that there is a chance to reach the balance of both biologic and mechanical demands.

scholarly journals Comparison of physical, chemical and cellular responses to nano- and micro-sized calcium silicate/poly(ε-caprolactone) bioactive composites

2007 ◽  
Vol 5 (23) ◽  
pp. 617-630 ◽  
Author(s):  
Jie wei ◽  
S.J Heo ◽  
D.H Kim ◽  
S.E Kim ◽  
Y.T Hyun ◽  
...  
Keyword(s):  
Calcium Silicate ◽  
Cell Attachment ◽  
Human Mesenchymal Stem Cells ◽  
Apatite Formation ◽  
Intimate Contact ◽  
Cell Responses ◽  
Mg63 Cells ◽  
Proliferation And Differentiation ◽  
Bioactive Composites

In this study, we fabricated nano-sized calcium silicate/poly(ε-caprolactone) composite (n-CPC) and micro-sized calcium silicate/poly(ε-caprolactone) composite (m-CPC). The composition, mechanical properties, hydrophilicity and degradability of both n-CPC and m-CPC were determined, and in vitro bioactivity was evaluated by investigating apatite forming on their surfaces in simulated body fluid (SBF). In addition, cell responses to the two kinds of composites were comparably investigated. The results indicated that n-CPC has superior hydrophilicity, compressive strength and elastic modulus properties compared with m-CPC. Both n-CPC and m-CPC exhibited good in vitro bioactivity, with different morphologies of apatite formation on their surfaces. The apatite layer on n-CPC was more homogeneous and compact than on m-CPC, due to the elevated levels of calcium and silicon concentrations in SBF from n-CPC throughout the 14-day soaking period. Significantly higher levels of attachment and proliferation of MG63 cells were observed on n-CPC than on m-CPC, and significantly higher levels of alkaline phosphatase activity were observed in human mesenchymal stem cells (hMSCs) on n-CPC than on m-CPC after 7 days. Scanning electron microscopy observations revealed that hMSCs were in intimate contact with both n-CPC and m-CPC surfaces, and significantly cell adhesion, spread and growth were observed on n-CPC and m-CPC. These results indicated that both n-CPC and m-CPC have the ability to support cell attachment, growth, proliferation and differentiation, and also yield good bioactivity and biocompatibility.

Designing porous scaffolds for tissue engineering

2005 ◽  
Vol 364 (1838) ◽  
pp. 227-232 ◽  
Author(s):  
William Bonfield
Keyword(s):  
Tissue Engineering ◽  
Cellular Response ◽  
Cell Attachment ◽  
Wide Spectrum ◽  
Porous Scaffolds ◽  
Potential Control ◽  
Biomaterial Scaffold ◽  
Porous Architecture

Biomaterials are either modified natural or synthetic materials, with an appropriate response in the host tissue, which find application in a wide spectrum of implants and prostheses used in reconstructive medicine. The subsequent integration and longevity of the implanted device depends on the effectiveness of the associated biological repair. Hence, there has been considerable interest in the development of novel, second generation, biomaterials, which are favourably bioactive in terms of promoting the desired cellular response in vivo . Such biomaterials in a porous form can also act as cellular scaffolds and allow in vitro , as well as in vivo incorporation of the appropriate tissue cells, with potential control of the sequence of cell attachment, proliferation and the production of extra-cellular matrix. Such generic tissue engineering depends critically on the porous architecture of the biomaterial scaffold so as to allow both the cellular ingress and vascularization required to create a living tissue. The particular requirements of tissue-engineering scaffolds with respect to macro- and micro-porosity, as well as chemistry, are reviewed.

Insights into the biochemical and functional characterization of sortase E transpeptidase of Corynebacterium glutamicum

2019 ◽  
Vol 476 (24) ◽  
pp. 3835-3847 ◽  
Author(s):  
Aliyath Susmitha ◽  
Kesavan Madhavan Nampoothiri ◽  
Harsha Bajaj
Keyword(s):  
Protein Engineering ◽  
Cell Attachment ◽  
Functional Characterization ◽  
Protein Structures ◽  
Structural Similarity ◽  
Surface Proteins ◽  
Sortase A ◽  
Peptide Cleavage ◽  
New Findings

Most Gram-positive bacteria contain a membrane-bound transpeptidase known as sortase which covalently incorporates the surface proteins on to the cell wall. The sortase-displayed protein structures are involved in cell attachment, nutrient uptake and aerial hyphae formation. Among the six classes of sortase (A–F), sortase A of S. aureus is the well-characterized housekeeping enzyme considered as an ideal drug target and a valuable biochemical reagent for protein engineering. Similar to SrtA, class E sortase in GC rich bacteria plays a housekeeping role which is not studied extensively. However, C. glutamicum ATCC 13032, an industrially important organism known for amino acid production, carries a single putative sortase (NCgl2838) gene but neither in vitro peptide cleavage activity nor biochemical characterizations have been investigated. Here, we identified that the gene is having a sortase activity and analyzed its structural similarity with Cd-SrtF. The purified enzyme showed a greater affinity toward LAXTG substrate with a calculated KM of 12 ± 1 µM, one of the highest affinities reported for this class of enzyme. Moreover, site-directed mutation studies were carried to ascertain the structure functional relationship of Cg-SrtE and all these are new findings which will enable us to perceive exciting protein engineering applications with this class of enzyme from a non-pathogenic microbe.

Rhenium-188 Labeled Hydroxyapatite and Rhenium-188 Sulfur Colloid

1997 ◽  
Vol 36 (02) ◽  
pp. 71-75 ◽  
Author(s):  
S. Glatz ◽  
S. N. Reske ◽  
K. G. Grillenberger
Keyword(s):  
Synovial Fluid ◽  
Ph Value ◽  
Surgical Removal ◽  
Radiation Synovectomy ◽  
Sulfur Colloid ◽  
Target Organs ◽  
Aseptic Conditions ◽  
In Vitro Stability ◽  
Potential Use

Summary Aim: One therapeutic approach to rheumatoid arthritis and other inflammatory arthropathies besides surgical removal of inflamed synovium is radiation synovectomy using beta-emitting radionuclides to destroy the affected synovial tissue. Up to now the major problem associated with the use of labeled particles or colloids has been considerable leakage of radionuclides from the injected joint coupled with high radiation doses to liver and other non target organs. In this study we compared 188Re labeled hydroxyapatite particles and 188Re rhenium sulfur colloid for their potential use in radiation synovectomy. Methods: To this end we varied the labeling conditions (concentrations, pH-value, heating procedure) and analyzed the labeling yield, radiochemical purity, and in vitro stability of the resulting radiopharmaceutical. Results: After optimizing labeling conditions we achieved a labeling yield of more than 80% for 188Re hydroxyapatite and more than 90% for the rhenium sulfur colloid. Both of the radiopharmaceuticals can be prepared under aseptic conditions using an autoclav for heating without loss of activity. In vitro stability studies using various challenge solutions (water, normal saline, diluted synovial fluid) showed that 188Re labeled hydroxyapatite particles lost about 80% of their activity within 5 d in synovial fluid. Rhenium sulfur colloid on the other hand proved to be very stable with a remaining activity of more than 93% after 5 d in diluted synovial fluid. Conclusion: These in vitro results suggest that 188Re labeled rhenium sulfur colloid expects to be more suitable for therapeutic use in radiation synovectomy than the labeled hydroxyapatite particles.

Controlled Release of Metformin Hydrochloride I. In vitro Release from Physical Mixture Containing Xanthan Gum as Hydrophilic Rate Retarding Polymer

1970 ◽  
Vol 4 (1) ◽  
Author(s):  
Mashkura Ashrafi ◽  
Jakir Ahmed Chowdhury ◽  
Md Selim Reza
Keyword(s):  
Controlled Release ◽  
Xanthan Gum ◽  
In Vitro Release ◽  
Correlation Coefficients ◽  
High Ratio ◽  
Water Soluble ◽  
Metformin Hydrochloride ◽  
Model Drug ◽  
Very High

Capsules of different formulations were prepared by using a hydrophilic polymer, xanthan gum and a filler Ludipress. Metformin hydrochloride, which is an anti-diabetic agent, was used as a model drug here with the aim to formulate sustained release capsules. In the first 6 formulations, metformin hydrochloride and xanthan gum were used in different ratio. Later, Ludipress was added to the formulations in a percentage of 8% to 41%. The total procedure was carried out by physical mixing of the ingredients and filling in capsule shells of size ‘1’. As metformin hydrochloride is a highly water soluble drug, the dissolution test was done in 250 ml distilled water in a thermal shaker (Memmert) with a shaking speed of 50 rpm at 370C &plusmn 0.50C for 6 hours. After the dissolution, the data were treated with different kinetic models. The results found from the graphs and data show that the formulations follow the Higuchian release pattern as they showed correlation coefficients greater than 0.99 and the sustaining effect of the formulations was very high when the xanthan gum was used in a very high ratio with the drug. It was also investigated that the Ludipress extended the sustaining effect of the formulation to some extent. But after a certain period, Ludipress did not show any significant effect as the pores made by the xanthan gum network were already blocked. It is found here that when the metformin hydrochloride and the xanthan gum ratio was 1:1, showed a high percentage of drug release, i.e. 91.80% of drug was released after 6 hours. But With a xanthan gum and metformin hydrochloride ratio of 6:1, a very slow release of the drug was obtained. Only 66.68% of the drug was released after 6 hours. The percent loading in this case was 14%. Again, when Ludipress was used in high ratio, it was found to retard the release rate more prominently. Key words: Metformin Hydrochloride, Xanthan Gum, Controlled release capsule Dhaka Univ. J. Pharm. Sci. Vol.4(1) 2005 The full text is of this article is available at the Dhaka Univ. J. Pharm. Sci. website

The In Vitro Antibiofilm Activity of Water Leaf Extract of Papaya (Carica papaya L.) against Pseudomonas aeruginosa

2017 ◽  
Vol 2 (3) ◽  
pp. 150-163
Author(s):  
Ekajayanti Kining ◽  
Syamsul Falah ◽  
Novik Nurhidayat
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Contact Time ◽  
Cell Attachment ◽  
Water Extract ◽  
Opportunistic Pathogen ◽  
Bacterial Biofilm ◽  
Antibiofilm Activity ◽  
Bacterial Survival ◽  
Optimum Conditions

Pseudomonas aeruginosa is one of opportunistic pathogen forming bacterial biofilm. The biofilm sustains the bacterial survival and infections. This study aimed to assess the activity of water extract of papaya leaves on inhibition of cells attachment, growth and degradation of the biofilm using crystal violet (CV) biofilm assay. Research results showed that water extract of papaya leaves contains alkaloids, tanins, flavonoids, and steroids/terpenoids and showed antibacterial activity and antibiofilm against P. aeruginosa. Addition of extract can inhibit the cell attachment and was able to degrade the biofilm of 40.92% and 48.058% respectively at optimum conditions: extract concentration of 25% (v/v), temperature 37.5 °C and contact time 45 minutes. With a concentration of 25% (v/v), temperature of 50 °C and the contact time of 3 days, extract of papaya leaves can inhibit the growth of biofilms of 39.837% v/v.

Sign in / Sign up

Export Citation Format

Share Document