scholarly journals Structural Integrity of Polymeric Components Produced by Additive Manufacturing (AM)—Polymer Applications

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4420
Author(s):  
Rui F. Martins ◽  
Ricardo Branco ◽  
Filippo Berto ◽  
Nuno Soares ◽  
Sebastião Bandeira
Keyword(s):  
Additive Manufacturing ◽  
Structural Integrity ◽  
Fused Deposition Modelling ◽  
Mass Reduction ◽  
The Finite Element Method ◽  
Fused Deposition ◽  
Major Constraint ◽  
3D Printed ◽  
Fit For Purpose ◽  
Functional Components

In the work presented herein, the structural integrity of polymeric functional components made of Nylon-645 and Polylactic acid (PLA) produced by additive manufacturing (Fused Deposition Modelling, FDM) is studied. The PLA component under study was selected from the production line of a brewing company, and it was redesigned and analyzed using the Finite Element Method, 3D printed, and installed under real service. The results obtained indicated that, even though the durability of the 3D printed part was lower than the original, savings of about EUR 7000 a year could be achieved for the component studied. Moreover, it was shown that widespread use of AM with other specific PLA components could result in even more significant savings. Additionally, a metallic hanger (2700 kg/m3) from the cockpit of an airplane ATR 70 series 500 was successfully redesigned and additively manufactured in Nylon 645, resulting in a mass reduction of approximately 60% while maintaining its fit-for-purpose. Therefore, the components produced by FDM were used as fully functional components rather than prototype models, which is frequently stated as a major constraint of the FDM process.

scholarly journals Strength Comparison of FDM 3D Printed PLA Made by Different Manufacturers

TEM Journal ◽  
2020 ◽  
pp. 966-970
Author(s):  
Damir Hodžić ◽  
Adi Pandžić ◽  
Ismar Hajro ◽  
Petar Tasić
Keyword(s):  
Experimental Study ◽  
Additive Manufacturing ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
Manufacturing Technique ◽  
Plastic Materials ◽  
Wide Range ◽  
3D Printed ◽  
The Difference ◽  
Printing Parameters

Widely used additive manufacturing technique for plastic materials is Fused Deposition Modelling (FDM). The FDM technology has gained interest in industry for a wide range of applications, especially today when large number of different materials on the market are available. There are many different manufacturers for the same FDM material where the difference in price goes up to 50%. This experimental study investigates possible difference in strength of the 3D printed PLA material of five different manufacturers. All specimens are 3D printed on Ultimaker S5 printer with the same printing parameters, and they are all the same colour.

scholarly journals Surface Preparation and Treatment for Large-Scale 3D-Printed Composite Tooling Coating Adhesion

Coatings ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 457 ◽  
Author(s):  
Philipp Sauerbier ◽  
James Anderson ◽  
Douglas Gardner
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Lower Cost ◽  
Numerical Control ◽  
Fused Deposition Modelling ◽  
Filler Materials ◽  
Coating Adhesion ◽  
Fused Deposition ◽  
Composite Tooling ◽  
3D Printed

Recent advances in large-scale thermoplastic additive manufacturing (AM), using fused deposition modelling (FDM), have shown that the technology can effectively produce large aerospace tools with common feed stocks, costing 2.3 $/kg, such as a 20% carbon-filled acrylonitrile butadiene styrene (ABS). Large-scale additive manufacturing machines have build-volumes in the range of cubic meters and use commercially available pellet feedstock thermoplastics, which are significantly cheaper (5–10 $/kg) than the filament feedstocks for desktop 3D printers (20–50 $/kg). Additionally, large-scale AM machines have a higher material throughput on the order of 50 kg/h. This enables the cost-efficient tool production for several industries. Large-scale 3D-printed tooling will be computerized numerical control (CNC)-machined and -coated, to provide a surface suitable for demolding the composite parts. This paper outlines research undertaken to review and improve the adhesion of the coating systems to large, low-cost AM composite tooling, for marine or infrastructure composite applications. Lower cost tooling systems typically have a lower dimensional accuracy and thermal operating requirements than might be required for aerospace tooling. As such, they can use lower cost commodity grade thermoplastics. The polymer systems explored in the study included polypropylene (PP), styrene-maleic anhydride (SMA), and polylactic acid (PLA). Bio-based filler materials were used to reduce cost and increase the strength and stiffness of the material. Fillers used in the study included wood flour, at 30% by weight and spray-dried cellulose nano-fibrils, at 20% by weight. Applicable adhesion of the coating was achieved with PP, after surface treatment, and untreated SMA and PLA showed desirable coating adhesion results. PLA wood-filled composites offered the best properties for the desired application and, furthermore, they have environment-friendly advantages.

scholarly journals Effect of Perforation Volume on Acoustic Absorption of the 3D Printed Micro-Perforated Panels made of Polylactic Acid reinforced with Wood Fibers

2021 ◽  
Vol 2120 (1) ◽  
pp. 012039
Author(s):  
V Sekar ◽  
S Y Eh Noum ◽  
S Sivanesan ◽  
A Putra ◽  
Dg H Kassim ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Polylactic Acid ◽  
Natural Fiber ◽  
Fused Deposition Modelling ◽  
Acoustic Absorption ◽  
Wood Fibers ◽  
Fused Deposition ◽  
3D Printed ◽  
Almost All ◽  
Impedance Tube Method

Abstract In recent times, Additive Manufacturing (AM) has been applied rapidly in almost all fields. This study was conducted to apply the additive manufacturing into an acoustic application by 3D printing the Micro-Perforated Panels (MPP) through Fused Deposition Modelling (FDM) made of Polylactic Acid (PLA) reinforced with wood fibers. MPP were fabricated by altering its perforation volume. Later, the effect of perforation volume on acoustic absorption of the fabricated MPP was measured using the two-microphone impedance tube method as per ISO 10534-2 standard. The result shows altering the perforation volume affects the acoustic absorption of the MPP. MPP with a thickness of 2 mm and a perforation diameter of 0.2 mm shows the maximum sound absorption coefficient of 0.93 at 2173 Hz. It is made possible to absorb the 3D printed MPP made of natural fiber reinforced composite at different spectrums by altering the perforation volume.

Additive Manufacturing of Complex Shapes Through Weld-Deposition and Feature Based Slicing

2015 ◽  
Author(s):  
Jayaprakash Sharma Panchagnula ◽  
Suryakumar Simhambhatla
Keyword(s):  
Additive Manufacturing ◽  
Energy Deposition ◽  
Fused Deposition Modelling ◽  
Cad Model ◽  
Direct Energy Deposition ◽  
Fused Deposition ◽  
Direct Energy ◽  
Feature Based ◽  
Deposition Processes ◽  
Functional Components

Fabricating fully dense and functional metallic components is one of the important challenges in Additive Manufacturing (AM). Additive Manufacturing is a technology in which functional components can be fabricated rapidly and efficiently from their CAD models. It is also referred as Layered Manufacturing (LM) as the object is created by slicing the CAD model into layers and realizing each layer at a time. These layers are thin and stacked or glued together to get the physical shape of the CAD model. However, realizing overhanging features is a difficult task due to deficiency of support mechanism for metals. A separate support structure has to be deposited to build overhanging structures. Although, use of a distinct support material is quite common in non-metallic AM processes, such as Fused Deposition Modelling (FDM), and the same for metals is not yet available. The various techniques in AM process for fabricating metal parts can be mainly classified as laser based, electron beam based and arc based processes. While some Additive Manufacturing processes like Selective Laser Sintering (SLS) employ easily-breakable-scaffolds made of same material to realize the overhanging features, the same approach cannot be extended to deposition processes like laser or arc based direct energy deposition processes. Even though it is possible to realize small overhangs by exploiting the inherent overhanging capability of the process or by blinding some small features like holes, the same cannot be extended for more complex geometries. A different approach to solve this problem is feature based slicing. Unlike uniform and adaptive slicing techniques, where the thickness of a given slice is constant, in feature based slicing inclined slicing; the thickness varies even within a given slice, based on its feature. The current work presents a novel approach for realizing complex overhanging features without the need of support structures. This can be possible by using higher axis kinematics or by adding extra degrees of mobility to the work piece or to the deposition system and suitably aligning the overhang with the deposition direction. Some Vital concepts required in realizing and depositing overhangs are feature based non-uniform slicing and non-uniform area-filling and the same are briefly discussed here. This research will summarize the issues and related approaches in the research, development, and integration. This includes understanding of the weld deposition process by establishing proper geometries, and automated process planning. This technique can be used to fabricate or repair fully dense and functional components for various engineering applications. Although this approach has been implemented for weld-deposition based system, the same can be extended to any other direct energy deposition processes also.

scholarly journals A design of experiment approach to 3D-printed mouthpieces sound analysis

2021 ◽  
Author(s):  
Antonio Bacciaglia ◽  
Alessandro Ceruti ◽  
Alfredo Liverani
Keyword(s):  
Additive Manufacturing ◽  
Design Of Experiment ◽  
Musical Instruments ◽  
Rapid Expansion ◽  
Fused Deposition Modelling ◽  
Layer By Layer ◽  
Fused Deposition ◽  
3D Printed ◽  
Processing Techniques ◽  
Short Time

AbstractNowadays additive manufacturing is affected by a rapid expansion of possible applications. It is defined as a set of technologies that allow the production of components from 3D digital models in a short time by adding material layer by layer. It shows enormous potential to support wind musical instruments manufacturing because the design of complex shapes could produce unexplored and unconventional sounds, together with external customization capabilities. The change in the production process, material and shape could affect the resulting sound. This work aims to compare the music performances of 3D-printed trombone mouthpieces using both Fused Deposition Modelling and Stereolithography techniques, compared to the commercial brass one. The quantitative comparison is made applying a Design of Experiment methodology, to detect the main additive manufacturing parameters that affect the sound quality. Digital audio processing techniques, such as spectral analysis, cross-correlation and psychoacoustic analysis in terms of loudness, roughness and fluctuation strength have been applied to evaluate sounds. The methodology herein applied could be used as a standard for future studies on additively manufactured musical instruments.

scholarly journals Surface Roughness Effect on the 3d Printed Butt Joints Strength

2015 ◽  
Author(s):  
V. Kovan ◽  
G. Altan ◽  
E.S. Topal ◽  
H.E. Camurlu
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Three Dimensional ◽  
Thickness Effect ◽  
Fused Deposition Modelling ◽  
Three Dimensional Printing ◽  
Fused Deposition ◽  
3D Printed ◽  
Dimensional Object

Three-dimensional printing or 3D printing (also called additive manufacturing) is any of various processes used to make a three-dimensional object. Fused deposition modelling (FDM) is an additive manufacturing technology commonly used for modelling, prototyping, and production applications. It is one of the techniques used for 3D printing. FDM is somewhat restricted in the size and the variation of shapes that may be fabricated. For parts too large to fit on a single build, for faster job builds with less support material, or for parts with finer features, sectioning and bonding FDM parts is a great solution. The strength of adhesive bonded FDM parts is affected by the surface roughness. In this study, the layer thickness effect on bonding strength is experimentally studied and the results are discussed.

scholarly journals 3D printed fluidics with embedded analytic functionality for automated reaction optimisation

2017 ◽  
Vol 13 ◽  
pp. 111-119 ◽  
Author(s):  
Andrew J Capel ◽  
Andrew Wright ◽  
Matthew J Harding ◽  
George W Weaver ◽  
Yuqi Li ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Reaction Medium ◽  
Flow Chemistry ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
Fluidic Devices ◽  
3D Printed ◽  
Solvent Systems ◽  
Temperature And Pressure ◽  
Set Up

Additive manufacturing or ‘3D printing’ is being developed as a novel manufacturing process for the production of bespoke micro- and milliscale fluidic devices. When coupled with online monitoring and optimisation software, this offers an advanced, customised method for performing automated chemical synthesis. This paper reports the use of two additive manufacturing processes, stereolithography and selective laser melting, to create multifunctional fluidic devices with embedded reaction monitoring capability. The selectively laser melted parts are the first published examples of multifunctional 3D printed metal fluidic devices. These devices allow high temperature and pressure chemistry to be performed in solvent systems destructive to the majority of devices manufactured via stereolithography, polymer jetting and fused deposition modelling processes previously utilised for this application. These devices were integrated with commercially available flow chemistry, chromatographic and spectroscopic analysis equipment, allowing automated online and inline optimisation of the reaction medium. This set-up allowed the optimisation of two reactions, a ketone functional group interconversion and a fused polycyclic heterocycle formation, via spectroscopic and chromatographic analysis.

scholarly journals Sustainability in additive manufacturing: Exploring the mechanical potential of recycled PET filaments

2021 ◽  
Vol 30 ◽  
pp. 263498332110000
Author(s):  
Helge Schneevogt ◽  
Kevin Stelzner ◽  
Buket Yilmaz ◽  
Bilen Emek Abali ◽  
André Klunker ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Polyethylene Terephthalate ◽  
Mechanical Performance ◽  
Fused Deposition Modelling ◽  
Recycled Pet ◽  
Fused Deposition ◽  
Recycled Polyethylene ◽  
3D Printed ◽  
Sustainable Materials

Herein, the effects of recycled polymers on the mechanical properties of additively manufactured specimens, specifically those derived by fused deposition modelling, are determined. The intention is to investigate how 3D-printing can be more sustainable and how recycled polymers compare against conventional ones. Initially, sustainability is discussed in general and more sustainable materials such as recycled filaments and biodegradable filaments are introduced. Subsequently, a comparison of the recycled filament recycled Polyethylene terephthalate (rePET) and a conventional Polyethylene terephthalate with glycol (PETG) filament is drawn upon their mechanical performance under tension, and the geometry and slicing strategy for the 3D-printed specimens is discussed. Finally, the outcomes from the experiments are compared against numerically determined results and conclusions are drawn.

Effect of Processing Parameters on Mechanical Properties of 3D Printed Samples

2018 ◽  
Vol 919 ◽  
pp. 230-235 ◽  
Author(s):  
Jaroslav Maloch ◽  
Eva Hnátková ◽  
Milan Žaludek ◽  
Petr Krátký
Keyword(s):  
Mechanical Properties ◽  
Low Cost ◽  
Flexural Modulus ◽  
Acrylonitrile Butadiene Styrene ◽  
Processing Parameters ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
3D Printed ◽  
Manufacturing Technologies ◽  
Functional Components

3D printing technology enables the production of functional components in small quantities which can be used as end-use parts. The mechanical properties of the final product define its quality and determine its success or failure in a given application. One at the various additive manufacturing technologies - Fused Deposition Modelling is very often used due to its relatively low cost and the availability of 3D printers and thermoplastic materials. During the process, there are many factors that can affect the mechanical properties of the final product. The temperature of the extrusion nozzle and the layer thickness are two of the basic process parameters. The objective of this work is to investigate the effect of these two processing parameters on the final mechanical properties of the 3D printed samples from acrylonitrile butadiene styrene. Mechanical testing includes the tensile and flexural strength, as well as tensile and flexural modulus.

Sign in / Sign up

Export Citation Format

Share Document