scholarly journals Ultrasensitive Ti3C2TX MXene/Chitosan Nanocomposite-Based Amperometric Biosensor for Detection of Potential Prostate Cancer Marker in Urine Samples

Processes ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 580 ◽  
Author(s):  
Stefania Hroncekova ◽  
Tomas Bertok ◽  
Michal Hires ◽  
Eduard Jane ◽  
Lenka Lorencova ◽  
...  
Keyword(s):  
Prostate Cancer ◽  
Two Dimensional ◽  
High Recovery ◽  
Short Response Time ◽  
Force Microscopy ◽  
Atomic Force ◽  
Recovery Index ◽  
Afm Analysis ◽  
First Time ◽  
Relevant Range

Two-dimensional layered nanomaterial Ti3C2TX (a member of the MXene family) was used to immobilise enzyme sarcosine oxidase to fabricate a nanostructured biosensor. The device was applied for detection of sarcosine, a potential prostate cancer biomarker, in urine for the first time. The morphology and structures of MXene have been characterised by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Electrochemical measurements, SEM and AFM analysis revealed that MXene interfaced with chitosan is an excellent support for enzyme immobilisation to fabricate a sensitive biosensor exhibiting a low detection limit of 18 nM and a linear range up to 7.8 µM. The proposed biosensing method also provides a short response time of 2 s and high recovery index of 102.6% for detection of sarcosine spiked into urine sample in a clinically relevant range.

Investigation of growth modes of manganese mercury thiocyanate crystal by atomic force microscopy

2006 ◽  
Vol 39 (1) ◽  
pp. 53-56 ◽  
Author(s):  
Y. L. Geng ◽  
D. Xu ◽  
X. Q. Wang ◽  
X. Q. Hou ◽  
W. F. Guo ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Defect Formation ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Force Microscopy ◽  
Atomic Force ◽  
Growth Modes ◽  
First Time ◽  
Cover Up ◽  
Extra Stress

The growth mechanism and defect formation of the {110} faces of manganese mercury thiocyanate crystals were investigated by atomic force microscopy. A dislocation-controlled mechanism and a two-dimensional nucleation mechanism operate simultaneously during growth. Previous observations showed that two-dimensional nuclei appeared at interstep terraces of spiral hillocks. In this work, it is found for the first time that layers of two-dimensional islands cover up the outcrops of screw dislocations. The spiral hillocks grow fast along the 〈114〉 directions, which is probably due to the small interplanar distances of the {114} faces. Two-dimensional islands often appear as pairs of islands of nearly the same size, at the larger step terraces. Crystallization of the liquid inclusions occurs during the separation of the sample from the mother solution. Small three-dimensional islands, in high density, induce extra stress, which subsequently generates after-growth dislocations.

scholarly journals High resolution nanoscale chemical analysis of bitumen surface microstructures

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ayse N. Koyun ◽  
Julia Zakel ◽  
Sven Kayser ◽  
Hartmut Stadler ◽  
Frank N. Keutsch ◽  
...  
Keyword(s):  
Secondary Ion Mass Spectrometry ◽  
Force Microscopy ◽  
Photo Oxidation ◽  
Atomic Force ◽  
Para Phase ◽  
Key Sites ◽  
Respective Surface ◽  
Surface Domains ◽  
Surface Microstructures ◽  
First Time

AbstractSurface microstructures of bitumen are key sites in atmospheric photo-oxidation leading to changes in the mechanical properties and finally resulting in cracking and rutting of the material. Investigations at the nanoscale remain challenging. Conventional combination of optical microscopy and spectroscopy cannot resolve the submicrostructures due to the Abbe restriction. For the first time, we report here respective surface domains, namely catana, peri and para phases, correlated to distinct molecules using combinations of atomic force microscopy with infrared spectroscopy and with correlative time of flight—secondary ion mass spectrometry. Chemical heterogeneities on the surface lead to selective oxidation due to their varying susceptibility to photo-oxidation. It was found, that highly oxidized compounds, are preferentially situated in the para phase, which are mainly asphaltenes, emphasising their high oxidizability. This is an impressive example how chemical visualization allows elucidation of the submicrostructures and explains their response to reactive oxygen species from the atmosphere.

scholarly journals Back to Nature: Combating Candida albicans Biofilm, Phospholipase and Hemolysin Using Plant Essential Oils

Antibiotics ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 81
Author(s):  
Ahmed M. El-Baz ◽  
Rasha A. Mosbah ◽  
Reham M. Goda ◽  
Basem Mansour ◽  
Taranum Sultana ◽  
...  
Keyword(s):  
Candida Albicans ◽  
Essential Oils ◽  
Docking Study ◽  
New Drugs ◽  
Molecular Docking Study ◽  
Plant Essential Oils ◽  
Force Microscopy ◽  
Atomic Force ◽  
Afm Analysis ◽  
Phenotypic Methods

Candida albicans is the causative agent of fatal systemic candidiasis. Due to limitations of antifungals, new drugs are needed. The anti-virulence effect of plant essential oils (EOs) was evaluated against clinical C. albicans isolates including cinnamon, clove, jasmine and rosemary oils. Biofilm, phospholipase and hemolysin were assessed phenotypically. EOs were evaluated for their anti-virulence activity using phenotypic methods as well as scanning electron microscopy (SEM) and atomic force microscopy (AFM). Among the C. albicans isolates, biofilm, phospholipase and hemolysins were detected in 40.4, 86.5 and 78.8% of isolates, respectively. Jasmine oil showed the highest anti-biofilm activity followed by cinnamon, clove and rosemary oils. SEM and AFM analysis showed reduced adherence and roughness in the presence of EOs. For phospholipase, rosemary oil was the most inhibitory, followed by jasmine, cinnamon and clove oils, and for hemolysins, cinnamon had the highest inhibition followed by jasmine, rosemary and clove oils. A molecular docking study revealed major EO constituents as promising inhibitors of the Als3 adhesive protein, with the highest binding for eugenol, followed by 1,8-cineole, 2-phenylthiolane and cinnamaldehyde. In conclusion, EOs have a promising inhibitory impact on Candida biofilm, phospholipase and hemolysin production, hence EOs could be used as potential antifungals that impact virulence factors.

Preparation and Characterization of Chitosan-Casein Phosphopeptides Biocomposite Coatings on the Medical Titanium Alloy

2011 ◽  
Vol 480-481 ◽  
pp. 1065-1069
Author(s):  
Bin Liu ◽  
Lin Wang ◽  
Yin Zhong Bu ◽  
Sheng Rong Yang ◽  
Jin Qing Wang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Attenuated Total Reflectance ◽  
Ti Alloy ◽  
Force Microscopy ◽  
Implant Materials ◽  
Atomic Force ◽  
Casein Phosphopeptides ◽  
Potential Applications ◽  
First Time

Titanium (Ti) and its alloys have been applied in orthopedics as one of the most popular biomedical metallic implant materials. In this work, to enhance the bioactivity, the surface of Ti alloy pre-modified by silane coupling agent and glutaraldehyde was covalently grafted with chitosan (CS) via biochemical multistep self-assembled method. Then, for the first time, the achieved surface was further immobilized with casein phosphopeptides (CPP), which are one group of bioactive peptides released from caseins in the digestive tract and can facilitate the calcium adsorption and usage, to form CS-CPP biocomposite coatings. The structure and composition of the fabricated coatings were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and atomic force microscopy (AFM). As the experimental results indicated, multi-step assembly was successfully performed, and the CS and CPP were assembled onto the Ti alloy surface orderly. It is anticipated that the Ti alloys modified by CS-CPP biocomposite coatings will find potential applications as implant materials in biomedical fields.

Coupling In-Situ Techniques to Analyze Zinc Deposition and Dissolution for Energy Storage Applications

2013 ◽  
Vol 1491 ◽  
Author(s):  
Jayme Keist ◽  
Christine Orme ◽  
Frances Ross ◽  
Dan Steingart ◽  
Paul Wright ◽  
...  
Keyword(s):  
Liquid Electrolyte ◽  
Scattering Data ◽  
Zinc Deposition ◽  
Ionic Liquid Electrolyte ◽  
Force Microscopy ◽  
In Situ Techniques ◽  
X Ray Scattering ◽  
Atomic Force ◽  
Afm Analysis

ABSTRACTThis investigation describes preliminary results of in-situ analysis of zinc deposition within an ionic liquid electrolyte utilizing electrochemical atomic force microscopy (EC AFM). From the AFM analysis, the morphology of the zinc deposition was analyzed by quantifying the surface roughness using height-height correlation functions. These results will be used to analyze the scattering data obtained from zinc deposition analysis utilizing an electrochemical ultra-small angle x-ray scattering (EC USAXS). The goal of this research is to link the early nucleation and growth behavior to the formation of detrimental morphologies.

Self-assembly layer-by-layer fabrication using porphyrin dye anion and polycation

2009 ◽  
Vol 13 (07) ◽  
pp. 774-778 ◽  
Author(s):  
Byung-Soon Kim ◽  
Young-A Son
Keyword(s):  
Ultrathin Films ◽  
Self Assembly ◽  
Film Surface ◽  
Layer By Layer ◽  
Preparation Technique ◽  
Force Microscopy ◽  
Atomic Force ◽  
Diallyldimethylammonium Chloride ◽  
Afm Analysis ◽  
Progressive Growth

In this study, self-assembled alternating film using poly(diallyldimethylammonium chloride) (PDDAC) and meso-tetrakis(4-carboxyphenyl)porphyrin (MTCP) was prepared as a multilayer deposition on glass substrate. This preparation technique for dye deposition may provide new feasibilities to achieve the manufacture of ultrathin films for nanotechnology application. The deposition films were characterized by UV-vis spectrophotometer and Atomic Force Microscopy (AFM) analysis. The results of UV-vis spectra showed that the absorbance characteristic of the multilayer films linearly increased with an increased number of PDDAC and MTCP bilayers. AFM analysis showed the film surface was relatively uniform and the progressive growth of layers was determined.

scholarly journals Microwave Spectroscopic Detection of Human Hsp70 Protein on Annealed Gold Nanostructures on ITO Glass Strips

Biosensors ◽  
2018 ◽  
Vol 8 (4) ◽  
pp. 118
Author(s):  
Rodica Ionescu ◽  
Raphael Selon ◽  
Nicolas Pocholle ◽  
Lan Zhou ◽  
Anna Rumyantseva ◽  
...  
Keyword(s):  
Indium Tin Oxide ◽  
Stress Disorders ◽  
Force Microscopy ◽  
Glass Substrates ◽  
Conductive Glass ◽  
Hsp70 Protein ◽  
Atomic Force ◽  
Ito Glass ◽  
First Time ◽  
Human Heat Shock Protein

Conductive indium-tin oxide (ITO) and non-conductive glass substrates were successfully modified with embedded gold nanoparticles (AuNPs) formed by controlled thermal annealing at 550 °C for 8 h in a preselected oven. The authors characterized the formation of AuNPs using two microscopic techniques: scanning electron microscopy (SEM) and atomic force microscopy (AFM). The analytical performances of the nanostructured-glasses were compared regarding biosensing of Hsp70, an ATP-driven molecular chaperone. In this work, the human heat-shock protein (Hsp70), was chosen as a model biomarker of body stress disorders for microwave spectroscopic investigations. It was found that microwave screening at 4 GHz allowed for the first time the detection of 12 ng/µL/cm2 of Hsp70.

scholarly journals Marrying Medicine and Materials: Artemisinin (Qinghaosu) Particle is Soft Enough for Scratching Hard SiC Wafer in Water

2016 ◽  
Author(s):  
Yu-rong Zhu ◽  
Dan Zhang ◽  
Yang Gan ◽  
Fei-hu Zhang
Keyword(s):  
Pure Water ◽  
High Hardness ◽  
Underlying Mechanism ◽  
Molecular Solids ◽  
High Brightness ◽  
Force Microscopy ◽  
Atomic Force ◽  
Chemical Inertness ◽  
Sic Wafer ◽  
First Time

<p>Silicon carbide (SiC) single crystals, along with sapphire and silicon, are one of most important substrates for high-brightness LED fabrications. Owing to extremely high hardness (Mohs&rsquo; scale of 9.5) and chemical inertness, the polishing rate of SiC with conventional chemical mechanical polishing (CMP) methods is not high, and surface scratches are also inevitable because of using slurry containing hard abrasives such as silica particles. Here artemisinin (Qinghaosu) crystals, very soft molecular solids, were found, for the first time to the best of our knowledge, to effectively polish SiC wafers even in pure water as demonstrated by proof-of-concept scratching experiments using atomic force microscopy (AFM). The underlying mechanism is attributed to activated oxidation of SiC by mechanically released reactive &middot;OH free radicals from the endoperoxide bridges. The preliminary results reported here have important implications for developing novel alternative green and scratch-free polishing methods for hard-brittle substrates including SiC and others.</p>

scholarly journals Tip-Based Nanomachining on Thin Films: A Mini Review

2021 ◽  
Author(s):  
Shunyu Chang ◽  
Yanquan Geng ◽  
Yongda Yan
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Data Storage ◽  
Three Dimensional ◽  
Maintenance Cost ◽  
Two Dimensional ◽  
Force Microscopy ◽  
Atomic Force ◽  
Current State ◽  
Two Dimensional Materials

AbstractAs one of the most widely used nanofabrication methods, the atomic force microscopy (AFM) tip-based nanomachining technique offers important advantages, including nanoscale manipulation accuracy, low maintenance cost, and flexible experimental operation. This technique has been applied to one-, two-, and even three-dimensional nanomachining patterns on thin films made of polymers, metals, and two-dimensional materials. These structures are widely used in the fields of nanooptics, nanoelectronics, data storage, super lubrication, and so forth. Moreover, they are believed to have a wide application in other fields, and their possible industrialization may be realized in the future. In this work, the current state of the research into the use of the AFM tip-based nanomachining method in thin-film machining is presented. First, the state of the structures machined on thin films is reviewed according to the type of thin-film materials (i.e., polymers, metals, and two-dimensional materials). Second, the related applications of tip-based nanomachining to film machining are presented. Finally, the current situation of this area and its potential development direction are discussed. This review is expected to enrich the understanding of the research status of the use of the tip-based nanomachining method in thin-film machining and ultimately broaden its application.

Sign in / Sign up

Export Citation Format

Share Document