scholarly journals Impact-Damage Equivalency for Twisted Composite Blades with Symmetrical Configurations

Symmetry ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1292 ◽  
Author(s):  
Yadong Zhou ◽  
Youchao Sun ◽  
Tianlin Huang
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Civil Aviation ◽  
Flat Plates ◽  
Design Guideline ◽  
Particle Hydrodynamics ◽  
Bird Impact ◽  
Damage Maps ◽  
The Impact ◽  
Composite Blades

In spite of potential advantages for aircraft structures, composite laminates can be subjected to bird-strike hazard in civil aviation. For purpose of future surrogate experiments, in this study, impact-damage equivalency for twisted composite blades is numerically investigated by Smoothed Particle Hydrodynamics (SPH) and finite element method (FEM). Cantilever slender flat plates are usually used for basic impact tests, the impact-damage equivalency is being considered by comparing damage modes and energies of three impact configurations: (1) twisted blade; (2) flat blade (axisymmetric); and (3) inclined flat blade (centrosymmetric). The damage maps and energy variations were comparatively investigated. Results indicate that both symmetrical flat and inclined flat blades can be, to a certain extent, regarded as alternatives for real twisted blades under bird impact; however, both types of blade have their own merits and drawbacks, and hence should be used carefully. These results aim to serve as tentative design guideline for future prototype or model experimental study of laminated blades in real aeronautical structures.

scholarly journals Bird-Strike Resistance of Composite Laminates with Different Materials

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 129 ◽  
Author(s):  
Yadong Zhou ◽  
Youchao Sun ◽  
Tianlin Huang
Keyword(s):  
Composite Materials ◽  
Composite Laminates ◽  
Impact Damage ◽  
Dynamic Properties ◽  
Dynamic Structure ◽  
Strength Properties ◽  
Bird Strike ◽  
Particle Hydrodynamics ◽  
Bird Impact ◽  
The Impact

To obtain some basic laws for bird-strike resistance of composite materials in aeronautical application, the high-velocity impact behaviors of composite laminates with different materials were studied by numerical methods. The smoothed particle hydrodynamics (SPH) and finite element method (FEM) coupling models were validated from various perspectives, and the numerical results were comparatively investigated. Results show that the different composite materials have relatively little effect on projectile deformations during the bird impact. However, the impact-damage distributions can be significantly different for different composite materials. The strength parameters and fracture energy parameters play different roles in different damage modes. Lastly, modal frequency was tentatively used to explain the damage behavior of the composite laminates, for it can manifest the mass and stiffness characteristics of a dynamic structure. The dynamic properties and strength properties jointly determine the impact-damage resistance of composite laminates under bird strike. Future optimization study can be considered from these two aspects.

scholarly journals Evaluating Impact Damage of Flat Composite Plate for Surrogate Bird-Strike Testing of Aeroengine Fan Blade

2021 ◽  
Vol 5 (7) ◽  
pp. 171
Author(s):  
Youchao Sun ◽  
Yuemei Zhang ◽  
Yadong Zhou ◽  
Haitao Zhang ◽  
Haijun Zeng ◽  
...  
Keyword(s):  
Boundary Condition ◽  
Composite Laminates ◽  
Impact Damage ◽  
Numerical Models ◽  
Damage Mechanism ◽  
Bird Strike ◽  
Mechanism Study ◽  
Flat Plates ◽  
Particle Hydrodynamics ◽  
The Impact

Bird-strike failure of fan blades is one of the basic challenges for the safety of aircraft engines. Simplified flat blade-like plates are always used for damage mechanism study of composite laminates. One undesirable issue is the failure at the root of clamped flat plates under high-velocity impact. For this purpose, two different strategies were exploited to obtain desirable impact damage distributions, namely the impact location and the boundary condition. Numerical models of the simplified flat blade-like plate and the bird projectile were constructed by using finite element method (FEM) and smoothed particle hydrodynamics (SPH) approaches. The impact damage distributions were comparatively investigated in detail. The numerical results show that changing the boundary condition is the most effective way to obtain preferable impact damages for further failure analysis of real fan blades. Present results will be useful to the future surrogate experimental design of simplified bird-strike testing.

scholarly journals SPH-FEM Design of Laminated Plies under Bird-Strike Impact

Aerospace ◽  
2019 ◽  
Vol 6 (10) ◽  
pp. 112 ◽  
Author(s):  
Yadong Zhou ◽  
Youchao Sun ◽  
Tianlin Huang
Keyword(s):  
Composite Laminates ◽  
Damage Mechanics ◽  
Impact Damage ◽  
Continuum Damage Mechanics ◽  
Civil Aviation ◽  
Bird Strike ◽  
Design Guideline ◽  
Damage Initiation ◽  
The Impact ◽  
Laminated Structures

Composite laminates can potentially reduce the weight of aircrafts; however, they are subjected to bird strike hazards in civil aviation. To handle their nonlinear dynamic behaviour, in this study, the impact damage of composite laminates were numerically evaluated and designed by means of smoothed particle hydrodynamics (SPH) and the finite element method (FEM) to simulate the interaction between bird projectiles and the laminates. Attention was mainly focused on the different damage modes in various laminates’ plies induced by bird impact on a square laminated plate. A continuum damage mechanics approach was exploited to simulate damage initiation and evolution in composite laminates. Damage maps were computed with respect to different ply angles, i.e., 0°, 45° and −45°. The damage distributions were comparatively investigated, and then the ply design was considered for crashworthiness improvement. The results aim to serve as a design guideline for future prototype-scale bird strike studies of complex laminated structures.

IMPACT RESISTANCE PROPERTIES OF KEVLAR/GLASS FIBER HYBRID COMPOSITE LAMINATES

2015 ◽  
Vol 76 (3) ◽  
Author(s):  
Norazean Shaari ◽  
Aidah Jumahat ◽  
M. Khafiz M. Razif
Keyword(s):  
Glass Fiber ◽  
Hybrid Composite ◽  
Composite Laminates ◽  
Impact Damage ◽  
Impact Resistance ◽  
Impact Behavior ◽  
Slight Reduction ◽  
Depth Of Penetration ◽  
Damage Degree ◽  
The Impact

In this paper, the impact behavior of Kevlar/glass fiber hybrid composite laminates was investigated by performing the drop weight impact test (ASTM D7136). Composite laminates were fabricated using vacuum bagging process with an epoxy matrix reinforced with twill Kevlar woven fiber and plain glass woven fiber. Four different types of composite laminates with different ratios of Kevlar to glass fiber (0:100, 20:80, 50:50 and 100:0) were manufactured. The effect of Kevlar/glass fiber content on the impact damage behavior was studied at 43J nominal impact energy. Results indicated that hybridization of Kevlar fiber to glass fiber improved the load carrying capability, energy absorbed and damage degree of composite laminates with a slight reduction in deflection. These results were further supported through the damage pattern analysis, depth of penetration and X-ray evaluation tests. Based on literature work, studies that have been done to investigate the impact behaviour of woven Kevlar/glass fiber hybrid composite laminates are very limited. Therefore, this research concentrates on the effect of Kevlar on the impact resistance properties of woven glass fibre reinforced polymer composites.

Experimental investigation on a fully thermoplastic composite subjected to repeated impacts

2019 ◽  
Vol 233 (19-20) ◽  
pp. 6985-7002
Author(s):  
S Boria ◽  
A Scattina ◽  
G Belingardi
Keyword(s):  
Composite Laminates ◽  
Mechanical Performance ◽  
Impact Damage ◽  
Energy Levels ◽  
Thermoplastic Composite ◽  
Thermoplastic Composites ◽  
Low Velocity ◽  
Repeated Impacts ◽  
Structural Parts ◽  
The Impact

In the last years, the spread of composite laminates into the engineering sectors was observed; the main reason lies in higher values of strength/weight and stiffness/weight ratios with respect to conventional materials. Firstly, the attention was focused on fibres reinforced with thermosetting matrix. Then, the necessity to move towards low density and recyclable solutions has implied the development of composites made with thermoplastic matrix. Even if the first application of thermoplastic composites can be found into no structural parts, the replacement of metallic structural parts with such material in areas potentially subjected to impact has become worthy of investigation. Depending on the field of application and on the design geometry, in fact, some components can be subjected to repeated impacts at localized sites either during fabrication, activities of routine maintenance or during service conditions. When composite material was adopted, even though the impact damage associated to the single impact event can be slight, the accumulation of the damage over time may seriously weaken the mechanical performance of the structure. In this overview, the capability of energy absorption of a new composite completely made of thermoplastic material was investigated. This material was able to combine two conflicting requirements: the recyclability and the lightweight. In particular, repeated impacts at low velocity, on self-reinforced laminates made of polypropylene (PP), were conducted by experimental drop dart tests. Repeated impacts up to the perforation or up to 40 times were performed. In the analysis, three different energy levels and three different values of the laminate thicknesses were considered in order to analyse the damage behaviour under various experimental configurations. A visual observation of the impacted specimens was done, in order to evaluate the damage progression. Moreover, the trend of the peak force interchanged between specimen and dart and the evolution of both the absorbed energy and of the bending stiffness with the impacts number were studied. The results pointed out that the maximum load and the stiffness of the specimens tended to grow increasing the number of the repeated impacts. Such trend is opposite compared to the previous results obtained by other researchers using thermosetting composites.

scholarly journals Static Residual Tensile Strength Response of GFRP Composite Laminates Subjected to Low-Velocity Impact

2020 ◽  
Vol 10 (16) ◽  
pp. 5480
Author(s):  
Jong-Il Kim ◽  
Yong-Hak Huh ◽  
Yong-Hwan Kim
Keyword(s):  
Tensile Strength ◽  
Composite Laminates ◽  
Impact Damage ◽  
Image Correlation ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Stress Concentrations ◽  
Low Velocity ◽  
Full Field ◽  
The Impact

The dependency of the static residual tensile strength for the Glass Fiber-Reinforced Plastic (GFRP) laminates after impact on the impact energy level and indent shape is investigated. In this study, two different laminates, unidirectional, [0°2]s) and TRI (tri-axial, (±45°/0°)2]s), were prepared using the vacuum infusion method, and an impact indent on the respective laminates was created at different energy levels with pyramidal and hemispherical impactors. Impact damage patterns, such as matrix cracking, delamination, debonding and fiber breakage, could be observed on the GFRP laminates by a scanning electron microscope (SEM), and it is found that those were dependent on the impactor head shape and laminate structure. Residual in-plane tensile strength of the impacted laminates was measured and the reduction of the strength is found to be dependent upon the impact damage patterns. Furthermore, in this study, stress concentrations in the vicinity of the indents were determined from full-field stress distribution obtained by three-dimensional Digital Image Correlation (3D DIC) measurement. It was found that the stress concentration was associated with the reduction of the residual strength for the GFRP laminates.

A Study on Low Velocity Impact of Woven Glass/Phenolic Composite Laminates Considering Environmental Effects

2005 ◽  
Vol 297-300 ◽  
pp. 1303-1308 ◽  
Author(s):  
Jae Hoon Kim ◽  
Duck Hoi Kim ◽  
Hu Shik Kim ◽  
Byoung Jun Park
Keyword(s):  
Compressive Strength ◽  
Environmental Effects ◽  
Impact Loading ◽  
Composite Laminates ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Internal Damage ◽  
The Impact ◽  
Phenolic Composite

The objectives of this study are to evaluate the internal damage and compressive residual strength of composite laminate by impact loading. To investigate the environmental effects, as-received and accelerated-aged glass/phenolic laminates are used. UT C-Scan is used to determine the impact damage characteristics and CAI tests are carried out to evaluate quantitatively the reduction of compressive strength by impact loading. The damage modes of the woven glass/phenolic laminates are evaluated. In the case of the accelerated-aged laminates, as aging time increases, initial failure energy and residual compressive strength decrease.

Analysis on Low Velocity Impact Damage and Compressive Residual Strength of Composite Laminates

2014 ◽  
Vol 566 ◽  
pp. 463-467
Author(s):  
Pu Xue ◽  
H.H. Chen ◽  
W. Guo
Keyword(s):  
Experimental Data ◽  
Residual Strength ◽  
Composite Laminates ◽  
Damage Mechanics ◽  
Impact Damage ◽  
Numerical Results ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact

This paper studies the impact damage under low velocity impact for composite laminates based on a nonlinear progressive damage model. Damage evolution is described by the framework of the continuum damage mechanics. The real impact damage status of composite laminates has been used to analyze the residual compressive strength instead of assumptions on damage area after impact. The validity of the methodologies has been demonstrated by comparing the numerical results with the experimental data available in literature. The delamination area has an error of 11.3%. The errors of residual strength and compressive displacement are 8.9% and 15%, which indicate that the numerical results matched well with the experimental data.

scholarly journals 3D Progressive Failure Modeling of Drop-Weight Impact on Composite Laminates

2018 ◽  
Author(s):  
DC Pham
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Progressive Failure ◽  
Damage Model ◽  
Matrix Cracking ◽  
Structural Level ◽  
Velocity Impact ◽  
Drop Weight ◽  
Weight Impact ◽  
The Impact

Composite laminates are susceptible to out-of-plane impact loads due to the lack of reinforcement in the through-thickness direction. Unlike the localized damage induced by a high velocity impact where the incident energy is dissipated near a contact area, low velocity impact damage involves multiple failure mechanisms such as matrix cracking, fiber breakage, and widespread interface delaminations. Depending on the extent of damage, significant reduction in the load-bearing capability of the structure has been observed. The prediction of composite impact damage resistance by a reliable progressive damage analysis tool is essential to reduce intensive and expensive certification tests at structural level. In this work, an enhanced explicit 3D damage model is implemented via VUMAT in Abaqus to perform a drop-weight impact simulation of a [454/04/-454/904]s Hexply AS4/8552 composite laminate. The impact-induced damage and its extent are captured by a 3D Continuum Damage Model (CDM) coupled with an energy driven failure mechanism. The developed module provides a unified solution process for the impact response prediction followed by the residual strength prediction under compression within an explicit solver. Two examples are selected to demonstrate the capability of the progressive failure analysis under dynamic and static loading: 1) a drop-weight test; and 2) an open-hole tension test. Numerical predictions from the developed VUMAT are compared with the test data and predictions using the open source CompDam code developed by NASA.

scholarly journals Palliatives for Low Velocity Impact Damage in Composite Laminates

2017 ◽  
Vol 2017 ◽  
pp. 1-16 ◽  
Author(s):  
Mubarak Ali ◽  
S. C. Joshi ◽  
Mohamed Thariq Hameed Sultan
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Laminated Composites ◽  
Low Velocity Impact ◽  
Normal Operation ◽  
Fibre Reinforcement ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Initiation ◽  
The Impact

Fibre reinforced polymer laminated composites are susceptible to impact damage during manufacture, normal operation, maintenance, and/or other stages of their life cycle. Initiation and growth of such damage lead to dramatic loss in the structural integrity and strength of laminates. This damage is generally difficult to detect and repair. This makes it important to find a preventive solution. There has been abundance of research dealing with the impact damage evolution of composite laminates and methods to mitigate and alleviate the damage initiation and growth. This article presents a comprehensive review of different strategies dealing with development of new composite materials investigated by several research groups that can be used to mitigate the low velocity impact damage in laminated composites. Hybrid composites, composites with tough thermoplastic resins, modified matrices, surface modification of fibres, translaminar reinforcements, and interlaminar modifications such as interleaving, short fibre reinforcement, and particle based interlayer are discussed in this article. A critical evaluation of various techniques capable of enhancing impact performance of laminated composites and future directions in this research field are presented in this article.

Sign in / Sign up

Export Citation Format

Share Document