scholarly journals THEORETICAL SUBSTANTIATION OF THE USE OF BIOMETHANE IN GAS SUPPLY SYSTEMS

Author(s):  
D. Suslov

The work is devoted to the urgent problem of using an alternative energy source of biomethane for gas supply to settlements. The effective use of biomethane in gas supply systems requires scientific substantiation, considering the entire range of technological parameters and operating conditions. The methods of graphs and parametric optimization are used to minimize the total reduced costs to the gas supply system to carry out the research. Based on the analysis of gas consumption by the municipal districts of the Belgorod region, a graphical dependence is built and an expression is obtained to determine the annual gas consumption by the population on the population size. The calculation of the mass of organic waste and the density of substrate formation is made, on the basis of which the potential for biomethane production in the municipal districts of the Belgorod region is determined. It has been established that the potential volume of biomethane in the Belgorod region is 633194 thousand m3 / year, or 11% of the total gas consumption. A diagram of the location of biomethane plants and gas pipelines for supplying biomethane to gas networks has been built. The optimal values of the technological parameters of the biomethane gas supply system have been established: the operating range of the biomethane plant depending on the substrate formation density, the length of the gas network for biomethane supply, depending on the gas consumption density.

2019 ◽  
Vol 91 ◽  
pp. 07016
Author(s):  
Elena Solovyeva

This article analyzes the causes of accidents on overhead gas pipelines. Special attention is paid to the operating conditions of gas distribution and gas consumption systems. The main measures aimed at reducing the environmental danger of gas supply systems operation have been identified. The main methods of increasing the reliability of gas distribution systems in the design of gas networks are considered. The complex index of reliability of gas distribution systems is used, which allows choosing the optimal version of the gas supply system.


Vestnik MGSU ◽  
2021 ◽  
pp. 1388-1396
Author(s):  
Denis Yu. Suslov

Introduction. A promising direction in the development of gas supply systems, which is widely used in the developed countries of the world, is the use of an alternative energy source — biomethane. The effective use of biomethane requires the development of scientific provisions and recommendations for the use of biomethane gas supply systems, taking into account technical and economic factors. Therefore, it is urgent to develop an economic and mathematical model for choosing a gasification method and determining the area of rational use of gas supply systems with biomethane. Materials and methods. To develop an economic and mathematical model for choosing a method for gasification of settlements, methods of mathematical modeling and parametric optimization were used. The implementation of the economic and mathematical model was carried out in the Mathcad software package. Mathematical and graphic processing of the results obtained was carried out. Results. An economic and mathematical model was developed for determining the rational area of application of biome­thane for gas supply to settlements. The model is based on the technical and economic calculation of the reduced costs for gas supply systems with network natural gas and biomethane. Using the developed model, the technical parameters of the biomethane gas supply system were determined: the critical length of the gas pipeline branch, the radius of the biomethane plant, the biomethane consumption, the length of the gas pipeline for the biomethane supply, and the reduced costs to the gas supply system. A graph of the dependence of the critical length of the gas pipeline branch on the population size has been obtained, which makes it possible to determine the area of rational use of biomethane for gas supply to settlements. It was found that for a rural settlement with a population of 5,000 people, the critical length of the gas pipeline branch is 24.820–28.044 km, for an urban-type settlement with a population of 15,000 people, the length of the gas pipeline branch is 50.923–64.677 km, and for a city with a population of 30,000 people — 89.617–127.279 km. Conclusions. The results obtained can be used for the development and design of gas supply systems based on biomethane for the gasification of settlements remote from the main gas pipelines. The use of biomethane makes it possible to gasify settlements in developed agricultural regions and to increase the efficiency of the gas transportation system of the Russian Federation.


Author(s):  
D. R. Mоroz ◽  
N. V. Hruntovich

Investigation of the structure and the functional patterns of the regional gas supply systems is necessary for addressing a number of operational tasks, the main ones being the following: preparing requisitions for the planned volume of gas deliveries, project design for development and reconstruction of gas supply systems and gas storage facilities, developing of functional gas tariffs for different groups of customers. The regional gas supply system is considered from the standpoint of system analysis and presented as a complex dynamic system consisting of several subsystems. The balance structure of gas consumption in the region for the ten-year period and the patterns of daily gas consumption in the region depending on the average daily outdoor temperature for the two-year period have been studied. It is discovered that the power economy, industry and agriculture account for the largest share in the total gas consumption. The values of correlation coefficients between the outdoor air temperature and gas flow rate according to the elements of the balance structure are calculated. For the daily values of gas consumption for the needs of the population and housing-and-communal services, the highest correlation coefficient between the studied characteristics R is noted = (–0,98‒(–0,96)). Analysis of the matching fields of daily gas consumption in the region to the daily average temperature over a given one-year timeframe made it possible to identified two key areas, viz.: the area of operation of the heating system and the area of positive temperatures (the cheating system is off). For each of the areas, the dependences of the daily gas flow rate on the temperature and the effect of temperature changes on the gas consumption alteration were determined. It was found out that the temperature range from 0 to 10 °C corresponds to the zone of uncertain state of the regional gas supply system, since two areas overlap in this zone, viz.: the area of operation of the heating system and the area of positive temperatures.


2019 ◽  
Vol 6 (2) ◽  
pp. 56-63
Author(s):  
L. D. Pylypiv ◽  
І. І. Maslanych

There are investigated the influence of operating pressures in the gas supply system on the level of such energy indicators as efficiency, gas flow and gas overrun by gas equipment in residential buildings. There is established a relationship between the values of operating pressures in the gas supply system and the gas consumption level of household appliances. The causes of insufficient pressure in the gas networks of settlements are analyzed in the article. There is also developed an algorithm for calculating the change in the efficiency of gas appliances depending on the operational parameters of the gas network. It has been found that the most efficient operation of gas appliances is observed at an overpressure at the inlet of gas appliances of about 1200 Pa.To ensure the required quality of natural gas combustion among consumers and minimize gas consumption there are justified the following measures in the article: coordinating a domestic regulatory framework for assessing the quality of natural gas with international norms and standards; improving the preparation of gas coming from local wells before supplying it to gas distribution networks; auditing low pressure gas pipelines and reconstructing areas affected by corrosion; ensuring standard gas pressure in the network for the normal operation of domestic gas appliances; stating quality indicators of natural gas combustion by gas sales organizations.


2020 ◽  
Vol 219 ◽  
pp. 02001
Author(s):  
Nikolay Ilkevich ◽  
Tatyana Dzyubina ◽  
Zhanna Kalinina

This paper proposes taking into account new properties of gas supply systems in a mathematical model of flow distribution in comparison with the traditional formulation. The approach suggests introducing an arc coefficient, which allows for changes in the magnitude of gas flow passing along the arc, a vector of an increase in the arc throughput, and lower constraints on the gas flow along the arc. We also propose considering a new economic environment, namely, new criteria for optimizing the flow distribution and setting fictitious gas prices for consumers. These criteria enable us to take account of the priority gas supply to a definite group of consumers. As an example, the calculation of gas flows for the aggregated Unified Gas Supply System (UGSS) for 2030 is considered. This calculation takes into account the arc coefficients and the increase in the throughput of arcs.


2021 ◽  
Vol 258 ◽  
pp. 08015
Author(s):  
Anna Malysheva

The gas supply system is determined by the classes of the elements of the gas transmission network associated with the pressure of the pumped natural gas. Laying gas pipelines in urban areas requires sufficient space around the pipes as a safety zone. The gas pipelines of the first level include gas communications in which the methane pressure is high or medium. To eliminate dead-end sections, gas pipelines are backed up (duplicating individual segments or ringing). The creation of a dead-end network is allowed only in small settlements. Dead-end network is a gas pipeline branching in various directions to gas consumers. Each section of the branched network has a one-way power supply.


2021 ◽  
Vol 1 (161) ◽  
pp. 267-273
Author(s):  
Yu. Pakhomov ◽  
N. Shulga ◽  
L. Piddubna

The topical issues of development of automated control systems of gas control stations (GCS) and ways of reliable and economical functioning of the gas supply system in modern conditions have been considered in the article. The implementation of European innovative technologies, which are associated with using the modern equipment, telemetry tools to transmit the equipment operation parameters to the dispatcher control panel are the one of the ways to increase the safety and efficiency of GCS performance. The characteristic of the modern complex of telemetry, the raising of efficiency, reliability and safe operation of the gas supply systems due to the possibility of monitoring, technological control and management from the central dispatcher control room are given. The complex of telemetry helps to prevent emergency situations at facilities and to ensure control over unauthorized entry into the GCS premises by unauthorized persons. The article discusses the use of the automated system of operative-dispatching management (ASODM). It is a multi-level automated system that ensures the reliable functioning of the gas supply system at all levels of the hierarchy. It has been shown that the result of the creation of the ASODM are equipping of the control object with microprocessor control and management devices, the integration of various automation tools into a single information management system. It has been proven that the development of ASODM of GCS on the basis of local control and management modules using traditional approaches to creation of automation systems and using the cellular telephone communication as data transmission channels based on GSM-technologies are most rational. The digital control device, which is made on the technological platform of the programmable logic integrated circuit (PLIC), is the main element of the local control and management module. Digital control device (PLIC controller) is a relatively inexpensive and reliable equipment in an automated local GCS control system. The method of data transmission via GSM / GPRS wireless communication channel is considered. The use of GSM-modems and GPRS technology allows to remove restrictions on the distance of data transmission, as well as allows to fully automate the process of transmission and processing of information. The use of GSM / GPRS-technologies in the vehicles of the emergency dispatch service is also shown. The dispatcher can fully monitor the movement of the car with registration on the map of the city where the car is located.


Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 8001
Author(s):  
Mirosław Karczewski ◽  
Marcin Wieczorek

Problems such as global warming and rising oil prices are driving the implementation of ideas to reduce liquid fuel consumption and greenhouse gas emissions. One of them is the use of natural gas as an energy source. It is a hydrocarbon fuel with properties that allow the reduction of CO2 (Carbon Dioxide) emissions during combustion. Solutions are being implemented that allow for the use of natural gas to means of transport, namely in trucks of various categories and intended use. These installations are used in new vehicles, but also in the form of conversion for used cars, usually several years old. The article presents the results of tests of an engine from a used semi-trailer truck with a mileage of approx. 800 thousand km, with the compressed natural gas supply system installed. This installation (hardware and software), depending on the engine operating conditions, enables the replacement of up to 80% of diesel (base fuel) with natural gas. The impact of changing the fuel supply method on the traction characteristics calculated with the use of external characteristics of both conventional and dual-fuel mode was assessed. The emissions of exhaust gas components were also determined under the conditions of the UNECE Regulation No. 49. The test results confirm that compared to conventional fueling, dual fueling allows for a significant reduction in CO2 emissions, even in a used vehicle with high mileage. The use of a non-factory installation did not significantly affect the traction properties of the vehicle, and engine wear is of greater importance in this case (comparison with factory data). The work is a valuable supplement to the results of the research in which the impact of the use of a non-factory CNG (Compressed Natural Gas) supply system on the performance of a semi-trailer truck unit equipped with such an installation was assessed compared to a semi-trailer truck unit powered in a classic way with diesel fuel.


2021 ◽  
pp. 75-76
Author(s):  
Olga Akeksandrovna Gnezdilova ◽  
Valeriy Yurievich Kravchuk

Frequent cases of domestic gas explosions require a more detailed study of gas use in terms of ensuring the safety and maintenance of equipment when providing public services for gas supply. The study of the theory of gas consumption accounting in cases of establishing homogeneous phenomena occurring in gas supply systems is shown in the developed method of correlation and  regression analysis.


Sign in / Sign up

Export Citation Format

Share Document