scholarly journals Pemanfaatan Limbah Plastik Polyprophylene (PP) dan Sekam Padi Menjadi Papan Partikel

2018 ◽  
Vol 4 (2) ◽  
pp. 101
Author(s):  
Meldayanoor Meldayanoor ◽  
Arifin Arifin ◽  
Rusuminto Syahyuniar
Keyword(s):  
Physical Properties ◽  
Water Absorption ◽  
Particle Density ◽  
Raw Materials ◽  
Quality Standard ◽  
Raw Material ◽  
Particle Board ◽  
Rice Husks ◽  
Comparison Of The Results ◽  
The Right

ABSTRACT The need for board materials continues to increase, therefore the need for new innovations in the form of utilization of plastic waste and rice husks are used as raw material for making particle board where the waste plastic as adhesive and rice husk as filler. The purpose of this research is to know the physical properties such as density, moisture content, and water absorption in order to determine the exact formulation on the particle board that meets the quality standard. SNI 03-2015-2016 quality standard is used as a reference comparison of the results of testing stages of research starting from the processing of raw materials plastick and chaff into sebuk, mixing, and formation of particle board until the testing phase. Elements of particle board formation are rice husks and polyprophylene plastics as adhesives made with Plastic compositions: 40%: 60% 50%: 50% and 40%: 40%: husks. In testing the physical properties of the results showed that the right composition is 60%: 40% because it has results with a particle density of 0.83 g /cm3, a water content of 4.87%, and a water absorption of 10.67%. It is the best result of some predefined compositions and meets the quality standard of SNI 03-2015-2016   Keywords: From The board particles, polyprophylene plastic, chaff rice

scholarly journals SIFAT FISIS PAPAN SEMEN DARI LIMBAH KULIT BATANG SAGU

2017 ◽  
Vol 1 (3) ◽  
pp. 203
Author(s):  
Rohny S. Maail
Keyword(s):  
Physical Properties ◽  
Water Absorption ◽  
Water Content ◽  
Calcium Chloride ◽  
High Performance ◽  
Raw Materials ◽  
Particle Board ◽  
Cement Board

This research objectives were to investigate possibility of using the waste of sago cortex (Ela sagu/Wa’a) in the manufacture of cement board and to determine the physical properties of cement board based on the comparison in proportion of materials (cement, sago, water)  and catalyst calcium chloride (CaCl2). Method were applied used completely randomesed design with tree replications in 3x3x3, with total 27 samples of cement board. The results shown that the waste of sago cortex ca be applied as raw materials to manufacture of cement board and fulfill the standard of particle board (JIS A 5908, 2003). The board have dencity which is almost equal to the target of dencity, lower value in water content, water absorption and thichness swelling so that have good performance in quality and stability dimensions. The sago cortex in side of base and the catalyst CaCl2 in 6% gave high performance for all physical properties of cement board.

scholarly journals POTENSI KERTAS SEBAGAI BAHAN BAKU PAPER ROPES (POTENTIAL OF PAPER AS THE RAW MATERIAL FOR PAPER ROPES)

2017 ◽  
Vol 7 (02) ◽  
pp. 91
Author(s):  
Mungki Septian Romas ◽  
Ikhwan Pramuaji ◽  
Lies Indriati ◽  
Sonny Kurnia Wirawan
Keyword(s):  
Tensile Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Water Absorption ◽  
Water Resistance ◽  
Raw Materials ◽  
Raw Material ◽  
Paper Surface ◽  
Water Barrier ◽  
Reduced Water

One of the raw materials furniture common in Indonesia is rattan. Because of the availability of local rattan is very limited so that it is necessary to find alternative raw materials that can be used to substitute the rattan. Paper ropes made from spinning paper, is one of alternative that can be utilized. Paper ropes making from various spinning papers have been studied. Some types of paper were used in this experiment. The spinning papers were characterized and treated to modify its surface properties especially to increase their water resistance. Paper ropes making were done by using the twisting machine and then the physical properties of paper ropes resulted were tested. The results showed that paper surface treatment increased tensile strength, and reduced water absorption and porosity of treated papers. The use of water barrier chemicals and adhesive are effective in increasing water resistance of paper surface. Decreased water absorption and porosity are  20% - 43% and 30% - 98%, respectively. Based on this result, paper ropes is potential to become an alternative raw material for furniture.  ABSTRAKSalah satu bahan baku furnitur umum di Indonesia adalah rotan. Karena ketersediaan rotan lokal sangat terbatas sehingga diperlukan untuk mencari bahan baku alternatif yang dapat digunakan untuk menggantikan rotan. Paper ropes yang terbuat dari spinning paper, merupakan salah satu alternatif yang dapat dimanfaatkan. Pembuatan paper ropes dari berbagai jenis spinning paper telah dipelajari pada penelitian ini. Beberapa jenis kertas digunakan dalam percobaan ini. Spinning paper dikarakterisasi dan diperlakukan khusus untuk memodifikasi sifat permukaannya terutama untuk meningkatkan ketahanan airnya. Pembuatan paper ropes dilakukan dengan menggunakan mesin pemilin dan pengujian sifat fisik paper ropes telah dilakukan. Hasil penelitian menunjukkan bahwa perlakuan khusus permukaan kertas meningkatkan kekuatan tarik, dan mengurangi penyerapan air dan porositas. Penggunaan bahan kimia water barrier dan adhesif cukup efektif dalam meningkatkan ketahanan air permukaan kertas.  Penurunan penyerapan air dan porositas masing-masing sebesar 20% - 43% dan 30% - 98%. Berdasarkan hasil ini, paper ropes memiliki potensi sebagai bahan bahan baku alternatif untuk furnitur.

Use of Sugarcane Bagasse Ashes as Raw Material in the Replacement of Fluxes for Applications on Porcelain Tile

2016 ◽  
Vol 881 ◽  
pp. 383-386 ◽  
Author(s):  
Raimundo J.S. Paranhos ◽  
Wilson Acchar ◽  
Vamberto Monteiro Silva
Keyword(s):  
Mechanical Properties ◽  
Environmental Impact ◽  
Physical Properties ◽  
Sugarcane Bagasse ◽  
Sintering Temperature ◽  
Raw Materials ◽  
Raw Material ◽  
The Cost ◽  
Potential Use ◽  
Porcelain Tile

This study evaluated the potential use of Sugarcane Bagasse Ashes (SBA) as a flux, replacing phyllite for the production of enamelled porcelain tile. The raw materials of the standard mass components and the SBA residue were characterized by testing by XRF, XRD, AG, DTA and TGA. Test samples were fabricated, assembled in lots of 3 units and sintered at temperatures of 1150 ° C to 1210 ° C. The results of the physical properties, mechanical properties and SEM of the sintered samples, showed that the formulation, G4 - in which applied 10% of SBA replacing phyllite, sintering temperature 1210 ° C showed better performance as the previously mentioned properties due to the formation of mullite crystals, meeting the prerequisites of standards for enamelled porcelain tile, while reducing the environmental impact and the cost of production.

scholarly journals KARAKTERISTIK AMPLANG IKAN LELE DUMBO (Clarias gariepinus) HASIL VARIASI RASIO DAGING IKAN LELE DAN TAPIOKA

2020 ◽  
Vol 14 (02) ◽  
pp. 143
Author(s):  
Priyanto Priyanto ◽  
Yuli Wibowo ◽  
Jay Jayus
Keyword(s):  
Raw Materials ◽  
Clarias Gariepinus ◽  
Raw Material ◽  
Chi Square ◽  
Organoleptic Test ◽  
Fish Flesh ◽  
Randomized Design ◽  
Protein Properties ◽  
Tapioca Flour ◽  
The Right

The demand for amplang crackers is now increasing. However, the price of its raw material, mackerel fish, is generally higher compare to other fishes, causing the higher cost of this type crackers production. Effort to explore other fish as an alternative raw material is required to overcome the problems. Catfish is one of the choices to be used as raw material since this fish is more available in a market in a lower price, but the protein properties of this fish is different to mackarel, which will be possible to affect the nature of the crackers obtained. To produce catfish amplang crackers to be similar to common amplang product, it is necessary to find out the right composition of catfish and tapioca flour used. Therefore, the purpose of this research was to characterize physico-chemically and organoleptically, the catfish amplang crackers made under different ratio of fish flesh and starch. The experiment was designed using completely randomized design. Physico-chemical data obtained were analyzed using ANOVA, while the organoleptic test data were examined using chi-square method. The effectiveness test was carried out to find the proper ratio of raw materials composition used. The results showed that the higher the ratio of the fish flesh and the starch composition, the lower the texture value of the crackers as an indication of the decrease of its crispness. Although the lightness of the crackers was lowered by the addition of more starch to the dough, its linear expansion and hygroscopicity were not affected. The results of organoleptic test showed that the panelist was prefer to a higher crispness of crackers. The most preferable cracker was the one with 1:2.25 ratio of catfish flesh and starch, showing the characteristic of 1.80% moisture, 2.08% ash, 5.75% protein, 23.55% fat, and 66,93% carbohydrate. Keywords: cracker, catfish, tapioca starch

scholarly journals Geochemical And Mineralogical Assessment Of Secondary Gypsum In Al-Najaf, Iraq And Employment As Raw Material For Cement Industry

2021 ◽  
Vol 72 ◽  
pp. 215-222
Author(s):  
Mohanad R.A. Al-Owaidi ◽  
◽  
Mohammed L. Hussein ◽  
Ruaa Issa Muslim ◽  
◽  
...  
Keyword(s):  
Portland Cement ◽  
Raw Materials ◽  
Chemical Properties ◽  
Quality Standard ◽  
Cement Industry ◽  
Raw Material ◽  
Insoluble Residue ◽  
Mineralogical Study ◽  
The Mean ◽  
Industry Success

The Portland cement industry is one of the strategic industries in any country. The basis of an industry success is the availability of raw materials and, the low extraction in addition to transportation costs. The Bahr Al-Najaf region is abundant with limestone rocks but lacks primary gypsum. An investigation had been carried out to identify the source of secondary gypsum as an alternative to primary gypsum. Twelve boreholes were drilled for a depth of 2 m, as the thickness of suitable secondary gypsum layer ranges from 1 to 1.5 m. The mineralogical study revealed the predominance of gypsum followed by quartz and calcite, with an average of 62.9%, 19.6% and 14.35%, respectively. The geochemical analysis revealed that the content of SO3 is appropriate and ranging from 41.92% to 32.89% with an average of 37.73%. The SO3 content is within an acceptable range. The mean abundance of the major oxides of the study area may be arranged as SO3 > CaO> SiO2> MgO> Al2O> Fe2O3. The insoluble residue was at an acceptable rate. The laboratory experiments for milling secondary gypsum with clinker has successfully proven the production of Portland cement that matches the limits of the Iraqi Quality Standard (IQS) No. 5 of 1984. Great care must be taken when using secondary gypsum; secondary gypsum must be mixed well to maintain the chemical properties before blending with clinker and utilizing in the cement mill in the cement plant.

scholarly journals KUALITAS PAPAN PARTIKEL BERDASARKAN KOMPOSISI SEKAM PADI DAN KAYU SENGON DENGAN VARIASI KADAR PEREKAT

2019 ◽  
Vol 7 (2) ◽  
Author(s):  
Dendi Prayoga ◽  
. Dirhamsyah ◽  
. Nurhaida
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Rice Husk ◽  
Raw Materials ◽  
Urea Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Solid Content ◽  
Particle Board ◽  
Rice Husks ◽  
Wood Processing

This research aimed to examine the physical and mechanical properties of particle boards based on the composition of raw materials and adhesive content and know the treatment of the composition of raw materials and the best adhesive content and meet the standard JIS A 5908-2003. The research was conducted at Wood Workshop Laboratory, Wood Processing Laboratory Faculty of Forestry,Tanjungpura University and Laboratory of PT. Duta Pertiwi Nusantara Pontianak. The adhesive used is Urea Formaldehyde with 52% Solid Content. Comparison of the composition of rice husks and sengon varies namely rice husk 50%: sengon 50%, rice husk 60%: sengon 40% and rice husk 70%: sengon 30%  and variations in the levels of UF adhesives, namely 14% and 16%, with target density 0,7 gr/cm3. The particleboard was 30 cm x 30 cm x 1 cm Pressing at temperature 140oC for 8 minutes, with  pressure of 25 kg/cm2. The research results of the study of density and moisture content meet the standards JIS A 5908-2003. The best particle values of rice husk and sengon  with composition a ratio of  rice husk 50%: sengon 50% , 16% adhesive content  16%, with density value of  0,7072 gr/cm3, moisture content 9,1949 %, thick development 12,3210 %, water absorption 68,8270 %, MOE 12110,7273 kg/cm2, MOR 161,0025 kg/cm2, firmness sticky 1,9320 kg/cm2, screw holding strength 62,3124 kg.Keywords : adhesive, composition, particle board, rice husk, sengon

scholarly journals Ketahanan Papan Partikel Terhadap Suhu Tinggi, Serapan Air dan Perilaku Patah

2019 ◽  
Vol 2 (3) ◽  
pp. 230
Author(s):  
Dian Sestining Ayu ◽  
Edi Kurniadi
Keyword(s):  
Physical Properties ◽  
Water Absorption ◽  
Particle Density ◽  
Flexural Modulus ◽  
Wood Powder ◽  
Wood Floor ◽  
Structural Purpose ◽  
Density Values ◽  
Shell Particles ◽  
Coconut Shells

Wood is widely used for structural and non-structural purposes. In non-structural purpose, wood is used, among others, as furniture, parquet (wood floor), partitions and so on. In line with the decreasing availability of wood, the price of wood is becoming increasingly expensive. In certain uses, substitute materials such as particle boards have been started to use. Particle boards are generally composed of certain wood powder wastes. This study aimed to look for alternative materials for building particle boards from coconut shells. The particle boards to be tested were composed of coconut shells with the addition of certain wood powder which is added with certain percentage. Particle boards were printed with a certain size, given certain pressure and tested for their physical properties. The physical properties of the particle boards tested included particle density, water absorption, dry flexural modulus, and dry bending fracture modulus. The results showed that the best mixture composition capable of producing density values, water absorption, fracture modulus and optimum modulus of elasticity were found in the proportion of mixtures of 70-90% coconut shell particles and 30-10% wood particles.

Ceramics

1998 ◽  
Author(s):  
Norman Herz ◽  
Ervan G. Garrison
Keyword(s):  
Physical Properties ◽  
Raw Materials ◽  
General Term ◽  
Raw Material ◽  
Petrographic Analysis ◽  
Ceramic Product ◽  
Primary Interest ◽  
Archaeological Ceramics ◽  
Ethnographic Studies ◽  
Insight Into

Archaeological ceramics refers to products made primarily of clay and containing variable amounts of lithic and other materials as well. The term ceramic is derived from the Greek keramos, which has been translated as "earthenware" or "burned stuff." Ceramics include products that have been fired, primarily pottery but also brick, tile, glass, plaster, and cement as well. Since pottery is by far the most important archaeologically, and the methods of sampling and study are largely applicable to the others, this chapter is devoted primarily to pottery. Pottery then is the general term used here for artifacts made entirely or largely of clay and hardened by heat. Today, a distinction is sometimes made between pottery, applied to lower-quality ceramic wares, and the higher-grade product porcelain. No such distinction will be made here, so the term pottery alone will be used. Raw material that goes into the making of a pot includes primarily clay, but also varying amounts of temper, which is added to make the material more manageable and to help preserve the worked shape of the pot during firing. Of primary interest in ceramic studies are 1. the nature and the source of the raw materials—clays, temper, and slip (applied surface pigment)—and a reconstruction of the working methods of ancient potters; 2. the physical properties of the raw materials, from their preparation as a clay-temper body through their transformations during manufacture into a final ceramic product; 3. the nature of the chemical and mineral reactions that take place during firing as a clue to the technology available to the potter; and 4. the uses, provenance, and trade of the wares produced. Much of the information needed to answer these questions is available through standard geochemical and petrographic analysis of ceramic artifacts. Insight into the working methods of ancient potters also has been obtained through ethnographic studies of cultures where, because of isolation or conservative traditions or both, ancient methods have been preserved.

scholarly journals Synthesis and Biological Application of Polylactic Acid

Molecules ◽  
2020 ◽  
Vol 25 (21) ◽  
pp. 5023
Author(s):  
Ge Li ◽  
Menghui Zhao ◽  
Fei Xu ◽  
Bo Yang ◽  
Xiangyu Li ◽  
...  
Keyword(s):  
Physical Properties ◽  
Polylactic Acid ◽  
Biomedical Applications ◽  
Raw Materials ◽  
Raw Material ◽  
Biomedical Materials ◽  
Biomedical Material ◽  
Sugar Fermentation ◽  
Low Toxicity ◽  
Good Biocompatibility

Over the past few decades, with the development of science and technology, the field of biomedicine has rapidly developed, especially with respect to biomedical materials. Low toxicity and good biocompatibility have always been key targets in the development and application of biomedical materials. As a degradable and environmentally friendly polymer, polylactic acid, also known as polylactide, is favored by researchers and has been used as a commercial material in various studies. Lactic acid, as a synthetic raw material of polylactic acid, can only be obtained by sugar fermentation. Good biocompatibility and biodegradability have led it to be approved by the U.S. Food and Drug Administration (FDA) as a biomedical material. Polylactic acid has good physical properties, and its modification can optimize its properties to a certain extent. Polylactic acid blocks and blends play significant roles in drug delivery, implants, and tissue engineering to great effect. This article describes the synthesis of polylactic acid (PLA) and its raw materials, physical properties, degradation, modification, and applications in the field of biomedicine. It aims to contribute to the important knowledge and development of PLA in biomedical applications.

scholarly journals Turonian flint economy in the easternmost Magdalenian: new data from Stare Baraki, site 1 (eastern Poland)

2020 ◽  
Vol 12 (12) ◽  
Author(s):  
Tadeusz Wiśniewski ◽  
Maciej T. Krajcarz ◽  
Karol Standzikowski
Keyword(s):  
Raw Materials ◽  
Included Study ◽  
Raw Material ◽  
The West ◽  
Eastern Area ◽  
Vistula River ◽  
Archaeological Materials ◽  
Lithic Raw Materials ◽  
The Right ◽  
Almost All

AbstractMagdalenian communities exploited mostly local and regional good-quality lithic raw materials. In south-eastern Poland, being the easternmost fringe of the Magdalenian range, Turonian grey flint had a particular importance. Outcrops of this raw material occur both at the west and at the east sides the Vistula River Gorge. The varieties from the eastern area (called here “eastern Turonian flint” or ETF) are common among inventories of the Magdalenian sites situated to west of the Vistula river. This fact points toward the frequent penetration of the ETF outcrop area by those societies. However, no Magdalenian sites were known directly from the ETF deposit area, and this gap in knowledge restricted further understanding of the character and diversity of Magdalenian activity there. Therefore, in this paper, we present the results of searching for Magdalenian sites within the ETF outcrop zone. Applied methodology included study of the archive archaeological materials, followed by detail survey and excavation of the selected site—Stare Baraki 1. This site documents a short stay or multiple stays of Magdalenian people, who were focused on Turonian flint knapping. Lithic inventory records collecting of several local flint varieties at the distance up to around 20 km from the site, followed by almost all stages of flint working. The material from Stare Baraki is the first known and currently the only trace of the Magdalenian people inside the zone of Turonian flint deposits on the right bank of the Vistula river. The study in Stare Baraki delivered new data for the reconstruction of territory exploitation strategies used in the easternmost Magdalenian.

Sign in / Sign up

Export Citation Format

Share Document