scholarly journals Rancangan Alat Potong Tahu Tradisional untuk Indutri Rumahan di Kabupaten Nagan Raya

2020 ◽  
Vol 6 (1) ◽  
pp. 20
Author(s):  
Herdi Susanto ◽  
Jepri Yanto ◽  
Wahyudin Wahyudin
Keyword(s):  
Small Businesses ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Production Capacity ◽  
Production Costs ◽  
Industry Analysis ◽  
Daily Production ◽  
Tool Performance ◽  
Aceh Province ◽  
Main Frame

Tofu processing by small businesses and small-medium industries in the Nagan Raya district of Aceh province still uses traditional methods, resulting in minimal daily production results, one of the obstacles in the field was found that the lack of tofu production results caused by working tools for cutting tofu still using knives one-eyed (kitchen knife), from the above, in this study, a number of model tools to cut tofu were adapted to suit the needs of the home industry, the stages of research in the study of literature, observation of tofu processing in the home industry, design of three models of tool design and analysis perunit costs and time efficiency assumptions about the performance of the tofu cutting device. Design using software produces three models of tofu cutting tools namely, models I and II with main frame stainless P = 100 cm, L = 100 and T = 5 cm, and model III stainless main frame P = 100 cm, L = 8 cm and T = 5 cm ,. Assumption of tool performance from the three design models with consideration of production costs and cutting speed, then from the results of literature studies and observations of the tofu making process traditionally selected model III which is more in line with the conditions of home industry workers in Nagan Raya district, with the specifications of the Long stainless main frame 100 cm Width 1 cm and Height 5 cm, tofu production capacity with two pieces of 256 pieces and a cutting speed of 150 seconds. Keywords— tofu cutting tools, home industry, analysis perunit costs, cutting speed

Life Prediction of Cutting Tool by the Workpiece Cutting Condition

2011 ◽  
Vol 223 ◽  
pp. 554-563 ◽  
Author(s):  
Noemia Gomes de Mattos de Mesquita ◽  
José Eduardo Ferreira de Oliveira ◽  
Arimatea Quaresma Ferraz
Keyword(s):  
Cutting Tool ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Operating Conditions ◽  
Production Costs ◽  
Depth Of Cut ◽  
Cutting Condition ◽  
Workpiece Material ◽  
The Cost

Stops to exchange cutting tool, to set up again the tool in a turning operation with CNC or to measure the workpiece dimensions have direct influence on production. The premature removal of the cutting tool results in high cost of machining, since the parcel relating to the cost of the cutting tool increases. On the other hand the late exchange of cutting tool also increases the cost of production because getting parts out of the preset tolerances may require rework for its use, when it does not cause bigger problems such as breaking of cutting tools or the loss of the part. Therefore, the right time to exchange the tool should be well defined when wanted to minimize production costs. When the flank wear is the limiting tool life, the time predetermination that a cutting tool must be used for the machining occurs within the limits of tolerance can be done without difficulty. This paper aims to show how the life of the cutting tool can be calculated taking into account the cutting parameters (cutting speed, feed and depth of cut), workpiece material, power of the machine, the dimensional tolerance of the part, the finishing surface, the geometry of the cutting tool and operating conditions of the machine tool, once known the parameters of Taylor algebraic structure. These parameters were raised for the ABNT 1038 steel machined with cutting tools of hard metal.

Evaluation of the Performance of CBN Tools When Turning Austempered Ductile Iron Material

2008 ◽  
Vol 130 (5) ◽  
Author(s):  
K. Aslantas ◽  
İ. Ucun ◽  
K. Gök
Keyword(s):  
Surface Roughness ◽  
Ductile Iron ◽  
Cubic Boron Nitride ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Salt Bath ◽  
Austempered Ductile Iron ◽  
Depth Of Cut ◽  
Tool Performance ◽  
Austempering Temperature

The study deals with the machinability properties of austempered ductile iron using cubic boron nitride cutting tools. To emphasize the role of the austempering process, ductile iron specimens were first austenitized in salt bath at 900°C for 60min, after which they were quenched in a salt bath at 250°C and 325°C for 60min. Machining tests were carried out at various cutting speeds under the constant depth of cut and the feed rate. Tool performance was evaluated based on the workpiece surface roughness and flank wear. The influence of the austempering temperature and cutting speed on the chip form was also studied. The results point out that the lower austempering temperature results in the increase in the cutting forces, while better surface roughness is attained.

Micro Quantity Internal Cooling (MQUIC™) of Cutting Tools for Increased Productivity While Machining Ti-6Al-4V

2010 ◽  
Author(s):  
Samved Bhatnagar ◽  
William J. Endres
Keyword(s):  
Tool Life ◽  
Unit Cost ◽  
Cutting Tools ◽  
Cutting Speed ◽  
High Strength ◽  
Internal Cooling ◽  
Wear Rates ◽  
Industry Standard ◽  
Tool Performance ◽  
Cutting Speeds

Machining of space age materials like Ti-6Al-4V is associated with thermally activated wear mechanisms which lead to rapid tool failure and increased machine downtime. The high strength and low thermal conductivity of Ti-6Al-4V can reduce tool-life significantly at high cutting speeds adding drastically to the per-unit cost. A new concept, Micro Quantity Internal Cooling (MQUIC™) has been developed to extend the tool-life and/or enable higher cutting speeds while machining Ti-6Al-4V. The concept involves introducing flow (coolant) in a micro-duct placed inside the tool and close to the cutting edge, thus bringing the cooling source close to the heat source (chip-contact area). In this research, experiments have been conducted to compare the performance (wear rates) of cutting tools using the MQUIC™ concept with those run under dry or flood conditions. Further, two levels of feed and cutting speed are selected for the experiments so as to be able to investigate the combined effect of parameters on tool performance. Physical testing employing coolant consumption of less than 5% of typical flood coolant rates proves the viability of the concept by demonstrating wear rates of 1/3 to 1/2 those of flood cooling. The testing also proves the application of the MQUIC™ concept to enable higher cutting speeds than the current industry standard for machining Ti-6Al-4V. This paper presents the experimental setup, methodology and results obtained while testing the feasibility of the concept.

Experimental and Numerical Investigation into Residual Stress During Turning Operation for Stainless Steel AISI 316

2020 ◽  
Vol 38 (12A) ◽  
pp. 1862-1870
Author(s):  
Safa M. Lafta ◽  
Maan A. Tawfiq
Keyword(s):  
Stainless Steel ◽  
Residual Stresses ◽  
Orthogonal Cutting ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Percentage Error ◽  
Depth Of Cut ◽  
Main Role ◽  
Turning Operation ◽  
Aisi 316

RS (residual stresses) represent the main role in the performance of structures and machined parts. The main objective of this paper is to investigate the effect of feed rate with constant cutting speed and depth of cut on residual stresses in orthogonal cutting, using Tungsten carbide cutting tools when machining AISI 316 in turning operation. AISI 316 stainless steel was selected in experiments since it is used in many important industries such as chemical, petrochemical industries, power generation, electrical engineering, food and beverage industry. Four feed rates were selected (0.228, 0.16, 0.08 and 0.065) mm/rev when cutting speed is constant 71 mm/min and depth of cutting 2 mm. The experimental results of residual stresses were (-15.75, 12.84, 64.9, 37.74) MPa and the numerical results of residual stresses were (-15, 12, 59, and 37) MPa. The best value of residual stresses is (-15.75 and -15) MPa when it is in a compressive way. The results showed that the percentage error between numerical by using (ABAQUS/ CAE ver. 2017) and experimental work measured by X-ray diffraction is range (2-15) %.

Sustainable approach towards the new EU-Sugar Market era

2016 ◽  
pp. 151-155 ◽  
Author(s):  
Arend Wittenberg ◽  
Menno Roukema ◽  
Jan L.M. Struijs ◽  
Olaf van Baal
Keyword(s):  
Production Capacity ◽  
Scaling Up ◽  
Production Costs ◽  
Production Chain ◽  
Northwest Europe ◽  
Market Situation ◽  
Sugar Market ◽  
Strong Market Position ◽  
Growth Scaling ◽  
The Given

Suiker Unie focuses on a strong market position in Northwest Europe at the lowest possible production costs for sugar. The company tries to achieve this by giving attention to the entire production chain. An important pillar of this mission is sustainability. During the recent years Suiker Unie developed a Masterplan to prepare its factories for the new market situation after 2017. In line with Cosun’s strategy of profitable growth, scaling up production capacity of beet factories was defined as goal of this Masterplan. The ambition of reduction of production costs and sustainability (e.g. carbon-footprint) was translated into the challenging constraint to increase the capacity growth within the given steam supply and the actual odour and noise emissions. Based on a thorough bottleneck study a portfolio of measures for each factory is defined, grouped into debottlenecking, energy saving, optimization and environmental projects.

Effects of Cooling Conditions on Thermal Crack Initiation of Brittle Cutting Tools during Intermittent Cutting

2015 ◽  
Vol 656-657 ◽  
pp. 237-242
Author(s):  
Kenji Yamaguchi ◽  
Tsuyoshi Fujita ◽  
Yasuo Kondo ◽  
Satoshi Sakamoto ◽  
Mitsugu Yamaguchi ◽  
...  
Keyword(s):  
Crack Initiation ◽  
Thermal Shock ◽  
High Speed ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Cutting Condition ◽  
Thermal Crack ◽  
Cooling Conditions ◽  
Cutting Operation ◽  
Intermittent Cutting

It is well known that a series of cracks running perpendicular to the cutting edge are sometimes formed on the rake face of brittle cutting tools during intermittent cutting. The cutting tool is exposed to elevated temperatures during the periods of cutting and is cooled quickly during noncutting times. It has been suggested that repeated thermal shocks to the tool during intermittent cutting generate thermal fatigue and result in the observed thermal cracks. Recently, a high speed machining technique has attracted attention. The tool temperature during the period of cutting corresponds to the cutting speed. In addition, the cooling and lubricating conditions affect the tool temperature during noncutting times. The thermal shock applied to the tool increases with increasing cutting speed and cooling conditions. Therefore, to achieve high-speed cutting, the evaluation of the thermal shock and thermal crack resistance of the cutting tool is important. In this study, as a basis for improving the thermal shock resistance of brittle cutting tools during high-speed intermittent cutting from the viewpoint of cutting conditions, we focused on the cooling conditions of the cutting operation. An experimental study was conducted to examine the effects of noncutting time on thermal crack initiation. Thermal crack initiation was found to be restrained by reducing the noncutting time. In the turning experiments, when the noncutting time was less than 10 ms, thermal crack initiation was remarkably decreased even for a cutting speed of 500 m/min. In the milling operation, the number of cutting cycles before thermal crack initiation decreased with increasing cutting speed under conditions where the cutting speed was less than 500 m/min. However, when the cutting speed was greater than 600 m/min, thermal crack initiation was restrained. We applied the minimal quantity lubrication (MQL) coolant supply to the intermittent cutting operation. The experimental results showed that the MQL diminished tool wear compared with that under the dry cutting condition and inhibited thermal crack initiation compared with that under the wet cutting condition.

scholarly journals Feasibility of Cobalt-Free Nanostructured WC Cutting Inserts for Machining of a TiC/Fe Composite

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3432
Author(s):  
Edwin Gevorkyan ◽  
Mirosław Rucki ◽  
Tadeusz Sałaciński ◽  
Zbigniew Siemiątkowski ◽  
Volodymyr Nerubatskyi ◽  
...  
Keyword(s):  
Cubic Boron Nitride ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Machined Surface ◽  
Powder Consolidation ◽  
Plasma Sintering ◽  
Cutting Inserts ◽  
Spark Plasma ◽  
And Performance ◽  
Nanostructured Tungsten Carbide

The paper presents results of investigations on the binderless nanostructured tungsten carbide (WC) cutting tools fabrication and performance. The scientific novelty includes the description of some regularities of the powder consolidation under electric current and the subsequent possibility to utilize them for practical use in the fabrication of cutting tools. The sintering process of WC nanopowder was performed with the electroconsolidation method, which is a modification of spark plasma sintering (SPS). Its advantages include low temperatures and short sintering time which allows retaining nanosize grains of ca. 70 nm, close to the original particle size of the starting powder. In respect to the application of the cutting tools, pure WC nanostructure resulted in a smaller cutting edge radius providing a higher quality of TiC/Fe machined surface. In the range of cutting speeds, vc = 15–40 m/min the durability of the inserts was 75% of that achieved by cubic boron nitride ones, and more than two times better than that of WC-Co cutting tools. In additional tests of machining 13CrMo4 material at an elevated cutting speed of vc = 100 m/min, binderless nWC inserts worked almost three times longer than WC-Co composites.

Effects of deep cryogenic treatment on machinability, hardness and microstructure in dry turning process of tempered steels

2020 ◽  
pp. 095440892097944
Author(s):  
Menderes Kam
Keyword(s):  
Cryogenic Treatment ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Point Of View ◽  
Turning Process ◽  
Deep Cryogenic Treatment ◽  
Dry Turning ◽  
Control Factors ◽  
Heat Treated ◽  
Hardness Values

This study investigated the effects of Deep Cryogenic Treatment (DCT) on machinability, hardness, and microstructure in dry turning process of AISI 4140 (48-51 HRc) tempered steels with ceramic cutting tools on the surface roughness (Ra). DCT process of steels has shown significant improvement in their mechanical properties. In this context, experiments were made with Taguchi L16 method and optimum values were determined. Three different values for each control factors as: different heat treated samples, cutting speeds (160, 200, 240, 280 m/min), feed rates (0.08, 0.12, 0.16, 0.20 mm/rev) were selected. As a result, the lowest Ra value was found to be 0.159 µm for the DCTT36 sample at a cutting speed of 240 m/min, a feed rate of 0.08 mm/rev. The optimum Ra value was the lowest for the DCTT36 sample compared to the other samples as 0.206 µm. The hardness values of the micro and macro were highest for the DCTT36 sample. Microstructural point of view Scanning Electron Microscopy (SEM) point of view, the DCCT36 sample showed that best results owing to its homogeneity. It was concluded that lower Ra values can be obtained with ceramic cutting tool in dry turning experiments according to the studies in the literature review. It is thought to be preferred as an alternative to cylindrical grinding process due to lower cost.

scholarly journals Investigation on the Surface Quality Obtained during Trochoidal Milling of 6082 Aluminum Alloy

Machines ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 75
Author(s):  
Nikolaos E. Karkalos ◽  
Panagiotis Karmiris-Obratański ◽  
Szymon Kurpiel ◽  
Krzysztof Zagórski ◽  
Angelos P. Markopoulos
Keyword(s):  
Surface Roughness ◽  
Surface Quality ◽  
Process Parameters ◽  
Manufacturing Industry ◽  
High Surface ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
High Surface Quality ◽  
Trochoidal Milling

Surface quality has always been an important goal in the manufacturing industry, as it is not only related to the achievement of appropriate geometrical tolerances but also plays an important role in the tribological behavior of the surface as well as its resistance to fatigue and corrosion. Usually, in order to achieve sufficiently high surface quality, process parameters, such as cutting speed and feed, are regulated or special types of cutting tools are used. In the present work, an alternative strategy for slot milling is adopted, namely, trochoidal milling, which employs a more complex trajectory for the cutting tool. Two series of experiments were initially conducted with traditional and trochoidal milling under various feed and cutting speed values in order to evaluate the capabilities of trochoidal milling. The findings showed a clear difference between the two milling strategies, and it was shown that the trochoidal milling strategy is able to provide superior surface quality when the appropriate process parameters are also chosen. Finally, the effect of the depth of cut, coolant and trochoidal stepover on surface roughness during trochoidal milling was also investigated, and it was found that lower depths of cut, the use of coolant and low values of trochoidal stepover can lead to a considerable decrease in surface roughness.

Cutting Performance and Wear Mechanism of Si3N4-Based Nanocomposite Ceramic Tool

2010 ◽  
Vol 443 ◽  
pp. 324-329 ◽  
Author(s):  
Bin Zou ◽  
Chuan Zhen Huang ◽  
Han Lian Liu ◽  
Jin Peng Song
Keyword(s):  
Wear Resistance ◽  
Wear Mechanism ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Cutting Performance ◽  
Nano Particles ◽  
Ceramic Tool ◽  
Tool Materials ◽  
High Cutting Speed ◽  
The Matrix

Si3N4/TiN nanocomposite tool and Si3N4/Ti(C7N3) nanocomposite tool were prepared. The cutting performance and wear mechanism of Si3N4-based nanocomposite ceramic tool was investigated by comparison with a commercial sialon ceramic tool in machining of 45 steel. Si3N4-based nanocomposite ceramic tool exhibits the better wear resistance than sialon at the relatively high cutting speed. The increased cutting performance of Si3N4-based nanocomposite ceramic tool is ascribed to the higher mechanical properties. Nano-particles can refine the matrix grains and improve the bonding strength among the matrix grains of Si3N4-based nanocomposite ceramic tool materials. It contributes to an improved wear resistance of the cutting tools during machining.

Sign in / Sign up

Export Citation Format

Share Document