scholarly journals The Hormonal Seed Priming in Relation to Carrot Germination

2020 ◽  
Vol 1 (6) ◽  
pp. 1-5
Author(s):  
Filza Ghafoor ◽  
Sana Liaqat ◽  
Waseem Iqbal

Seed priming is a pre-sowing treatment used to reduce stress effects in crops .This technique has been used to increase the germination rate of seeds mainly under unfavorable environmental condition. Crop productivity faces many problems like that unavailability of suitable condition that causes unbalanced seedling growth and poor germination. Hormones are essential to improve plant growth, development, crop yield quality and quantity. Auxin is essential hormones that improves germination of seeds and reduce stress effects. Laboratory experiment was conducted to study the effect of seed priming using different concentrations of IAA and IBA on carrot seeds (Daucus carota). In laboratory experiment, three concentrations of IAA and IBA (75 ppm, 50ppm, 25ppm) treated with distilled water with priming duration of 24 hours. Experiment was laid out in CRD with three replications. Data was collected to investigate the effect of seed priming with IAA and IBA under these condition like that (fresh weight, dry weight, speed of germination, root length, seed length, seedling length, final germination rate, mean germination time and dry matter content). Maximum fresh weight, final germination percentage, seedling length, energy of germination, speed of germination and mean germination rate was recorded IBA 75ppm. Maximum dry weight and dry matter content was observed IBA 25ppm.Maximum shoot length was recorded IBA 50ppm. Non-significant difference was recorded in root length.

2012 ◽  
Vol 137 (2) ◽  
pp. 71-79 ◽  
Author(s):  
A. Maaike Wubs ◽  
Yun T. Ma ◽  
Ep Heuvelink ◽  
Lia Hemerik ◽  
Leo F.M. Marcelis

Quantifying fruit growth can be desirable for several purposes (e.g., prediction of fruit yield and size, or for the use in crop simulation models). The goal of this article was to determine the best sigmoid function to describe fruit growth of pepper (Capsicum annuum) from nondestructive fruit growth measurements. The Richards, Gompertz, logistic, and beta growth functions were tested. Fruit growth of sweet pepper was measured nondestructively in an experiment with three different average daily temperatures (18, 21, and 24 °C) and in an experiment with six cultivars with different fruit sizes (20 to 205 g fresh weight). Measurements of fruit length and fruit diameter or circumference were performed twice per week. From these, fruit volume was estimated. A linear relationship related fruit fresh weight to estimated fruit volume, and a Ricker or polynomial function related fruit dry matter content to fruit age. These relations were used to convert estimated fruit volume into fruit fresh and dry weights. As dry weight increased until harvest, fitting the sigmoid function to the dry weight data was less suitable: it would create uncertainty in the estimated asymptote. Therefore, the sigmoid functions were fitted to fresh weight growth of the fruit. The Richards function was the best function in each data set, closely followed by the Gompertz function. The fruit dry weight growth is obtained by multiplication of the sigmoid function and the function relating fruit dry matter content to fruit age.


2021 ◽  
Vol 8 (2) ◽  
pp. 30-35
Author(s):  
Akpan A U ◽  
Orji K O ◽  
Uhala S C

A research on growth and yield components of some turmeric varieties (Curcuma longa L.) as affected by inorganic fertilizer levels in Umudike, South Eastern Nigeria was carried out at the teaching and research farm of the University, during 2018/2019 cropping seasons. It was laid out in a split plot design with three replications. Results, showed that plant height and number of tillers for both varieties and fertilizers levels increased at 2, 4, and 6 months after planting (MAP) during 2018 and 2019 cropping seasons. Variety 021 and 400 NPK (15:15:15) Kg-1 produced tallest plants and highest number of tillers over other varieties and fertilizer levels. Crop growth rate was positive at 2 – 4 MAP and negative at 4 – 6 MAP, with 021 and 400 NPK (15:15:15) kgha-1 producing higher growth rate. Heaviest rhizomes fresh weight (kg plot-1) of 3.74 and 3.75, rhizome dry matter content of 14.49 and 16.8%, rhizome dry weight of 23.57 and 23.90g and harvest index of 2.60 and 2.70% was yielded by UMT 021 variety over other varieties. The level of 400 NPK (15:15:15) kg ha-1 produced heaviest rhizome fresh weight of 4.47 and 4.57 kg plot-1; rhizome dry matter content of 19.42 and 25.8%; rhizome dry weight of 27.54 and 27.8g and harvest index of 2.81 and 3.20%, over other levels. Consequently, variety 021 and 400 NPK (15:15:15) kgha-1 are recommended for sole production of turmeric in Umudike, South Eastern Nigeria.


2017 ◽  
Vol 41 (1) ◽  
pp. 54 ◽  
Author(s):  
Hermanto Hermanto ◽  
Bambang Suwignyo Bambang Suwignyo ◽  
Nafiatul Nafiatul

This study aimed to analyze the quality of chemical and chlorophyll content of alfalfa plants with lenght of irradiation and dose of dolomite on the regosol soil. The experiment was conducted implemented in Greenhouse Laboratory Forage and Pasture Faculty of Animal Sciences University of Gadjah Mada, from May to September 2015. This study used a Completely Randomized Design (CRD) 3 x 3 factorial design with two factors treatments and four replications. The first factor is the dose of dolomite (D) with 3 treatment (D0 = without dolomite, D1 = dolomite 6 t/hectare or 90 g/polybag and D2= dolomite 12 t/hectare or 180 g/polybag). The second factor is the length of irradiation (C) with 3 treatments (C0 = irradiating 12 hours, C1 = irradiating 14 hours and C2 = irradiating 16 hours). Data were statistically analyzed using analysis of variance and significant results continued with Duncan test at 5% level.Parameters measured were the proximate analysis (dry matter, organic matter, crude protein, crude fiber, crude fat, ash) and alfalfa chlorophyll content. The results showed that there was no significant interaction effect between lenght of irradiation and dose of dolomite treatment to the dry matter content, organic matter, crude protein, crude fiber, crude fat, ash and alfalfa chlorophyll content. The treatment lenght of irradiation are significant (P<0,05) of the organic matter content and ash content of alfalfa. Dose of dolomite treatment was not significant on all parameters of the study. The results showed that the treatment and dosage of radiation are dolomite not significant on the production of plant fresh weight, dry weight of plants, dry matter content, organic matter, crude protein, crude fiber, crude fat, ash and content alfalfa chlorophyll. No interaction between treatment and dosage of radiation are dolomite which significantly affect production plant fresh weight, dry weight of plants, dry matter content, organic matter, crude protein, crude fiber, crude fat, ash and alfalfa chlorophyll content. (Keywords: Alfalfa, lenght of irradiation, dolomite,  regosol soil)


2018 ◽  
Vol 42 (1) ◽  
pp. 101-110
Author(s):  
Andrea Seral Puyoles ◽  
Antonio Murciano Cespedosa ◽  
Sonia Molino de Miguel ◽  
Pablo De la Fuente Brun ◽  
Jose María Gabriel y Galán

Nowadays, functional traits are widely used to study autoecological aspects in plant species. The analysis of these traits among climatic gradients allows us to know the strategy that plants follow depending on resource availability. Referring to plants, the traits measured in the leaves have a special importance; among these traits we can find SLA (Specific Leaf Area), LDMC (Leaf Dry- Matter Content) and LT (Leaf Thickness). In this work, these traits are measured in four species of the genus Asplenium. As extremes of a climatic gradient, we have focused our study in both bioclimatic regions existing in the Iberian Peninsula. Taking into account the differences referring to the resource availability for the species in each region, the main goal of this work is analyzing the variations of the three functional traits mentioned in the four species in both locations and associate these variations to macroclimatic variables. To this aim, fronds from the four species were collected in populations of each bioclimatic region to determine the fresh weight, dry weight and the foliar area. From these variables, we calculated the three functional traits. The results have shown that ferns adopt higher productive yields in the Mediterranean region (higher SLA values) and lower LDMC and LT values than in the Eurosiberian region. As to the climate variables effects, the average of the maximum temperatures in the warmest month (TMAX) is the variable that better explains the differences in the productive yield that the plants adopt in each region. On the other hand, annual precipitation seems not to play an important role on any of the functional traits in any of the species. Finally, we didn’t find a generalized tendency in the effects of the extern variables: frozen period, minimum temperatures in the coolest month and arid period.


2018 ◽  
Vol 42 ◽  
pp. 101
Author(s):  
Andrea Seral Puyoles ◽  
Antonio Murciano Cespedosa ◽  
Sonia Molino de Miguel ◽  
Pablo De la Fuente Brun ◽  
Jose María Gabriel y Galán

Nowadays, functional traits are widely used to study autoecological aspects in plant species. The analysis of these traits among climatic gradients allows us to know the strategy that plants follow depending on resource availability. Referring to plants, the traits measured in the leaves have a special importance; among these traits we can find SLA (Specific Leaf Area), LDMC (Leaf Dry-Matter Content) and LT (Leaf Thickness). In this work, these traits are measured in four species of the genus Asplenium. As extremes of a climatic gradient, we have focused our study in both bioclimatic regions existing in the Iberian Peninsula. Taking into account the differences referring to the resource availability for the species in each region, the main goal of this work is analysing the variations of the three functional traits mentioned in the four species in both locations and associate these variations to macroclimatic variables. To this aim, fronds from the four species were collected in populations of each bioclimatic region to determine the fresh weight, dry weight and the foliar area. From these variables, we calculated the three functional traits. The results have shown that ferns adopt higher productive yields in the Mediterranean region (higher SLA values) and lower LDMC and LT values than in the Eurosiberian region. As to the climate variables effects, the average of the maximum temperatures in the warmest month (TMAX) is the variable that better explains the differences in the productive yield that the plants adopt in each region. On the other hand, annual precipitation seems not to play an important role on any of the functional traits in any of the species. Finally, we didn’t find a generalized tendency in the effects of the extern variables: frozen period, minimum temperatures in the coolest month and arid period.


2020 ◽  
pp. 16-19
Author(s):  
Е.В. Янченко

Цель исследований – дать оценку сохраняемости и болезнеустойчивости современных сортов и гибридов моркови столовой и определить корреляционные зависимости влияния биохимических показателей качества на сохраняемость и степень поражения моркови столовой различными видами болезней в процессе хранения. Исследования проводились в 2011–2016 годах во ВНИИО – филиале ФГБНУ ФНЦО по общепринятым методикам. В биохимической лаборатории отдела земледелия и агрохимии содержание сухого вещества определяли высушиванием до абсолютно сухого веса, общего сахара – по Бертрану, аскорбиновой кислоты – по Мурри, нитраты – ионоселективным методом. При характеристике моркови столовой важнейший показатель, определяющий его качество – количество сухого вещества и сахаров. В процессе хранения были выявлены следующие болезни моркови: серая гниль (Botrytis cinerea Pers. ex Fr.), белая гниль (Sclerotinia sclerotiorum (Lib.)), белая парша (Rhizoctonia carotae Rad.), альтернариоз (Alternaria radicina M., Dr. et E.). В большей степени сортообразцы моркови столовой поражались серой гнилью. Лучшими по сохраняемости сортообразцами были Корсар (94,6%), F1Берлин (94,5%), Берликум Роял (94,1%) и F1 Звезда (94%). Сохраняемость у зарубежных сортов и гибридов моркови столовой была немного выше, чем у отечественных (на 0,4%) как за счет меньшей величины убыли массы (6,3% против 6,4%), так и потерь от болезней (1,6% против 1,9%). Сохраняемость корнеплодов моркови находится в прямой корреляционной зависимости от содержания сухого вещества (r=+0,41), каротиноидов (r=+0,39), моносахаров (r­=+0,30) и суммы сахаров (r=+0,27). Проявление серой гнили находится в обратной корреляционной связи с содержанием сухого вещества и каротиноидов (r=-0,37 и r=-0,35 соответственно), белой парши – в прямой корреляции с содержанием сухого вещества , моносахаров и дисахаров (r= +0,21; r= +0,39; r= -0,41 соответственно), белой гнили в обратной корреляционной связи с содержанием сухого вещества, моносахаров и дисахаров. The purpose of the research is to assess the persistence and disease resistance of modern varieties and hybrids of carrots and to determine the correlation between the influence of biochemical quality indicators on the persistence and degree of damage to carrots by various types of diseases during storage. The research was conducted in 2011–2016 at ARRIVG – branch of FSBSI FSVC, according to generally accepted methods. In the biochemical laboratory of the Department of Agriculture and Agrochemistry, the dry matter content was determined by drying to absolutely dry weight, total sugar – by Bertran, ascorbic acid – by Murri, nitrates – by the ion-selective method. When describing carrots, the most important indicator that determines its quality is the amount of dry matter and sugars. During storage, the following diseases of carrots were detected: gray rot (Botrytis cinerea Pers. ex Fr.), white rot (Sclerotinia sclerotiorum (Lib.), white scab (Rhizoctonia carotae Rad.), alternariasis (Alternaria radicina M., Dr. et E.). To a greater extent, varieties of table carrots were affected by gray rot. The best preserved varieties were Corsar (94.6%), F1 Berlin (94.5%), Berlicum Royal (94.1%) and F1 Zvezda (94%). The persistence of foreign varieties and hybrids of table carrots was slightly higher than that of domestic ones by 0.4%. both due to a smaller amount of weight loss (6.3% vs. 6.4%) and losses from diseases (1.6% vs. 1.9%). The persistence of carrot root crops is directly correlated with the content of dry matter (r=+0.41), carotenoids (r=+0.39), monosaccharides (r=+0.30) and the amount of sugars (r=+0.27). The manifestation of gray rot is in inverse correlation with the content of dry matter and carotenoids (r=-0.37 and r=-0.35, respectively), white scab is in direct correlation with the content of dry matter (r= +0.21; r= +0.39; r= –0.41, respectively), white rot is in inverse correlation with the content of dry matter, monosaccharides and disaccharides.


PLoS ONE ◽  
2021 ◽  
Vol 16 (1) ◽  
pp. e0245505
Author(s):  
Xiaofei Chen ◽  
Ruidong Zhang ◽  
Yifan Xing ◽  
Bing Jiang ◽  
Bang Li ◽  
...  

Sorghum [Sorghum bicolor (L.) Moench] seed germination is sensitive to salinity, and seed priming is an effective method for alleviating the negative effects of salt stress on seed germination. However, few studies have compared the effects of different priming agents on sorghum germination under salt stress. In this study, we quantified the effects of priming with distilled water (HP), sodium chloride (NaCl), potassium chloride (KCl), calcium chloride (CaCl2), and polyethylene glycol (PEG) on sorghum seed germination under 150 mM NaCl stress. The germination potential, germination rate, germination index, vigor index, root length, shoot length, root fresh weight, shoot fresh weight, root dry weight, and shoot dry weight were significantly reduced by salt stress. Different priming treatments alleviated the germination inhibition caused by salt stress to varying degrees, and 50 mM CaCl2 was the most effective treatment. In addition, the mitigation effect of priming was stronger on root traits than on shoot traits. Mitigation efficacy was closely related to both the type of agent and the concentration of the solution. Principal component analysis showed that all concentrations of CaCl2 had higher scores and were clearly distinguished from other treatments based on their positive effects on all germination traits. The effects of the other agents varied with concentration. The priming treatments were divided into three categories based on their priming efficacy, and the 50, 100, and 150 mM CaCl2 treatments were placed in the first category. The 150 mM KCl, 10% PEG, HP, 150 mM NaCl, 30% PEG, and 50 mM KCl treatments were placed in the second category, and the 100 mM NaCl, 100 mM KCl, 20% PEG, and 50 mM NaCl treatments were least effective and were placed in the third category. Choosing appropriate priming agents and methods for future research and applications can ensure that crop seeds germinate healthily under saline conditions.


1976 ◽  
Vol 87 (2) ◽  
pp. 443-446 ◽  
Author(s):  
O. A. Denton ◽  
W. J. Whittington

SummaryThe mean total yield and mean fresh weight of seven swede varieties and their F1 hybrids was increased primarily by nitrogen and also by phosphorus fertilizer. There was no evidence of genotype × environment interaction for characters concerned with yield except for dry-matter content where two varieties, Best-of-All and Reform, were less stable to fertility environments than the others. Heterosis was common amongst F1 hybrids and this suggests their use in swede improvement: the inheritance pattern of root weight showed overdominance, shoot weight showed partial dominance and drymatter content showed additivity, with no evidence of gene interaction. Segregation for root fresh weight and dry-matter content occurred in F2 populations and although an overall negative correlation was found there was evidence that progeny from certain crosses gave reasonable prospects of combining both characters.


2018 ◽  
Vol 11 (1) ◽  
pp. 30 ◽  
Author(s):  
Kiatkamjon Intani ◽  
Sajid Latif ◽  
Md. Islam ◽  
Joachim Müller

Biochar from crop residues such as corncobs can be used for soil amendment, but its negative effects have also been reported. This study aims to evaluate the phytotoxic effects of different biochar treatments and application rates on cress (Lepidium sativum). Corncob biochar was produced via slow pyrolysis without using purging gas. Biochar treatments included fresh biochar (FB), dried biochar (DB), washed biochar (WB), and biochar water extract (WE). Biochar application rates of 10, 20, and 30 t/ha were investigated. Significant phytotoxic effects of biochar were observed on germination rates, shoot length, fresh weight, and dry matter content, while severe toxic effects were identified in FB and WE treatments. Germination rate after 48 h (GR48) decreased with the increase of biochar application rates in all treatments. The observed order of performance of the biochar treatments for germination, shoot length, and shoot fresh weight for every biochar application rate was WB>DB>WE>FB, while it was the reverse order for the shoot dry matter content. WB treatment showed the best performance in reducing the phytotoxicity of biochar. The mitigation of the phytotoxicity in fresh corncob biochar by washing and heat treatment was found to be a simple and effective method.


Author(s):  
J.M. De Ruiter ◽  
S. Maley ◽  
M. Robson

Abstract Timing of harvest is the single most important factor affecting the yield and quality of whole-crop cereals used for conserved feed. Changes in dry matter content (%DM) and relationships to herbage quality and maturation are presented for experiments conducted over three seasons beginning in 2001/ 2002. Changes in crop characteristics such as ear moisture, ear fresh weight, ear dry weight and leaf fraction were monitored to determine whether growers could use crop-based measurements in place of whole-crop % DM content to assist withdecision making close to harvest. A preliminary model defined the rate of crop maturation for a range of currently grown cultivars. Linear patterns of dry down occurred with only small variation in drying rate for the duration of grain filling. A model with specific inputs for cultivar, date of awn tip appearance (GS49), and developmental response to thermal time formed the basis of a decision support tool that enables growers and contractors to predict optimum harvest timing for whole-crop cereals. Keywords: silage maturity, supplements, forage, herbage quality


Sign in / Sign up

Export Citation Format

Share Document