scholarly journals Custom Clothing Technology: Diffusion of Luxury Practices in Fashion

2019 ◽  
Vol 2 (1) ◽  
pp. 1-27
Author(s):  
Nicholas Paganelli
Keyword(s):  
New Technology ◽  
3D Scanning ◽  
Full Potential ◽  
Fashion Industry ◽  
Doing Business ◽  
3D Scanners ◽  
Design Production ◽  
The Common ◽  
Nuanced Understanding ◽  
Common Understanding

The common understanding of the fashion industry is that it is rapidly changing and constantly on the cutting edge of what is new. Yet in reality the fashion industry does not adopt new practices or change its ways of doing business quite so easily. This article examines the successes and failures of 3D scanning as a new tool in the fashion industry. Through the analysis of three case studies it becomes clear that new technology is not an automatic guarantor of innovation or success. Analyzing the motivations behind the introduction of 3D scanning for made-to-measure clothing products is important to understanding where technology and the fashion practitioner do not necessarily communicate properly. Whereas 3D scanning promises to make made-to-measure clothing an easy and accessible service, made-to-measure and other custom clothing businesses are based upon traditional notions of luxury and craftsmanship. It is apparent through first-person interviews and observations that the current dichotomy between technology and craftsmanship has not been resolved. Creators of fashion-based technologies need to be working in tandem with traditional fashion practitioners, whose expertise is required if new technology is to reinvent the centuries-old processes of clothing production for the better. 3D scanners that have been introduced to date have yet to meet their full potential because they lack the nuanced understanding of the human body that comes from traditional clothes-making training and expertise. Researching the present status of this technology’s integration within fashion is important in understanding how digital technology is best included in the design, production, and sale of clothing products more broadly.

scholarly journals On recovery: re-directing the concept by differentiation of its meanings

2021 ◽  
Author(s):  
Yael Friedman
Keyword(s):  
First Person ◽  
State Of Health ◽  
Health It ◽  
Social Perspective ◽  
Social Perspectives ◽  
Person Perspective ◽  
The Common ◽  
First Person Perspective ◽  
Nuanced Understanding ◽  
Common Understanding

AbstractRecovery is a commonly used concept in both professional and everyday contexts. Yet despite its extensive use, it has not drawn much philosophical attention. In this paper, I question the common understanding of recovery, show how the concept is inadequate, and introduce new and much needed terminology. I argue that recovery glosses over important distinctions and even misrepresents the process of moving away from malady as "going back" to a former state of health. It does not invite important nuances needed to distinguish between biomedical, phenomenological, and social perspectives. In addition, I claim that there are many conditions where we are making use of the concept of recovery, although the person recovered from the condition in question, has not regained the same degree of soundness. I show how the concept of recovery leads to conceptual discrepancies that can result in worsening patients' conditions. To gain a fuller understanding, I propose to rethink the direction of the process in question. I define the process of moving away from malady as a move forward towards a new state of soundness. I also suggest three terms, corresponding to different perspectives, to describe this movement forward: 'curing' (biomedical perspective), 'healing' (first-person perspective), and 'habilitating' (social perspective). This new terminology provides a more nuanced understanding of the states of both malady and soundness and an attentiveness as to how they differ and relate.

BARRIERS TO NEW TECHNOLOGY DISSEMINATION IN THE CONSTRUCTION INDUSTRY

2016 ◽  
Vol 3 (1) ◽  
Author(s):  
Masoud Zavari ◽  
Mohammad Mehdi Mortaheb ◽  
Hamed Kashani
Keyword(s):  
Literature Review ◽  
Construction Industry ◽  
New Technologies ◽  
New Technology ◽  
Full Potential ◽  
Common Belief ◽  
Technology Dissemination ◽  
New Construction ◽  
The Common ◽  
Splicing Systems

Despite the common belief, there is a considerable amount of innovation that occurs in the construction industry. However, the construction industry has been relatively slow to embrace the full potential of many new technologies. Evidence suggests that there is a lag in the uptake and effective implementation of several new technologies such as mechanical rebar splicing system. The objective of this study is to identify the impediments or barriers to the implementation of innovative technologies such as mechanical rebar splicing systems in the construction industry. A comprehensive literature review is conducted to identify and classify the barriers to new technologies dissemination. The findings of this literature review are validated using interviews with the construction industry experts. This study contributes to the state of knowledge by identifying and classifying the barriers that generally hinder the dissemination of new technologies in the construction industry. The practitioners can utilize the findings of this study to design appropriate strategies to overcome the barriers for implementation of new construction technologies. As part of this study, the extent to which the identified barriers have hindered the adoption of rebar splices, a technology that has not been adapted to its full potential. A questionnaire was designed, which was categorized the identified barrier in five major categories of cost, society and regulation, knowledge, marketing, and technical matters. The findings of the survey it was concluded that the lack of knowledge has the highest level of impact.

RELASI SOSIO-EKONOMI PETANI DENGAN PEMILIK LAHAN MELALUI KONSEP MUKHĀBARAH DAN MUZĀRA‘AH DI DESA ARANG LIMBUNG KECAMATAN SUNGAI RAYA KABUPATEN KUBU RAYA

2017 ◽  
Vol 12 (2) ◽  
pp. 425
Author(s):  
Rasiam Rasiam
Keyword(s):  
Economic Cooperation ◽  
Profit Sharing ◽  
Sufficient Time ◽  
Doing Business ◽  
The Common ◽  
Social Consideration

This writing addresses the practice of mukhabarah and muzara’ah in cultivating farms in Arang Limbung village, Sungai Raya district, Kubu Raya regency. Socioeconomic cooperation between farmhands and land lords constitute a mutual symbiosis; by cooperating they can handle the problems of cultivating farms. Landlords do not have sufficient time and skill to cultivate their farms while farmhands do not have land to plough. Consequently, they must collaborate through the concept of mukhabarah and muzaraah in which the profit sharing is according to the common agreement. This socioeconomic cooperation is based on trust and fair profit sharing that include: first, the basis of this cooperation is to help each other instead of doing business; and second, the profit sharing is according to farms production. Thus, this collaboration is not only based on profit objectives but social consideration as well. Keywords: Mukhābarah, muzāra‘ah, socio economic cooperation.

The impact of applying the Common Customs Tariff on the armenian export of Cut and Polished Gems to Russia

2019 ◽  
pp. 33-41
Author(s):  
V. L. Harutyunyan ◽  
S. V. Dokholyan ◽  
A. R. Makaryan
Keyword(s):  
Manufacturing Sector ◽  
Practical Implication ◽  
Dominant Role ◽  
New Technology ◽  
Manufacturing Companies ◽  
Medium Term ◽  
Diamond Cutting ◽  
Global Trends ◽  
The Common ◽  
The Impact

The presented study discusses the issues of applying the Common Customs Tariff (CCT) rates of the Eurasian Economic Union (EAEU) on rough diamonds and the impact thereof on the exports of stones cut and polished inArmeniaand then exported toRussia.Aim. The study aims to identify the possible strategies Armenian diamond cutting and polishing companies could adopt as a response to the application of the CCT rates on rough diamonds and how it would affect exports to various destinations, namely to Russia.Tasks. The authors analyze the current state of the gems and jewelry sector and substantiate the need to either integrate it into the jewelry manufacturing sector or to apply various strategies to facilitate exports to either Russia or other destinations in the medium term in response to the application of the CCT rates.Methods. This study uses general scientific methods of cognition, including analytical and methodological approaches and elements of forecasting. Possible strategies the Armenian diamond cutting and polishing companies could adopt in the medium term in response to the application of the EAEU CCT rates are determined using the analytical research method, forecasts in the context of the developments in the Armenian gem processing and jewelry market and global trends, statistical data on the imports and exports of cut and polished gems and jewelry for 2014–2018 published by the UN Comtrade Statistics.Results. Statistics on the exports of processed diamonds from 2014 to 2018 highlights the issue associated with the loss of competitiveness suffered by Armenian companies (mainly in comparison with Indian diamond cutters). The major global trends in the diamond cutting and polishing business indicate that it could be virtually impossible for Armenian cutters and polishers to compete with Indian companies in the medium term if they do not comes to investing in new technology to achieve operational efficiency. For these companies, it is important not to lose the Russian market due to an increase in the tariff rate and concentrate on the processing of gems that are larger than 1 carat. Another strategy to avoid an increase in the customs tariff rates would depend on the Armenian government’s ability to negotiate with Russia in respect of direct imports of diamond stones from Russian manufactures. Two other options for Armenian cutters involve focusing on cutting and polishing of rubies, sapphires, emeralds, etc. or integrating into the jewelry sector either by being the primary supplier or by considering this business as a channel to sell processed diamond stones by setting up their own jewelry manufacturing companies.Conclusions. With CCT going into effect in January 2021 and India’s dominant role in the diamond cutting and polishing business, Armenia needs to carefully consider all of the strategies the Armenian companies could adopt, as discussed above. As a member state of the EAEU, Armenia freely exports to Russia, however, further exports to Russia would depend on Armenia’s ability to ensure that cost-effective operations are in place, or to concentrate on the processing of precious gems rather than diamonds, or to switch to the manufacturing of jewelry items as a major export item.Practical Implication. The findings of this study could be of interest to the Ministry of Economy of the Republic of Armenia and Business Armenia that could be used in elaborating the strategy for the development of Armenian gems and jewelry sector of the economy.

The Influence of Personality Traits on Consumer Impulsive Buying Behaviour

2016 ◽  
Vol 5 (1) ◽  
Author(s):  
Khagendra Nath Gangai ◽  
Rachna Agrawal
Keyword(s):  
Personality Traits ◽  
Cultural Influences ◽  
Buying Behavior ◽  
Doing Business ◽  
The Social ◽  
Impulsive Buying ◽  
Social And Physical Environment ◽  
The Common ◽  
Buying Behaviour

Consumer behavior is a complex phenomenon which is evolving according to the time, situations, demographic characteristics of individuals, personality traits, cultural influences etc. The personality of individuals is a unique dynamic organization of the characteristics of a particular person, physical and psychological, which influence behavior and responses to the social and physical environment. It gives the impression that consumer buying is always influenced by their personality. Therefore, many marketers make use of personality traits in the advertisement of products and at the same time they enhance their marketing strategy. The marketers always designed different products and target specific market segments which commonly addressed on individuals personality traits. The individuals few personality traits influence consumer for impulsive buying behavior. The aim of present research is to study the personality traits influence on consumer impulsive buying behavior as it will help to create opportunities of doing business and dealing with customers. The objectives of this research are: (1) to investigate the influence of personality traits on consumer impulsive buying behavior, and (2) to identify the role of gender and their personality traits influence on consumer impulsive buying behavior. To fulfill the purpose of the study, the researchers randomly collected sample and divided them on the basis of gender, 60 males and 60 females. Data were collected from Delhi and NCR region. The data were analyzed using statistical applications such as correlation and t Test. The result was revealed that the common personality traits have a significant relationship with impulsive buying behavior that is psychoticism in the case of male and female. The role of gender has significant differences in impulsive buying behavior. The man showed more impulsive buying behavior compare to women.

scholarly journals Structured-light 3D scanning of exhibited historical clothing—a first-ever methodical trial and its results

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Jerzy Montusiewicz ◽  
Marek Miłosz ◽  
Jacek Kęsik ◽  
Kamil Żyła
Keyword(s):  
Cultural Heritage ◽  
Information Technologies ◽  
Structured Light ◽  
Three Dimensional ◽  
3D Models ◽  
3D Scanning ◽  
Dimensional Representation ◽  
3D Scanner ◽  
Three Dimensional Representation ◽  
3D Scanners

AbstractHistorical costumes are part of cultural heritage. Unlike architectural monuments, they are very fragile, which exacerbates the problems of their protection and popularisation. A big help in this can be the digitisation of their appearance, preferably using modern techniques of three-dimensional representation (3D). The article presents the results of the search for examples and methodologies of implementing 3D scanning of exhibited historical clothes as well as the attendant problems. From a review of scientific literature it turns out that so far practically no one in the world has made any methodical attempts at scanning historical clothes using structured-light 3D scanners (SLS) and developing an appropriate methodology. The vast majority of methods for creating 3D models of clothes used photogrammetry and 3D modelling software. Therefore, an innovative approach was proposed to the problem of creating 3D models of exhibited historical clothes through their digitalisation by means of a 3D scanner using structural light technology. A proposal for the methodology of this process and concrete examples of its implementation and results are presented. The problems related to the scanning of 3D historical clothes are also described, as well as a proposal how to solve them or minimise their impact. The implementation of the methodology is presented on the example of scanning elements of the Emir of Bukhara's costume (Uzbekistan) from the end of the nineteenth century, consisting of the gown, turban and shoes. Moreover, the way of using 3D models and information technologies to popularise cultural heritage in the space of digital resources is also discussed.

scholarly journals An Early European Critic of Hobbes’s De Corpore

2017 ◽  
Vol 30 (1) ◽  
pp. 4-27 ◽  
Author(s):  
Stephen Clucas
Keyword(s):  
Natural Philosophy ◽  
Critical Reception ◽  
Human Being ◽  
The Common ◽  
The Creation ◽  
Common Understanding ◽  
Previous Scholarship ◽  
Philosophical Underpinning ◽  
Scholastic Tradition

The Animadversiones in Elementorum Philosophiae by a little known Flemish scholar G. Moranus, published in Brussels in 1655 was an early European response to Hobbes’s De Corpore. Although it is has been referred to by various Hobbes scholars, such as Noel Malcolm, Doug Jesseph, and Alexander Bird it has been little studied. Previous scholarship has tended to focus on the mathematical criticisms of André Tacquet which Moranus included in the form of a letter in his volume. Moranus’s philosophical objections to Hobbes’s natural philosophy offer a fascinating picture of the critical reception of Hobbes’s work by a religious writer trained in the late Scholastic tradition. Moranus’s opening criticism clearly shows that he is unhappy with Hobbes’s exclusion of the divine and the immaterial from natural philosophy. He asks what authority Hobbes has for breaking with the common understanding of philosophy, as defined by Cicero ‘the knowledge of things human and divine’. He also offers natural philosophical and theological criticisms of Hobbes for overlooking the generation of things involved in the Creation. He also attacks the natural philosophical underpinning of Hobbes’s civil philosophy. In this paper I look at a number of philosophical topics which Moranus criticised in Hobbes’s work, including his mechanical psychology, his theory of imaginary space, his use of the concept of accidents, his blurring of the distinction between the human being and the animal, and his theories of motion. Moranus’s criticisms, which are a mixture of philosophical and theological objections, gives us some clear indications of what made Hobbes’ natural philosophy controversial amongst his contemporaries, and sheds new light on the early continental reception of Hobbes’s work.

Sign in / Sign up

Export Citation Format

Share Document