Impact of Electromagnetic Environment on Reliability Assessment for Railway Signalling Systems

2012 ◽  
pp. 151-173 ◽  
Author(s):  
Iñigo Adin ◽  
Jaizki Mendizabal ◽  
Jon del Portillo
Keyword(s):  
Reliability Assessment ◽  
Rolling Stock ◽  
Noise Environment ◽  
Communication Signal ◽  
Railway Infrastructure ◽  
Railway Industry ◽  
Railway System ◽  
Railway Signalling ◽  
The Relationship ◽  
Signalling Systems

The electromagnetic interferences (EMI) are threats that affect the reliability of the railway signalling systems. Consequently, the identification of the reliability requirements dependent on environment conditions is a major issue for signalling systems designers, and therefore for evaluators, and testing and certification bodies. Signalling systems work in the complex and heterogeneous railway environment, where low power electronics have to work together with high voltages and currents from trains and railway infrastructure. This chapter presents the relationship between the railway electromagnetic interoperability and the reliability assessment by analyzing the signalling systems and the associated inter-dependencies with other components of the rolling stock. It is composed of two main sections; the first gathers an exhaustive state of the art approach to the issue of electromagnetic interoperability and railway industry. This subsection steers towards the combination of electromagnetic interferences and the signalling systems present in the rolling stock noise environment. That is the basis of the second section that finally sets how to establish the reliability requirement for a communication path in this environment. This requirement is established because of the electromagnetic noise environment, as well as the radiated and conducted fields, which are a combination of all the surrounding threats a focused railway system has to face. It also depends on the modulation of the communication signal under study.

scholarly journals High-Speed Railway

Encyclopedia ◽  
2021 ◽  
Vol 1 (3) ◽  
pp. 665-688
Author(s):  
Inara Watson
Keyword(s):  
High Speed ◽  
Weight Ratio ◽  
Rolling Stock ◽  
High Speed Railway ◽  
Signalling System ◽  
Railway System ◽  
Speed Up ◽  
Signalling Systems

Union Internationale des Chemins (UIC) defines the high-speed railway (HSR) as a high-speed railway system that contains the infrastructure and the rolling stock. The infrastructure can be newly built dedicated lines enabled for trains to travel with speed above 250 km/h or upgraded conventional lines with a speed up to 200 or even 220 km/h. HSR requires specially built trains with increased power to weight ratio and must have an in-cab signalling system as traditional signalling systems are incapable of above 200 km/h.

scholarly journals Introduction of the Latest Railway Technology based on Intersectoral Cooperation

2021 ◽  
Vol 18 (4) ◽  
pp. 188-198
Author(s):  
P. S. Troitskiy
Keyword(s):  
Technological Progress ◽  
Rolling Stock ◽  
Transport Sector ◽  
External Effects ◽  
Intersectoral Cooperation ◽  
Regional Features ◽  
Railway Infrastructure ◽  
Railway Industry ◽  
Multiple Unit ◽  
Business Entities

The article studies direct and external effects produced by the development of railway infrastructure facilities. Examples of intersectoral cooperation in the transport sector in Russian and international practices confirm that development of intersectoral production and transport interaction of business entities allows to radically accelerate scientific and technological progress in the railway industry, namely, to develop and introduce new models of railway rolling stock, new transportation technology, considering also regional features of the transportation market.The practical part considers the advantages of introduction of freight electric multiple-unit trains (FEMUT), identifying the main groups of cargo owners, for whom this type of rolling stock is intended. The results of calculations show possible reduction in running time and in specific consumption of electric power when introducing FEMUT. The calculated costs of self-propelled (motor) and trailer wagons of FEMUT are followed by the results of economic calculations of NPV of life cycle operation of FEMUT in comparison with a train with locomotive traction. To achieve the stated objectives of the research, the work uses methods and tools of technical comparison and of financial planning.

About the possibility of women work in train driver and train driver assistant profession

2020 ◽  
Vol 60 (11) ◽  
pp. 778-781
Author(s):  
Anna A. Zakrevskaya ◽  
Ekaterina V. Dmitrieva
Keyword(s):  
Professional Growth ◽  
Online Survey ◽  
Psychological Climate ◽  
Rolling Stock ◽  
Equal Rights ◽  
Mixed Composition ◽  
Labor Legislation ◽  
Railway Industry ◽  
Train Driver ◽  
Electric Train

Introduction. The article presents the results of a survey of employees of the railway industry and volunteers of various professions on their attitude to the possibility of employment of women as a locomotive driver and assistant driver. The aim of study is to determine the socio-psychological aspects of allowing women to work as a driver and assistant driver of an electric train among employees of various professions, including in the railway industry. Materials and methods. Anonymous online survey conducted among 112 people: 60 women aged 29.9±7.9 years (from 19 to 55 years), and 52 men aged 29.6±8.4 years (from 15 to 53 years). Results. There is an ambiguous attitude to the prospects of allowing women to work as a driver and assistant driver of an electric train. The most urgent problems of an organizational nature that accompany changes in labor legislation are noted: the abolition of allowances "for harm", the increase in the retirement age, inconveniences in holiday homes that are currently designed exclusively for men. There are also positive prospects for these changes: the possibility of healthy professional competition and the emergence of new areas of professional growth for women, as well as increasing the prestige of OAS "Russian Railways" by creating an image of a company that provides candidates with equal rights regardless of gender. Conclusions. The appearance (although it would be more accurate to say "return") of women to work as drivers and assistant drivers is not a forced measure, as it was in wartime, but the result of the modernization of rolling stock and railway infrastructure, bringing to the fore the assessment of professionally important operator qualities, regardless of the gender of candidates. However, gender characteristics cannot be ignored in the socio-psychological context - for example, when recruiting locomotive crews with mixed composition or when creating a favorable psychological climate in a locomotive depot.

INVESTMENTS IN THE LOCOMOTIVE COMPLEX INFRASTRUCTURE. INFRASTRUCTURE NEEDS PLANS AND FORECASTS

2020 ◽  
Vol 1 (4) ◽  
pp. 106-110
Author(s):  
A. G. YEROYAN ◽  
Keyword(s):  
Significant Role ◽  
Rolling Stock ◽  
Infrastructure Development ◽  
Electric Locomotive ◽  
Maintenance And Repair ◽  
Technological Readiness ◽  
Railway Industry ◽  
Locomotive Repair

In connection with the prospects for the development of the railway industry until 2030, a significant role in improving the technological readiness of maintenance and repair of traction rolling stock belongs to diesel, electric locomotive repair and service depots. The article considers the main directions of development and modernization of the locomotive complex infrastructure. Possible methods of financing mechanisms for investment in infrastructure development have been identified.

Coordination of technology of railway operation of the Republic of Tajikistan and organization of railways in international traffic

2018 ◽  
Vol 77 (4) ◽  
pp. 211-217 ◽  
Author(s):  
P. N. Pulatov
Keyword(s):  
Rolling Stock ◽  
Railway Transport ◽  
Transport Services ◽  
Railway Infrastructure ◽  
External Conditions ◽  
The Republic ◽  
Railway Operation ◽  
Required Quality

Current geopolitical and economic conditions for the functioning of railway transport in most post-Soviet states are such that it is extremely difficult to provide required quality of transport services and break-even operations at high expenses for maintaining the railway infrastructure and rolling stock. Dynamics of transportation of the Tajik Railway (TSR) is shown, which displays that most of its sections are classified as low-intensity ones. The paper proposes methodical principles, setting and qualitative analysis of the task of rationalization of operational work and organization of car flows for international transportation, taking into account the specifics of the Tajik Railway. There is a problem of complex maintenance of the efficiency of operational work in modern conditions based on the synthesis of the tasks of self-management (rational internal operational technology of the Tajik Railway) and coordination tasks (technological interaction with railway administrations of other states). Author substantiated the necessity of solving this problem. Proposed classification of technological restrictions and controlled variables in the performance of transport takes into account methods for changing external conditions for the functioning of the railway landfill and methods for increasing internal efficiency of its operation. The search for the solution of the problem involves direct search of variants along its ordered set with clipping of groups of variants that do not correspond to constraints, with the subsequent finding of compromise control over a set of effective alternatives.

Experimental study on the relationship between the friction coefficient and interference in locomotive axle press-fitting

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ting Wang ◽  
Hanfei Guo ◽  
Jianjun Qiao ◽  
Xiaoxue Liu ◽  
Zhixin Fan
Keyword(s):  
Friction Coefficient ◽  
Coefficient Of Friction ◽  
Friction Pair ◽  
Rolling Stock ◽  
Content Type ◽  
Press Fitting ◽  
The Press ◽  
The Coefficient Of Friction ◽  
The Relationship ◽  
Locomotive Wheels

PurposeTo address the lack of data in this field and determine the relationship between the coefficient of friction and the interference between locomotive wheels and axles, this study evaluates the theoretical relationship between the coefficient of friction and the interference under elastic deformation.Design/methodology/approachWhen using numerical analyses to study the mechanical state of the contacting components of the wheels and axle, the interference between the axle parts and the coefficient of friction between the axle parts are two important influencing factors. Currently, as the range of the coefficient of friction between the wheel and axle in interference remains unknown, it is generally considered that the coefficient of friction is only related to the materials of the friction pair; the relationship between the interference and the coefficient of friction is often neglected.FindingsA total of 520 press-fitting experiments were conducted for 130 sets of wheels and axles of the HXD2 locomotive with 4 types of interferences, in order to obtain the relationship between the coefficient of friction between the locomotive wheel and axle and the amount of interference. These results are expected to serve as a reference for selecting the coefficient of friction when designing axle structures with the rolling stock, research on the press-fitting process and evaluations of the fatigue life.Originality/valueThe study provides a basis for the selection of friction coefficient and interference amount in the design of locomotive wheels and axles.

Investigation of the causes of damage to freight cars during disbanding on non-mechanized sorting slides and development of measures to prevent them

2021 ◽  
pp. 4-13
Author(s):  
S. V. Tankeev ◽  
◽  
A. E. Kolodin ◽  
V. B. Sverdlov ◽  
A. V. Nazarov ◽  
...  
Keyword(s):  
Low Power ◽  
Coefficient Of Friction ◽  
Damage Assessment ◽  
Laboratory Tests ◽  
Rolling Stock ◽  
Third Body ◽  
Normative Documents ◽  
The Coefficient Of Friction ◽  
Loading And Unloading ◽  
The Relationship

The damage assessment of freight cars during shunting and loading and unloading operations was made. The need to review the normative documents regulating the relationship between the owners of rolling stock, owners of non-public tracks and the carrier is noted. The reasons for formation of damage on the wheel pairs of freight cars when disbanding on low-power sorting slides are considered. The conditions for ensuring the deceleration of detachments on non-mechanized sorting slides without damaging the wheels are determined. The analysis of methods for ensuring braking on low-power slides is carried out. A method was chosen to ensure the wheel set rotation by introducing a third body between the rubbing surfaces during the braking of cars, which will take over a part of the resulting heat flow, reducing the temperature and increasing the coefficient of friction in the «wheel-rail» contact zone. A method is proposed to provide braking on the non-mechanized sorting slide during shoe braking by applying a friction compound to a non-working rail. Laboratory tests were carried out, which showed that the introduction of a friction additive can achieve the necessary coefficient of friction to comply with the standard parameters of deceleration of the car in the braking zone.

FORMATION OF EXPERIMENTAL AND METHODICAL BASIS TO ESTIMATE STRENGTH CORRESPONDENCE OF DOMESTIC PASSENGER CAR BODIES TO EUROPEAN STANDARD BASIS

2021 ◽  
Vol 2021 (8) ◽  
pp. 67-76
Author(s):  
Sergey Korshunov ◽  
Aleksandr Skachkov ◽  
Sergey Samoshkin ◽  
Aleksandr Smirnov ◽  
Dmitriy Goncharov
Keyword(s):  
International Markets ◽  
The Body ◽  
Standard Basis ◽  
Rolling Stock ◽  
European Standard ◽  
Static Tests ◽  
Railway Infrastructure ◽  
Methodical Basis ◽  
Equipment Development ◽  
European Standards

The development of the international trade and the entrance of domestic car manufacturers into international markets required bench equipment development for tests in accordance with the requirements of the European standards. In this connection the purpose of this work is to develop an experimental and methodical basis for the estimation of the strength correspondence of export railway produce to the European standard basis. In the work there is shown a description of the bench developed for static tests of rolling stock for loads corresponding to the European standard basis. In the requirements mentioned there is used a more extended list of loads and combination of efforts and the necessity in the application of longitudinal loads to the elements of the end wall in three levels should be particularly emphasized. On the test bench there are carried out static tests of the car of model 61-4514 for Egyptian national railways and the body of the motor-rail car of model 2853 for the railway infrastructure of Serbia.

scholarly journals A Review in Fault Diagnosis and Health Assessment for Railway Traction Drives

2018 ◽  
Vol 8 (12) ◽  
pp. 2475 ◽  
Author(s):  
Fernando Garramiola ◽  
Javier Poza ◽  
Patxi Madina ◽  
Jon del Olmo ◽  
Gaizka Almandoz
Keyword(s):  
Fault Diagnosis ◽  
Health Assessment ◽  
Condition Based Maintenance ◽  
System Availability ◽  
Railway Systems ◽  
Railway Industry ◽  
Railway Traction ◽  
Railway System ◽  
Traction Drives ◽  
Early Fault Detection

During the last decade, due to the increasing importance of reliability and availability, railway industry is making greater use of fault diagnosis approaches for early fault detection, as well as Condition-based maintenance frameworks. Due to the influence of traction drive in the railway system availability, several research works have been focused on Fault Diagnosis for Railway traction drives. Fault diagnosis approaches have been applied to electric machines, sensors and power electronics. Furthermore, Condition-based maintenance framework seems to reduce corrective and Time-based maintenance works in Railway Systems. However, there is not any publication that summarizes all the research works carried out in Fault diagnosis and Condition-based Maintenance frameworks for Railway Traction Drives. Thus, this review presents the development of Health Assessment and Fault Diagnosis in Railway Traction Drives during the last decade.

Sign in / Sign up

Export Citation Format

Share Document