Rice Husk Reinforcement in Polymer Composites

2016 ◽  
pp. 165-191
Author(s):  
Sanjay Sharma ◽  
Deepak Verma
Keyword(s):  
Mechanical Properties ◽  
Rice Husk ◽  
Low Cost ◽  
Petroleum Products ◽  
Natural Fibre ◽  
Low Density ◽  
Thermal And Mechanical Properties ◽  
Coconut Husk ◽  
Fibre Composites ◽  
Petroleum Reserves

Increasing concern about global warming and depleting petroleum reserves and the high cost of petroleum products had made scientists to focus more on the use of natural fibres such as rice husk, baggase, coconut husk, hemp, sisal, jute, flax, banana etc. Past decade has shown many efforts to develop composites to replace the Petroleum and other non-decaying material products. Reinforcement with natural fibre in composites has recently gained attention due to low cost, easy availability, low density, acceptable, strength full, stiffness, ease of separation, enhanced energy recovery, biodegradability and recyclable in nature. Natural fibre composites are suitable as wood substitutes in the construction sector. All these have excellent physical, thermal and mechanical properties and can be utilized more effectively in the development of composite materials. In this connection, an investigation has been carried using rice husk, a natural fibre abundantly available in India.

Tensile Characteristics of Waste Based Natural Fibre Composites from Rice Husk and Low Density Polythene Waste

2021 ◽  
pp. 399-408
Author(s):  
P. M. I. B. Abesinghe ◽  
S. N. B. M. W. Y. S. Narayana ◽  
H. M. C. C. Somarathna
Keyword(s):  
Rice Husk ◽  
Natural Fibre ◽  
Low Density ◽  
Fibre Composites

scholarly journals Preparation of Linear Low-density Polyethylene/Treated Date Palm Leaflet Green Composites and Investigation of their Thermal and Mechanical Properties

2019 ◽  
Vol 35 (1) ◽  
pp. 200-206
Author(s):  
Mashael Alshabanat
Keyword(s):  
Mechanical Properties ◽  
Tensile Testing ◽  
Date Palm ◽  
Low Cost ◽  
Gum Arabic ◽  
Renewable Resource ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Thermal And Mechanical Properties ◽  
Linear Low Density Polyethylene

This work aims to develop green linear low-density polyethylene (LLDPE) composites that are commercially viable due to the low cost of the date palm leaflet filler, which is a local renewable resource. The filler was naturally treated with gum arabic solution. FT-IR, XRD, and SEM techniques were used to characterize the samples. The thermal and mechanical properties were measured by TGA, DSC, and tensile testing. The results showed noticeable changes in the properties of the composites compared to those of the original LLDPE sample. TGA revealed that the composite started thermally. The composites started thermally degrading before the original polymer, owing to the degradation of the natural components in the filler. The findings from DSC suggested that the crystallinity was affected. The tensile testing results indicated that the composites were appropriate for applications requiring low tensile strength at break and high Young’s modulus. A comparison of these results with earlier ones exhibited that the basic additives in the polymer may have an effect on the filler performance.

Fabrication and Characterization of Biocomposite Using Grewia Optiva Fibre (i.e. Bhimal) Reinforced Polyvinyl Alcohol (PVA)

2015 ◽  
Vol 1105 ◽  
pp. 51-55 ◽  
Author(s):  
K.M. Gupta ◽  
Kishor Kalauni
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Natural Fibre ◽  
Fabrication Method ◽  
View Point ◽  
Engineering Material ◽  
Fibre Composites ◽  
Grewia Optiva ◽  
Fabrication And Characterization

Bhimal fibres are quite a newer kind of bio-degradable fibres. They have never been heard before in literatures from the view point of their utility as engineering material. These fibres have been utilized for investigation of their properties. Characterization of this fibre is essential to determine its properties for further use as reinforcing fibre in polymeric, bio-degradable and other kinds of matrix. With this objective, the fabrication method and other mechanical properties of Bhimal-reinforced-PVA biocomposite have been discussed. The stress-strain curves and load-deflection characteristics are obtained. The tensile, compressive, flexure and impact strengths have been calculated. The results are shown in tables and graphs. The results obtained are compared with other existing natural fibre biocomposites. From the observations, it has been concluded that the tensile strength of Bhimal-reinforced-PVA biocomposite is higher than other natural fibre composites. Hence these can be used as reinforcement to produce much lighter weight biocomposites.

Banana Fiber Reinforcement and Application in Composites

2016 ◽  
pp. 201-227 ◽  
Author(s):  
Abhinav Shandilya ◽  
Ayush Gupta ◽  
Deepak Verma
Keyword(s):  
Low Cost ◽  
Agricultural Waste ◽  
Value Added ◽  
Field Research ◽  
Natural Fibre ◽  
Natural Material ◽  
Focus Attention ◽  
Banana Fiber ◽  
Composites Materials ◽  
Fibre Composites

The growing awareness about sustainable development, environmental ecology and new legislations has led researchers to focus attention on bio fibres reinforced composites. In this field research has been done on many fibres but fibres such as banana, coir, bagasse, jute have gained importance in the recent decades. The main advantage of the natural fibre based composites materials being their low cost, easy availability, low density, acceptable specific properties, ease of separation, enhanced energy recovery, C02 neutrality, biodegradability and recyclability in nature. The attention is being given to the development of natural fibre composites is to explore value-added application avenues for their use and also for a sustainable and economical use of easily available natural material in hand. Agricultural waste is a very good example of such naturally available material and it can also be used to prepare composite materials for commercial use this has a very significant advantage over other natural fibres as its abundance and because of almost no cost.

Evaluation of Mechanical Properties of Sugarcane Reinforced Hybrid Natural Fibre Composites by Conventional Fabrication and Finite Element Method

2020 ◽  
Vol 841 ◽  
pp. 327-334
Author(s):  
Dhiwakar S. Ram ◽  
P.N. Bharath Kumar ◽  
R. Sandeep Kumar ◽  
B. Vijaya Ramnath
Keyword(s):  
Mechanical Properties ◽  
Finite Element Method ◽  
Finite Element ◽  
Composite Structures ◽  
Natural Fibre ◽  
Degradable Polymer ◽  
Reinforced Polymer ◽  
Fabrication Errors ◽  
Fibre Composites ◽  
Element Method

Natural Fibre composites are being widely used as a replacement to non-bio-degradable polymer composites. The unavailability of proper processes to treat the natural fibres and the errors in fabrication result in less accurate mechanical properties. The accuracy that is obtained by machine-based processes is not possible in Hand layup method, which is employed in fabrication of natural fibre composites. Finite Element method packages which are specially intended in modelling composite structures give more accurate result of properties than experimental setup, by avoiding fabrication errors. This paper evaluates Impact energy and then the tensile strength, flexural strength of a sugarcane fibre GFRP reinforced polymer matrix both by conventional Hand Layup method and also by Finite Element method.

scholarly journals Effect of reinforcements on polymer matrix bio-composites – an overview

2018 ◽  
Vol 25 (6) ◽  
pp. 1039-1058 ◽  
Author(s):  
Sumit Das Lala ◽  
Ashish B. Deoghare ◽  
Sushovan Chatterjee
Keyword(s):  
Mechanical Properties ◽  
Low Cost ◽  
Natural Fibers ◽  
High Strength ◽  
Low Density ◽  
Intrinsic Properties ◽  
Environment Friendly ◽  
Complex Shapes ◽  
Strength And Durability ◽  
Comprehensive Study

AbstractThe inherent properties of bio-composites such as biodegradability, environment friendly, low cost of production, high strength and durability make them a suitable replacement to traditional materials such as glass and nylon. Bio-polymers are finding wide applications due to their intrinsic properties such as low density, low thermal conductivity, corrosion resistance and ease of manufacturing complex shapes. This paper aims toward a comprehensive study on polymer bio-composites. The review mainly focuses on types of reinforcements such as natural fibers, seed shells, animal fibers, cellulose, bio-polymers, bio-chemicals and bioceramics which enhance the mechanical properties, such as tensile strength, compressive strength, flexural strength, Young’s modulus and creep behavior, of the composites. The pertinent study carried out in this review explores an enormous potentiality of the composites toward a wide variety of applications.

scholarly journals Utilization of SiC and Cu Particles to Enhance Thermal and Mechanical Properties of Al Matrix Composites

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2770 ◽  
Author(s):  
Dongxu Wu ◽  
Congliang Huang ◽  
Yukai Wang ◽  
Yi An ◽  
Chuwen Guo
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
High Thermal Conductivity ◽  
Low Density ◽  
Matrix Composites ◽  
Thermal And Mechanical Properties ◽  
Cu Content ◽  
Sic Particles ◽  
Al Matrix Composites ◽  
Al Matrix

In this work, SiC and Cu particles were utilized to enhance the thermal and mechanical properties of Al matrix composites. The ball-milling and cold-compact methods were applied to prepare Al matrix composites, and the uniform distribution of SiC and Cu particles in the composite confirms the validity of our preparation method. After characterizing the thermal conductivity and the compressibility of the prepared composites, results show that small particles have a higher potential to improve compressibility than large particles, which is attributed to the size effect of elastic modulus. The addition of SiC to the Al matrix will improve the compressibility behavior of Al matrix composites, and the compressibility can be enhanced by 100% when SiC content is increased from 0 to 30%. However, the addition of SiC particles has a negative effect on thermal conductivity because of the low thermal conductivity of SiC particles. The addition of Cu particles to Al-SiC MMCs could further slightly improve the compressibility behavior of Al-SiC/Cu MMCs, while the thermal conductivity could be enhanced by about 100% when the Cu content was increased from 0 to 30%. To meet the need for low density and high thermal conductivity in applications, it is more desirable to enhance the specific thermal conductivity by enlarging the preparation pressure and/or sintering temperature. This work is expected to supply some information for preparing Al matrix composites with low density but high thermal conductivity and high compressibility.

CHLOROHYDRINATION OF NR LATEX BY USING SODIUM HYPOCHLORITE FOR FUEL-RESISTANT MATERIALS

2016 ◽  
Vol 89 (2) ◽  
pp. 251-261 ◽  
Author(s):  
T. Chanroj ◽  
P. Paoprasert
Keyword(s):  
Mechanical Properties ◽  
Sodium Hypochlorite ◽  
Surfactant Concentration ◽  
Raw Materials ◽  
Low Cost ◽  
Scaling Up ◽  
Hydrochloric Acid Concentration ◽  
Thermal And Mechanical Properties ◽  
Simple Method ◽  
Production Processes

ABSTRACT NR is hydrophobic and cannot be used to store, transfer, or make contact with hydrocarbon compounds. We report a simple method to increase the hydrophilicity of NR: a chlorohydrination reaction of NR latex by using sodium hypochlorite is described. It was found that only chlorohydrinated NR was obtained and side products were unnoticeable. The effects of sodium hypochlorite concentration, hydrochloric acid concentration, surfactant concentration, and reaction time on chlorohydrin content in NR were investigated. The swelling resistance of chlorohydrinated NR with 11% chlorohydrin content in diesel and gasohol fuels was improved nearly 3-fold and 4-fold, respectively, compared to that of the unmodified NR. The thermal and mechanical properties of the chlorohydrinated NR were characterized and found to be similar to those of pristine NR, indicating that the chlorohydrinated NR can be an excellent substitute for NR. This method has merits such as low cost of raw materials, easier and greener production processes than traditional methods, and scaling-up possibilities for the fabrication of chlorohydrinated NR for a variety of applications.

Sign in / Sign up

Export Citation Format

Share Document