Food and Health Literacy

2022 ◽  
pp. 208-223
Author(s):  
Helena Alves de Carvalho Sampaio ◽  
Lisidna Almeida Cabral

Food literacy is a sub-field of health literacy with a concept under construction, but corresponds to the ability to read, understand, and judge the quality of information; to seek and exchange knowledge related to the topics of food and nutrition; to buy and prepare food; to critically reflect on factors which influence personal choices about food and understand the impact of these choices on society. In turn, the ACP model is a three-factor communication model (assertiveness, clarity, and positivity) that aims to optimize education based on health literacy. The aim of this chapter is to present a proposal for food guidance which combines the foundations of the ACP model and food literacy for the different life cycles. The guidelines for each cycle were adapted to the ACP model. In conclusion, the ACP model can be applied to food literacy actions in any life cycle. However, it is worth mentioning that the professional's communicational behavior needs to be aligned with the assertiveness competence so that such actions are in fact effective.

2021 ◽  
Vol 13 (10) ◽  
pp. 5726
Author(s):  
Aleksandra Wewer ◽  
Pinar Bilge ◽  
Franz Dietrich

Electromobility is a new approach to the reduction of CO2 emissions and the deceleration of global warming. Its environmental impacts are often compared to traditional mobility solutions based on gasoline or diesel engines. The comparison pertains mostly to the single life cycle of a battery. The impact of multiple life cycles remains an important, and yet unanswered, question. The aim of this paper is to demonstrate advances of 2nd life applications for lithium ion batteries from electric vehicles based on their energy demand. Therefore, it highlights the limitations of a conventional life cycle analysis (LCA) and presents a supplementary method of analysis by providing the design and results of a meta study on the environmental impact of lithium ion batteries. The study focuses on energy demand, and investigates its total impact for different cases considering 2nd life applications such as (C1) material recycling, (C2) repurposing and (C3) reuse. Required reprocessing methods such as remanufacturing of batteries lie at the basis of these 2nd life applications. Batteries are used in their 2nd lives for stationary energy storage (C2, repurpose) and electric vehicles (C3, reuse). The study results confirm that both of these 2nd life applications require less energy than the recycling of batteries at the end of their first life and the production of new batteries. The paper concludes by identifying future research areas in order to generate precise forecasts for 2nd life applications and their industrial dissemination.


2021 ◽  
Vol 13 (5) ◽  
pp. 2525
Author(s):  
Camila López-Eccher ◽  
Elizabeth Garrido-Ramírez ◽  
Iván Franchi-Arzola ◽  
Edmundo Muñoz

The aim of this study is to assess the environmental impacts of household life cycles in Santiago, Chile, by household income level. The assessment considered scenarios associated with environmental policies. The life cycle assessment was cradle-to-grave, and the functional unit considered all the materials and energy required to meet an inhabitant’s needs for one year (1 inh/year). Using SimaPro 9.1 software, the Recipe Midpoint (H) methodology was used. The impact categories selected were global warming, fine particulate matter formation, terrestrial acidification, freshwater eutrophication, freshwater ecotoxicity, mineral resource scarcity, and fossil resource scarcity. The inventory was carried out through the application of 300 household surveys and secondary information. The main environmental sources of households were determined to be food consumption, transport, and electricity. Food consumption is the main source, responsible for 33% of the environmental impacts on global warming, 69% on terrestrial acidification, and 29% on freshwater eutrophication. The second most crucial environmental hotspot is private transport, whose contribution to environmental impact increases as household income rises, while public transport impact increases in the opposite direction. In this sense, both positive and negative environmental effects can be generated by policies. Therefore, life-cycle environmental impacts, the synergy between policies, and households’ socio-economic characteristics must be considered in public policy planning and consumer decisions.


2020 ◽  
Vol 198 ◽  
pp. 03032
Author(s):  
Liying Zhang

Most of the existing studies on the impact of disclosure quality of listed companies on the investment efficiency of enterprises are based on the static level, and the article investigates the evolution of disclosure quality on the investment efficiency of enterprises from the dynamic level by dividing the life cycle of enterprises. Taking the data of Shenzhen civil engineering companies from 2013-2017 as the research sample, it uses multiple regression analysis to empirically test the impact of disclosure quality of listed companies on the investment efficiency of enterprises at different life cycle stages. The results show that when no distinction is made between life cycle stages, high quality disclosure can significantly inhibit the inefficient investment behavior of firms; in the growth and maturity samples, high quality disclosure can significantly inhibit underinvestment and overinvestment; in the recessionary samples, high quality disclosure can significantly inhibit underinvestment and has no significant effect on overinvestment.


Author(s):  
Bożena Kukfisz ◽  
Jakub Rakus ◽  
Robert Piec

The study examined mixtures obtained from ready pyrotechnic articles available on the market in Poland. Samples were taken from various products with different performance characteristics, i.e. pyrotechnic batteries, firecrackers, volcanoes, as well as smoke candles, rockets (including rocket engines), and cold fires. These are the product categories most frequently used by users. The research allowed to determine gaseous combustion products and showed their life cycle in the environment. A comparative analysis of selected pyrotechnic mixtures was carried out in terms of their impact on the climate change of gas products. Using the ICT-Thermodynamic Code program, gaseous combustion products were estimated and the life cycle was analysed using the SimaPro program. Determining the impact on the environment (upon the basis of Ecoindicator 99) allowed to know the scale of the problem and set the direction of development of the pyrotechnic industry, so that importers could compete not only with the price and quality of products offered, but also tried to reduce the potential impact on the environment.


2022 ◽  
pp. 224-237
Author(s):  
José Manuel Feliz ◽  
Marta Barroca

Health literacy depends on communication skills of health professionals. Assertiveness, clarity, and positivity (ACP) are a communication model/technique very useful to improve the patient-health professional relationship, adherence to treatment, health literacy, and quality of life. This model can be used in medication reconciliation (MR) – the identification of the most precise list of medication that a patient has been taking and should take, which requires a multidisciplinary participation and a better communication between health professionals and between them and the patient. When the guidance from healthcare professionals is clear and effective, patients and caregivers are more compliant to the recommended drug regimen, resulting in better health outcomes.


Author(s):  
Cristina Vaz de Almeida ◽  
Célia Belim

This article proposes a three-factor model of communication competencies inspired in literature review and evaluated and completed by Portuguese health specialists with expertise on health literacy, who were organized into four focus groups (n=25). The study includes a response to the lack of consensus in the literature as to what specific and operative competencies the health professional should perform in clinical encounters with the patients. All the participants in the focus group agreed and reinforced that an aggregated and interdependent model, which is composed of assertiveness, clarity of language, and positivity (ACP model), can be an effective health communication model.


2020 ◽  
Vol 12 (5) ◽  
pp. 825 ◽  
Author(s):  
Christos Stathopoulos ◽  
Platon Patlakas ◽  
Christos Tsalis ◽  
George Kallos

Air–sea interface processes are highly associated with the evolution and intensity of marine-developed storms. Specifically, in the Mediterranean Sea, the air–ocean temperature deviations have a profound role during the several stages of Mediterranean cyclonic events. Subsequently, this enhances the need for better knowledge and representation of the sea surface temperature (SST). In this work, an analysis of the impact and uncertainty of the SST from different well-known datasets on the life-cycle of Mediterranean cyclones is attempted. Daily SST from the Real Time Global SST (RTG_SST) and hourly SST fields from the Operational SST and Sea Ice Ocean Analysis (OSTIA) and the NEMO ocean circulation model are implemented in the RAMS/ICLAMS-WAM coupled modeling system. For the needs of the study, the Mediterranean cyclones Trixi, Numa, and Zorbas were selected. Numerical experiments covered all stages of their life-cycles (five to seven days). Model results have been analyzed in terms of storm tracks and intensities, cyclonic structural characteristics, and derived heat fluxes. Remote sensing data from the Integrated Multi-satellitE Retrievals (IMERG) for Global Precipitation Measurements (GPM), Blended Sea Winds, and JASON altimetry missions were employed for a qualitative and quantitative comparison of modeled results in precipitation, maximum surface wind speed, and wave height. Spatiotemporal deviations in the SST forcing rather than significant differences in the maximum/minimum SST values, seem to mainly contribute to the differences between the model results. Considerable deviations emerged in the resulting heat fluxes, while the most important differences were found in precipitation exhibiting spatial and intensity variations reaching 100 mm. The employment of widely used products is shown to result in different outcomes and this point should be taken into consideration in forecasting and early warning systems.


2017 ◽  
Vol 20 (13) ◽  
pp. 2406-2415 ◽  
Author(s):  
Elsie Azevedo Perry ◽  
Heather Thomas ◽  
H Ruby Samra ◽  
Shannon Edmonstone ◽  
Lyndsay Davidson ◽  
...  

AbstractObjectiveAn absence of food literacy measurement tools makes it challenging for nutrition practitioners to assess the impact of food literacy on healthy diets and to evaluate the outcomes of food literacy interventions. The objective of the present scoping review was to identify the attributes of food literacy.DesignA scoping review of peer-reviewed and grey literature was conducted and attributes of food literacy identified. Subjects included in the search were high-risk groups. Eligible articles were limited to research from Canada, USA, the UK, Australia and New Zealand.ResultsThe search identified nineteen peer-reviewed and thirty grey literature sources. Fifteen identified food literacy attributes were organized into five categories. Food and Nutrition Knowledge informs decisions about intake and distinguishing between ‘healthy’ and ‘unhealthy’ foods. Food Skills focuses on techniques of food purchasing, preparation, handling and storage. Self-Efficacy and Confidence represent one’s capacity to perform successfully in specific situations. Ecologic refers to beyond self and the interaction of macro- and microsystems with food decisions and behaviours. Food Decisions reflects the application of knowledge, information and skills to make food choices. These interdependent attributes are depicted in a proposed conceptual model.ConclusionsThe lack of evaluated tools inhibits the ability to assess and monitor food literacy; tailor, target and evaluate programmes; identify gaps in programming; engage in advocacy; and allocate resources. The present scoping review provides the foundation for the development of a food literacy measurement tool to address these gaps.


2017 ◽  
Vol 38 (5) ◽  
pp. 639-655 ◽  
Author(s):  
Kelly M. Smith ◽  
Kali S. Thomas ◽  
Shanthi Johnson ◽  
Hongdao Meng ◽  
Kathryn Hyer

Objective: To examine the relationship between dietary service staff and dietary deficiency citations in nursing homes (NHs). Method: 2007-2011 Online Survey and Certification and Reporting data for 14,881 freestanding NHs were used to examine the relationship between dietary service staff and the probability of receiving a dietary service–related deficiency citation. An unconditional logit model with random effects was employed. Results: Findings suggest that higher staffing levels for dietitians (odds ratio [OR] = .955; p < .01), dietary service personnel (OR = .996; p < .01), and certified nursing assistants (CNAs; OR = .981; p < .05) decrease the likelihood of receiving a dietary service deficiency citation. Conclusion: Higher levels of dietary service and CNA staffing levels have the potential to improve the quality of nutritional care in NHs. Findings help substantiate the Centers for Medicare and Medicaid Services’ proposed rules for more stringent Food and Nutrition Services in the NH setting and signify the need for further research relative to the impact of dietary service staff on nutritional and clinical outcomes.


Author(s):  
Alina Martynenko

In the conditions of accelerated scientific and technological progress and social development, products can lose consumer value and, therefore, be ousted from the consumer market by other goods with a higher consumer value. In this regard, the importance of predicting product life cycles and their effectiveness is increasing. The aim of the article is to study the issue of forecasting the efficiency of electrical products taking into account the stages of their life cycle by constructing a multifactor regression model. The method of correlation-regression analysis was used to build a forecast model and determine the most influential factors for a particular motor, which determined the relationship between the comprehensive indicator and individual indicators of product efficiency. Thus, the article investigated the issue of forecasting the efficiency of electrical products taking into account the stages of their life cycle. On the example of the electric motor AIR 80 PJSC «Kharkiv Electrotechnical Plant «Ukrelectromash»» a multifactor regression model for the stage of decline is built, which includes the most important indicators of the impact on the comprehensive indicator of efficiency and allows to predict its dynamics.


Sign in / Sign up

Export Citation Format

Share Document