EHA System Integration Design Analysis and Position Tracking Performance by PID Controller

2013 ◽  
Vol 419 ◽  
pp. 826-834
Author(s):  
Syed Imran Jawaid ◽  
Liang Wang
Keyword(s):  
Dynamic Analysis ◽  
System Integration ◽  
Pid Controller ◽  
High Performance ◽  
Aerospace Industry ◽  
Important Application ◽  
Tracking Performance ◽  
Position Tracking ◽  
Simulation Results ◽  
Almost All

Electro-hydraulic actuation is now an emerging and well established technology and currently applicable in almost all fields but most important application of electro-hydrostatic actuator (EHA) is aerospace industry. This paper will discuss the selection and designing of major sub-assemblies and their integration to form an EHA unit. A complete, compact, and high performance EHA will be designed in different sections of paper and dynamic analysis of major assemblies is carried out to meet the designed requirements. In last section position tracking performance of the EHA is analysed by using a conventional PID Controller and simulation results are discussed.

scholarly journals Position Tracking of ML System using CSA Based PID Controller

2019 ◽  
Vol 8 (11) ◽  
pp. 1956-1959
Keyword(s):  
Pid Controller ◽  
Magnetic Levitation ◽  
Search Algorithm ◽  
Cuckoo Search ◽  
Cuckoo Search Algorithm ◽  
Pid Controllers ◽  
Position Tracking ◽  
Proportional Integral Derivative ◽  
Proportional Integral ◽  
Simulation Results

The classical proportional integral derivative (PID) controllers are still use in various applications in industry. Magnetic levitation (ML) systems are rigidly nonlinear and sometimes unstable systems. Due to inbuilt nonlinearities of ML systems, tracking of position of ML Systems is still difficult. For the tracking purpose of position, PID controller parameters are found by choosing Cuckoo Search Algorithm (CSA) of optimization. The ranges of parameters are customized by z-n method of parameters. Simulation results show the tracking of position of ML systems using conventional and optimized parameters obtained with the CSA based controller.

scholarly journals Position Tracking Performance with Fine Tune Ziegler-Nichols PID Controller for Electro-Hydraulic Actuator in Aerospace Vehicle Model

2021 ◽  
Vol 2107 (1) ◽  
pp. 012064
Author(s):  
S.M. Othman ◽  
Noorhazirah Sunar ◽  
Hassrizal H.B ◽  
A.H. Ismail ◽  
M.N. Ayob ◽  
...  
Keyword(s):  
Pid Controller ◽  
External Disturbance ◽  
Viscous Friction ◽  
Fine Tuning ◽  
Tracking Performance ◽  
Position Tracking ◽  
Trial And Error ◽  
Hydraulic Actuator ◽  
Tuning Method ◽  
Non Linear System

Abstract Electro-Hydraulic Actuator (EHA) system is a third order non-linear system which is highly suffer from system uncertainties such as Coulomb friction, viscous friction and pump leakage coefficient which makes this system more complicated for the designing of the controller. The Proportional-Integral-Derivative (PID) controller has proposed in this paper to control EHA system and main problem in its application is to tune the parameter to its optimum value. Two different methods are used to tune the PID controller which are trial and error and Ziegler-Nichols method. MATLAB Simulink is used to simulate the system. In order to determine the performance of EHA system for the position tracking. 3 different of external disturbance such as 0N, 5000N and 10000N has been injected into the system. Simulation results show that the Ziegler-Nichols fine tuning method provides the better tracking performance when compared to the trial and error method for every specific disturbance setting. The Ziegler Nichols method provides better disturbance rejection as the performances indexes such as percentage overshoot, settling time and steady state error are not affected by the varying of disturbance.

Vacuum System to Minimize the Specimen Contamination of High-Performance EM

1977 ◽  
Vol 35 ◽  
pp. 68-69
Author(s):  
N. Yoshimura ◽  
K. Shirota ◽  
T. Etoh
Keyword(s):  
Electron Microscope ◽  
High Speed ◽  
High Performance ◽  
High Vacuum ◽  
Vacuum System ◽  
Pump System ◽  
Pumping System ◽  
Diffusion Pump ◽  
Almost All ◽  
Cascade Type

One of the most important requirements for a high-performance EM, especially an analytical EM using a fine beam probe, is to prevent specimen contamination by providing a clean high vacuum in the vicinity of the specimen. However, in almost all commercial EMs, the pressure in the vicinity of the specimen under observation is usually more than ten times higher than the pressure measured at the punping line. The EM column inevitably requires the use of greased Viton O-rings for fine movement, and specimens and films need to be exchanged frequently and several attachments may also be exchanged. For these reasons, a high speed pumping system, as well as a clean vacuum system, is now required. A newly developed electron microscope, the JEM-100CX features clean high vacuum in the vicinity of the specimen, realized by the use of a CASCADE type diffusion pump system which has been essentially improved over its predeces- sorD employed on the JEM-100C.

scholarly journals Active Disturbance Rejection Control for Position Tracking of Electro-Hydraulic Servo Systems under Modeling Uncertainty and External Load

Actuators ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 20
Author(s):  
Manh Hung Nguyen ◽  
Hoang Vu Dao ◽  
Kyoung Kwan Ahn
Keyword(s):  
Angular Velocity ◽  
Disturbance Rejection ◽  
Lyapunov Theory ◽  
Tracking Performance ◽  
System Stability ◽  
Position Tracking ◽  
Parametric Uncertainties ◽  
Active Disturbance Rejection Control ◽  
Active Disturbance Rejection ◽  
Disturbance Rejection Control

In this paper, an active disturbance rejection control is designed to improve the position tracking performance of an electro-hydraulic actuation system in the presence of parametric uncertainties, non-parametric uncertainties, and external disturbances as well. The disturbance observers (Dos) are proposed to estimate not only the matched lumped uncertainties but also mismatched disturbance. Without the velocity measurement, the unmeasurable angular velocity is robustly calculated based on the high-order Levant’s exact differentiator. These disturbances and angular velocity are integrated into the control design system based on the backstepping framework which guarantees high-accuracy tracking performance. The system stability analysis is analyzed by using the Lyapunov theory. Simulations based on an electro-hydraulic rotary actuator are conducted to verify the effectiveness of the proposed control method.

scholarly journals High-Performance Ultra-Thin Spectrometer Optical Design Based on Coddington’s Equations

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 323
Author(s):  
Zhiwei Feng ◽  
Guo Xia ◽  
Rongsheng Lu ◽  
Xiaobo Cai ◽  
Hao Cui ◽  
...  
Keyword(s):  
High Resolution ◽  
Spectral Resolution ◽  
High Performance ◽  
Optical Design ◽  
Pixel Size ◽  
Simulation Design ◽  
Central Wavelength ◽  
Spot Radius ◽  
Unique Method ◽  
Almost All

A unique method to design a high-throughput and high-resolution ultrathin Czerny–Turner (UTCT) spectrometer is proposed. This paper reveals an infrequent design process of spectrometers based on Coddington’s equations, which will lead us to develop a high-performance spectrometer from scratch. The spectrometer is composed of cylindrical elements except a planar grating. In the simulation design, spot radius is sub-pixel size, which means that almost all of the energy is collected by the detector. The spectral resolution is 0.4 nm at central wavelength and 0.75 nm at edge wavelength when the width of slit is chosen to be 25 μm and the groove density is 900 lines/mm.

scholarly journals Direct coherent multi-ink printing of fabric supercapacitors

2021 ◽  
Vol 7 (3) ◽  
pp. eabd6978 ◽  
Author(s):  
Jingxin Zhao ◽  
Hongyu Lu ◽  
Yan Zhang ◽  
Shixiong Yu ◽  
Oleksandr I. Malyi ◽  
...  
Keyword(s):  
System Integration ◽  
High Performance ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
High Mass ◽  
Wearable Electronics ◽  
Energy Storage Devices ◽  
Fabrication Procedure ◽  
Self Powered ◽  
Mechanical Devices

Coaxial fiber-shaped supercapacitors with short charge carrier diffusion paths are highly desirable as high-performance energy storage devices for wearable electronics. However, the traditional approaches based on the multistep fabrication processes for constructing the fiber-shaped energy device still encounter persistent restrictions in fabrication procedure, scalability, and mechanical durability. To overcome this critical challenge, an all-in-one coaxial fiber-shaped asymmetric supercapacitor (FASC) device is realized by a direct coherent multi-ink writing three-dimensional printing technology via designing the internal structure of the coaxial needles and regulating the rheological property and the feed rates of the multi-ink. Benefitting from the compact coaxial structure, the FASC device delivers a superior areal energy/power density at a high mass loading, and outstanding mechanical stability. As a conceptual exhibition for system integration, the FASC device is integrated with mechanical units and pressure sensor to realize high-performance self-powered mechanical devices and monitoring systems, respectively.

scholarly journals 3D Simulation-Based Acoustic Wave Resonator Analysis and Validation Using Novel Finite Element Method Software

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2715
Author(s):  
Ruth Yadira Vidana Morales ◽  
Susana Ortega Cisneros ◽  
Jose Rodrigo Camacho Perez ◽  
Federico Sandoval Ibarra ◽  
Ricardo Casas Carrillo
Keyword(s):  
Finite Element ◽  
High Performance ◽  
Cloud Services ◽  
3D Simulation ◽  
3D Simulations ◽  
Acoustic Resonators ◽  
Analysis And Design ◽  
Wave Resonator ◽  
Film Bulk ◽  
Simulation Results

This work illustrates the analysis of Film Bulk Acoustic Resonators (FBAR) using 3D Finite Element (FEM) simulations with the software OnScale in order to predict and improve resonator performance and quality before manufacturing. This kind of analysis minimizes manufacturing cycles by reducing design time with 3D simulations running on High-Performance Computing (HPC) cloud services. It also enables the identification of manufacturing effects on device performance. The simulation results are compared and validated with a manufactured FBAR device, previously reported, to further highlight the usefulness and advantages of the 3D simulations-based design process. In the 3D simulation results, some analysis challenges, like boundary condition definitions, mesh tuning, loss source tracing, and device quality estimations, were studied. Hence, it is possible to highlight that modern FEM solvers, like OnScale enable unprecedented FBAR analysis and design optimization.

Composite adaptive control based on historical data for electro-hydraulic system driven by dual servo motor-pump with unknown disturbance

2021 ◽  
pp. 095965182199860
Author(s):  
Xiaofu Zhang ◽  
Guanglin Shi
Keyword(s):  
Adaptive Control ◽  
Hydraulic System ◽  
Historical Data ◽  
Tracking Performance ◽  
Load Force ◽  
Position Tracking ◽  
Servo Motor ◽  
Estimated Parameters ◽  
Unknown Disturbance ◽  
Composite Adaptive Control

This article presents a composite adaptive control method to improve the position-tracking performance of an electro-hydraulic system driven by dual constant displacement pump and dual servo motor named as a novel electro-hydraulic system with unknown disturbance. A composite adaptive controller based on backstepping method is designed to estimate the uncertainties of electro-hydraulic control system, including the damping coefficient and elastic modulus. In order to release the persistent excitation condition of conventional adaptive control, which is often infeasible in practice, a prediction error based on the online historical data is used to update the estimated parameters. Furthermore, a disturbance observer is used to estimate the disturbance including the unmeasurable load force, friction and other unmodeled disturbance. The experiment results are provided and compared with other methods to verify the effectiveness of the proposed method, and the results have indicated that the proposed method has a better position-tracking performance with the convergent estimated parameters.

scholarly journals Optimization of Dynamic Task Location within a Manipulator’s Workspace for the Utilization of the Minimum Required Joint Torques

Electronics ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 288
Author(s):  
Adam Wolniakowski ◽  
Charalampos Valsamos ◽  
Kanstantsin Miatliuk ◽  
Vassilis Moulianitis ◽  
Nikos Aspragathos
Keyword(s):  
High Performance ◽  
Human Robot Interaction ◽  
Optimal Position ◽  
End Effector ◽  
Joint Torques ◽  
Dynamic Task ◽  
Arbitrary Position ◽  
Simulation Results ◽  
Set Up ◽  
Task Placement

The determination of the optimal position of a robotic task within a manipulator’s workspace is crucial for the manipulator to achieve high performance regarding selected aspects of its operation. In this paper, a method for determining the optimal task placement for a serial manipulator is presented, so that the required joint torques are minimized. The task considered comprises the exercise of a given force in a given direction along a 3D path followed by the end effector. Given that many such tasks are usually conducted by human workers and as such the utilized trajectories are quite complex to model, a Human Robot Interaction (HRI) approach was chosen to define the task, where the robot is taught the task trajectory by a human operator. Furthermore, the presented method considers the singular free paths of the manipulator’s end-effector motion in the configuration space. Simulation results are utilized to set up a physical execution of the task in the optimal derived position within a UR-3 manipulator’s workspace. For reference the task is also placed at an arbitrary “bad” location in order to validate the simulation results. Experimental results verify that the positioning of the task at the optimal location derived by the presented method allows for the task execution with minimum joint torques as opposed to the arbitrary position.

Sign in / Sign up

Export Citation Format

Share Document