Study on the Photocatalyst Degradation of Methylene Blue by Using Nanometer-Sized TiO2/Quartz Sand

2011 ◽  
Vol 183-185 ◽  
pp. 1803-1806 ◽  
Author(s):  
Song Han ◽  
Jin Bing Sun ◽  
Wei Xiang ◽  
Si Yao Guo ◽  
Feng Lu Wang ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Methylene Blue ◽  
Quartz Sand ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Xenon Lamp ◽  
X Ray Diffraction ◽  
X Ray ◽  
Composite Samples ◽  
Scanning Electron

In this research, the nanometer-sized TiO2/quartz sand photocatalyst was prepared by sol-gel method. The structure of the composite samples was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). And the photocatalytic degradation for the methylene blue (MB) solution have been inverstigated in visible light. The influence of calcining temperature was discussed. The result showed: heat treatment of the material loaded on quartz sand at 400 °C was most effective. The decolorization rate of methylene blue (MB) can be reached 96.92% under 4.5 h xenon lamp irradiation.

Preparation and Characterization of N Doped TiO2/ Sepiolite Composite Materials

2011 ◽  
Vol 284-286 ◽  
pp. 597-600
Author(s):  
Dai Mei Chen ◽  
Hai Peng Ji ◽  
Jian Xin Wang ◽  
Jian Chen ◽  
Xin Long Luan ◽  
...  
Keyword(s):  
Composite Materials ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nitrogen Doped ◽  
Nitrogen Contents ◽  
Scanning Electron ◽  
Oxygen Atoms

Nitrogen doped TiO2/sepiolite composite materials (N-TiO2/sep) with different nitrogen contents were prepared by a sol-gel method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), respectively. XRD and SEM results showed that anatase-TiO2nanoparticles were distributed homogenously on the surface of sepiolite. XPS revealed that N atoms could incorporate into the lattice of anatase TiO2substituting the oxygen atoms sites of oxygen atoms.

Preparation of TiO2/CNT Composites and Effect of CNT's Structure on Morphology of Nano-TiO2

2013 ◽  
Vol 750-752 ◽  
pp. 259-264
Author(s):  
Feng Li ◽  
He Bian ◽  
Hui Zhang
Keyword(s):  
Heat Treatment ◽  
Carbon Fiber ◽  
Sol Gel ◽  
Fiber Composites ◽  
Carbon Fiber Composites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Morphology And Structure ◽  
Scanning Electron

Four kinds of TiO2/CNT (or carbon fiber) composites were successfully prepared by the sol-gel method using Ti(OBu)4 as precursor of TiO2, and untreated CNT, carboxylic CNT, hydroxylated CNT and carbon fiber were used as carriers, respectively. After heat treatment at 400 and 800°C, TiO2/CNT nanocomposites and purified TiO2 were obtained. Their structure and morphology were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The results indicate that different carbon nanotubes and nanofiber have notable influences on the morphology and structure of TiO2 nanocrystals.

scholarly journals Synthesis, photocatalytic and antidiabetic properties of ZnO/PVA nanoparticles

2021 ◽  
Author(s):  
shady M. El Dafrawy ◽  
Mahmoud Tarek ◽  
Salem Samra ◽  
Shawky M. Hassan
Keyword(s):  
Methylene Blue ◽  
Biological Activity ◽  
Electron Microscope ◽  
Methyl Orange ◽  
Sol Gel ◽  
Diabetic Rats ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Scanning Electron

Abstract We prepared a series of ZnO and ZnO/PVA catalysts by sol-gel method. The wurtzite ZnO phase was confirmed by X-ray diffraction analysis (XRD). Forming spherical shaped ZnO and ZnO/PVA nanoparticles was proved by Scanning electron microscope (SEM) images. Decomposition of Methylene Blue (MB) and methyl orange (MO) by synthesized pure ZnO and ZnO/PVA nanoparticles were studied in the UV–Vis region. ZnO/5PVA was the most active in decomposition of MB, while ZnO/7PVA was the most active in decomposition of MO. By studying biological activity of pure ZnO and ZnO/PVA in diabetic rats shows that ZnO/5PVA was the most active in lowering glucose level by different percentages.

Discussion the Influence of Nonmetal Doped TiO2

2011 ◽  
Vol 287-290 ◽  
pp. 1771-1774 ◽  
Author(s):  
Song Han ◽  
Si Yao Guo ◽  
Wei Xiang ◽  
Hui Wang ◽  
Lin Yang ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Molar Ratio ◽  
Xenon Lamp ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Past ◽  
The World ◽  
Intense Research ◽  
Scanning Electron

With the development of the science and technology, environmental pollution becomes one of the most serious problems all over the world. TiO2 has gained intense research in the past decades due to its applications in environmental purification and solar energy conversion. In this paper, we discuss the influence of nonmetal (N, P, S) doped TiO2 were prepared by hydrothermal method, the samples are characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of them was evaluated for the degradation of methylene blue under xenon lamp which has similar spectra to solar light. The results domenstrated that the N, P-codoped TiO2 powders exhibited a better photocatalytic activity, and the optimum molar ratio is also investigated.

Sol-Gel AL2O3 Coatings on SiC Fiber

1991 ◽  
Vol 249 ◽  
Author(s):  
Youming Xiao ◽  
Beng Jit Tan ◽  
Steven L. Suib ◽  
Francis S. Galasso
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Electron Spectroscopy ◽  
Auger Electron ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sic Fiber ◽  
Sol Gel Process ◽  
Scanning Electron

ABSTRACTCoating of SiC (BP-SIGMA) fibers with alumina by a sol-gel process did not cause degradation even after heating to 1000°C in air for 24 h. X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Auger electron spectroscopy (AES) and scanning electron microscopy (SEM ) methods were used to study the coating fiber interface.

PENGGUNAAN TiO2 PARTIKEL NANO HASIL SINTESIS BERBASIS AIR MENGGUNAKAN METODA SOL-GEL PADA BAHAN KAPAS SEBAGAI APLIKASI UNTUK TEKSTIL ANTI UV

Arena Tekstil ◽  
2013 ◽  
Vol 28 (1) ◽  
Author(s):  
Maya Komalasari ◽  
Bambang Sunendar
Keyword(s):  
Fourier Transform ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Sol Gel ◽  
Crosslinking Agent ◽  
X Ray Diffraction ◽  
Nano Tio2 ◽  
X Ray ◽  
Infra Red ◽  
Scanning Electron

Partikel nano TiO2 berbasis air dengan pH basa telah berhasil disintesis dengan menggunakan metode sol-gel dan diimobilisasi pada kain kapas dengan menggunakan kitosan sebagai zat pengikat silang. Sintesis dilakukan  dengan prekursor TiCl4 pada konsentrasi 0,3 M, 0,5 M dan 1 M, dan menggunakan templat kanji dengan proses kalsinasi pada suhu 500˚C selama 2 jam. Partikel nano TiO2 diaplikasikan ke kain kapas dengan metoda pad-dry-cure dan menggunakan kitosan sebagai crosslinking agent. Berdasarkan hasil Scanning Electron Microscope (SEM),diketahui bahwa morfologi partikel TiO2 berbentuk spherical dengan ukuran nano (kurang dari 100 nm). Karakterisasi X-Ray Diffraction (XRD) menunjukkan adanya tiga tipe struktur kristal utama, yaitu (100), (101) dan (102) dengan fasa kristal yang terbentuk adalah anatase dan rutile. Pada karakterisasi menggunakan SEM terhadap serbuk dari TiO2 yang telah diaplikasikan ke permukaan kain kapas, terlihat adanya imobilisasi partikel nano TiO2 melalui ikatan hidrogen silang dengan kitosan pada kain kapas. Hasil analisa tersebut kemudian dikonfirmasi dengan FTIR (Fourier Transform Infra Red) yang hasilnya memperlihatkan puncak serapan pada bilangan gelombang 3495 cm-1, 2546 cm-1, dan 511 cm-1,  yang masing-masing diasumsikan sebagai adanya vibrasi gugus fungsi O-H, N-H dan Ti-O-Ti. Hasil SEM menunjukkan pula bahwa kristal nano yang terbentuk diantaranya adalah fasa rutile , yang berdasarkan literatur terbukti dapatberfungsi sebagai anti UV.

scholarly journals Synthesis of Magnetic Ferrocene-Containing Polymer with Photothermal Effects for Rapid Degradation of Methylene Blue

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 558
Author(s):  
Wenhui Zhu ◽  
Caiyun Zhang ◽  
Yali Chen ◽  
Qiliang Deng
Keyword(s):  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Degradation Rate ◽  
Model Compound ◽  
Vibrating Sample Magnetometer ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

Photothermal materials are attracting more and more attention. In this research, we synthesized a ferrocene-containing polymer with magnetism and photothermal properties. The resulting polymer was characterized by Fourier-transform infrared (FT-IR), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Its photo-thermocatalytic activity was investigated by choosing methylene blue (MB) as a model compound. The degradation percent of MB under an irradiated 808 nm laser reaches 99.5% within 15 min, and the degradation rate is 0.5517 min−1, which is 145 times more than that of room temperature degradation. Under irradiation with simulated sunlight, the degradation rate is 0.0092 min−1, which is approximately 2.5 times more than that of room temperature degradation. The present study may open up a feasible route to degrade organic pollutants.

ROOM TEMPERATURE PHOTOLUMINESCENCE OF POLYCRYSTALLINE SIC PREPARED FROM CARBON-SATURATED SI MELT

2002 ◽  
Vol 16 (06n07) ◽  
pp. 1047-1051
Author(s):  
JIANPING MA ◽  
ZHIMING CHEN ◽  
GANG LU ◽  
MINGBIN YU ◽  
LIANMAO HANG ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Uv Light ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Composition And Structure ◽  
Light Excitation ◽  
Scanning Electron

Intense photoluminescence (PL) has been observed at room temperature from the polycrystalline SiC samples prepared from carbon-saturated Si melt at a temperature ranging from 1500 to 1650°C. Composition and structure of the samples have been confirmed by means of X-ray photoelectron spectroscopy, X-ray diffraction and scanning electron microscopy. PL measurements with 325 nm UV light excitation revealed that the room temperature PL spectrum of the samples consists of 3 luminescent bands, the peak energies of which are 2.38 eV, 2.77 eV and 3.06 eV, respectively. The 2.38 eV band is much stronger than the others. It is suggested that some extrinsic PL mechanisms associated with defect or interface states would be responsible to the intensive PL observed at room temperature.

scholarly journals Decolorization of Methylene Blue by Ag/SrSnO3 Composites under Ultraviolet Radiation

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Patcharanan Junploy ◽  
Titipun Thongtem ◽  
Somchai Thongtem ◽  
Anukorn Phuruangrat
Keyword(s):  
Electron Microscopy ◽  
Methylene Blue ◽  
Uv Radiation ◽  
Photoelectron Spectroscopy ◽  
Separation Process ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
X Ray ◽  
Negative Effect ◽  
Uv Visible

SrSn(OH)6 precursors synthesized by a cyclic microwave radiation (CMR) process were calcined at 900°C for 3 h to form rod-like SrSnO3. Further, the rod-like SrSnO3 and AgNO3 in ethylene glycol (EG) were ultrasonically vibrated to form rod-like Ag/SrSnO3 composites, characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), electron microscopy (EM), Fourier transform infrared (FTIR) spectroscopy, and UV-visible analysis. The photocatalyses of rod-like SrSnO3, 1 wt%, 5 wt%, and 10 wt% Ag/SrSnO3 composites were studied for degradation of methylene blue (MB, C16H18N3SCl) dye under ultraviolet (UV) radiation. In this research, the 5 wt% Ag/SrSnO3 composites showed the highest activity, enhanced by the electron-hole separation process. The photoactivity became lower by the excessive Ag nanoparticles due to the negative effect caused by reduction in the absorption of UV radiation.

Magnetic Properties of Bulk Zn0.95-XMnXFe0.05O2 Prepared by Sol-Gel Method and Subsequent Hot Pressing

2011 ◽  
Vol 268-270 ◽  
pp. 356-359 ◽  
Author(s):  
Wen Song Lin ◽  
C. H. Wen ◽  
Liang He
Keyword(s):  
Magnetic Properties ◽  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
Sol Gel ◽  
Secondary Phase ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Doped Zno

Mn, Fe doped ZnO powders (Zn0.95-xMnxFe0.05O2, x≤0.05) were synthesized by an ameliorated sol-gel method, using Zn(CH3COO)2, Mn(CH3COO)2and FeCl2as the raw materials, with the addition of vitamin C as a kind of chemical reducer. The resulting powder was subsequently compacted under pressure of 10 MPa at the temperature of 873K in vacuum. The crystal structure and magnetic properties of Zn0.95-xMnxFe0.05O2powder and bulk samples have been investigated by X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). X-ray photoelectron spectroscopy (XPS) was used to study chemical valence of manganese, iron and zinc in the samples. The x-ray diffraction (XRD) results showed that Zn0.95-xMnxFe0.05O (x≤0.05) samples were single phase with the ZnO-like wurtzite structure. No secondary phase was found in the XRD spectrum. X-ray photoelectron spectroscopy (XPS) showed that Fe and Mn existed in Zn0.95-xMnxFe0.05O2samples in Fe2+and Mn2+states. The results of VSM experiment proved the room temperature ferromagnetic properties (RTFP) of Mn, Fe co-doped ZnO samples.

Sign in / Sign up

Export Citation Format

Share Document