The Study of Kraft Continuous Cooking of Knenaf

2011 ◽  
Vol 236-238 ◽  
pp. 1212-1215 ◽  
Author(s):  
Dong Mei Yu ◽  
Ke Fu Chen ◽  
Chuan Shan Zhao ◽  
Jun Xu
Keyword(s):  
Raw Material ◽  
High Yield ◽  
Chemical Components ◽  
Fiber Morphology ◽  
Bast Fiber ◽  
The Core ◽  
Hardwood Pulp ◽  
Cooking Conditions

The paper studied the possibility of using the whole stalk kenaf as a raw material for producing high yield and good quality bleachable pulp. The stem of kenaf has two distinct parts: the bast and the core. which have markedly different chemical components and fiber morphology. In general, the length of bast fiber ranges from about 2-2.5mm, while that of the core varies from about 0.5-0.8mm, so it is important to achieve a balance of the bast fiber and the core during pulping. The study indicated that using the selected continuous cooking conditions, the properties of kenaf pulp approached to the hardwood pulp and would be easily bleached.

scholarly journals Potensi Penggunaan Dua Spesies Agave untuk Pembuatan Pulp dan Kertas

2018 ◽  
Vol 8 (01) ◽  
pp. 43
Author(s):  
Arini Hidayati Jamil ◽  
Heronimus Judi Tjahjono ◽  
Parnidi Parnidi ◽  
Marjani Marjani
Keyword(s):  
Physical Properties ◽  
Pulp And Paper ◽  
Raw Material ◽  
National Standard ◽  
Chemical Components ◽  
Pulp Yield ◽  
Fiber Morphology ◽  
Tensile Index ◽  
Tear Index ◽  
Agave Sisalana

Potential of Two Agave Species for Pulp and Paper MakingAbstractBoth of Agave sisalana and A. cantala are the most favorite agave species for fiber producer plant in Indonesia. Nevertheless, research study for using fiber of A. sisalana and A. cantala for pulp and paper purpose is hard to find. This study aims to observe the characteristics of A. sisalana and A. cantala fibers as a raw material of pulp including fiber morphology, chemical components, pulp characteristics, optical and physical properties of the handsheets. The observation of all characters was based on Indonesian National Standard (SNI). The pulping method used both of soda process with 18% active alkali and kraft process with 18% active alkali and 25% sulfidity. The result of the study for the handsheets from A. sisalana and A. cantala fibers shows that the brightness, dirt, and tear index were fulfilled to SNI standard for NBKP while the tensile index and burst index just fulfilled to SNI standard for LBKP. The handsheet of A. sisalana fiber has a higher tear index, tensile index, and burst index than the A. cantala ones. Soda pulping of both agave species resulting higher pulp yield, cellulose polymerization degrees and physical properties than kraft pulping.Keywords : Agave sisalana, A. cantala, characteristics of the fiber, pulp AbstrakAgave sisalana dan A. cantala merupakan dua spesies agave yang paling banyak dibudidayakan di Indonesia sebagai tanaman penghasil serat alam. Namun penelitian mengenai fungsi serat A. sisalana dan A. cantala sebagai bahan baku pulp dan kertas masih sulit ditemukan. Tujuan dari penelitian ini adalah mempelajari karakteristik serat A. sisalana dan A. cantala sebagai bahan baku pulp yang meliputi morfologi serat, komposisi komponen kimia, karakeristik pulp, sifat optik dan fisik lembaran pulp yang dihasilkan. Pengamatan seluruh karakter dilakukan berdasarkan Standar Nasional Indonesia. Pemasakan menggunakan metode soda dengan alkali aktif 18% dan kraft dengan alkali aktif 18% dan sulfiditas 25%. Hasil pengamatan pada lembaran pulp yang dihasilkan dari serat A. sisalana dan A. cantala menunjukkan bahwa derajat cerah, noda, dan kekuatan sobek memenuhi Standar Nasional Indonesia (SNI) Pulp Kraft Putih Kayujarum (NBKP) sementara kekuatan tarik dan kekuatan retak memenuhi SNI Pulp Krat Putih Kayudaun (LBKP). Lembaran pulp A. sisalana memiliki kekuatan sobek, tarik, dan retak lebih tinggi dibanding lembaran pulp A. cantala. Metode pemasakan soda pada serat kedua spesies agave tersebut menghasilkan rendemen pulp, derajat polimerisasi selulosa, dan kekuatan fisik lebih baik dibanding metode kraft.Kata kunci : Agave sisalana, A. cantala, karakteristik serat, pulp 

scholarly journals HUBUNGAN SPECIFIC GRAVITY KAYUDAUN TERHADAP SERAT DAN KUALITAS PULP (THE RELATIONSHIP OF HARDWOOD SPECIFIC GRAVITY TO FIBER AND PULP QUALITY)

2017 ◽  
Vol 7 (02) ◽  
pp. 59
Author(s):  
Wawan Kartiwa Haroen
Keyword(s):  
Specific Gravity ◽  
Kappa Number ◽  
Raw Material ◽  
Pulp Yield ◽  
Statistical Regression ◽  
Fiber Morphology ◽  
Fiber Wall ◽  
Chemical Content ◽  
Hardwood Pulp

The demand for hardwood pulp increased due to the limited hardwood in several countries and its advantage as raw material for paper or paper boards. The hardwood has a specific grafity ranging from low to high that causes the quality of pulp produced not uniform. The observation of specific gravity, fiber morphology, and chemical content of hardwood; and the quality of hardwood pulp have been done. FAO data were used to evaluate the fiber length, fiber wall, lignin, extractives, Kappa Number, and the quality of sulphate pulp. The sulfidity, active alkali, solid to liquor ratio, temperature, and cooking time of pulping process were 25%, 17%, 1 :4, 170°C, and 3.5 hours, respectively. The specific gravity of hardwood in the range of 0.30 to 0.99 was grouped into seven classes and analyzed by statistical regression. The specific gravity of the hardwood was associated withfiber morphology, chemical content, pulping, and pulp quality. The results showed that tha specific gravity of wood affects certain parameters with regression equation model that can be used for the selection ofwood raw materials for sulphate pulping. There is a tendency that the specific gravity can influence the hardwood fiber wall thickness, lignin content, pulp yield, Kappa Number, and the physical properties of pulp for tear and tensile srength. ABSTRAKPermintaan terhadap pulp kayudaun terjadi peningkatan akibat terbatasnya kayudaun di beberapa negara dan keunggulannya sebagai bahan baku kertas atau karton. Kayudaun memiliki specific gravity rendah sampai tinggi, menyebabkan kualitas pulp yang dihasilkan tidak seragam. Pengamatan specific gravity, morfologi serat,dan kandungan kimia kayudaun, serta kualitas pulp telah dilakukan. Evaluasi dilakukan menggunakan data FAO terhadap panjang serat, dinding serat, kadar lignin, ekstraktif, bilangan Kappa, dan kualitas pulp sulfat.Kondisi pemasakan sulfiditas 25%, alkali aktif 17% , ratio 1:4, suhu 170 o C, dan waktu 3,5 jam. Specific gravity kayudaun 0,30-0,99 dikelompokkan kedalam tujuh kelas dan dianalisis dengan statistik regresi. Specific gravity kayu sebagai data tetap dihubungkan dengan morfologi serat, kimia kayu, pulping, dan kualitas pulp. Hasil menunjukkan bahwa specific gravity mempengaruhi parameter tertentu dengan model persamaan regresi yang dapat digunakan untuk seleksi bahan baku hardwood untuk pembuatan pulp sulfat. Terdapat kecenderungan bahwa specific gravity kayudaun dapat mempengaruhi ketebalan dinding serat, kadar lignin, rendemen pulp, bilangan Kappa, sifat fisik pulp untuk sobek, dan tarik.

scholarly journals Preparation and application of carbon and hollow TiO2 microspheres by microwave heating at a low temperature

e-Polymers ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 200-209
Author(s):  
Caiyun Zhang ◽  
Chunhong Li ◽  
Bolin Ji ◽  
Zhaohui Jiang
Keyword(s):  
Low Temperature ◽  
Microwave Heating ◽  
Raw Material ◽  
Carbon Microspheres ◽  
Microwave Assisted ◽  
The Core ◽  
Good Crystallinity ◽  
Carbon Core ◽  
Microwave Assisted Method ◽  
Uniform Particle Size

Abstract A fast, simple, and energy-saving microwave-assisted approach was successfully developed to prepare carbon microspheres. The carbon microspheres with a uniform particle size and good dispersity were prepared using glucose as the raw material and HCl as the dehydrating agent at low temperature (90°C) in an open system with the assistance of microwave heating. The carbon microspheres were characterized by elemental analysis, XRD, SEM, FTIR, TG, and Raman. The results showed that the carbon microspheres prepared under the condition of 18.5% (v/v) HCl and heating for 30 min by microwave had a narrow size distribution. The core–shell structure of the carbon core and TiO2 shell was prepared with (NH4)2TiF6, H3BO3 using the microwave-assisted method. The hollow TiO2 microspheres with good crystallinity and high photocatalytic properties were successfully prepared by sacrificing the carbon microspheres.

scholarly journals Mechanism of Compound Houttuynia Mixture as an Anti-COVID-19 Drug Based on Network Pharmacology and Molecular Docking

2021 ◽  
Vol 16 (5) ◽  
pp. 1934578X2110167
Author(s):  
Xing-Pan Wu ◽  
Tian-Shun Wang ◽  
Zi-Xin Yuan ◽  
Yan-Fang Yang ◽  
He-Zhen Wu
Keyword(s):  
Molecular Docking ◽  
Target Prediction ◽  
Interaction Network ◽  
Scientific Basis ◽  
Network Pharmacology ◽  
Chemical Components ◽  
Active Components ◽  
Discovery Studio ◽  
The Core ◽  
Pathway Annotation

Objective To explore the anti-COVID-19 active components and mechanism of Compound Houttuynia mixture by using network pharmacology and molecular docking. Methods First, the main chemical components of Compound Houttuynia mixture were obtained by using the TCMSP database and referring to relevant chemical composition literature. The components were screened for OB ≥30% and DL ≥0.18 as the threshold values. Then Swiss Target Prediction database was used to predict the target of the active components and map the targets of COVID-19 obtained through GeneCards database to obtain the gene pool of the potential target of COVID-19 resistance of the active components of Compound Houttuynia mixture. Next, DAVID database was used for GO enrichment and KEGG pathway annotation of targets function. Cytoscape 3.8.0 software was used to construct a “components-targets-pathways” network. Then String database was used to construct a “protein-protein interaction” network. Finally, the core targets, SARS-COV-2 3 Cl, ACE2 and the core active components of Compound Houttuyna Mixture were imported into the Discovery Studio 2016 Client database for molecular docking verification. Results Eighty-two active compounds, including Xylostosidine, Arctiin, ZINC12153652 and ZINC338038, were screened from Compound Houttuyniae mixture. The key targets involved 128 targets, including MAPK1, MAPK3, MAPK8, MAPK14, TP53, TNF, and IL6. The HIF-1 signaling, VEGF signaling, TNF signaling and another 127 signaling pathways associated with COVID-19 were affected ( P < 0.05). From the results of molecular docking, the binding ability between the selected active components and the core targets was strong. Conclusion Through the combination of network pharmacology and molecular docking technology, this study revealed that the therapeutic effect of Compound Houttuynia mixture on COVID-19 was realized through multiple components, multiple targets and multiple pathways, which provided a certain scientific basis of the clinical application of Compound Houttuynia mixture.

scholarly journals Assessment of Pellets from Three Forest Species: From Raw Material to End Use

Forests ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 447
Author(s):  
Miguel Alfonso Quiñones-Reveles ◽  
Víctor Manuel Ruiz-García ◽  
Sarai Ramos-Vargas ◽  
Benedicto Vargas-Larreta ◽  
Omar Masera-Cerutti ◽  
...  
Keyword(s):  
Chemical Properties ◽  
Ash Content ◽  
Hot Water ◽  
Raw Material ◽  
Chemical Components ◽  
Energy Yield ◽  
Cellulose Content ◽  
Fixed Carbon ◽  
End Use ◽  
The Impact

This study aimed to evaluate and compare the relationship between chemical properties, energy efficiency, and emissions of wood and pellets from madroño Arbutus xalapensis Kunth, tázcate Juniperus deppeana Steud, and encino colorado Quercus sideroxyla Humb. & Bonpl. in two gasifiers (top-lit-up-draft (T-LUD) and electricity generation wood camp stove (EGWCS)) in order to determine the reduction of footprint carbon. In accordance with conventional methodologies, we determined the extracts and chemical components (lignin, cellulose, holocellulose), and the immediate analyses were carried out (volatile materials, fixed carbon, ash content and microanalysis of said ash), as well as the evaluation of emission factors (total suspended particulate matter (PM2.5), CO, CO2, CH4, black carbon (BC), elemental carbon (EC), and organic carbon (OC)). The results were statistically analyzed to compare each variable among species and gasifiers. The raw material analyzed showed how the pH ranged from 5.01 to 5.57, and the ash content ranged between 0.39 and 0.53%. The content values of Cu, Zn, Fe, Mg, and Ca ranged from 0.08 to 0.22, 0.18 to 0.19, 0.38 to 0.84, 1.75 to 1.90, and 3.62 to 3.74 mg kg−1, respectively. The extractive ranges from cyclohexane were 2.48–4.79%, acetone 2.42–4.08%, methanol 3.17–7.99%, and hot water 2.12–4.83%. The range of lignin was 18.08–28.60%. The cellulose content ranged from 43.30 to 53.90%, and holocellulose from 53.50 to 64.02%. The volatile material range was 81.2–87.42%, while fixed carbon was 11.30–17.48%; the higher heating value (HHV) of raw material and pellets presented the ranges 17.68–20.21 and 19.72–21.81 MJ kg−1, respectively. Thermal efficiency showed statistically significant differences (p < 0.05) between pellets and gasifiers, with an average of 31% Tier 3 in ISO (International Organization for Standardization) for the T-LUD and 14% (ISO Tier 1) for EGWCS, with Arbutus xalapensis being the species with the highest energy yield. The use of improved combustion devices, as well as that of selected raw material species, can reduce the impact of global warming by up to 33% on a cooking task compared to the three-stone burner.

Analyses and evaluation of the main chemical components in different tobacco (Nicotiana tabacum L.) genotypes

2021 ◽  
Vol 72 (1) ◽  
pp. e389
Author(s):  
M. Camlica ◽  
G. Yaldiz
Keyword(s):  
Fatty Acid ◽  
Crude Oil ◽  
Sugar Content ◽  
Industrial Applications ◽  
Reducing Sugar ◽  
Raw Material ◽  
Chemical Components ◽  
Alternative Source ◽  
Nicotine Content ◽  
Tobacco Seeds

The nicotine, reducing sugar and ion contents from the threshing of tobacco can re-used from the industry. The crude oil and fatty oil compositions of tobacco seeds can be considered as an alternative source of raw material for biodiesel. In this study, the nicotine, reducing sugar content, crude oil, fatty acid composition and ion content were determined in 29 genotypes and 1 cultivar of tobacco. The genetic diversity was determined among the tobacco cultivar and genotypes base on examined properties. The nicotine content varied between 0.10-0.87%, reducing sugar ranged from 9.70-21.30%, crude oil varied between 24.33-47.00% and fatty acid compositions was found in the range of 77.94-100%. Linoleic (13.92-75.04%) and butyric (0.33-64.98%) acids were the major components. Overall, the BSR-5 (52.56 mg/g) and ESR-5 (44.58 mg/g) genotypes exhibited the highest potassium contents and ESR-7 (6.54 mg/g) and ESR-8 (1.28 mg/g) genotypes had the lowest chlorine contents. As a result of this study, the highest nicotine content, reducing sugar and crude oil of tobacco were found in ESR-4, ESR-11 and BSR-5 genotypes, respectively. The dendrogram analysis divided the tobacco into two main groups and most of the same origin genotypes fell into the same group. The results indicated that the different tobacco leaves and seeds can be evaluated as an alternative source in the industry as cigarettes, biodiesel and different industrial applications such as cosmetic, oil paints and varnishes based on their chemical properties.

scholarly journals Soybean waste in particleboard production

2018 ◽  
Vol 42 (2) ◽  
pp. 186-194 ◽  
Author(s):  
Evelyn Hoffmamm Martins ◽  
Alan Pereira Vilela ◽  
Rafael Farinassi Mendes ◽  
Lourival Marin Mendes ◽  
Lívia Elisabeth Vasconcellos de Siqueira Brandão Vaz ◽  
...  
Keyword(s):  
Water Absorption ◽  
Water Immersion ◽  
Eucalyptus Grandis ◽  
Raw Material ◽  
Modulus Of Rupture ◽  
High Yield ◽  
Thickness Swelling ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Hybrid Eucalyptus

ABSTRACT Brazil is the second largest soybean producer in the world, with a yield of around 96.2 million tons per crop. This high yield leads to a great amount of waste resulting from soybean cultivation, which can reach approximately 41 million tons of waste per year. This material has lignocellulosic properties, which may enable its use as a raw material for particleboard production. Therefore, the objective of this study was to evaluate the use of soybean pods in particleboard production. For particleboard manufacture, wood of the hybrid Eucalyptus urophylla and Eucalyptus grandis was used, added with soybean pods, at proportions of 0%, 25%, 50%, 75% and 100%. For particleboard evaluation, a completely randomized design was used, with five treatments and three replicates, using linear regression and the Scott-Knott test at 5% significance for comparison among the different treatments. The properties apparent density, compaction ratio, water absorption after 2 and 24 hours, thickness swelling after 2 and 24 hours in water immersion, internal bonding, modulus of rupture and modulus of elasticity in bending properties were evaluated. The ratio soybean pod waste and eucalyptus particles in the panels led to an increase in water absorption values and thickness swelling, in addition to a decrease in mechanical properties. The production of panels with approximately 23% soybean pods is feasible.

scholarly journals Metabolic Engineering of Fungal Strains for Conversion of d-Galacturonate to meso-Galactarate

2009 ◽  
Vol 76 (1) ◽  
pp. 169-175 ◽  
Author(s):  
Dominik Mojzita ◽  
Marilyn Wiebe ◽  
Satu Hilditch ◽  
Harry Boer ◽  
Merja Penttilä ◽  
...  
Keyword(s):  
Metabolic Engineering ◽  
Aspergillus Niger ◽  
Galacturonic Acid ◽  
Raw Material ◽  
High Yield ◽  
Hypocrea Jecorina ◽  
Bacterial Gene ◽  
Fungal Strains ◽  
Gene Coding ◽  
Reductive Pathway

ABSTRACT d-Galacturonic acid can be obtained by hydrolyzing pectin, which is an abundant and low value raw material. By means of metabolic engineering, we constructed fungal strains for the conversion of d-galacturonate to meso-galactarate (mucate). Galactarate has applications in food, cosmetics, and pharmaceuticals and as a platform chemical. In fungi d-galacturonate is catabolized through a reductive pathway with a d-galacturonate reductase as the first enzyme. Deleting the corresponding gene in the fungi Hypocrea jecorina and Aspergillus niger resulted in strains unable to grow on d-galacturonate. The genes of the pathway for d-galacturonate catabolism were upregulated in the presence of d-galacturonate in A. niger, even when the gene for d-galacturonate reductase was deleted, indicating that d-galacturonate itself is an inducer for the pathway. A bacterial gene coding for a d-galacturonate dehydrogenase catalyzing the NAD-dependent oxidation of d-galacturonate to galactarate was introduced to both strains with disrupted d-galacturonate catabolism. Both strains converted d-galacturonate to galactarate. The resulting H. jecorina strain produced galactarate at high yield. The A. niger strain regained the ability to grow on d-galacturonate when the d-galacturonate dehydrogenase was introduced, suggesting that it has a pathway for galactarate catabolism.

scholarly journals COMPOSITION, PROPERTIES AND RECYCLING OF VEGETATIVE POPLAR AFTER REMOVAL OF EXTRAC-TIVES. REPORT 3. OBTAINING BIOIOGICAL PRODUCTS BASED ON FUNGI OF THE GENUS TRIGHODERMA

2020 ◽  
pp. 415-423
Author(s):  
Elena Vladimirovna Isaeva ◽  
Ol'ga Olegovna Mamaeva ◽  
Tat'yana Vasil'yevna Ryazanova
Keyword(s):  
Plant Growth ◽  
Solid Phase ◽  
Liquid Waste ◽  
Raw Material ◽  
High Yield ◽  
Mycelial Fungi ◽  
Biological Product ◽  
Vegetative Part ◽  
Trichoderma Fungi ◽  
Composition Properties

The purpose of this work was to assess the suitability of solid and liquid waste generated during processing of the vegetative part of poplar as substrates for biochemical processing in order to obtain biologics for various purposes. For the study, we used post-extraction residues, as well as a cubic liquid formed after distilling essential oils and extracting alcohol-soluble substances from the vegetative part of the balsamic poplar (Populus balzamifera L.). Siberian strains of fungi of the genus Trichoderma used as a biodestructor. Studies have shown that the vegetative part of poplar and its individual elements are an available substrate for the growth of mycelial fungi. The high yield of spores (4.5×109 spor/g) and the formation of humic substances (11%) used as plant growth stimulators during solid-phase cultivation of the MG-97 strain of Trichoderma fungi gives grounds to use the vegetative part of poplar as a technological raw material for obtaining a biological product of the "Trichodermin" type or soil humification. Depending on the purpose of the preparations, the duration of cultivation can vary: for obtaining agricultural biologics up to 15 days, more – for soil humification. The inclusion of a cubic liquid at the stage of substrate humidification allows to obtain a biological product with a higher spore titer (5×109 spor/g), makes it possible to close the water consumption cycle and make the technology of processing the vegetative part of poplar waste-free.

Sign in / Sign up

Export Citation Format

Share Document