Residual Stress Formation at Arbitrary Types of Rollers during the Running in Process
In the article the results of the design and analysis of mathematical model for determining residual stresses in the surface of layer at parts processed by plastic surface deformation (PSD) in which the rollers having an arbitrary shape and size. It is shown that for the calculation of stresses in the surface of layer it should not be defined by them at a forcing point but by a function of contact stresses. Integral equations are obtained for calculating the stresses in the body parts at the processing of PSD rolls of arbitrary size and shape of the stress distribution over the contact area. We found that the tangential and radial residual stresses depend on the magnitude of the force F and its distance from the point at which the voltage is considered in detail. There is a sharp decrease in the influence of forces on the stress in the surface of the part of the distance to the point in question.The calculated data generated by the proposed method are highly matches with data during the experimental investigations. Maximum deviations of the calculated values do not exceed the errors of the experiments and adequate treatment of each other at a significance level of 0.05.