Experimental Study of Performance of Asphalt Mixture under Freeze-Thaw Circle Test

2013 ◽  
Vol 723 ◽  
pp. 353-360
Author(s):  
Li Bo Gao ◽  
Xing Hua Fan ◽  
Ming Gao ◽  
Feng Cheng Wang
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Fatigue Life ◽  
Quantitative Analysis ◽  
Dynamic Modulus ◽  
Asphalt Mixture ◽  
Freeze Thaw ◽  
Splitting Strength ◽  
Dynamic Creep ◽  
Road Performance

This paper has studied the mechanical properties (freeze-thaw splitting strength, and dynamic modulus) and road performance (dynamic creep and fatigue life) of the asphalt mixture under the freeze-thaw circle test, and made the quantitative analysis of the influence on the material performance under freeze-thaw circle test.

scholarly journals Research on the Performance of Regenerant Modified Cold Recycled Mixture with Asphalt Emulsions

2021 ◽  
Vol 13 (13) ◽  
pp. 7284
Author(s):  
Decai Wang ◽  
Tengteng Guo ◽  
Haolei Chang ◽  
Xianhua Yao ◽  
Yuanzhao Chen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Dynamic Modulus ◽  
Dynamic Mechanical Properties ◽  
Moisture Susceptibility ◽  
Splitting Strength ◽  
Temperature Performance ◽  
Strength Tests ◽  
Asphalt Emulsions ◽  
Coefficient Method

In order to study the mechanical properties and effect of a regenerant on a cold recycled mixture with asphalt emulsions (CRMEs), the moisture susceptibility, high-temperature performance, low-temperature performance, dynamic mechanical properties and durability of CRMEs were analyzed and evaluated by immersion splitting strength tests, freeze-thaw splitting strength tests, rutting tests, semi-circle bending tests, uniaxial compression dynamic modulus tests and indirect tensile tests. Scanning electron microscopy (SEM) was used to analyze the micromorphology of CRMEs modified with regenerant. Finally, a comprehensive evaluation system of five different CRMEs was established based on the efficacy coefficient method to quantitatively analyze the comprehensive performance of the CRMEs. The test results showed that the regenerant can significantly improve the water immersion splitting strength, freeze-thaw splitting strength fracture energy density, and fatigue resistance of CRMEs. However, the addition of regenerant affected the high-temperature performance of the cold recycled mixture. The dynamic modulus of the CRMEs first increased and then decreased with regenerant content increasing. When the regenerant content was 8%, the dynamic modulus of the CRMEs was the highest. Adding styrene-butadiene rubber (SBR) latex can improve the high-temperature performance of CRMEs, but the moisture susceptibility, low temperature performance and fatigue resistance of the cold recycled mixture were not significantly improved, and the dynamic modulus of the mixture was reduced. Based on the efficacy coefficient method, the optimal content of regenerant is 8%. Regenerant are potential modifiers for cold recycled mixture that they can significantly improve the dynamic mechanical properties and durability.

Experimental Study of Mechanical Properties of PVA-ECC under Freeze-Thaw Cycles

2018 ◽  
Vol 46 (6) ◽  
pp. 20160145 ◽  
Author(s):  
WenJie Ge ◽  
Chen Cai ◽  
Xiang Ji ◽  
Ashraf F. Ashour ◽  
DaFu Cao
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Freeze Thaw

The Analyze Study of Compacting Temperature and Road Performance of Warm Mix Asphalt Mixture (LEADCAP)

2013 ◽  
Vol 361-363 ◽  
pp. 1681-1688 ◽  
Author(s):  
Hai Sheng Zhao ◽  
Wei Chen ◽  
Xiao Yan Wang
Keyword(s):  
Low Temperature ◽  
Dynamic Modulus ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Organic Additive ◽  
Bending Test ◽  
High Temperature Stability ◽  
The Road ◽  
Indirect Tension ◽  
Road Performance

This paper used one kind of organic additive LEADCAP to reduce the compacting temperature of SBS WMA mixture, and compared the WMA mixture compacted by superpave gyratory compactor (SGC) with HMA mixture to determine the compacting temperature of WMA mixture. Rutting test, low temperature bending test, freeze-thaw indirect tension test, Hamburg Wheel-Track test and dynamic modulus were carried out to evaluate the road performance of WMA mixed with LEASCAP. The test result showed that the WMA mixed with LEADCAP had well performed high temperature stability, low temperature stability, water stability, rutting cracking resistance, and high dynamic modulus, the compacting temperature were 127 °C, and affectively reduced the compacting temperature of SBS WMA mixture.

Experimental Study on Mechanical Properties of Recycled Asphalt Mixture with Different Proportion of Rubber Powder

2013 ◽  
Vol 368-370 ◽  
pp. 933-938 ◽  
Author(s):  
Qi Ying Niu ◽  
Jun Yong Zhao ◽  
Ru Kai Li
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Tensile Strength ◽  
Bending Strength ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Rubber Content ◽  
Recycled Asphalt ◽  
Rubber Powder ◽  
Different Content

Through a series of mechanical properties experiment of recycled asphalt mixture composed of waste asphalt mixture 20% and different content of rubber powder, the paper analyzes and compares the elasticity, tensile strength and bending strength of asphalt mixture and recycled asphalt mixture, concluding that recycled asphalt mixture that mixed with crumb rubber content of 20% can completely replace the new asphalt mixture in the application. It has great significance for the future to recycling waste asphalt mixture in the highway.

Experiment Study of Water Stability of Fiber-Reinforced Asphalt Mixture

2011 ◽  
Vol 243-249 ◽  
pp. 710-716 ◽  
Author(s):  
Ying Chun Cai ◽  
Yuan Xun Zheng
Keyword(s):  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Water Stability ◽  
Fiber Reinforced ◽  
Freeze Thaw ◽  
Optimum Dosage ◽  
Splitting Strength ◽  
Splitting Test ◽  
Marshall Test

To study the influence of fiber on the water stability of asphalt mixtures, the optimum dosage of asphalt and fibers are studied by the method of Marshall test and rut test. The results demonstrate that the optimum dosage of asphalt and fibers are 4.63% and 0.30%, respectively. Then the improved effects of basalt fiber on water stability of asphalt mixtures are evaluated through immersed Marshall test and freeze-thaw splitting test according to related specifications. The results show that the freeze-thaw splitting strength and splitting strength without freeze-thaw of fiber-reinforced asphalt mixture are improved to some extent compared with control mixture. Splitting strength without freeze-thaw of basalt, polyester and xylogen fiber-reinforced asphalt mixture is increased by 36.4%, 15.4% and 6.2%, and freeze-thaw splitting strength is increased by 55.2%, 28.7% and 14.5%. It can be concluded that fiber can remarkably improved the water stability of asphalt mixtures, besides; the improvement effects of basalt fiber are superior to polyester fiber and xylogen fiber.

scholarly journals Characterisation of Permanent Deformation Behaviour of Asphalt Mix Based on a Combined Elastic Plastic (CEP) Parameter

2021 ◽  
Vol 6 (12) ◽  
pp. 183
Author(s):  
Abhirup B. Roy-Chowdhury ◽  
Mofreh F. Saleh ◽  
Miguel Moyers-Gonzalez
Keyword(s):  
Dynamic Modulus ◽  
Deformation Behaviour ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Asphalt Binders ◽  
Rheological Parameters ◽  
Elastic Plastic ◽  
Major Mode ◽  
Dynamic Creep ◽  
Asphalt Mix

Permanent deformation or rutting is a major mode of failure in Hot Mix Asphalt (HMA) pavements. The binder used in the asphalt mixture plays an important role in the rutting resistance performance of the mixture. Currently, the Superpave rutting parameter and a more advanced test called multiple stress creep and recovery (MSCR) are the most widely used tests for rutting characterisation of asphalt binders. However, they both have their own merits and demerits. This study was undertaken to introduce a combined Elastic-Plastic (CEP) parameter as an additional binder rheological rutting parameters. The study also aimed at investigating the applicability and potential of this parameter to supplement the existing binder rheological parameters to characterise the properties of asphalt binder related to HMA rutting performance. Additionally, the correlations of the binder rheological parameters with the asphalt mix rutting parameters generated by the dynamic creep and the dynamic modulus tests were investigated. For the polymer-modified binders, Styrene-Butadiene-Styrene (SBS) was added to the PG 70-16 binder at two concentration levels (4, and 6% by the mass of the binder). A dense-graded HMA AC 14 was tested in the Dynamic Modulus (DM) and Dynamic Creep (DC) tests for evaluating the rutting performance. The CEP parameter was found to be much more reliable than the traditional G*/sin (δ) and the non-recoverable creep compliance (Jnr) parameters for evaluating the rutting behaviour of polymer modified asphalt binders, evident from better correlations of CEP with the asphalt mix performance. Unlike Jnr, the CEP parameter revealed a wider range of values, which is comparable with asphalt mixture test results.

scholarly journals Further Investigation on Damage Model of Eco-Friendly Basalt Fiber Modified Asphalt Mixture under Freeze-Thaw Cycles

2018 ◽  
Vol 9 (1) ◽  
pp. 60 ◽  
Author(s):  
Wensheng Wang ◽  
Yongchun Cheng ◽  
Guirong Ma ◽  
Guojin Tan ◽  
Xun Sun ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Splitting Tensile Strength ◽  
Stiffness Modulus ◽  
Freeze Thaw ◽  
Damage Characteristics ◽  
Indirect Tensile

The main distresses of asphalt pavements in seasonally frozen regions are due to the effects of water action, freeze-thaw cycles, and so on. Basalt fiber, as an eco-friendly mineral fiber with high mechanical performance, has been adopted to reinforce asphalt mixture in order to improve its mechanical properties. This study investigated the freeze-thaw damage characteristics of asphalt mixtures reinforced with eco-friendly basalt fiber by volume and mechanical properties—air voids, splitting tensile strength, and indirect tensile stiffness modulus tests. Test results indicated that asphalt mixtures reinforced with eco-friendly basalt fiber had better mechanical properties (i.e., splitting tensile strength and indirect tensile stiffness modulus) before and after freeze-thaw cycles. Furthermore, this study developed logistic damage models of asphalt mixtures in terms of the damage characteristics, and found that adding basalt fiber could significantly reduce the damage degree by about 25%, and slow down the damage grow rate by about 45% compared with control group without basalt fiber. Moreover, multi-variable grey models (GM) (1,N) were established for modelling the damage characteristics of asphalt mixtures under the effect of freeze-thaw cycles. GM (1,3) was proven as an effective prediction model to perform better in prediction accuracy compared to GM (1,2).

scholarly journals Pavement Performance Investigation of Nano-TiO2/CaCO3 and Basalt Fiber Composite Modified Asphalt Mixture under Freeze‒Thaw Cycles

2018 ◽  
Vol 8 (12) ◽  
pp. 2581 ◽  
Author(s):  
Yafeng Gong ◽  
Haipeng Bi ◽  
Zhenhong Tian ◽  
Guojin Tan
Keyword(s):  
Fiber Composite ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Pavement Performance ◽  
High Temperature Stability ◽  
Nano Tio2 ◽  
Volume Stability ◽  
Modified Asphalt ◽  
Freeze Thaw ◽  
Dynamic Creep

The objective of this research is to evaluate the pavement performance degradation of nano-TiO2/CaCO3 and basalt fiber composite modified asphalt mixtures under freeze‒thaw cycles. The freeze‒thaw resistance of composite modified asphalt mixture was studied by measuring the mesoscopic void volume, stability, indirect tensile stiffness modulus, splitting strength, uniaxial compression static, and dynamic creep rate. The equal-pitch gray prediction model GM (1, 3) was also established to predict the pavement performance of the asphalt mixture. It was concluded that the high- and low-temperature performance and water stability of nano-TiO2/CaCO3 and basalt fiber composite modified asphalt mixture were better than those of an ordinary asphalt mixture before and after freeze‒thaw cycles. The test results of uniaxial compressive static and dynamic creep after freeze‒thaw cycles showed that the high-temperature stability of the nano-TiO2/CaCO3 and basalt fiber composite modified asphalt mixture after freeze‒thaw was obviously improved compared with an ordinary asphalt mixture.

Sign in / Sign up

Export Citation Format

Share Document