Study on Evaluation of High Slope Stability and Countermeasures Based on GEO-SLOPE

2014 ◽  
Vol 988 ◽  
pp. 371-376
Author(s):  
Nian Qin Wang ◽  
Qing Tao Wang ◽  
Qi Pang ◽  
Qian Xue
Keyword(s):  
Slope Stability ◽  
Limit Equilibrium ◽  
Optimization Analysis ◽  
High Slope ◽  
Stability Coefficient ◽  
Anchor Cable ◽  
Before And After ◽  
The Stability ◽  
Reinforcement Measures

Based on the theory of limit equilibrium, by the GEO-SLOPE software,analyzed the stability before and after reinforcement of a high Loess-bedrock slope. The results and conclusions show: (1)Analyzed and Optimized the high Loess-bedrock slope through SLOPE/W module, optimizing the engineering quantity of the anchor cable frame in the local and saving the investment; (2)When taken reinforcement measures, conducted the SLOPE/W model again, the stability coefficient is 1.459, the effect testified by projects is obvious; (3)Aiming at the optimization analysis, proposed countermeasures system, with reference for reinforcement of a high Loess-bedrock slope.

Analysis and Study on Slope Stability of High Fill Subgrade

2014 ◽  
Vol 919-921 ◽  
pp. 637-640 ◽  
Author(s):  
Qi Zhang
Keyword(s):  
Finite Element Method ◽  
Slope Stability ◽  
Slope Failure ◽  
Lateral Displacement ◽  
Limit Equilibrium ◽  
Soil Deformation ◽  
High Slope ◽  
Calculation Results ◽  
External Conditions ◽  
The Stability

The slope failure of high fill embankment have a large proportion under self-weight and external conditions,Because of the complexity of the soil deformation and stress,General methods such as the limit equilibrium and numerical analysis have their own limitations,The paper takes high fill subgrade engineering in Fujian province as the background.Adopting analytical method and finite element method calculate the stability coefficient and lateral displacement of high fill embankment slope.moreover,Making a comprehensive judgement to the stability of the slope by comparing with the actual value.The results show that calculation results of these two methods are close.Which can make accurate predictions on high slope stability and determine a judgement.and provides an effective method for the design and construction of the similar project.

The Application of FLAC Software in Stability Analysis of Highway Slope Reinforced by Prestressed Anchor Cable

2012 ◽  
Vol 241-244 ◽  
pp. 2158-2162
Author(s):  
Hui Min Wang ◽  
Liang Cao ◽  
Ji Yao ◽  
Ze Li
Keyword(s):  
Numerical Simulation ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
Stability Factor ◽  
Anchor Cable ◽  
Equilibrium Method ◽  
Before And After ◽  
Calculation Results ◽  
The Stability ◽  
Prestressed Anchor

rigid limit equilibrium method and numerical simulation of FLAC software based on strength reduction method was used in this paper, and the stability of a highway slope before and after the reinforcement by prestressed anchor cable was analyzed. The calculation results showed that, the stability of designed excavated slope could not meet the requirements, while the stability of reinforced sloped by prestressed anchor cable could. The sliding surface of the slope and the corresponding stability factor could be obtained in two ways, but the numerical simulation of FLAC software considered the material deformation, so the calculation results was smaller than the results of rigid limit equilibrium method.

scholarly journals Application of Flow Velocity and Direction Measurement System in Slope Stability Analysis

Water ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 700
Author(s):  
Qi Ge ◽  
Jingjing Zhang ◽  
Zhongxuan Chen ◽  
Jin Li
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Flow Velocity ◽  
Limit Equilibrium ◽  
Hydrodynamic Pressure ◽  
Slope Stability Analysis ◽  
Before And After ◽  
The Stability ◽  
Slice Method

Hydrodynamic pressure is often a crucial factor in the evaluation of slope stability analysis, especially for many rainfall-triggered landslides. Nevertheless, hydrodynamic pressure is rarely considered in the traditional limit equilibrium slice method of slope stability analysis since effective and reliable hydrodynamic pressure data are often lacking in practice. Moreover, efficient methods to involve these data in slope stability analysis are an urgent need. To overcome these concerns, the flow velocity and direction system (FVDS) is employed to measure the groundwater flow velocity, which can be used to generate hydrodynamic pressure samples at different monitoring points. Based on these samples, the hydrodynamic pressure of each soil strip is estimated using artificial neural networks (ANNs). Afterward, an improved Bishop method that considers hydrodynamic pressure is proposed. The effectiveness and significance of the proposed method are illustrated with a case study, the Fanshantou landslide in Zhejiang Province, China. The safety factor before and after taking drainage countermeasures is also calculated and compared. The results indicate that hydrodynamic pressure plays an important role in the stability analysis of the Fanshantou landslide. Compared with the classical Bishop method, the improved method is shown to agree better with the actual deformation characteristics of the landslide.

Some difficulties associated with the limit equilibrium method of slices

1983 ◽  
Vol 20 (4) ◽  
pp. 661-672 ◽  
Author(s):  
R. K. H. Ching ◽  
D. G. Fredlund
Keyword(s):  
Slope Stability ◽  
Factor Of Safety ◽  
Limit Equilibrium ◽  
Stability Limit ◽  
Limit Equilibrium Method ◽  
Soil Conditions ◽  
Side Force ◽  
Limit Equilibrium Methods ◽  
Equilibrium Method ◽  
The Stability

Several commonly encountered problems associated with the limit equilibrium methods of slices are discussed. These problems are primarily related to the assumptions used to render the inherently indeterminate analysis determinate. When these problems occur in the stability computations, unreasonable solutions are often obtained. It appears that problems occur mainly in situations where the assumption to render the analysis determinate seriously departs from realistic soil conditions. These problems should not, in general, discourage the use of the method of slices. Example problems are presented to illustrate these difficulties and suggestions are proposed to resolve these problems. Keywords: slope stability, limit equilibrium, method of slices, factor of safety, side force function.

Analyses for the stability of potash tailings piles

1993 ◽  
Vol 30 (3) ◽  
pp. 491-505 ◽  
Author(s):  
Delwyn G. Fredlund ◽  
Zai Ming Zhang ◽  
Karen Macdonald
Keyword(s):  
Slope Stability ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Field Studies ◽  
Equilibrium Analysis ◽  
Limit Equilibrium Analysis ◽  
Dissipation Model ◽  
The Stability

The stability of potash tailings piles is investigated using a pore-water pressure generation and dissipation model together with a limit equilibrium analysis. It is found that a shallow toe failure mode is generally the most applicable and that the stability may be influenced by pore-water pressure migration below the pile. It is suggested that field studies would be useful in evaluating stability in the toe region of the pile. Key words : potash tailings, slope stability, pore pressure dissipation, solutioning.

Search of the Most Dangerous in Slide Slope Stability Analysis Based on Genetic Algorithm

2012 ◽  
Vol 166-169 ◽  
pp. 2535-2538
Author(s):  
Ke Wang ◽  
Chang Ming Wang ◽  
Fang Qi ◽  
Cen Cen Niu
Keyword(s):  
Genetic Algorithm ◽  
Stability Analysis ◽  
Slope Stability ◽  
Slip Surface ◽  
Limit Equilibrium ◽  
Evolutionary Process ◽  
Limit Equilibrium Method ◽  
Slope Stability Analysis ◽  
Equilibrium Method ◽  
The Stability

The traditional limit equilibrium method in the analysis of slope stability not only exists some subjective empirical hypothesis that can not meet the equilibrium of force and moment, but also ignores the effects of internal stress and strain on the slope stability. Furthermore, in the stability of the slope evaluation, limit equilibrium method relies too much on experience when hypothesizing the slope slip surface. So that it makes deviation on slope analysis and stability evaluation. This paper is based on simplified Bishop method used to establish the model of slope stability analysis. And it used genetic algorithms to solve the minimum safety factor and the most dangerous slip surface of slope. It was the arithmetic which simulates organisms genetic evolutionary process and it avoided the traditional methods falling into the local extreme value point easily and error propagation leading to convergence. The algorithm had advantages of higher accuracy, quick convergence and applicability. It showed that the genetic algorithm is accurate and reliable in the analysis of slope stability.

scholarly journals Brasília municipal solid waste landfill: a case study on flow and slope stability

2021 ◽  
Vol 44 (3) ◽  
pp. 1-13
Author(s):  
José Fernando Jucá ◽  
Alison Norberto ◽  
José Ivan Santos Júnior ◽  
Fernando Marinho
Keyword(s):  
Shear Strength ◽  
Slope Stability ◽  
Limit Equilibrium ◽  
Drainage System ◽  
Equilibrium Analysis ◽  
Water Retention Capacity ◽  
Retention Capacity ◽  
Cause Of Failure ◽  
Leachate Level ◽  
The Stability

For geotechnical and environmental reasons, landfills are positioned above the regional water table and thus are formed in unsaturated conditions. This condition can be different if the drainage system and the rain regime of the site are such that they create a level of internal liquid in the landfill. During January and February 2019, excessive movements occurred in the slopes of the Brasília sanitary landfill. A geotechnical investigation indicated that the raised leachate level caused by the clogging of the drainage system contributed to the landfilled waste movements. The limit equilibrium analysis was used to predict the relationship between leachate level and slope stability. In order to understand the process that led to the rupture, flow and stability analysis by limit equilibrium were performed. The parameters associated with flow, water retention capacity, and shear strength were obtained based on literature evaluations. In addition, data from tests were used, which allowed to define more accurately the distribution of pore pressures of liquid that led to the failure. This study allowed to define the cause of failure and also to establish the role of the drainage system in maintaining the stability of the landfill. The studies indicated that although the gain of shear strength of landfill due to the unsaturated condition is negligible, the process of flow in unsaturated medium, associated with climatic aspects, are fundamental for a medium- and long-term analysis.

scholarly journals AN EVALUATION OF ROCK SLOPE STABILITY USING LIMIT EQUILIBRIUM ANALYSES

2015 ◽  
Vol 6 (2) ◽  
Author(s):  
Faridha Aprilia ◽  
I Gde Budi Indrawan
Keyword(s):  
Slope Stability ◽  
Rock Slope ◽  
Limit Equilibrium ◽  
Rock Slope Stability ◽  
Rock Slopes ◽  
Plane Failure ◽  
General Limit ◽  
The Stability ◽  
Equilibrium Analyses ◽  
Limit Equilibrium Analyses

The stability of rock slopes is controlled by several factors, such as the intact rock strength, discontinuity characteristics, groundwater condition, and slope geometry. Limit equilibrium (LE) analyses have been commonly used in geotechnical practice to evaluate the stability of rock slopes. A number of methods of LE analyses, ranging from simple to sophisticated methods, have been developed. This paper presents stability analyses of rock slopes at the Batu Hijau open mine in Sumbawa Barat using various methods of LE analyses. The LE analyses were conducted at three cross sections of the northern wall of the open mine using the Bishop Simplified, Janbu Simplified, Janbu Generalised, and General Limit Equilibrium (GLE) methods in Slide slope stability package. In addition, a Plane Failure (PF) analysis was performed manually. Shear strength data of the discontinuity planes used in the LE analyses were obtained from back analyses of previous rock slope failures. The LE analysis results showed that the rock slopes were likely to have shallow non-circular critical failure surfaces. The factor of safety (Fs) values obtained from the Bishop Simplified, Janbu Simplified, Janbu Generalised, and GLE methods were found to be similar, while the Fs values obtained from the PF method were higher than those obtained from the more rigorous methods. Keywords: Batu Hijau mine, Bishop Simplified, Janbu Simplified, Janbu Generalised, limit equilibrium analyses, general limit equilibrium, rock slope stability, plane failure.

Comparing slope stability analysis using limit equilibrium and finite elements simulations of deep-seated landslides along the western margin of the Main Ethiopian Rift

2021 ◽  
Author(s):  
Tesfay Kiros Mebrahtu ◽  
Thomas Heinze ◽  
Stefan Wohnlich
Keyword(s):  
Slope Stability ◽  
Factor Of Safety ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
Strength Reduction ◽  
Ethiopian Rift ◽  
Seismic Load ◽  
Main Ethiopian Rift ◽  
Western Margin ◽  
The Stability

<p>Landslides and ground failures are among the common geo-environmental hazards in many of the tectonically active hilly and mountainous terrains of Ethiopia, such as in the western margin of the Main Ethiopian Rift in Debre Sina area. Besides the geological preconditioning, bi-modal monsoon and seismic events in the tectonically highly active region are usually suspected triggers. In order to minimize the damage caused by the slope failure events, a detailed investigation of landslide-prone areas using numerical modelling plays a crucial role. The aim of this study is to assess the stability of slopes, to understand the relevant failure mechanisms, and to evaluate and compare safety factors calculated by the different available numerical methods. The stability was assessed for slopes of complex geometry and heterogeneous material using the limit equilibrium method and the shear strength reduction method based on finite elements. Furthermore, numerical analysis was done under static and pseudo-static loading using the horizontal seismic coefficient to model their stability during a seismic event. The slope stability analysis indicates that the studied slopes are unstable, and any small scale disturbance will further reduce the factor of safety and probably causing failure. The critical strength reduction factors from the finite element method are significantly lower than the factor of safety from the limit equilibrium method in all studied scenarios, such as Bishop, Janbu Simplified, Spencer and Morgenstern-Price. The difference is especially evident for heterogeneous slopes with joints, which often are initiation points for the failure planes. The simulations show that slope stability of landslide prone hills in the study area strongly depends on the saturation conditions and the seismic load. The studied slopes are initially close to failure and increased pore-pressure or seismic load are very likely triggers.</p>

Subgrade Slope Stability Analysis under the Condition of Rainfall Infiltration

2013 ◽  
Vol 353-356 ◽  
pp. 1073-1076
Author(s):  
Guang Jun Guo ◽  
Guang Hua Liu ◽  
Jun Sui ◽  
Jian Qing Wu
Keyword(s):  
Slope Stability ◽  
Theoretical Basis ◽  
Soil Mechanics ◽  
Limit Equilibrium ◽  
Rainfall Infiltration ◽  
Equilibrium Analysis ◽  
Limit Equilibrium Analysis ◽  
Factors Affecting ◽  
Unsaturated Soil Mechanics ◽  
The Stability

On basis of limit equilibrium analysis methods for theory of unsaturated soil mechanics, silt subgrade slope stability under the condition of rainfall infiltration is analyzed and the factors affecting the stability of subgrade slope are presented in this article, which provides theoretical basis and technical support for future subgrade construction.

Sign in / Sign up

Export Citation Format

Share Document