COMPARATIVE STUDY USING RAW AND TREATED CASSAVA AND LEMON RESIDUES IN THE REMOVAL OF NICKEL (II)

Agrociencia ◽  
2021 ◽  
Vol 55 (2) ◽  
pp. 145-158
Author(s):  
Candelaria Tejada Tovar ◽  
Diofanor Acevedo ◽  
Angel Villabona Ortíz ◽  
Nórida Pájaro Gómez ◽  
María Otero
Keyword(s):  
Heavy Metals ◽  
Citric Acid ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Metal Removal ◽  
Anthropogenic Activities ◽  
Citrus Limon ◽  
Manihot Esculenta Crantz ◽  
High Concentrations ◽  
High Level

Increasing pollution of water bodies by heavy metals from different anthropogenic activities, mainly of industrial nature, generates a high level of danger due to accumulation. Within a given time, heavy metals reach high concentrations in living organisms, especially those around sites of discharge. The objective of this research was to evaluate the adsorption capacity of dried lemon (Citrus limon) and cassava (Manihot esculenta Crantz) peels, raw or treated with citric acid, to remove Ni (II) in synthetic aqueous solution with 100 mg L-1 of metal. To assess adaptation and characterize these bio-adsorbents, biomasses were washed with distilled water. They were dried at 90 °C for 24 h and then ground in a mill. The modification of the cassava and lemon peels was carried out with 0.6 M citric acid; followed by adsorption and kinetic tests that were carried out in a discontinuous system. The biomaterials were characterized by chemical, elemental and Fourier transform infrared spectroscopy (FTIR) analysis. We found that both biomasses are composed mostly of carbon and cellulose. The FTIR showed the presence of carboxyl, amino, carbonyl and hydroxyl functional groups, which intervene in the adsorption process. Lemon and cassava peels showed 95.8% adsorption capacity of Ni (II) ions, and 75.69% removal of the contaminants. The best adsorbent particle sizes were 0.5 mm for lemon, and 1 mm for cassava peel, the two biomasses at pH 6. The best fit of the experimental data was Freundlich’s model and the pseudo-second-order model best described adsorption kinetics in the Ni (II) removal process. Treatment of the biomasses with citric acid did not render a significant improvement in metal removal. The best conditions for an efficient adsorption process were achieved using a specific particle size for lemon, 0.5 mm, and 1 mm for cassava residues.

Use of Bioballs as an Adsorbent for the Removal of Copper

2021 ◽  
Vol 43 (2) ◽  
pp. 114-114
Author(s):  
Hakan elebi Hakan elebi
Keyword(s):  
Heavy Metals ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Batch Process ◽  
Practical Method ◽  
High Density ◽  
Maximum Adsorption Capacity ◽  
Optimum Conditions ◽  
Fixed Amount ◽  
High Level

Nowadays, heavy metals, which are among the various hazardous pollutants, are present at a high level of density in the receiving environments. Among heavy metals, especially copper is mainly present in wastewater due to the industrial activities. Adsorption is the most practical method to prevent this pollution, and in recent years, researchers have been involved in researching both adsorption and cost-efficient, accessible, easy-to-apply environmentally friendly adsorbents. In this study, the adsorption capacity of high density bioballs having a potential adsorbent characteristic was investigated. Accordingly, different pH values (2.0 – 6.0) and the contact times (1 -150 minutes) of a solution on the adsorption process was evaluated under a constant agitating speed (150 rpm), a constant temperature (25and#176;C) and a fixed amount of adsorbent (2.0 g). Experimental data on the pH and contact times obtained were evaluated using different isotherm and kinetic models in a batch process. The optimum conditions for the adsorption process were determined as follows: adsorbent dose = 2 g/L, pH = 6.23 and contact time = 45 minute. The maximum copper refining efficiency of a high density bioball was calculated to be approximately 78% under the optimum conditions determined. The maximum adsorption capacity based on the Langmuir isotherm is 5.60 mg/g, and the adsorption of the copper element onto the high-density bioball is defined by a pseudo-second-order kinetics. The process was found to be applicable, spontaneous, and endothermic according to thermodynamic parameters. As a result, it has been noted that high density bioballs used as a biofilm material may be an alternative adsorbent for copper and the other heavy metals.

Mercury Removal from Wastewater by Steamed Hoof Powder

1999 ◽  
Vol 40 (7) ◽  
pp. 109-116 ◽  
Author(s):  
M. H. Ansari ◽  
A. M. Deshkar ◽  
P. S. Kelkar ◽  
D. M. Dharmadhikari ◽  
M. Z. Hasan ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Adsorption Equilibrium ◽  
Light Metal ◽  
Mercury Removal ◽  
High Adsorption ◽  
Surface Sites ◽  
Ph Values ◽  
High Adsorption Capacity

Steamed Hoof Powder (SHP), size < 53μ, was observed to have high adsorption capacity for Hg(II) with >95% removal from a solution containing 100 mg/L of Hg(II) with only 0.1% (W/V) concentration of SHP. The SHP has good settling properties and gives clear and odour free effluent. Studies indicate that pH values between 2 and 10 have no effect on the adsorption of Hg(II) on SHP. Light metal ions like Na+, K+, Ca2+ and Mg2+ up to concentrations of 500 mg/L and heavy metals like Cu2+, Zn2+, Cd2+, Co2+, Pb2+, Ni2+, Mn2+, Cr3+, Cr6+, Fe2+ and Fe3+ up to concentrations of 100 mg/L do not interfere with the adsorption process. Anions like sulphate, acetate and phosphate up to concentrations of 200 mg/L do not interfere. Chloride interferes in the adsorption process when Hg(II) concentration is above 9.7 mg/L. The adsorption equilibrium was established within two hours. Studies indicate that adsorption occurs on the surface sites of the adsorbent.

scholarly journals Exploiting the Potential in Water Cleanup from Metals and Nutrients of Desmodesmus sp. and Ampelodesmos mauritanicus

Plants ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1461
Author(s):  
Roberto Braglia ◽  
Lorenza Rugnini ◽  
Sara Malizia ◽  
Francesco Scuderi ◽  
Enrico Luigi Redi ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Metal Removal ◽  
Anthropogenic Activities ◽  
Cost Effective ◽  
Single Species ◽  
Nitrogen And Phosphorus ◽  
Removal Rates ◽  
Sequential Approach ◽  
Removal Capacity ◽  
Green Microalga

Increasing levels of freshwater contaminants, mainly due to anthropogenic activities, have resulted in a great deal of interest in finding new eco-friendly, cost-effective and efficient methods for remediating polluted waters. The aim of this work was to assess the feasibility of using a green microalga Desmodesmus sp., a cyanobacterium Nostoc sp. and a hemicryptophyte Ampelodesmos mauritanicus to bioremediate a water polluted with an excess of nutrients (nitrogen and phosphorus) and heavy metals (copper and nickel). We immediately determined that Nostoc sp. was sensitive to metal toxicity, and thus Desmodesmus sp. was chosen for sequential tests with A. mauritanicus. First, A. mauritanicus plants were grown in the ‘polluted’ culture medium for seven days and were, then, substituted by Desmodesmus sp. for a further seven days (14 days in total). Heavy metals were shown to negatively affect both the growth rates and nutrient removal capacity. The sequential approach resulted in high metal removal rates in the single metal solutions up to 74% for Cu and 85% for Ni, while, in the bi-metal solutions, the removal rates were lower and showed a bias for Cu uptake. Single species controls showed better outcomes; however, further studies are necessary to investigate the behavior of new species.

scholarly journals Biosorption of Heavy Metals by the Bacterial Exopolysaccharide FucoPol

2020 ◽  
Vol 10 (19) ◽  
pp. 6708
Author(s):  
Patrícia Concórdio-Reis ◽  
Maria A. M. Reis ◽  
Filomena Freitas
Keyword(s):  
Heavy Metals ◽  
Binding Sites ◽  
Metal Removal ◽  
Anthropogenic Activities ◽  
Chemical Methods ◽  
Ph Values ◽  
Bacterial Exopolysaccharide ◽  
Physical And Chemical ◽  
Specific Metal ◽  
Significant Health

Despite the efforts for minimizing the usage of heavy metals, anthropogenic activities still generate high amounts of wastewater containing these contaminants that cause significant health and environmental problems. Given the drawbacks of the conventional physical and chemical methods currently used, natural biosorbents (microbial cells or their products) arise as promising environmentally friendly alternatives. In this study, the binding efficiency of the polysaccharide secreted by Enterobacter A47, FucoPol, towards lead (Pb2+), cobalt (Co2+), copper (Cu2+) and zinc (Zn2+) cations was demonstrated. FucoPol revealed a higher performance for the biosorption of Pb2+, with a maximum overall metal removal of 93.9 ± 5.3% and a specific metal uptake of 41.1 ± 2.3 mg/gEPS, from a Pb2+ solution with an initial concentration of 10 mg/L, by a 5 g/L FucoPol solution. The overall metal removal decreased considerably (≤31.3 ± 1.6%) for higher Pb2+ concentrations (48 and 100 mg/L) probably due to the saturation of FucoPol’s binding sites. Pb2+ removal was also less efficient (66.0 ± 8.2%) when a higher FucoPol concentration (10 g/L) was tested. Pb2+ removal efficiency of FucoPol was maximized at pH 4.3, however, it was affected by lower pH values (2.5–3.3). Moreover, the FucoPol’s sorption performance was unaffected (overall metal removal: 91.6–93.9%) in the temperature range of 5–40 °C. These findings demonstrate FucoPol’s great potential for utilization as a biodegradable and safe biosorbent for treating waters and wastewaters contaminated with Pb2+.

scholarly journals Heavy metal removal from wastewater using various adsorbents: a review

2016 ◽  
Vol 7 (4) ◽  
pp. 387-419 ◽  
Author(s):  
Renu ◽  
Madhu Agarwal ◽  
K. Singh
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Aquatic Ecosystems ◽  
Adsorption Process ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Review Article ◽  
Removal Capacity ◽  
Removal Of Heavy Metals

Heavy metals are discharged into water from various industries. They can be toxic or carcinogenic in nature and can cause severe problems for humans and aquatic ecosystems. Thus, the removal of heavy metals from wastewater is a serious problem. The adsorption process is widely used for the removal of heavy metals from wastewater because of its low cost, availability and eco-friendly nature. Both commercial adsorbents and bioadsorbents are used for the removal of heavy metals from wastewater, with high removal capacity. This review article aims to compile scattered information on the different adsorbents that are used for heavy metal removal and to provide information on the commercially available and natural bioadsorbents used for removal of chromium, cadmium and copper, in particular.

Potential of Agricultural Waste Material (Ananas cosmos) as Biosorbent for Heavy Metal Removal in Polluted Water

2020 ◽  
Vol 1010 ◽  
pp. 489-494
Author(s):  
Abdul Hafidz Yusoff ◽  
Rosmawani Mohammad ◽  
Mardawani Mohamad ◽  
Ahmad Ziad Sulaiman ◽  
Nurul Akmar Che Zaudin ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Adsorption Capacity ◽  
Metal Removal ◽  
Low Cost ◽  
Agricultural Waste ◽  
Heavy Metal Removal ◽  
Polluted Water ◽  
Maximum Adsorption Capacity ◽  
Pineapple Peel

Conventional methods to remove heavy metals from polluted water are expensive and not environmentally friendly. Therefore, this study was carried out to investigate the potential of agricultural waste such as pineapple peel (Ananas Cosmos) as low-cost absorbent to remove heavy metals from synthetic polluted water. The results showed that Cd, Cr and Pb were effectively removed by the biosorbent at 12g of pineapple peels in 100 mL solution. The optimum contact time for maximum adsorption was found to be 90 minutes, while the optimum pH for the heavy metal’s adsorption was 9. It was demonstrated that with the increase of adsorbent dosage, the percent of heavy metals removal was also increased due to the increasing adsorption capacity of the adsorbent. In addition, Langmuir model show maximum adsorption capacity of Cd is 1.91 mg/g. As conclusions, our findings show that pineapple peel has potential to remove heavy metal from polluted water.

Horizontal Mobility of Heavy Metals from Dumpsite in North Central States, Nigeria

2020 ◽  
Vol 15 (1) ◽  
pp. 8-14
Author(s):  
J.D. Bala ◽  
J.J. Musa ◽  
H.I. Mustapha ◽  
I.Y. Yerima ◽  
D.E. Sunday ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Anthropogenic Activities ◽  
Total Concentration ◽  
Natural Soil ◽  
Toxic Substances ◽  
Central State ◽  
Dump Site ◽  
North Central ◽  
Uppermost Layer ◽  
High Concentrations

Industrialization and population growth has lead to the introduction of toxic substances into the environment as waste from manufacturing  processes. This study describes the horizontal mobility of this waste containing heavy metals from dump sites to the surrounding environment of North Central state, Nigeria. Soil samples were collected within the dumpsites and the immediate surrounding soil at distance of 10m and 20m away to assess the migration and potential bioavailability of Cr, Fe, Mn, Pb, Zn, Cu and Al. Total concentration of the heavy metals and their fractionation were determined. The results indicate that heavy metals are more concentrated in the uppermost layer with significant migration down the slope, thereby posing a threat to groundwater quality. In the fractions, the concentrations of the metals follow this sequence: Mn>Fe>Cu>Zn>Cr>Al. The mobility factors of the heavy metals are significantly high indicating high potential mobility and bioavailable forms of these heavy metals. The high concentrations of the heavy metals particularly Cr, as observed in the study is as a result of anthropogenic activities on enrichment of natural soil with bioavailable heavy metals. Consequently, there is a need to be cautious in the way waste that is generated from heavy metals sources is added to natural soil. Key words: Dump site; Environment; Heavy metals; Soil; Waste

scholarly journals Remediation of Heavy Metals from Soil by Eco Approaches

2019 ◽  
Vol 5 ◽  
pp. 1
Author(s):  
Manish Batham ◽  
Jot Sharma ◽  
◽  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Risk Factor ◽  
Plant Growth ◽  
Anthropogenic Activities ◽  
Cost Effective ◽  
Biodegradable Materials ◽  
The Earth ◽  
Heavy Metal Remediation ◽  
High Level

The contamination of soil by anthropogenic activities is of great concern in recent times. There is an urgent demand of reliable and eco-friendly approaches for remediation of this concern. The current techniques for heavy metal remediation from contaminated soil are costly, time consuming, and harmful for the environment. Toxicity of heavy metals can reduce plant growth, and a high level of presence of these heavy metals is a risk factor to human and plant health. Heavy metals neither biodegradable materials nor are created. They occur naturally in the earth crust, and they reach the environment by human activities. Organic compounds can be degraded, but metals cannot degrade, and therefore effective cleanup requires its immobilization to reduce or remove toxicity. Recently, research focuses on cost-effective technologies to clean polluted areas. Vermiremediation and phytoremediation are two such useful techniques. In these eco-friendly techniques of remediation, the target plants accumulate, volatilize the contaminants, or convert them into some nontoxic forms, thus remediating the soil.

scholarly journals CRUSTACEAN WASTE SHELLS AS ADSORPTION MATERIALS FOR HEAVY METALS IN AN AQUEOUS SOLUTION

2020 ◽  
Vol 4 (2) ◽  
pp. 33-25
Author(s):  
Queency P. Padida ◽  
Rolando V. Maningas ◽  
Christian Paul P. dela Cruz ◽  
Lustina P. Lapie ◽  
Nilda S. Alforja
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
High Capacity ◽  
Adsorption Rate ◽  
Agriculture Industry ◽  
Laguna De Bay ◽  
High Concentrations

Laguna de Bay is one of the country’s major lakes, providing a third of the fish consumed by Metro Manila’s 16 million residents. It also provides support for agriculture, industry, and hydropower generation, as well as providing a welcome respite for many Filipinos. However, because of the lake’s importance, it is threatened by a variety of issues, including pollution. Heavy metals such as mercury and lead are present in high concentrations in the lake. And these heavy metals may persist in fish, water, air and the human body. As a result, an adsorption technique for heavy metal removal in an aqueous solution was investigated. As an adsorbent, the produced chitosan from crustacean waste shells was employed. The study’s parameters were contact time, adsorbent quantity, and pH. Results showed that 0.5 g of chitosan has a higher absorption rate of 99% in 500 mg/L solutions compared to 1.0 g of chitosan with an adsorption rate of 98%. In terms of contact time, 60 minutes showed almost 100% adsorption rate while 120 minutes was 98%. With increasing pH, the amount of metal adsorption rises. This developed chitosan from crustacean waste shells indicates high capacity as adsorbent materials for heavy metals. As a result, it appears to be a viable material for water treatment.

scholarly journals Assessment of groundwater pollution in relation to heavy metals of the alluvial aquifer of Thriasion Plain (NW Attica)

2017 ◽  
Vol 47 (2) ◽  
pp. 731 ◽  
Author(s):  
D. Kyriazis ◽  
E. Zagana ◽  
G. Stamatis ◽  
F. Fillippidis ◽  
E. Psomiadis
Keyword(s):  
Heavy Metals ◽  
Anthropogenic Activities ◽  
Karst Aquifer ◽  
Alluvial Aquifer ◽  
Human Consumption ◽  
Phreatic Aquifer ◽  
Aquifer Systems ◽  
High Concentrations ◽  
Carbonate Formations ◽  
High Degree

In this study the hydrogeological and hydrochemical characteristics of Thriasion Plain are presented focusing mainly on the presence of heavy metals in the alluvial aquifer. Two main aquifer systems exist in the study area: a) the karst aquifer hosted in the karstified carbonate formations, which structure the bedrock and the margins of the alluvial basin and b) the phreatic aquifer within the Quaternary deposits of the Thriasion Plain. Coastal and submarine groundwater discharges show the direct connection of the aquifers with the sea causing intense salinization in both aquifers. The phreatic aquifer is characterized by high levels of TDS (483 – 13,067 mg/l) and correspondingly high degree of hardness (15.7 to 165.7 odH). High concentrations of Na+, Cl-, SO4 2-, NO3 -, NH4 + and PO4 3- reflect the diverse anthropogenic influences on the aquifer. The strong presence of heavy metals, Cd, Cu, Fe, Mn, Ni, Pb, Sr and Zn has been determined in the most of the samples. Their origin is associated with geogenic factors, such as the occurrences of bauxites, oxides derived from the alteration of rocks, especially shischts, organic matter within the Plio-Pleistocene sediments of the region, as well as with intense pressures from anthropogenic activities. In some cases the groundwater is improper not only for human consumption but also for many other uses.

Sign in / Sign up

Export Citation Format

Share Document