scholarly journals DEVELOPMENT OF A HAND-PUSH WEEDER FOR CUTTING WEEDS

2021 ◽  
Vol 15 (2) ◽  
pp. 162-172
Author(s):  
Olufemi Adeyemi Adetola
Keyword(s):  
Soil Moisture ◽  
Production Cost ◽  
Crop Production ◽  
Gasoline Engine ◽  
Field Capacity ◽  
Soil Condition ◽  
Galvanized Steel ◽  
Optimum Speed ◽  
Peasant Farmers ◽  
Very High

An hand-push weeder was designed, fabricated and evaluated for household use and peasant farmers in order to mechanize cutting process and minimize the higher aggressive nature of weeds contrasted with harvests poising major danger to crop production, the invasion on soils is very high particularly during the raining seasons when soil moisture is high and plant development conditions are ideal. The major components of the weeder are the weeding drum and frame made of mild steel, adjustable handle made of galvanized steel, transmission system made up of belt and pulley mechanism, two wheels both at the front and rear. The highest weeding efficiency of 93.496% and field capacity of 0.055 ha/hr were obtained based on some parameters that influence mechanized weeding (soil condition, age of weed, number of weed, and optimum speed of the weeding machine been 1800rpm). The production cost of the weeder is $185 and it is powered by a 3 hp gasoline engine.

Soil Moisture Deficits in South-Central Sweden

1989 ◽  
Vol 20 (2) ◽  
pp. 109-122 ◽  
Author(s):  
Lotta Andersson
Keyword(s):  
Soil Moisture ◽  
Field Capacity ◽  
Interannual Variations ◽  
Neutron Probe ◽  
South Central ◽  
Normal Ranges ◽  
Moisture Fluxes ◽  
In The Beginning ◽  
Probe Measurements ◽  
Different Parts

Some commonly used assumptions about climatically induced soil moisture fluxes within years and between different parts of a region were challenged with the help of a conceptual soil moisture model. The model was optimised against neutron probe measurements from forest and grassland sites. Five 10 yrs and one 105 yrs long climatic records, from the province of Östergötland, situated in south-central Sweden, were used as driving variables. It was concluded that some of the tested assumptions should not be taken for granted. Among these were the beliefs that interannual variations of soil moisture contents can be neglected in the beginning of the hydrological year and that soils usually are filled up to field capacity after the autumn recharge. The calculated climatic induced dryness was estimated to be rather insensitive to the choice of climatic stations within the region. Monthly ranges of soil moisture deficits (1883-1987) were shown to be skewed and it is therefore recommended to use medians and standard deviations in statistical analyses of “normal” ranges of soil moisture deficits.

scholarly journals Anthropogenic warming and intraseasonal summer monsoon variability amplify the risk of future flash droughts in India

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Vimal Mishra ◽  
Saran Aadhar ◽  
Shanti Shwarup Mahto
Keyword(s):  
Soil Moisture ◽  
Summer Monsoon ◽  
Crop Production ◽  
Monsoon Rainfall ◽  
Root Zone ◽  
Monsoon Season ◽  
Intraseasonal Variability ◽  
Positive Temperature ◽  
Groundwater Abstraction ◽  
Increased Risk

AbstractFlash droughts cause rapid depletion in root-zone soil moisture and severely affect crop health and irrigation water demands. However, their occurrence and impacts in the current and future climate in India remain unknown. Here we use observations and model simulations from the large ensemble of Community Earth System Model to quantify the risk of flash droughts in India. Root-zone soil moisture simulations conducted using Variable Infiltration Capacity model show that flash droughts predominantly occur during the summer monsoon season (June–September) and driven by the intraseasonal variability of monsoon rainfall. Positive temperature anomalies during the monsoon break rapidly deplete soil moisture, which is further exacerbated by the land-atmospheric feedback. The worst flash drought in the observed (1951–2016) climate occurred in 1979, affecting more than 40% of the country. The frequency of concurrent hot and dry extremes is projected to rise by about five-fold, causing approximately seven-fold increase in flash droughts like 1979 by the end of the 21st century. The increased risk of flash droughts in the future is attributed to intraseasonal variability of the summer monsoon rainfall and anthropogenic warming, which can have deleterious implications for crop production, irrigation demands, and groundwater abstraction in India.

Water-Fertilizer Coupling Effects and Efficient Utilization under Peanut-Millet Interplanting Conditions

2013 ◽  
Vol 742 ◽  
pp. 272-277
Author(s):  
Liang Shan Feng ◽  
Zhan Xiang Sun ◽  
Jia Ming Zheng
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Soil Moisture Content ◽  
Coupling Effect ◽  
Field Capacity ◽  
Nitrogen And Phosphorus ◽  
Application Rates ◽  
Optimal Value ◽  
Factor Interactions ◽  
Nitrogen Phosphorus

In this study, the results showed that water is the most important factor to affect crop yields and optimum soil moisture is lower under the conditions of peanut-and-millet interplanting. Thus, peanut-and-millet interplanting is generally able to fit most of the semi-arid region. In the interaction of various factors, the coupling effect of water and phosphorus was stronger than the coupling effect of fertilizers, following by the coupling effect of water and nitrogen. Among peanuts factors of water, nitrogen, and multi-factorial interaction of water, nitrogen, and phosphorus, water and nitrogen showed a negative effect, whereas the two-factor interactions had a positive effect. There were some differences between peanut and millet in the need for water and fertilizer, in which peanut required more nitrogen and millet needed slightly higher soil moisture and phosphorus. When other factors were in rich level, both of the optimal value for single factors of water, nitrogen, and phosphorus and the optimal value for two-factor interactions of water-nitrogen, water-phosphorus, and nitrogen-phosphorus, were higher than the optimal value for the interaction of water, nitrogen, and phosphorus. The tiny demand difference on moisture in peanut-millet interplanting could be compromised by configuring a reasonable interplanting population structure and the corresponding demand difference on fertilizer could be resolved by uneven crop planting strips. Under the condition of water-nitrogen-phosphorus interaction, the soil moisture content optimal for peanut accounted for 57.3% of the field capacity, and the related appropriate application rates of nitrogen and phosphorus were 0.98 g/pot (81.18 kg/hm2) and 0.39g/pot (32.18 kg/hm2), respectively. Likewise, the soil moisture content optimal for millet was 59.1% of the field capacity, and the counterpart appropriate application rates of nitrogen and phosphorus were 0.57 g/pot (47.03 kg/hm2) and 0.45g / pot (37.13 kg/hm2), respectively.

scholarly journals Performance evaluation of power-operated reapers for harvesting rice at farmers’ field

2018 ◽  
Vol 16 (1) ◽  
pp. 144-150
Author(s):  
Md Ashraful Alam ◽  
Anwar Hossen ◽  
AKM Saiful Islam ◽  
Monjurul Alam
Keyword(s):  
Performance Evaluation ◽  
Economic Performance ◽  
Production Cost ◽  
Field Capacity ◽  
Production Costs ◽  
High Wage ◽  
Harvesting Time ◽  
Actual Field ◽  
Field Efficiency ◽  
User Friendly

Harvesting is one of the major labor intensive works in rice cultivation. Appropriate harvesting machinery is urgently needed to reduce labor and production costs. Production cost of rice becomes high due to labor shortage and high wage rate during harvesting time. Techno-economic performance of Korean self-propelled reaper (KR), China self-propelled reaper (CR) and BRRI reaper (BR) were evaluated in order to identify the field constrains and problems of the reapers at Mithapukur of Rangpur, Bangladesh during Aman season of 2013. The actual field capacities of the KR, CR and BR were found 0.18, 0.17 and 0.15 ha h–1with the corresponding field efficiency of 55, 68 and 56%, respectively. The variation of field capacity among the models was due to turning time losses, weight of the reaper and operator’s skill. The fuel consumption of the reapers was 4.11, 2.61 and 8.39 l ha–1 for KR, CR and BR, respectively. The shattering loss of paddy harvesting was 1.66, 1.50 and 1.45% for KR, CR and BR, respectively. The break-even area of the reapers was 9.15, 7.82 and 8.43 ha yr-1 for KR, CR and BR, respectively. It is evident that the reaper could be used successfully as labor saving and user friendly technology to eliminate post-harvest problems in Bangladesh.J. Bangladesh Agril. Univ. 16(1): 144-150, April 2018

scholarly journals Growth and physiological response of two biomass sorghum (Sorghum bicolor (L.) Moench) genotypes bred for different environments, to contrasting levels of soil moisture

2015 ◽  
Vol 10 (4) ◽  
pp. 208 ◽  
Author(s):  
Lorenzo Barbanti ◽  
Ahmad Sher ◽  
Giuseppe Di Girolamo ◽  
Elio Cirillo ◽  
Muhammad Ansar
Keyword(s):  
Soil Moisture ◽  
Stomatal Conductance ◽  
Water Potential ◽  
Water Content ◽  
Aboveground Biomass ◽  
Relative Water Content ◽  
Physiological Response ◽  
Field Capacity ◽  
Biomass Sorghum ◽  
Relative Water

A better understanding of plant mechanisms in response to drought is a strong premise to achieving high yields while saving unnecessary water. This is especially true in the case of biomass crops for non-food uses (energy, fibre and forage), grown with limited water supply. In this frame, we investigated growth and physiological response of two genotypes of biomass sorghum (<em>Sorghum bicolor</em> (L.) Moench) to contrasting levels of soil moisture in a pot experiment carried out in a greenhouse. Two water regimes (high and low water, corresponding to 70% and 30% field capacity) were applied to JS-2002 and Trudan-8 sorghum genotypes, respectively bred for dry sub-tropical and mild temperate conditions. Two harvests were carried out at 73 and 105 days after seeding. Physiological traits (transpiration, photosynthesis and stomatal conductance) were assessed in four dates during growth. Leaf water potential, its components and relative water content were determined at the two harvests. Low watering curbed plant height and aboveground biomass to a similar extent (ca. 􀀀70%) in both genotypes. JS-2002 exhibited a higher proportion of belowground to aboveground biomass, <em>i.e</em>., a morphology better suited to withstand drought. Despite this, JS-2002 was more affected by low water in terms of physiology: during the growing season, the average ratio in transpiration, photosynthesis and stomatal conductance between droughty and well watered plants was, respectively, 0.82, 0.80 and 0.79 in JS-2002; 1.05, 1.08 and 1.03 in Trudan-8. Hence Trudan-8 evidenced a ca. 20% advantage in the three traits. In addition, Trudan-8 could better exploit abundant moisture (70% field capacity), increasing aboveground biomass and water use efficiency. In both genotypes, drought led to very low levels of leaf water potential and relative water content, still supporting photosynthesis. Hence, both morphological and physiological characteristics of sorghum were involved in plant adaptation to drought, in accordance with previous results. Conversely, the common assumption that genotypes best performing under wet conditions are less suited to face drought was contradicted by the results of the two genotypes in our experiment. This discloses a potential to be further exploited in programmes of biomass utilization for various end uses, although further evidence at greenhouse and field level is needed to corroborate this finding.

scholarly journals Development, yield and quality attributes of sugarcane cultivars fertigated by subsurface drip irrigation

2016 ◽  
Vol 20 (6) ◽  
pp. 525-532 ◽  
Author(s):  
André L. B. de O. Silva ◽  
Regina C. M. Pires ◽  
Rafael V. Ribeiro ◽  
Eduardo C. Machado ◽  
Gabriel C. Blain ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Drip Irrigation ◽  
Field Capacity ◽  
Soluble Solids ◽  
Subsurface Drip Irrigation ◽  
Yield And Quality ◽  
Crop Development ◽  
Crop Cycle ◽  
Subsurface Drip ◽  
Solids Content

ABSTRACT The present study aimed to evaluate the development, yield and quality of four sugarcane cultivars fertigated by subsurface drip system. The experiment was carried out in Campinas-SP, Brazil, from January 2012 to November 2013, with the cultivars SP79-1011, IACSP94-2101, IACSP94-2094 and IACSP95-5000 subjected to daily irrigations. The irrigations depths were applied to bring soil moisture to field capacity. Soil moisture was monitored using soil moisture probes. Samples were collected along the crop cycle in order to evaluate crop development and yield, at the end of the first and second ratoons. Stalk height showed good correlation for the estimation of crop yield, with R2 equal to or higher than 0.96. The cultivar IACSP95-5000 showed the highest yield in the first ratoon. In the second ratoon the highest yield was observed in IACSP94-2101, followed by IACSP95-5000 and SP79-1011. Considering the yield results associated with the technological analysis, such as soluble solids content and apparent sucrose, the cultivar IACSP95-5000 excelled the others in the cultivation under subsurface drip irrigation.

scholarly journals Design, Construct and Evaluation of a Single Row Hand-Pushed Mechanical Weed Control Machine

2021 ◽  
Vol 25 (3) ◽  
pp. 401-406
Author(s):  
A. Saleh ◽  
M.L. Suleiman
Keyword(s):  
Weed Control ◽  
Sandy Loam ◽  
Labour Force ◽  
Field Capacity ◽  
Vegetable Production ◽  
Loam Soil ◽  
Human Effort ◽  
Field Efficiency ◽  
Peasant Farmers ◽  
Control Machine

Weed control is one of the major problems in crop and vegetable production in Nigeria. Most of the peasant farmers use manual weeders in their cultivation, a process that is costly, labour intensive and time consuming. The process does not also give the farmer adequate returns to enable him breakeven. It is, therefore, necessary to design a weeding equipment which minimize the human effort and provide efficient work output for the peasant farmer. This study focus on designing, construction and evaluation of a hand-pushed weed control machine that would eliminate the challenges being faced by the farmer in weeding. Materials selected to suit the construction of the weeder are durable and locally available, easily replaced if damaged and at affordable cost. They include mild steel (3mm, 5mm), 30 mm circular (hollow) pipes, 10 mm diameter steel rod, and 40 cm pneumatic tyre. The developed weeding machine was evaluated in the experimental farm of IAR with impressive results. It works well in sandy loam soil of about 25.65% moisture content and requires less labour force compared to the manual hoe. It has about 84.7% weeding efficiency, 0.0129ha/hr effectivefield capacity, 0.019ha/hr theoretical field capacity and 68% field efficiency. The average cost of the weeding is N21, 000:00. Keywords: Manual weeding, hand-pushed weeder, weeding efficiency, field efficiency

scholarly journals Soil Water Characteristics of Gleysols in the Bamenda (Cameroon) Wetlands and Implications for Agricultural Management Strategies

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Alice Mufur Magha ◽  
Primus Azinwi Tamfuh ◽  
Lionelle Estelle Mamdem ◽  
Marie Christy Shey Yefon ◽  
Bertrand Kenzong ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Organic Carbon ◽  
Soil Organic Carbon ◽  
Soil Water ◽  
Total Variance ◽  
Organic Carbon Content ◽  
Available Water ◽  
High Soil ◽  
Local Soil ◽  
Very High

Water budgeting in agriculture requires local soil moisture information as crops depend mainly on moisture available at root level. The present paper aims to evaluate the soil moisture characteristics of Gleysols in the Bamenda (Cameroon) wetlands and to evaluate the link between soil moisture content and selected soil characteristics affecting crop production. The work was conducted in the field and laboratory, and data were analyzed by simple descriptive statistics. The main results showed that the soils had a silty clayey to clayey texture, high bulk density, high soil organic carbon content, and high soil organic carbon stocks. The big difference between moisture contents at wilting point and at field capacity testified to very high plant-available water content. Also, the soils displayed very high contents of readily available water and water storage contents. The soil moisture characteristics give sigmoid curves and enabled noting that the Gleysols attain their full water saturation at a range of 57.68 to 91.70% of dry soil. Clay and SOC contents show a significant positive correlation with most of the soil moisture characteristics, indicating that these soil properties are important for soil water retention. Particle density, coarse fragments, and sand contents correlated negatively with the soil moisture characteristics, suggesting that they decrease soil water-holding capacity. The principal component analysis (PCA) enabled reducing 17 variables described to only three principal components (PCs) explaining 73.73% of the total variance; the first PC alone expressed 45.12% of the total variance, associating clay, SOC, and six soil moisture characteristics, thus portraying a deep correlation between these eight variables. Construction of contoured ditches, deep tillage, and raised ridges management techniques during the rainy season while channeling water from nearby water bodies into the farmland, opportunity cropping, and usage of water cans and other irrigation strategies are used during the dry season to combat water constraints.

scholarly journals Uses of different techniques for the production of sustainable soil and food

2020 ◽  
Vol 2 (4) ◽  
Author(s):  
Sahrish Khan ◽  
Abdul Waris
Keyword(s):  
Adverse Effect ◽  
Disease Management ◽  
Soil Fertility ◽  
Crop Production ◽  
Soil Structure ◽  
Low Cost ◽  
New Technology ◽  
Management Strategies ◽  
Soil Condition ◽  
Plant Disease Management

Due to increase in the population which is estimated that the human papulation will increased 9.7 billion in 2050. There is also increase the demands of the food productions. That’s why there is need to solve the problems regarding to the production of the food. Major problem of the food production is the shortage of the land due to the low and bad soil structure and quality of the soil. Soil erosion is one of the main issue which is caused  due to the used of different chemicals, pesticides and fertilizers which are mainly used for the  plant growth and protection but they are the main reasons of the production of the pollution in the soil. There is need of the different new technology for the improvement of the soil structure, quality, its fertility and decontamination of pollution from the soil which are eco-friendly to the environment and have no adverse effect. In this study the role of the different techniques in which genetic engineering, Nano technologies, soil and crop management strategies, integrated pest control management strategies, sustainable remediation techniques, microbial management strategies and the different management stairgates. All these techniques aim to the production of the plants and microbes which are effective against plant disease management. The aim of the use nano agrochemicals and nano sensors for sensing environmental and pathogen conditions against disease management. The aim of the paper to provide the production of the disease resistance plant and the provide balanced nutrients supplements to the soil for the improvement of the soil condition and its fertility. These techniques have economic importance due to the use of the nano agrochemicals which are low cost and have effective and reduce the use of the chemicals substances which have negative effect on the  soil fertility.. There are sustainable remediations techniques also discussed which are used for the decontamination of the soil pollution. In this study the main focus on the improve and increase soil fertility which enhance the growth of the plants as well the production of the crop production. The production of the stress and degradation resistance microbes which is important factor for the protection of the soil from degradation or contamination. All the techniques which are used in this paper have no adverse effect they are helpful in the tolerance of the stress conditions.

scholarly journals A COMPARISON OF TWO METHODS FOR DETERMINING THE EVAPOTRANSPIRATION AND DRAINAGE COMPONENTS OF THE SOIL WATER BALANCE

1987 ◽  
Vol 67 (1) ◽  
pp. 43-54 ◽  
Author(s):  
C. P. MAULÉ ◽  
D. S. CHANASYK
Keyword(s):  
Soil Moisture ◽  
Water Balance ◽  
Gradient Method ◽  
Field Capacity ◽  
The Other ◽  
Soil Water Balance ◽  
Moisture Loss ◽  
Moisture Extraction ◽  
Soil Moisture Status ◽  
Capacity Method

Two simple techniques for separating soil moisture loss into drainage and evapotranspiration for cropped conditions were compared. The study was conducted during May through September 1983 at Ellerslie, Alberta. One technique, the field capacity method, utilized soil tension at − 4 kPa to demarcate the cessation of drainage; the other technique, the gradient method, utilized changes in soil moisture status relative to fallow conditions, to mark the onset of moisture extraction by roots. Both methods estimated similar amounts of drainage and evapotranspiration for the barley plots. Application and thus proper evaluation of these two methods were limited as more than 83% of the total drainage occurred during a 3-wk period in which only the Penman method for estimating evapotranspiration could be used. Key words: Water balance, drainage, evapotranspiration, field capacity method, gradient method

Sign in / Sign up

Export Citation Format

Share Document