scholarly journals Design and Manufacture of a Multiband Rectangular Spiral-Shaped Microstrip Antenna Using EM-Driven and Machine Learning

2021 ◽  
Vol 27 (1) ◽  
pp. 29-40
Author(s):  
Ashrf Aoad
Keyword(s):  
Machine Learning ◽  
Microstrip Antenna ◽  
Machine Learning Algorithms ◽  
Mobile Systems ◽  
Training Data ◽  
Learning Models ◽  
Prediction Ability ◽  
Antenna Structure ◽  
Wide Range ◽  
Machine Learning Models

This paper presents a multiband rectangular microstrip antenna using spiral-shaped configurations. The antenna has been designed by combining two configurations of microstrip and spiral with consideration of careful selection of the substrate material, the dimension of the rectangular microstrip, the distance between the turned spiral, and the number of turns of the spiral. The efficiency and accuracy have been improved using machine learning algorithms as well. Machine learning has been studied to model the proposed antenna based on the performance requirements, which requires a sufficient training data to improve the accuracy. Three different machine learning models are applied to improve the accuracy and generalization performance and compared to simulation and measurement results. Simulation, measurement, and machine learning results confirm that the proposed antenna is a new electrically small and operating over a wide range of high-frequency bands between 1 GHz–4 GHz. Machine learning models have the best prediction ability with a mean square error (MSE) of 0.03, and 0.05. The antenna structure and size are compatible and suitable for several multi-band wireless mobile systems operating in L-band and S-band. The results, such as directivity, Half-Power Beamwidth, Voltage Standing Wave Ratio (VSWR), and S-parameter curves, are analysed and compared with the numerical formulation for both spiral and microstrip antennas.

scholarly journals Assessing Continuous Operator Workload With a Hybrid Scaffolded Neuroergonomic Modeling Approach

2017 ◽  
Vol 59 (1) ◽  
pp. 134-146 ◽  
Author(s):  
Brett J. Borghetti ◽  
Joseph J. Giametta ◽  
Christina F. Rusnock
Keyword(s):  
Machine Learning ◽  
Adaptive Systems ◽  
Model Performance ◽  
Machine Learning Algorithms ◽  
Training Data ◽  
State Assessments ◽  
Learning Models ◽  
Dynamic Task ◽  
Operator Workload ◽  
Machine Learning Models

Objective: We aimed to predict operator workload from neurological data using statistical learning methods to fit neurological-to-state-assessment models. Background: Adaptive systems require real-time mental workload assessment to perform dynamic task allocations or operator augmentation as workload issues arise. Neuroergonomic measures have great potential for informing adaptive systems, and we combine these measures with models of task demand as well as information about critical events and performance to clarify the inherent ambiguity of interpretation. Method: We use machine learning algorithms on electroencephalogram (EEG) input to infer operator workload based upon Improved Performance Research Integration Tool workload model estimates. Results: Cross-participant models predict workload of other participants, statistically distinguishing between 62% of the workload changes. Machine learning models trained from Monte Carlo resampled workload profiles can be used in place of deterministic workload profiles for cross-participant modeling without incurring a significant decrease in machine learning model performance, suggesting that stochastic models can be used when limited training data are available. Conclusion: We employed a novel temporary scaffold of simulation-generated workload profile truth data during the model-fitting process. A continuous workload profile serves as the target to train our statistical machine learning models. Once trained, the workload profile scaffolding is removed and the trained model is used directly on neurophysiological data in future operator state assessments. Application: These modeling techniques demonstrate how to use neuroergonomic methods to develop operator state assessments, which can be employed in adaptive systems.

scholarly journals Effectiveness, Explainability and Reliability of Machine Meta-Learning Methods for Predicting Mortality in Patients with COVID-19: Results of the Brazilian COVID-19 Registry

2021 ◽  
Author(s):  
Bruno Barbosa Miranda de Paiva ◽  
Polianna Delfino Pereira ◽  
Claudio Moises Valiense de Andrade ◽  
Virginia Mara Reis Gomes ◽  
Maria Clara Pontello Barbosa Lima ◽  
...  
Keyword(s):  
Machine Learning ◽  
Prediction Models ◽  
State Of The Art ◽  
Laboratory Data ◽  
Machine Learning Algorithms ◽  
Training Data ◽  
Learning Models ◽  
Learning Methods ◽  
Meta Learning ◽  
Machine Learning Models

Objective: To provide a thorough comparative study among state ofthe art machine learning methods and statistical methods for determining in-hospital mortality in COVID 19 patients using data upon hospital admission; to study the reliability of the predictions of the most effective methods by correlating the probability of the outcome and the accuracy of the methods; to investigate how explainable are the predictions produced by the most effective methods. Materials and Methods: De-identified data were obtained from COVID 19 positive patients in 36 participating hospitals, from March 1 to September 30, 2020. Demographic, comorbidity, clinical presentation and laboratory data were used as training data to develop COVID 19 mortality prediction models. Multiple machine learning and traditional statistics models were trained on this prediction task using a folded cross validation procedure, from which we assessed performance and interpretability metrics. Results: The Stacking of machine learning models improved over the previous state of the art results by more than 26% in predicting the class of interest (death), achieving 87.1% of AUROC and macroF1 of 73.9%. We also show that some machine learning models can be very interpretable and reliable, yielding more accurate predictions while providing a good explanation for the why. Conclusion: The best results were obtained using the meta learning ensemble model Stacking. State of the art explainability techniques such as SHAP values can be used to draw useful insights into the patterns learned by machine-learning algorithms. Machine learning models can be more explainable than traditional statistics models while also yielding highly reliable predictions. Key words: COVID-19; prognosis; prediction model; machine learning

scholarly journals Bi-LSTM Sentiment Classifier for Climate Change Issues in South Korea

2019 ◽  
Vol 8 (2S6) ◽  
pp. 295-299
Keyword(s):  
Climate Change ◽  
Machine Learning ◽  
Big Data ◽  
South Korea ◽  
Sentiment Analysis ◽  
Training Data ◽  
Learning Models ◽  
Wide Range ◽  
Machine Learning Models ◽  
Big Data Technology

A sentiment analysis using SNS data can confirm various people’s thoughts. Thus an analysis using SNS can predict social problems and more accurately identify the complex causes of the problem. In addition, big data technology can identify SNS information that is generated in real time, allowing a wide range of people’s opinions to be understood without losing time. It can supplement traditional opinion surveys. The incumbent government mainly uses SNS to promote its policies. However, measures are needed to actively reflect SNS in the process of carrying out the policy. Therefore this paper developed a sentiment classifier that can identify public feelings on SNS about climate change. To that end, based on a dictionary formulated on the theme of climate change, we collected climate change SNS data for learning and tagged seven sentiments. Using training data, the sentiment classifier models were developed using machine learning models. The analysis showed that the Bi-LSTM model had the best performance than shallow models. It showed the highest accuracy (85.10%) in the seven sentiments classified, outperforming traditional machine learning (Naive Bayes and SVM) by approximately 34.53%p, and 7.14%p respectively. These findings substantiate the applicability of the proposed Bi-LSTM-based sentiment classifier to the analysis of sentiments relevant to diverse climate change issues.

Prediction of aircraft estimated time of arrival using machine learning methods

2021 ◽  
pp. 1-15
Author(s):  
O. Basturk ◽  
C. Cetek
Keyword(s):  
Machine Learning ◽  
Web Application ◽  
Absolute Error ◽  
Machine Learning Algorithms ◽  
Weather Data ◽  
Time Of Arrival ◽  
Learning Models ◽  
Trajectory Data ◽  
Different Sources ◽  
Machine Learning Models

ABSTRACT In this study, prediction of aircraft Estimated Time of Arrival (ETA) is proposed using machine learning algorithms. Accurate prediction of ETA is important for management of delay and air traffic flow, runway assignment, gate assignment, collaborative decision making (CDM), coordination of ground personnel and equipment, and optimisation of arrival sequence etc. Machine learning is able to learn from experience and make predictions with weak assumptions or no assumptions at all. In the proposed approach, general flight information, trajectory data and weather data were obtained from different sources in various formats. Raw data were converted to tidy data and inserted into a relational database. To obtain the features for training the machine learning models, the data were explored, cleaned and transformed into convenient features. New features were also derived from the available data. Random forests and deep neural networks were used to train the machine learning models. Both models can predict the ETA with a mean absolute error (MAE) less than 6min after departure, and less than 3min after terminal manoeuvring area (TMA) entrance. Additionally, a web application was developed to dynamically predict the ETA using proposed models.

scholarly journals Characterizing and Evaluating the Zoonotic Potential of Novel Viruses Discovered in Vampire Bats

Viruses ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 252
Author(s):  
Laura M. Bergner ◽  
Nardus Mollentze ◽  
Richard J. Orton ◽  
Carlos Tello ◽  
Alice Broos ◽  
...  
Keyword(s):  
Machine Learning ◽  
Phylogenetic Analyses ◽  
Human Infection ◽  
Machine Learning Algorithms ◽  
Zoonotic Potential ◽  
Metagenomic Sequencing ◽  
Learning Models ◽  
Sequencing Data ◽  
Vampire Bats ◽  
Machine Learning Models

The contemporary surge in metagenomic sequencing has transformed knowledge of viral diversity in wildlife. However, evaluating which newly discovered viruses pose sufficient risk of infecting humans to merit detailed laboratory characterization and surveillance remains largely speculative. Machine learning algorithms have been developed to address this imbalance by ranking the relative likelihood of human infection based on viral genome sequences, but are not yet routinely applied to viruses at the time of their discovery. Here, we characterized viral genomes detected through metagenomic sequencing of feces and saliva from common vampire bats (Desmodus rotundus) and used these data as a case study in evaluating zoonotic potential using molecular sequencing data. Of 58 detected viral families, including 17 which infect mammals, the only known zoonosis detected was rabies virus; however, additional genomes were detected from the families Hepeviridae, Coronaviridae, Reoviridae, Astroviridae and Picornaviridae, all of which contain human-infecting species. In phylogenetic analyses, novel vampire bat viruses most frequently grouped with other bat viruses that are not currently known to infect humans. In agreement, machine learning models built from only phylogenetic information ranked all novel viruses similarly, yielding little insight into zoonotic potential. In contrast, genome composition-based machine learning models estimated different levels of zoonotic potential, even for closely related viruses, categorizing one out of four detected hepeviruses and two out of three picornaviruses as having high priority for further research. We highlight the value of evaluating zoonotic potential beyond ad hoc consideration of phylogeny and provide surveillance recommendations for novel viruses in a wildlife host which has frequent contact with humans and domestic animals.

Model Comparison for Esp Run-Life Prediction: Classic Statistics Vs. Machine Learning

2021 ◽  
Author(s):  
Alejandro Celemín ◽  
Diego A. Estupiñan ◽  
Ricardo Nieto
Keyword(s):  
Machine Learning ◽  
Model Comparison ◽  
Proportional Hazards ◽  
Proportional Hazards Model ◽  
Machine Learning Algorithms ◽  
Slight Reduction ◽  
Learning Models ◽  
Validation Data ◽  
Operational Conditions ◽  
Machine Learning Models

Abstract Electrical Submersible Pumps reliability and run-life analysis has been extensively studied since its development. Current machine learning algorithms allow to correlate operational conditions to ESP run-life in order to generate predictions for active and new wells. Four machine learning models are compared to a linear proportional hazards model, used as a baseline for comparison purposes. Proper accuracy metrics for survival analysis problems are calculated on run-life predictions vs. actual values over training and validation data subsets. Results demonstrate that the baseline model is able to produce more consistent predictions with a slight reduction in its accuracy, compared to current machine learning models for small datasets. This study demonstrates that the quality of the date and it pre-processing supports the current shift from model-centric to data-centric approach to machine and deep learning problems.

Machine Learning Models for Finger Bend Evaluation using Implemented Low cost Flex Sensor

2021 ◽  
Vol 9 (VI) ◽  
pp. 3605-3611
Author(s):  
Pratyush Kaware
Keyword(s):  
Machine Learning ◽  
Support Vector Machine ◽  
Low Cost ◽  
Learning Algorithms ◽  
Cost Effective ◽  
Machine Learning Algorithms ◽  
Support Vector ◽  
Learning Models ◽  
Machine Learning Models

In this paper a cost-effective sensor has been implemented to read finger bend signals, by attaching the sensor to a finger, so as to classify them based on the degree of bent as well as the joint about which the finger was being bent. This was done by testing with various machine learning algorithms to get the most accurate and consistent classifier. Finally, we found that Support Vector Machine was the best algorithm suited to classify our data, using we were able predict live state of a finger, i.e., the degree of bent and the joints involved. The live voltage values from the sensor were transmitted using a NodeMCU micro-controller which were converted to digital and uploaded on a database for analysis.

scholarly journals Comparison of the Performance of Machine Learning Algorithms in Predicting Heart Disease

2021 ◽  
Vol 10 (1) ◽  
pp. 99
Author(s):  
Sajad Yousefi
Keyword(s):  
Machine Learning ◽  
Logistic Regression ◽  
Heart Disease ◽  
Decision Tree ◽  
Roc Curve ◽  
Machine Learning Algorithms ◽  
Supervised Machine Learning ◽  
Learning Models ◽  
Algorithm Performance ◽  
Machine Learning Models

Introduction: Heart disease is often associated with conditions such as clogged arteries due to the sediment accumulation which causes chest pain and heart attack. Many people die due to the heart disease annually. Most countries have a shortage of cardiovascular specialists and thus, a significant percentage of misdiagnosis occurs. Hence, predicting this disease is a serious issue. Using machine learning models performed on multidimensional dataset, this article aims to find the most efficient and accurate machine learning models for disease prediction.Material and Methods: Several algorithms were utilized to predict heart disease among which Decision Tree, Random Forest and KNN supervised machine learning are highly mentioned. The algorithms are applied to the dataset taken from the UCI repository including 294 samples. The dataset includes heart disease features. To enhance the algorithm performance, these features are analyzed, the feature importance scores and cross validation are considered.Results: The algorithm performance is compared with each other, so that performance based on ROC curve and some criteria such as accuracy, precision, sensitivity and F1 score were evaluated for each model. As a result of evaluation, Accuracy, AUC ROC are 83% and 99% respectively for Decision Tree algorithm. Logistic Regression algorithm with accuracy and AUC ROC are 88% and 91% respectively has better performance than other algorithms. Therefore, these techniques can be useful for physicians to predict heart disease patients and prescribe them correctly.Conclusion: Machine learning technique can be used in medicine for analyzing the related data collections to a disease and its prediction. The area under the ROC curve and evaluating criteria related to a number of classifying algorithms of machine learning to evaluate heart disease and indeed, the prediction of heart disease is compared to determine the most appropriate classification. As a result of evaluation, better performance was observed in both Decision Tree and Logistic Regression models.

scholarly journals A Physics-Infused Deep Learning Model for the Prediction of Refractive Indices and Its Use for the Large-Scale Screening of Organic Compound Space

2019 ◽  
Author(s):  
Mojtaba Haghighatlari ◽  
Gaurav Vishwakarma ◽  
Mohammad Atif Faiz Afzal ◽  
Johannes Hachmann
Keyword(s):  
Machine Learning ◽  
Deep Learning ◽  
Large Scale ◽  
Organic Molecules ◽  
Learning Model ◽  
Training Data ◽  
Refractive Indices ◽  
Learning Models ◽  
Deep Learning Model ◽  
Machine Learning Models

<div><div><div><p>We present a multitask, physics-infused deep learning model to accurately and efficiently predict refractive indices (RIs) of organic molecules, and we apply it to a library of 1.5 million compounds. We show that it outperforms earlier machine learning models by a significant margin, and that incorporating known physics into data-derived models provides valuable guardrails. Using a transfer learning approach, we augment the model to reproduce results consistent with higher-level computational chemistry training data, but with a considerably reduced number of corresponding calculations. Prediction errors of machine learning models are typically smallest for commonly observed target property values, consistent with the distribution of the training data. However, since our goal is to identify candidates with unusually large RI values, we propose a strategy to boost the performance of our model in the remoter areas of the RI distribution: We bias the model with respect to the under-represented classes of molecules that have values in the high-RI regime. By adopting a metric popular in web search engines, we evaluate our effectiveness in ranking top candidates. We confirm that the models developed in this study can reliably predict the RIs of the top 1,000 compounds, and are thus able to capture their ranking. We believe that this is the first study to develop a data-derived model that ensures the reliability of RI predictions by model augmentation in the extrapolation region on such a large scale. These results underscore the tremendous potential of machine learning in facilitating molecular (hyper)screening approaches on a massive scale and in accelerating the discovery of new compounds and materials, such as organic molecules with high-RI for applications in opto-electronics.</p></div></div></div>

scholarly journals Predicting Electric Vehicle Charging Station Availability Using Ensemble Machine Learning

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7834
Author(s):  
Christopher Hecht ◽  
Jan Figgener ◽  
Dirk Uwe Sauer
Keyword(s):  
Machine Learning ◽  
Binary Data ◽  
Training Data ◽  
Gradient Boosting ◽  
Traffic Density ◽  
Learning Models ◽  
Charging Infrastructure ◽  
Ensemble Models ◽  
Charging Station ◽  
Machine Learning Models

Electric vehicles may reduce greenhouse gas emissions from individual mobility. Due to the long charging times, accurate planning is necessary, for which the availability of charging infrastructure must be known. In this paper, we show how the occupation status of charging infrastructure can be predicted for the next day using machine learning models— Gradient Boosting Classifier and Random Forest Classifier. Since both are ensemble models, binary training data (occupied vs. available) can be used to provide a certainty measure for predictions. The prediction may be used to adapt prices in a high-load scenario, predict grid stress, or forecast available power for smart or bidirectional charging. The models were chosen based on an evaluation of 13 different, typically used machine learning models. We show that it is necessary to know past charging station usage in order to predict future usage. Other features such as traffic density or weather have a limited effect. We show that a Gradient Boosting Classifier achieves 94.8% accuracy and a Matthews correlation coefficient of 0.838, making ensemble models a suitable tool. We further demonstrate how a model trained on binary data can perform non-binary predictions to give predictions in the categories “low likelihood” to “high likelihood”.

Sign in / Sign up

Export Citation Format

Share Document