scholarly journals Effect of Replacement Levels of Wheat Flour on the Physicochemical and Sensory Properties of Smoke- Dried Sausage

2020 ◽  
pp. 17-24
Author(s):  
I. Iwanegbe ◽  
I. G. Omonigho

In the olden days, there was no refrigeration for meat preservation and sausage making was a way to solve this problem. Sausage making evolved as an effort to economize and preserve meat which could not be consumed immediately after slaughter. This study evaluated the effect of replacement levels of wheat flour on the physicochemical characteristics and sensory qualities of smoke-dried sausage. Beef, wheat flour, sodium chloride, seasonings (Table 1) were bought, pre-processing operations were carried out. Sausage was processed by adding wheat flour, seasonings, salt to minced meat at different replacement levels (5%, 10% and 15%) with 0% as control and later smoke-dried. Sensory evaluation and physicochemical properties were determined. Data generated were analyzed. The results from sensory evaluation showed that Product A had the highest response (5.00) to sausage colour. Product A (5.00), B (5.00) and C (4.90) had the highest response for product juiciness. Product A (5.00) and product B (5.00) had better response to taste. For overall acceptability, Product A (5.00) was not different from other products. The addition of wheat flour resulted in higher and greater elasticity and increased acceptability due to higher scores for texture and colour. The protein content showed that Product D (56.33%) had the lowest value, followed by Product B (58.23%), next was Product C (59.57%), and the highest was observed in Product A (60.42%). Product C had the highest value for potassium and phosphorus (122.0 mg/100g and 13.40 mg/100g). Product B and C had the same value (6.17) for pH, next was product A (6.13), the least pH was observed in Product D (6.07). Sausage manufacture is a means of adding value to off-cuts and thereby increasing the utilization of meat. The incorporation of 10% wheat flour to sausage is highly nutritive with better sensory qualities and better economic value.

Author(s):  
Mekala Mounika ◽  
T. V. Hymavathi ◽  
Kuna Aparna ◽  
M. Sreedhar

In this study, the development and physicochemical of MMFM (minor millet flour mix) and sensory qualities of  MMFM chapathis (unleavened Indian flatbread) were evaluated at different proportions. Flour mixes were developed blending of minor millet flour and Nutri-cereals flours with wheat flour in different rations V1(75:25:0) (Millets: Other grains: Wheat flour), V2(60:25:15) V3 (50:25:25) V4(45:25:30), V5(30:25:45) V6(0: 75: 25) V7(100) and V8 (100 without gums) respectively and 100% wheat flour used as control. The functional properties of flours mixes were tested and results revealed that swelling capacity, water absorption capacity, oil absorption capacity, gelatinization temperature, water retention capacity and bulk density were increased with an increase in the incorporation of other flours with wheat flour. Further, the color values of millet-based chapathis showed significant changes when the level of millet flour substitution was increased. The L* and b* values decreased while a* value increased. Regarding sensory properties, control wheat chapathis had better acceptability than the composite chapathis. Sensory evaluation revealed that overall acceptability for millet and nutricereals flour-based chapathis was awarded the highest score for V6 followed by V5, V4, and V3 as compared to control Chapathi. All chapathis were coinciding the range of ‘like moderately’ to ‘like very much’ for control chapathis while ‘like slightly’ to like moderately’ for experimental chapathis. Based on the generated results, novel chapathis could be formulated by substituting wheat with more than 50% flour.


Author(s):  
Adriana PĂUCEAN ◽  
Simona MAN ◽  
Sevastiţa MUSTE ◽  
Anamaria POP ◽  
Simona CHIȘ ◽  
...  

The aim of this investigation was to incorporate mustard flour into bread in order to improve its quality. For this purpose, wheat flour 650 type for bread making was replaced with mustard seed flour at the level of 5, 7 and 10%. Bread quality through physico-chemical and sensory characteristics was analyzed and compared to those of bread without mustard flour. The protein content of mustard flour bread increased with 5.03% as a result of mustard flour incorporation, coupled with an increase in ash content. Sensory evaluation results revealed that the sample containing 7% mustard flour scored highest in most of the attributes including overall acceptability. The study reveals that incorporation of 7% mustard flour gave desirable results in terms of phisyco-chemical and sensory caracteristics of mustard flour fortified bread.


Author(s):  
DB Nepali Karki ◽  
NP Roxas ◽  
Cessar C Sevilla ◽  
Romeo B Obedoza ◽  
VL Barraquio

A study was carried out from 1st July to 21st October 2003 at the Institute of Animal Science (IAS), University of the Philippines, Los Baños, College Laguna, Philippines. The study was based on the overall acceptability of substitution of sodium chloride by potassium chloride, frankfurters of broiler chicken and buffalo meat, which were prepared with or without garlic at 1:1 ratio. Frankfurters stored in chiller for over-night after the preparation (as fresh) and stored in freezer (-5 to -7°C) were taken out at 45 and 75 days for sensory evaluation. Ten experienced panelists were involved to evaluate sensory characteristics of frankfurters. Required amount of franks were cut into approximately 2.5 cm size and heated in microwave before serving to the panelists after randomly coding. Each panelist was served with four randomly allocated samples such that in each replication (block), two panelists were assigned. Juiciness, tenderness, color, flavor, off-flavor and overall acceptability were evaluated using the seven point Hedonic scale score card. Type of meat used and the storage period had significant influence in some of the sensory traits, such as juiciness, tenderness and color. Scores for juiciness and tenderness were significantly (P>0.05) higher with chicken franks. However, highly significant (P>0.01) difference was observed for color, favoring buffalo meat franks. Traits such as flavor and overall acceptability had higher scores for chicken than buffalo meat, although scores for offflavor had opposite values; higher with chicken, but was not significantly different. Sensory characteristics for stored products were scored lower than fresh. Color was influenced significantly (P>0.05) by meat type, salt, garlic and also storage period of 75 days. Meat type and storage interaction had significant (P>0.05) differences on juiciness, overall acceptability and tenderness. However, their effects as individual variable were not significant. When garlic was used at 2% level in combination with NaCl+KCl at 1:1 ratio the effectiveness was more pronounced from all respects. However, same percentage of garlic could not produce more acceptable franks with sodium chloride alone. All sensory parameters considered in the study were scored less either for 45 or 75 days storage than the fresh. However, statistically; except for off-flavor, no significant differences were observed between 45 and 75 days. Key words: Frankfurter, substitution, sensory evaluation, panelist, Hedonic scale, garlic J. Inst. Agric. Anim. Sci. 26:57-64 (2005)


Food Research ◽  
2020 ◽  
Vol 4 (5) ◽  
pp. 1545-1553
Author(s):  
L.-H. Ho ◽  
S.R.R. Irisha Yasmira ◽  
Norlia M.

Consuming of foods high in calories is often associated with higher risks for obesity. This has increased the consumer demand for the food products that promise health benefits. The aim of this study was to evaluate the proximate composition, physicochemical properties, and sensory attributes of reduced-calorie belimbi fruit jam with maltitol. Two formulations of belimbi fruit jams were prepared using sucrose as a reference food (i.e. BJSUC) or maltitol (i.e. BJMAL). The proximate composition, biochemical analysis, texture profile analysis, and sensory evaluation of the produced fruit jams were conducted. The obtained results of BJSUC and BJMAL were compared using unpaired Student’s ttest. The moisture content of BJMAL (76.58%) was significantly (P<0.05) higher than the BJSUC (66.41%). There was a reduction in carbohydrate and caloric values for belimbi fruit jam prepared using maltitol (22.19% and 96.43 kcal, respectively) as compared with belimbi fruit jam prepared using sucrose (32.91% and 136.09 kcal, respectively). However, belimbi fruit jam prepared without sucrose (i.e. BJMAL) did not affect to the ash (0.27%), crude protein (0.39%), crude fat (0.55%), and crude fiber (1.95%) contents, as well as for pH value (3.05), water activity (0.80), and vitamin C (22.90 mg/100 g) contents. BJMAL showed a significant (P<0.05) lower total soluble solids (66°Brix) and total titratable acid (0.09%) than BJSUC. BJMAL had lower firmness value and easy to spread than the BJSUC. The overall acceptability of BJMAL by panellists was comparable to the BJSUC, both fruit jams received scores higher than 5. The reducedcalorie belimbi fruit jam can be prepared by using maltitol.


2018 ◽  
Vol 55 (3) ◽  
pp. 308
Author(s):  
Radhika D. Prabhu ◽  
C. Usha Devi ◽  
R. Navaneetha

Value addition of foods is of current interest because of increasing nutritional awareness among consumers. Adolescents’ protein requirements are high and hence value addition using millets is one way to meet the protein needs particularly through baked foods. An investigation was undertaken to develop protein rich nutri bites. Standardization trials indicated that incorporation of 10% jowar,5% bajra,10% foxtail millet,10% whole wheat flour,5% refined wheat flour, 20% groundnuts,10% almonds,5% chia seeds,5% watermelon seeds,5% whey protein,10% butter and 5% spices was highly accepted. The present study aimed at sensory evaluation, proximate analysis and shelf life study of the protein rich nutri bites (value added baked snack).The products were subjected to sensory evaluation by 25 semi trained panelists. Sensory qualities included appearance, colour, texture, taste, odour and overall acceptability. A 9-point hedonic rating scale was used. There was no statistical significant (p&gt;0.05) difference with respect to texture and overall acceptability. The developed product contained 2.91% moisture, 19.8g protein, 20.06g fat, 1.65g total fiber, 2.9g ash, 51.9g carbohydrate and 422.02kcal energy per 100g on dry weight basis with a shelf life of 15-30 days. In adolescents this would replace junk food and also prevent overeating as it provides satiety. It is also useful for fitness enthusiasts as protein helps in building muscles.


2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Warinporn Klunklin ◽  
Geoffrey Savage

Purple rice flour contains high levels of a number of antioxidant compounds; however, it has seldom been used as an ingredient in bakery products. The aim was to increase the nutritional value of biscuits by adding purple rice flour to a basic wheat flour biscuit. The substitution of purple rice flour in place of wheat flour modified the characteristics of the biscuits in terms of increasing the nutritional values. They contained high fiber, antioxidants, and antioxidant activities, while slightly changing the physical properties such as hardness and spread ratio. The study showed that the protein digestibility increased as the content of the purple rice flour was increased in the biscuit mix. The 100% purple rice flour biscuits had the lowest predicted glycemic index (pGI) of all the biscuits. Sensory analysis showed that the overall acceptability of the blended flour biscuits at 25 and 50% substitution levels was slightly less than that of the control biscuits with only 9%; however, the scores were above 5 which means the panelists still liked the biscuits a lot. Overall, the inclusion of purple rice flour in biscuits mix increased crude protein content, protein digestibility, and bioactive compounds with acceptable sensory scores from consumers up to 50% substitution of purple rice.


2019 ◽  
Author(s):  
Olusegun D. Oshibanjo ◽  
Odion O. Ikhimiukor

AbstractThis study evaluates the effects of partial, combined or total replacement of NaCl on microbial load, sensory evaluation and physical properties of beef sausage. Beef sausage was prepared (g/100g: beef 65.0, corn flour 10.0, oil 10.0, soya bean, wet and dry spice 15.0). Sodium chloride (SC) was replaced with potassium chloride (PC), potassium lactate (PL) or calcium ascorbate (CA) at 25%, 50% and 100%, and then stored for 15 days in a factorial arrangement in complete randomized design. Sausages were subjected to microbial load, sensory evaluation and pH, cooking yield and cooking loss using standard procedure. Data were analysed using descriptive statistic and ANOVA at α0.05. The microbial load was generally lower. The pH increased with storage time. The cooking yield was significantly higher in salt combination of 50% SC and CA each at storage day 5 with least cooking loss at same storage day. The most preferred sausage colour was obtained with a salt combination of 50% SC and CA each with least colour in a salt combination of 50% SC, 25% PL and). In tenderness, a salt combination of 50% of both SC and CA was significantly tender with least tenderness in 100% PL total replacement. The panelists rated salt combination of 50% SC and CA as the most overall accepted salt combination than others salt combination. Sodium chloride replacement with Calcium Ascorbate at 50% enhanced the most preferred sausage for overall acceptability and aerobic bacteria count lower than the international standard limit.Summary statementHigh intake of sodium chloride had been seen as one of the main contributing factors in the development of specific, non-transmittable diseases, such as, high blood pressure and related secondary such as cardiovascular disease. The use of other derivative of salt is therefore needed. This study evaluates the effects of partial, combined or total replacement of NaCl on microbial load, sensory evaluation and physical properties of beef sausage.


2019 ◽  
Vol 7 (4.14) ◽  
pp. 253
Author(s):  
Syarifah Khadijah Syed Abu Bakar ◽  
Noorlaila Ahmad ◽  
Fadhilah Jailani

Banana peels consist of valuable bioactive compounds and yet remain underutilised. This study investigated the effect of banana peel flour incorporation into biscuit formulation. The physicochemical properties and sensorial acceptability of biscuits produced at the different level of substitution (0%, 10%, 20%, 30% and 40%) of Banana Peel Flour (BPF) were determined. The ash content (1.66% to 2.11%), moisture content (2.13% to 2.66%), fat content (24.2% to 30.7%) and total dietary fiber content (1.83 g/100g to 4.70 g/100g) in biscuits increased when the level of BPF substitution increased. The texture analysis demonstrated that BPF-containing biscuits had significantly higher value in hardness (1071.15 to 1300.61g) than control biscuit (992.69 g). İn contrast, the study showed a significant decrease in fracturability, lightness, width and height as the concentration of BPF increased. Sensory evaluation indicated that biscuit incorporated with BPF up to 20% level did not affect the appearance, taste, texture and overall acceptability ratings by the panelists. İn conclusion, BPF can be used as a functional ingredient and partially substituted wheat flour in biscuit production. 


2017 ◽  
Vol 1 ◽  
pp. 365
Author(s):  
O. A. Idowu, A. O. Akinsola

The study was carried out to determine the effectiveness of heat processing on jackbeans, an underutilized legume. Raw and processed seed flour (roasted at 1200C for 10mins and pressure cooked for 10mins) produced from jackbeans were evaluated for its nutritional quality and antinutritional factors using standard methods. The nutritional qualities determined showed that sample with 20% pressure cooked jackbeans flour supplement has the highest amount of protein, fat, fibre and ash content, while the sample with 40% supplementation of pressure cooked jackbeans flour has the highest percentage of moisture content. The cookies produced from 100% wheat flour has the highest percentage of carbohydrate, while sample with 40% roasted jackbeans flour supplement has the highest percentage of concanavanine A. The antinutritional factors of the processed flours were found to be lower than the raw seed flour. Sensory qualities determined showed that sample with 20% of pressure cooked jackbeans supplement was rated high in terms of taste, aroma, texture, and overall acceptability, while cookies with 100% wheat flour was rated high 7.7 in term of colour. This study showed that thermal processing especially pressure cooking decreased the antinutritional contents of the jackbeans flour than other processing methods used.


2017 ◽  
Vol 12 (3) ◽  
pp. 129 ◽  
Author(s):  
NFN Widaningrum ◽  
Ermi Sukasih ◽  
Endang Yuli Purwani

<p>Tempe is a traditional fermented food in Indonesia and it is mainly made from soybean. There is imbalance between demand and supply of soybean for tempe production. Consequently, it has forced Indonesia to import large quantity of soybean to meet the local demand. In term of reducing soybean import, efforts must be done to substitute soybean with other local beans. Of one among many beans, jack bean (Canavalia ensiformis) had potency to be developed as material for making tempe. The objective of this research was to study physicochemical characteristics of jackbean tempe and did sensory evaluation. Soaking, drying, dehulling and splitting were applied prior to fermentation. Treatment done was fermentation time (12, 24, 36 and 48 hours). Value of pH, total count, and soluble protein were measured during fermentation process. The fungus grew well and jackbean cake tempe with dense mycelial growth was completely formed after 36 hrs of fermentation period. Soluble protein increased significantly from 0,24-0,26 mg/g during fermention period, indicating that highly active proteolytic enzyme might exist. Sensory evaluation results showed that in the form of fried tempe, sensory properties of jackbean tempe was equivalent to soybean tempe, especially/particulary in terms of color, flavor, acidity, texture and overall acceptability. The results were significant to reduce dependency on soybean import by substituting it in the tempe production in Indonesia</p><p> </p><p><strong>KAJIAN AWAL PENGOLAHAN KACANG KORO PEDANG (<em>CANAVALIA ENSIFORMIS</em>) TERFERMENTASI</strong></p><p>Tempe merupakan makanan fermentasi tradisional di Indonesia yang utamanya terbuat dari kedelai. Ada ketidakseimbangan antara permintaan dan pasokan kedelai untuk produksi tempe. Akibatnya, Indonesia terpaksa mengimpor kedelai dalam jumlah besar untuk memenuhi permintaan lokal. Dalam rangka mengurangi impor kedelai, perlu dilakukan upaya untuk mengganti kedelai dengan kacangkacangan lokal. Kacang yang memiliki potensi untuk dijadikan bahan baku tempe yaitu kacang koro pedang (<em>Canavalia ensiformis</em>). Tujuan penelitian ini yaitu mempelajari sifat fisik, kimia dan sensori tempe yang dibuat dari kacang koro pedang. Perlakuan yang diterapkan yaitu waktu fermentasi (12, 24, 36 dan 48 jam). Parameter pengamatan yang diukur yaitu pH, total mikroba dan protein terlarut. Hasil penelitian menunjukkan bahwa kacang koro pedang cocok untuk produksi tempe. Ragi tumbuh dengan baik dengan pertumbuhan miselium padat terbentuk setelah 36 jam periode fermentasi pada tempe koro pedang. Protein terlarut meningkat secara signifikan dari 0,24 sampai 2,60 mg/g selama periode fermentasi, menunjukkan bahwa terdapat aktivitas aktif enzim proteolitik. Hasil analisis sensori memperlihatkan bahwa tempe koro pedang setara dengan tempe kedelai, terutama dalam hal warna, aroma, keasaman, tekstur, dan daya terima khususnya pada tempe yang disajikan setelah digoreng. Penggunaan koro pedang sebagai bahan baku tempe cukup signifikan untuk mengurangi ketergantungan pada impor kedelai dengan menggantikannya dalam produksi tempe di Indonesia.</p>


Sign in / Sign up

Export Citation Format

Share Document