СТРАТЕГІЯ РОЗВИТКУ ЯК КЛЮЧОВИЙ ФАКТОР ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ ДІЯЛЬНОСТІ УНІВЕРСИТЕТУ

The article seeks to search for new pathways to increase the performance efficiency of higher education institutions. In particular, it is argued that the key point in shaping a new role of universities in society, which assumes building a development strategy, is the idea of a "technological mode". The social innovation process paradigm is being realized through technological change accompanied by the emergence of products with new functional properties to meet new demands. The role of higher education institutions within a certain technological mode is not limited to traditional issues of workforce training for the economy, it should be also focused towards developing organizational and economic innovations to reduce the implementation cycle and building an innovation-driven management system in an organization. Modern universities not only maintain but also expand their role in the transition to the sixth technological mode of the economy, as they are viewed as the few institutional societal structures that are capable to build relevant competencies for a successive technological mode in the process of their educational, research and innovative activities. The paradigm to enhance the research potential of universities should rely upon a fundamentally new development strategy for higher education institutions which can ensure their active participation in the new technological mode on a regular, sustainable basis and thus realize the new role of universities in society. Insights into development strategies of domestic universities have revealed that on the whole they are quite typical consisting of following sections: general provisions, mission, strategic goal and objectives of university development, program activities and stages of their implementation, financial support for the program; expected outcomes and program implementation risks. The research findings on higher education practices in Ukraine demonstrate that they are based on competitive strategies which are viewed as a set of actions to meet the overall goals of HEIs with due regard to education and labour market demands. It is argued that a robust development strategy and its consistent implementation might become a driving factor to boost the efficiency of higher education institutions.

СТРАТЕГІЯ РОЗВИТКУ ЯК КЛЮЧОВИЙ ФАКТОР ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ ДІЯЛЬНОСТІ УНІВЕРСИТЕТУ

The article seeks to search for new pathways to increase the performance efficiency of higher education institutions. In particular, it is argued that the key point in shaping a new role of universities in society, which assumes building a development strategy, is the idea of a "technological mode". The social innovation process paradigm is being realized through technological change accompanied by the emergence of products with new functional properties to meet new demands. The role of higher education institutions within a certain technological mode is not limited to traditional issues of workforce training for the economy, it should be also focused towards developing organizational and economic innovations to reduce the implementation cycle and building an innovation-driven management system in an organization. Modern universities not only maintain but also expand their role in the transition to the sixth technological mode of the economy, as they are viewed as the few institutional societal structures that are capable to build relevant competencies for a successive technological mode in the process of their educational, research and innovative activities. The paradigm to enhance the research potential of universities should rely upon a fundamentally new development strategy for higher education institutions which can ensure their active participation in the new technological mode on a regular, sustainable basis and thus realize the new role of universities in society. Insights into development strategies of domestic universities have revealed that on the whole they are quite typical consisting of following sections: general provisions, mission, strategic goal and objectives of university development, program activities and stages of their implementation, financial support for the program; expected outcomes and program implementation risks. The research findings on higher education practices in Ukraine demonstrate that they are based on competitive strategies which are viewed as a set of actions to meet the overall goals of HEIs with due regard to education and labour market demands. It is argued that a robust development strategy and its consistent implementation might become a driving factor to boost the efficiency of higher education institutions.

Assessment of the impact of chemical pollution of ferrous metallurgy enterprises on forests using satellite photographs

The considered operating ferrous metallurgy enterprise uses three different technological modes of steel smelting, each of which is characterized by an individual composition of the ingredients of chemical pollutant emissions into the atmosphere affecting the state of the forest areas around this enterprise. Based on the decoding of satellite pixel photographs of forest areas, the technological mode with the least impact on forest areas was determined. It corresponds to the condition of the minimum area of ecological zones around the ferrous metallurgy enterprise. The authors propose an assessment of the impact of chemical pollution of ferrous metallurgy enterprises on forests in the form of areas of ecological zones of the state of forest vegetation and the volume of biomass in its various parts. The mosaic of ecological zones of forest areas is determined from their satellite pixel photographs using an original algorithm of “controlled cluster analysis”. The main recommendation for ferrous metallurgy enterprises to choose one of several alternative technological modes is as follows: the choice of technological mode should be based on a comparison of sizes of the areas of ecological zones. In this case, the technological mode with the smallest dimensions of the area is selected. Assessment of the damage caused by the chemical pollution of the plant to forest areas was determined by the area of ecological zones and the volume of biomass loss in forest areas in comparison with the background areas. The boundaries of ecological zones can be determined according to the “dose-effect” dependencies typical for the considered region.

Research of the reliability of a robotic assembly based on the effect of rotation and low-frequency vibrations

Using various physical and technical effects in automatic assembly is a promising tendency to increase the technological reliability of the assembly process. The article presents a method for robotic assembly of cylindrical joints using the effect of rotational motion and low-frequency vibrations. The effect can be achieved by using low-frequency vibrations of the base part with the help of a vibrating device and the rotational movement of the installed part with the help of the rotational movement of the robot out-put link. The paper presented a mathematical model of the dynamics of the robotic assembly process of cylindrical joints. Experiments were set up and carried out to test the effectiveness of the proposed assembly method. The research results affirmed that with a rational technological mode of the robotic assembly process using the effect of rotation and low-frequency vibrations, the probability of jamming is completely eliminated and the assembly force is significantly reduced.

Analysis of the effectiveness of dual injection at Kalamkas field

The article analyzes the results of pilot field tests and the technological assessment of the introduction of technology for simultaneous and separate injection at Kalamkas field of Mangystaumunaigas JSC. The functional tasks of simultaneous-separate injection and the requirements for the technical conditions of the equipment used for transfer to simultaneous-separate injection are considered A relevant and significant point in the implementation of technology for simultaneous-separate injection is that the injection into two layers is carried out through one wellbore using special equipment, the main element of which is a packer that separates the layers from each other and provides the possibility of operating each of them in accordance with the specified technological mode.

Simulation of the electron beam welding process of a bimetallic ring by means of ANSYS

The article is devoted to modeling the process of electron beam welding in the manufacture of electric motors with a bimetallic ring used in biofuel preparation reactors. The main problem at the current stage of production is the choice of the technological mode of welding and the repeatability of the result. In this work, the authors simulate the welding of electric motors with a bimetallic ring under various technological modes in the ANSYS simulation environment in the process of electron beam welding. The result of the work will be a graphical representation of the temperature distribution on the surface of the product at various values of the technological parameters (electron beam current, welding speed and welding process time). Today, the choice of modes for a new technological process is carried out experimentally, which entails high material costs. The approach proposed by the authors allows, with minimal time and material costs, to select a technological mode for welding products from new alloys.

A CONCEPTUAL APPROACH TO MANAGING THE PROCESS OF TRANSITION OF ORGANIZATIONS TO WORK IN THE CONDITIONS OF THE EIGHTH TECHNOLOGICAL ORDER

The subject of the article is the development of a concept for the transition of organizations to the eighth technological mode; the object of the article is the eighth technological mode; the purpose of the work is to increase the efficiency of the processes of transition of organizations to the eighth technological mode; to achieve this goal, the following tasks are solved: the geopolitical and socio-economic roles and results of the transition of organizations to the eighth technological mode are described; a system analysis of technological modes is carried out (tables of elements and properties of technological modes are developed); - development and description of practical tasks of the policy of transition of organizations to the eighth technological order; the structure of the policy and the content of the elements of the policy of transition to the eighth technological order are described; the criteria for evaluating the effectiveness of the policy of transition of organizations to the eighth technological order are given; the scientific methods of this article are system, historical, logical and comparative analysis, heuristic synthesis, political science, system approach, heuristic forecasting, expert methods, efficiency theory; the scientific novelty of the work is determined by the synthesis of the policy of transition of organizations to the eighth technological order, the formation of a set of criteria for assessing the geopolitical and socio-economic effectiveness of the policy of organizations for the transition to the eighth technological order

THE MISSION AND ESSENCE OF THE THEORY OF TECHNOLOGICAL ORDERS

the subject of the article is the mission and essence of the theory of technological orders; the object of the article is the process of technological development of the economy and society; the purpose of the work is to increase the efficiency of the processes of formation of the sixth technological structure in the economy and society.; description of the methods of modernization of enterprises ' products during the transition to the sixth technological mode; description of the scientific and practical significance of the general theory of technological modes; scientific methods in this article are the methodology and philosophy of science, logic, system analysis, synthesis, system approach, functional-decomposition representation of complex technological systems, forecasting, expert methods; scientific novelty of the work is associated with the development of the methodology of the general theory of technological modes and the description of the scientific and practical significance of this general theory.

Mathematical model of technological mode on-line control at blade processing

There are formed regression models defining micro-geometrical parameters correlation of the surface obtained as a result of turning and milling with technological modes, mechanical characteristics of structural material and thermal-physical parameters of materials of the “blank-tool tip” contact pair. A comparative analysis of adequacy and accuracy of design dependences used for technological pre-production and formation of the systems for machining adaptive control in digital production systems.

THE METHOD OF OBTAINING CAROTENOID-CONTAINING DYE AND FOOD ADDITIVES

Introduction. The developed technology for obtaining natural dye is based on the physical process of formation of phase separation observed in the juice space of some vegetables and melons. The technological mode is selected in such a way as to preserve the biological active substances available in the cheese as much as possible. The process of phase separation in the juice space is scientifically justified. It is shown that the resulting natural dye, carrot flour, and transparent juice are applicable in the food industry. In order to widely apply the developed dye production technology, the juice phase separator plant was created. Spectroscopic studies have established that the main coloring pigment of carrot dye is β-carotene.