Production of potable water from Gomti River by using modified double slope solar still with external mounted reflectors

Solar Energy ◽  
2020 ◽  
Vol 209 ◽  
pp. 576-589
Author(s):  
Suresh Kumar Patel ◽  
Brajesh Kumar ◽  
Piyush Pal ◽  
Rahul Dev ◽  
Dhananjay Singh
2014 ◽  
Vol 592-594 ◽  
pp. 2409-2415 ◽  
Author(s):  
S. Naga Sarada ◽  
Banoth Hima Bindu ◽  
Sri Rama R. Devi ◽  
Ravi Gugulothu

In recent years with the exacerbation of energy shortage, water crisis increases around the world. With the continuous increase in the level of greenhouse gas emissions, the use of various sources of renewable energy is increasingly becoming important for sustainable development. Due to the rising oil price and environmental regulations, the demand of utilizing alternative power sources increased dramatically. Alternative energy and its applications have been heavily studied for the last decade. Energy and water are essential for mankind that influences the socioeconomic development of any nation. Pure water resources become more and more scarce every day as rivers, lakes wells and even seawater pollution rapidly increases. Solar energy is one promising solution to secure power and potable water to future generation. The process of distillation can be used to obtain fresh water from salty, brackish or contaminated water. Water is available in different forms such as sea water, underground water, surface water and atmospheric water. Clean water is essential for good health. The search for sustainable energy resources has emerged as one of the most significant and universal concerns in the 21st century. Solar energy conversion offers a cost effective alternative to our traditional usages. Solar energy is a promising candidate in many applications. Among the alternative energy sources used for electricity production, wind and solar energy systems have become more attractive in recent years. For areas where electricity was not available, stand alone wind and solar systems have been increasingly used. The shortage of drinking water in many countries throughout the world is a serious problem. Humankind has depended for ages on river, sea water and underground water reservoirs for its fresh water needs. But these sources do not always prove to be useful due to the presence of excessive salinity in the water. To resolve this crisis, different methods of solar desalination have been used in many countries. Distillation is a well known thermal process for water purification, most importantly, water desalination. Most of the conventional water distillation processes are highly energy consuming and require fossil fuels as well as electric power for their operation. Single basin solar still is a popular solar device used for converting available brackish or waste water into potable water. Because of its lower productivity, it is not popularly used. Numbers of works are under taken to improve the productivity and efficiency of the solar still. There are large numbers of PCMs that melt and solidify at wide range of temperatures, making them attractive in a number of applications. PCMs have been widely used in latent heat thermal storage systems for heat pumps, solar engineering and spacecraft thermal control applications. The use of PCMs for heating and cooling applications for buildings has been investigated within the past decade. The experimental results computed in the field of water distillation process using solar energy in the presence of energy storage materials sodium sulphate and sodium acetate are discussed in this paper. Keywords: solar energy, saline water, distillation, phase change material.


Author(s):  
Onkar Joshi

Water is essential to life. The origin and continuation of mankind is based on water. The supply of drinking water is an important problem for the developing countries. The wooden box has a thickness of 8mm. It consists of a top cover of transparent glass with a tilt of 18°, 26° and is coated with black paint to absorb the maximum possible solar energy. The yield of the single basin solar still is very less and it increases considerably when the solar still was built with copper sheet. An analysis of single slope solar still has done on different tilt angle to optimizing study of tilt angle. They greatly improve the rate of evaporation and the rate of condensation on the cooler surface. The efficiency is higher for solar still made up of copper sheet and its output we have got 1.24 for 18° angle. The optimized tilt angle gave more efficiency than other tilt angle. The optimize water depth is 18mm for 18° angle. This cost-effective design is expected to provide the rural communities an efficient way to convert the brackish water in to potable water.


2021 ◽  
Vol 2119 (1) ◽  
pp. 012096
Author(s):  
Naseer T. Alwan ◽  
S E Shcheklein ◽  
O M Ali

Abstract Solar distillation is an important technology to get potable water from saltwater using clean and free solar energy. In the current study, an experimental and theoretical investigation of a single-slope traditional solar still was carried out, and the freshwater productivity and thermal efficiency were evaluated for four typical days (19/06, 17/07, 22/08, and 15/09) of 2019 by implementing temperature parameters in different points of the solar still, and the weather parameters such as solar radiation, and ambient air temperature. The study showed an acceptable agreement between the experimental and theoretical results with an average of 6.6% measured deviation of the experimental data. It was noticed that the highest values of productivity were recorded on July 17, 2019.


Solar Energy ◽  
2004 ◽  
Author(s):  
E. F. Jaguaribe ◽  
P. C. Lobo ◽  
M. A. R. Andrade ◽  
F. B. Ferraz

In many arid and semi-arid zones, such as in the Brazilian Northeast, potable water is scarce and people and animals suffer water scarcity year after year. On the other hand, insolation is usually high in these areas, favoring the use of solar stills. However, these stills demand substantial investments, not affordable by most users. One way to reduce costs is to increase the evaporation rate to raise the yield of solar stills. One method of enhancing the evaporation rate is to increase water temperature instantaneously during periods of high insolation by the reduction of the water thermal inertia [8–10]. This work discusses the increase water evaporation rate in a conventional solar still, by reducing the thermal inertia, and the increase in productivity of a Conventional Solar Still, CSS, by wicking. Results from experiments in two different days show that wicking increased the productivity of a CSS, from 17.1 to 19.5%. Knowledge of the mechanism that improves the yield of a CSS, should encourage the use of solar stills to minimize the scarcity of potable water in semi-arid zones.


Author(s):  
Subramaniyan C ◽  
◽  
Prakash K B ◽  
Amarkarthik A ◽  
Kalidasan B ◽  
...  

Demand and conservation for potable water has become a foremost concern world-wide. Many technologies were adapted for converting the saline water to potable water to meet the required demand on water conservation. In the current research work triangular solar still with rectangular-fins attached to the basin is proposed to enhance the output of potable water from the solar still setup. Solar still with and without rectangular-fins on the basin are fabricated for experimental comparison and evaluation in addition to numerical investigations. Thermal Performance, instantaneous efficiency and potable water output of the proposed solar still & base solar still are investigated during March month for the location of Sathyamangalam. Investigation shows enhancement of water production in the proposed solar still by 41% higher compared to the base still. The maximum distillate output from modified still and base still for a typical day is 3.1 liter and 2.2 liter respectively.


2020 ◽  
Vol 6 (5) ◽  
pp. 0666-0667
Author(s):  
Ali. F. Muftah

Water is life, and the threat of unsustainable means of potable water supplies has led to the reviews of various renewable energy sources to create a cleaner and more efficient solution for potable water supply. The aim of this study is to present a way in which the efficiency of stepped solar still can be increased. It is to increase the efficiency of solar still by increasing the amount of time that the solar still is directly perpendicular to the sunlight. The Micro-Electro-Mechanical Systems (MEMS) light sensors for solar tracking are used to enhance the productivity. The results obtained indicate that the use of MEMS light sensors for solar tracking are used to makes a solar still to be predictable and it equally increases its efficiency in terms of distillate yield and overall performance.


In the present research article, physicochemical parameters of raw and distilled water of the Gomti River are estimated and compared with standards of drinking water quality by using a modified double slope solar distillation unit. The raw water as five different samples collected from different locations of Gomti River (Lucknow, Uttar Pradesh, India) was treated. Total number of 16 physiological and biochemical characteristics and parameters of raw and distilled water are estimated such as electrical conductivity (3.62 ± 0.176 to 3.21 ± 0.52), TDS (837 ± 49.65 to 682 ± 15.73), pH (8.7 ± 0.18 to 8.9 ± 0.50), alkalinity (223 ± 9.23 to 215 ± 3.36), total hardness (347 ± 19.82 to 313 ± 11.2), DO (5.79 ± 0.36 to 3.29 ± 0.67), chloride (104 ± 3.4 to 108 ± 4.9), nitrate (7.21 ± 0.29 to 7.93 ± 0.83), BOD (3.27 ± 0.79 to 2.24 ± 0.27), TSS (403.27 ± 0.19 to 214.07 ± 0.32), COD (39.56 ± 0.76 to 33.2 9± 0.17), sulphate (452 ± 0.63 to 321 ± 1.67) and Ecoliform (3100 ± 3.93 to 2750 ± 2.45) which were within the range of World Health Organization & Bureau of Indian Standers approved standards. It is observed that this fabricated modified double slope solar still is producing drinkable water as per the requirement for solving the water scarcity problems in especially coastal & arid areas due to shortage of electricity. Experimental results show that solar still is producing 8-9 liters in the summer & 4-5 liters in the winter seasons.


Access to fresh water is a problem faced by both developed and under developed nations. Although seawater is plentiful, large amounts of energy is required to separate the potable water from the salts. Compared to other desalination processes utilising fossil fuels, solar distillation is inexpensive, environmentally friendly and employs clean and renewable energy. This paper seeks to explore the effect of the single slope solar still condenser plate material on the still production under Malaysian climate. 5 mm thick extra clear float glass condenser plate produced the highest amount of fresh water (63.5 ml) compared to 2 mm thick clear float glass and 5 mm thick bronze glass.


Author(s):  
Md. Raquibul Hasan

The availability of drinking water is reducing day by day, whereas the freshwater necessity is tremendously increasing. There is a need for some sustainable water distillation (purification) to overcome this problem. Solar desalination is a technique used to convert brackish or saline water into potable water, and solar still is a useful device to distil brackish water for drinking purposes. Numerous designs of the solar still system have been developed worldwide. Many researchers outlined mathematical terms, performed experiments and validated the outcome from the various types of solar stills by varying the design and operating parameters. In this article, a review of the active and passive solar stills' performance has been carried out.


Sign in / Sign up

Export Citation Format

Share Document