scholarly journals Interstitial boron-doped mesoporous semiconductor oxides for ultratransparent energy storage

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jian Zhi ◽  
Min Zhou ◽  
Zhen Zhang ◽  
Oliver Reiser ◽  
Fuqiang Huang

AbstractRealizing transparent and energy-dense supercapacitor is highly challenging, as there is a trade-off between energy storing capability and transparency in the active material film. We report here that interstitial boron-doped mesoporous semiconductor oxide shows exceptional electrochemical capacitance which rivals other pseudocapacitive materials, while maintaining its transparent characteristic. This improvement is credited to the robust redox reactions at interstitial boron-associated defects that transform inert semiconductor oxides into an electrochemically active material without affecting its transparency. By precisely tuning the level of doping, the pseudocapacitive reactivity of these materials is optimized, resulting in a volumetric capacitance up to 1172 F cm−3. Attributing to such efficient charge storage utilization on the active film, the fabricated transparent supercapacitor delivers a maximum areal energy density of 1.36 × 10−3 mWh cm−2 that is close to those of conventional pseudocapacitive materials, with nearly 100% capacitance retention after 15000 cycles and ultrahigh transparency (up to 85% transmittance at 550 nm). In addition, this device shows excellent durability and flexibility with multiple optional outputs, demonstrating the potential as a transparent energy supply in planar electronics.

1997 ◽  
Vol 161 ◽  
pp. 437-442
Author(s):  
Salvatore Di Bernardo ◽  
Romana Fato ◽  
Giorgio Lenaz

AbstractOne of the peculiar aspects of living systems is the production and conservation of energy. This aspect is provided by specialized organelles, such as the mitochondria and chloroplasts, in developed living organisms. In primordial systems lacking specialized enzymatic complexes the energy supply was probably bound to the generation and maintenance of an asymmetric distribution of charged molecules in compartmentalized systems. On the basis of experimental evidence, we suggest that lipophilic quinones were involved in the generation of this asymmetrical distribution of charges through vectorial redox reactions across lipid membranes.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jian Zhi ◽  
Min Zhou ◽  
Zhen Zhang ◽  
Oliver Reiser ◽  
Fuqiang Huang

A Correction to this paper has been published: https://doi.org/10.1038/s41467-021-21705-3


2016 ◽  
Vol 4 (9) ◽  
pp. 3249-3252 ◽  
Author(s):  
Kan Sato ◽  
Takaaki Yamasaki ◽  
Takahiro Mizuma ◽  
Kenichi Oyaizu ◽  
Hiroyuki Nishide

The ionic conductivity of a liquid crystal electrolyte was switched along with redox reactions of polyviologen.


RSC Advances ◽  
2017 ◽  
Vol 7 (14) ◽  
pp. 8561-8566 ◽  
Author(s):  
Hongyuan Chen ◽  
Sha Zeng ◽  
Minghai Chen ◽  
Yongyi Zhang ◽  
Qingwen Li

In symmetric supercapacitors based on MnO2, only MnO2 on the negative electrode serves as the electrochemically active material. MnO2 on the negative electrode dissolves and re-deposites on the positive electrode, thus induces a decrease in specific capacitance.


2019 ◽  
Vol 799 ◽  
pp. 191-196
Author(s):  
Masoud Taleb ◽  
Roman Ivanov ◽  
Irina Hussainova

Lithium-sulfur (Li-S) batteries are promising as a next generation energy-storage device because their energy density is higher than that of current Li-ion devices. Alumina nanofibers coated with graphene is electrochemically active material with tunable graphene flakes and surface area. Combination of this material with sulfur leads to an improved initial discharge capacity and cycle stability, probably due to improved electrical and ionic transport during electrochemical reactions. Based on this understanding, the resulting graphene sulfur composite showed high and stable specific capacities up to ∼900 mAh/g after 50 cycles, representing a promising cathode material for rechargeable lithium batteries with high energy density.


Processes ◽  
2020 ◽  
Vol 8 (10) ◽  
pp. 1248
Author(s):  
Arminas Ilginis ◽  
Egidijus Griškonis

Lead-acid battery (LAB) weight is a major downside stopping it from being adapted to electric/hybrid vehicles. Lead grids constitute up to 50% of LAB electrode’s weight and it only ensures electric connection to electrochemically active material and provides structural integrity. Using graphite felt (GF) as a current collector can reduce the electrode’s weight while increasing the surface area. Modification of GF with lead (II) oxide using impregnation and calcination techniques and lead (II) formate and acetate as precursors was conducted to produce composite electrodes. It was found that lead (II) formate is not a viable material for this purpose, whereas multiple impregnation in lead (II) acetate saturated solution and calcination in air leads to thermal destruction GF. However, impregnation and calcination under nitrogen atmosphere in three cycles produced a sample of good quality with a mass loading of lead (II) oxide that was 17.18 g g−1 GF. This equates to only 5.5% of the total mass of composite electrode to be GF, which is immensely lower than lead grid mass in traditional electrodes. This result shows that a possible lightweight alternative of LAB electrode can be produced using the proposed modification method.


Author(s):  
Olga Yakubovich ◽  
Galina Kiriukhina ◽  
Larisa Shvanskaya ◽  
Anatoliy Volkov ◽  
Olga Dimitrova

Two novel phases, potassium copper aluminium bis(phosphate), KCuAl[PO4]2 (I), and potassium zinc aluminium bis(phosphate-silicate), K(Al,Zn)2[(P,Si)O4]2 (II), were obtained in one hydrothermal synthesis experiment at 553 K. Their crystal structures have been studied using single-crystal X-ray diffraction. (I) is a new member of the A + M 2+ M 3+[PO4]2 family. Its open 3D framework built by AlO5 and PO4 polyhedra includes small channels populated by columns of CuO6 octahedra sharing edges, and large channels where K+ ions are deposited. It is assumed that the stability of this structure type is due to the pair substitution of Cu/Al with Ni/Fe, Co/Fe or Mg/Fe in different representatives of the series. From the KCuAl[PO4]2 structural features, one may suppose it is a potentially electrochemically active material and/or possible low-temperature antiferromagnet. In accordance with results obtained from X-ray diffraction data, using scanning electron microscopy, microprobe analysis and detailed crystal chemical observation, (II) is considered as a product of epitaxial intergrowth of phosphate KAlZn[PO4]2 and silicate KAlSi[SiO4]2 components having closely similar crystal structures. The assembly of `coherent intergrowth' is described in the framework of a single diffraction pattern.


Electronics ◽  
2020 ◽  
Vol 9 (3) ◽  
pp. 461 ◽  
Author(s):  
Minh T. Nguyen ◽  
Cuong V. Nguyen ◽  
Linh H. Truong ◽  
Anh M. Le ◽  
Toan V. Quyen ◽  
...  

Wireless power transfer (WPT) techniques are important in a variety of applications in both civilian and military fields. Unmanned aerial vehicles (UAVs) are being used for many practical purposes, such as monitoring or delivering payloads. There is a trade-off between the weight of the UAVs or their batteries and their flying time. Their working time is expected to be as long as possible. In order to support the UAVs to work effectively, WPT techniques are applied with UAVs to charge secondary energy supply sources in order to increase their working time. This paper reviews common techniques of WPT deployed with UAVs to support them while working for different purposes. Numerous approaches have been considered to illustrate techniques to exploit WPT techniques. The charging distances, energy harvesting techniques, electronic device improvements, transmitting issues, etc., are considered to provide an overview of common problems in utilizing and charging UAVs. Moreover, specific problems are addressed to support suitable solutions with either techniques or applications for UAVs.


2017 ◽  
Vol 5 (48) ◽  
pp. 25420-25430 ◽  
Author(s):  
Ning An ◽  
Zhongai Hu ◽  
Hongying Wu ◽  
Yuying Yang ◽  
Ziqiang Lei ◽  
...  

Danthron (DT) with multi-electron redox centers as a novel organic electrochemically active material for supercapacitors has been decorated on reduced graphene oxide nanosheets (RGNs) via a facile one-step reflux method.


2011 ◽  
Vol 156 (1) ◽  
pp. 35-42 ◽  
Author(s):  
S. Yunus ◽  
A. Attout ◽  
G. Vanlancker ◽  
P. Bertrand ◽  
N. Ruth ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document