scholarly journals Modified plant architecture integrated with liquid fertilizers improves fruit productivity and quality of tomato in North West Himalaya, India

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Avinash Chandra Rathore ◽  
Harsh Mehta ◽  
J. Jayaprakash ◽  
Charan Singh ◽  
Anand Kumar Gupta ◽  
...  
Keyword(s):  
Block Design ◽  
Water Productivity ◽  
Farmyard Manure ◽  
Matter Content ◽  
Cost Ratio ◽  
Dry Matter Content ◽  
Tomato Plants ◽  
Liquid Fertilizer ◽  
Single Shoot ◽  
Raised Bed

AbstractIndia produces around 19.0 million tonnes of tomatoes annually, which is insufficient to meet the ever-increasing demand. A big gap of tomato productivity (72.14 t ha–1) between India (24.66 t ha–1) and the USA (96.8 t ha–1) exist, which can be bridged by integrating trellis system of shoot training, shoot pruning, liquid fertilizers, farmyard manure, and mulching technologies. Therefore, the present experiment was conducted on tomato (cv. Himsona) during 2019–2020 at farmers' fields to improve tomato productivity and quality. There were five treatments laid in a randomized block design (RBD) with three replications; T1 [Farmer practice on the flatbed with RDF @ N120:P60:K60 + FYM @6.0 t ha−1 without mulch], T2 [T1 + Polythene mulch (50 microns)], T3 [Tomato plants grown on the raised bed with polythene mulch + FYM @ 8.0 t ha−1 + Single shoot trellis system + Side shoot pruning + Liquid Fertilizer (LF1—N19:P19:K19) @ 2.0 g l–1 for vegetative growth + Liquid Fertilizer (LF2—N0: P52: K34) @ 1.5 g l–1 for improving fruit quality], T4 [Tomato plants grown on the raised bed with polythene mulch + FYM @ 8.0 t ha−1 + Single shoot trellis system + Side shoot pruning + LF1 @ 4.0 g l–1 + LF2 @ 3.0 g l–1], and T5 [Tomato plants grown on the raised bed with polythene mulch + FYM @ 10.0 t ha−1 + Single shoot trellis system + Side shoot pruning + LF1 @ 6.0 g l–1 + LF2 @ 4.5 g l–1]. The results revealed that tomato plant grown on the raised beds with polythene mulch, shoot pruning, trellising, liquid fertilizers, and farmyard manure (i.e., T5) recorded higher shoot length, dry matter content, and tomato productivity by 20.75–141.21, 18.79–169.4, and 18.89–160.87% as compared to T4–T1 treatments, respectively. The T5 treatment also recorded the highest water productivity (28.39 kg m–3), improved fruit qualities, net return (10,751 USD ha–1), benefit–cost ratio (3.08), microbial population, and enzymatic activities as compared to other treatments. The ranking and hierarchical clustering of treatments confirmed the superiority of the T5 treatment over all other treatments.

Effect of Nutrient Levels on Growth, Yield and Economics of Dolichos Bean (Dolichos lablab L.) in Northern Dry Zone of Karnataka, India

2020 ◽  
Author(s):  
Samapika Dalai ◽  
R. Mulge ◽  
C N Hanchinamani ◽  
A B Mastiholi ◽  
V Kantharaju ◽  
...  
Keyword(s):  
Dry Matter ◽  
Growth Parameters ◽  
Block Design ◽  
Growth Yield ◽  
Maximum Growth ◽  
Matter Content ◽  
Cost Ratio ◽  
Dry Matter Content ◽  
Pooled Data ◽  
Pod Yield

The field experiment was conducted at Kittur Rani Channamma College of Horticulture, Arabhavi, during 2016-17 and 2017-18 to investigate the effect of different levels of nitrogen (0 and 25 kg/ha), phosphorus (0, 50 and 75 kg/ha) and potassium (0, 25 and 50 kg/ha) on growth, flowering, yield and economics of dolichos bean. The experiment was laid out in factorial randomized block design comprising of eighteen treatments replicated thrice. Among indivisual NPK levels, the higher level of nitrogen (25 kg N/ha), phosphorus (75 kg P2O5/ha) and potassium (50 kg K2O/ha) recorded significantly maximum growth (plant height, number of primary and secondary branches, leaf area and dry matter content per plant at harvest), early flowering (except N2 level) and pod yield (162.32, 184.14 and 164.75 q/ha) as compared to lower levels in 2016-17 and 2017-18 growing seasons and pooled data. Similarly, amongst all NPK interaction levels, higher fertilizer dose of 25-75-50 kg N-P2O5-K2O/ha recorded significantly maximum growth parameters however, it was at par with 25-75-25 kg N-P2O5-K2O/ha except dry matter content per plant during both the experimental years. Pooled data followed similar trend. On pooled basis, recommended fertilizer dose (25-50-25 kg N-P2O5-K2O/ha) showed early days to 50 percent flowering whereas pod yield (198.44 q/ha) was recorded maximum at higher fertilizer dose (25-75-50 kg N-P2O5-K2O/ha). Similarly, in case of economics, higher fertilizer dose of 25-75-50 kg N-P2O5-K2O/ha recorded highest benefit: cost ratio (5.27) during both the experimental years as well as in pooled data but it was at par with 25-75-25 kg N-P2O5-K2O/ha. Hence, for profitable cultivation of vegetable type dolichos bean in northern transition zone of Karnataka, NPK fertilizer must be applied at the rate of 25-75-25 kg N-P2O5-K2O/ha.

scholarly journals Evaluation of Potato (Solanum tuberosum L.) Varieties for Yield and Some Agronomic Traits

2020 ◽  
Vol 5 (1) ◽  
pp. 63-74
Author(s):  
Lemma Tessema ◽  
Wassu Mohammed ◽  
Tesfaye Abebe
Keyword(s):  
Specific Gravity ◽  
Dry Matter ◽  
Tuber Yield ◽  
Block Design ◽  
Matter Content ◽  
Tuber Quality ◽  
Dry Matter Content ◽  
Marketable Tuber ◽  
Potato Varieties ◽  
Central Highlands

AbstractA field experiment was conducted in the central highlands of Ethiopia to evaluate the performance of potato varieties for tuber yield and to identify a superior variety in tuber yield and yield components. The experiment was laid out in a randomized complete block design with three replications at two locations in the central highlands of Ethiopia during the 2017 main cropping season. The results of analysis of variance (ANOVA) showed the presence of highly significant (P<0.01) differences among varieties over all traits studied. The mean squares for location were also significant in indicating the influence of environments on the traits of the studied varieties. However, the interaction between variety and environment had no significant effect on the performances of the potato varieties to attain 50% flowering, specific gravity and dry matter content indicating a similar performance of these traits across all locations. The variety Belete produced the maximum total tuber yield of 32.8 t ha -1 and marketable tuber yield of 29.1 t ha-1. Conversely, farmers` variety Nech Abeba produced the minimum total tuber yield of 13.8 t ha-1 and marketable tuber yield of 8.4 t ha-1. For most tuber quality traits, viz., tuber specific gravity, dry matter content, starch percentage and total starch yield, varieties Belete and Menagesha were the maximum and minimum producers, respectively. Thus, it could be concluded that varietal and environmental variations as well as their interaction had considerable influence on tuber yield and the potato’s attributes.

scholarly journals Quality aspects of pepino dulce fruits in distinct ripening stages, packaging forms and storage conditions

2020 ◽  
Vol 23 ◽  
Author(s):  
Neide Botrel ◽  
Raphael Augusto de Castro e Melo
Keyword(s):  
Fruit Quality ◽  
Block Design ◽  
Titratable Acidity ◽  
Storage Conditions ◽  
Matter Content ◽  
Soluble Solids ◽  
Small Scale ◽  
Dry Matter Content ◽  
Ripening Stages ◽  
Quality Aspects

Abstract Pepino dulce (Solanum muricatum Aiton) or Pepino has been growing to produce edible, juicy and attractive fruits. The imported fruits and national small scale of Pepino dulce production are currently stored and commercialized under the absence of postharvest handling recommendations. Therefore, this work aimed to evaluate the quality aspects of Pepino dulce fruits in distinct ripening stages, forms of packaging and conditions of storage. The trial was conducted in a 2x2x2 factorial scheme - 2 ripening stages (ripe and immature) x 2 forms of packaging (with and without wrapping in plastic film) x 2 conditions of storage (room: 25 °C ± 2 ºC and 57% ± 5% of relative humidity (RH); cold: under refrigeration 10 °C ± 2 °C and 85% ± 5% of RH) – in a complete randomized block design. Fruit quality attributes, such as vitamin C, chemical and phenolic content, fruit color (mesocarp), firmness, dry matter content, total titratable acidity (TA), total soluble solids and pH, were evaluated. Fruits showed a centesimal composition with low calories and a significant content of potassium (K), phosphorus (P) and magnesium (Mg), which can contribute to the daily supply of these elements. For commercialization purposes, the association of packaging (plastic wrapping film) and refrigerated storage (cold: 10 °C ± 2 °C and 85% ± 5% of RH) to maintain the characteristics of fruit quality after a 15 days period is more important than its individual use.

scholarly journals Características morfométricas e rendimento da palma forrageira ‘Gigante’ sob diferentes adubações e configurações de plantio

2016 ◽  
Vol 11 (1) ◽  
pp. 67 ◽  
Author(s):  
M. C. Padilha Junior ◽  
S. L. R. Donato ◽  
J. A. Silva ◽  
P. E. R. Donato ◽  
E. S. Souza
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Matter Content ◽  
Mineral Fertilizers ◽  
Organic Chemical ◽  
Dry Matter Content ◽  
Morphometric Characteristics ◽  
Morphometric Traits ◽  
Area Index ◽  
Organic Mineral

<p>Objetivou-se com o presente trabalho avaliar as características morfométricas e de rendimento da palma forrageira 'Gigante' submetida a diferentes tipos de adubação orgânica, química e organomineral e configurações de plantio<em>. </em>O experimento foi instalado em LATOSSOLO Vermelho-Amarelo distrófico, num delineamento em blocos casualizados, em esquema de parcelas subdivididas, com três repetições. As parcelas constituídas por duas configurações de plantio: 1) 24.0000 plantas ha<sup>-1</sup>, dispostas em fileira tripla, no espaçamento 3,00 x 1,00 x 0,25 m; 2) 26.666 plantas ha<sup>-1</sup>, dispostas em fileira quádrupla, no espaçamento 3,00 x 1,00 x 0,25 m; as subparcelas compostas por 12 tipos de adubação orgânica, química e organomineral. Aos 650 DAP mensuraram-se altura da planta, número, comprimento, largura e índice de área de cladódios, produção de matéria verde e seca e teor de matéria seca. As características morfométricas, o teor de matéria seca e a produção de massa verde e matéria seca foram influenciadas pelas adubações (P&lt;0,05), independentemente da configuração utilizada. Das características morfométricas apenas a largura e área do cladódio não foram influenciadas pelas adubações. A ausência de adubação ou apenas 30 Mg ha<sup>-1</sup> ano<sup>-1</sup> de esterco bovino são insuficientes para obter resultados satisfatórios com palma forrageira ‘Gigante’.</p><p><strong><em>Morphometric traits and yield of forage cactus 'Gigante' under different fertilization and planting settings</em></strong></p><p><strong>Abstract</strong><strong>: </strong>The objective of this study was to evaluate the morphometric characteristics and yield of 'Gigante' forage cactus subjected to different types of organic, chemical, and organic mineral fertilizers and planting configurations. The experiment was installed in a dystrophic Red-Yellow LATOSOL (Oxisol), in a randomized block design, in a split plot design parcel, with three replications. The plots consist of two plant configurations: 1) 24.0000 pl ha<sup>-1</sup>, arranged in triple row, spaced 3.00 x 1.00 x 0.25 m; 2) 26,666 pl ha<sup>-1</sup>, arranged in quadruple row, spaced 3.00 x 1.00 x 0.25 m. The subplots are composed of types of organic, chemical, and organic mineral fertilizers. On the 650th DAP were measured the plant height, number, length, width, cladode area index, fresh and dry matter yield and dry matter content. Morphometric characteristics, the dry matter content and the green mass and dry matter production were influenced by fertilization (P &lt;0.05), regardless the configuration. From the morphometric features, only the width and cladode area were not affected by fertilization. The absence of fertilization or just 30 Mg ha<sup>-1</sup> yr<sup>-1</sup> of cattle manure is not enough to achieve satisfactory results with 'Gigante' forage cactus.</p>

scholarly journals Variability, heritability, and correlations of agronomic traits in an onion landrace and derived S1 lines

2014 ◽  
Vol 14 (1) ◽  
pp. 29-35 ◽  
Author(s):  
Bettina Porta ◽  
Mercedes Rivas ◽  
Lucía Gutiérrez ◽  
Guillermo A Galván
Keyword(s):  
Dry Matter ◽  
Agronomic Traits ◽  
Block Design ◽  
Transgressive Segregation ◽  
Matter Content ◽  
Leaf Length ◽  
Soluble Solids ◽  
Dry Matter Content ◽  
Original Population ◽  
Random Block Design

This study assessed variability, heritability and correlations of agronomic traits in an onion (Allium cepa L.) landrace and derived S1lines after a single selfing generation. Bulbs used to develop S1lines were selected for shape, colour and high number of skins. Fifty-one S1lines and the original population were evaluated using an incomplete random block design. The original population and S1lines were highly diverse for quantitative and qualitative traits. S1lines were significantly different, with transgressive segregation for number and maximum leaf length, bulbing index, bulb weight, diameter, and dry matter content. Variances within S1lines were greater than among S1lines for all traits. Bulb colour and number of skins responded to selection. Heritabilities for dry matter and soluble solids were 52.6% and 36.1% respectively. Both traits were highly correlated. The development of S1lines allowed the expression of genetic variation and the identification of better genotypes for agronomic traits of interest.

scholarly journals Agrobiological estimation of the collection samples of Allium sativum subsp. vulgare (Kuzn.)

2021 ◽  
Author(s):  
V. V. Yatsenko ◽  
K. M. Shevchuk ◽  
A. I. Boiko ◽  
O. Yu. Polovynchuk
Keyword(s):  
Block Design ◽  
Matter Content ◽  
Research Field ◽  
Dry Matter Content ◽  
Long Term Storage ◽  
Field Laboratory ◽  
Biological Potential ◽  
Standard Collection ◽  
Growing Conditions ◽  
Standard Cultivar

Purpose. To study biological features of biological potential realization of softneck garlic productivity. Methods. Field, laboratory, statistical and calculation-analytical. Results. The results of studying local and introduced forms of softneck garlic cultivars (samples No. 1, 14, 16, 19, 24, 27) in comparison with varieties (‘Prometei’ (standard) and ‘Liubasha’) in terms of productivity are presented. In the research, field, laboratory and statistical methods were used. The experimental design was a systemic complete block design without replicates. It was found that all, without exception, softneck garlic cultivars have an erectoid type of leaf placement. Introduced cultivars featured low seedstalk formation, which is a manifestation of adaptation to growing conditions. All studied cultivars were characterized by lower values of the number of air bulbils in the inflorescence compared to the standard cultivar ‘Prometei’. Thus, ‘Liubasha’ formed 16.1% fewer bulbils than the standard; however, its 1000-bulbil weight was 37.2% larger than in ‘Prometei’. The softneck cultivars that formed bulbils on the reduced seedstalk were characterized by a very small number of bulbils − by 89.7–90.8% less than in the standard – however, the formed bulbils had very large 1000-bulbil weight. Thus, sample No. 1 formed bulbils by 542.0% larger in terms of the 1000-bulbil weight than standard; sample No. 16 by 554.3%; sample No. 27 by 752.9%. Samples No. 14, 19 and 24 did not formed seedstalks. In terms of the bulbil yield, the samples that formed bulbils had by 11.7–40.1% lower indicators than the standard. Cultivar ‘Liubasha’ was characterized by a 19.0% higher bulbil yield. The vast majority of collection samples of winter garlic formed smaller bulbs. Sample No. 16 had a large bulb wight compared to the standard. Collection samples had significantly lower yield except for No. 16, which exceeded the standard by 30.2 and 56.8%. Conclusions. Collection samples have a significantly higher dry matter content. The promising samples (No. 14, 16, 19, 24) were selected by a number of characteristics as promising for further breding of softneck table garlic cultivars. In further research, the content of secondary metabolites and the storage of the samples in uncontrolled conditions will be studied in order to create table garlic cultivars suitable for long-term storage.

scholarly journals Growth and Yield of Onion as Influenced by Sulphur and Boron with Mulch Materials

2021 ◽  
pp. 1-14
Author(s):  
Sajeed Hasan Bappy ◽  
Khaleda Khatun ◽  
Tahmina Mostarin ◽  
Mutasim Fuad Shuvo ◽  
Mst. Umme Habiba ◽  
...  
Keyword(s):  
Plant Height ◽  
Dry Matter ◽  
Block Design ◽  
Matter Content ◽  
Growth And Yield ◽  
Leaf Number ◽  
Maximum Diameter ◽  
Dry Matter Content ◽  
Economic Point ◽  
Neck Diameter

A field experiment was conducted at the research farm of Sher-e-Bangla Agricultural University, Dhaka. During the period from October, 2018 to March, 2019 to find out the growth and yield of onion as influenced by Sulphur and Boron with mulch materials. The experiment consisted of two factors: Factor A: Four doses of Sulphurand Boron fertilizer viz. F0 = S0kgB0kg/ha (Control), F1 = S20kgB1kg/ha, F2 = S40kgB2kg/ha, F3 = S60kgB3kg/ha and Factor B: Four types of mulch viz. M0 = No mulch and no irrigation, M1 = Black polythene, M2 = Water hyacinth and M3 = Rice straw. There were 16 treatment combinations and experiment was setup in a Randomized Complete Block Design (RCBD) with three replications. In case of Sulphur and Boron treatments at 60 days after transplanting (DAT), the highest plant height 53.38 cm, maximum leaf number 10.48, highest bulb length 4.83 cm,, maximum neck diameter (1.31 cm), highest dry matter content (15.98%), dry matter content of leaf (24.74%), single bulb weight (39.93 g), yield per plot (0.80 kg) and yield per hectare (9.98 t) were obtained from F3 treatment. Among the mulch materials,  highest plant height at 60 DAT (52.51 cm), maximum leaf number (10.19), highest bulb length (4.52 cm), highest bulb diameter (5.74 cm), maximum neck diameter (1.26 cm), dry matter content of leaf (23.35%), single bulb weight (39.05 g), yield per plot (0.78 kg) and yield per hectare (9.76 t) were obtained from M1 treatment. In combined effect, the highest plant height at 60 DAT (55.54 cm), maximum leaf number (11.47), longest bulb length (5.51 cm), highest bulb diameter (6.68 cm), maximum diameter of neck (1.42 cm), dry matter content of leaf (27.48%), single bulb weight (42.40 g), yield per plot (0.85 kg) and yield per hectare (11.21 t) were obtained from F3M1 treatment (S60kg/ha + B3kg/ha with black polythene mulch). The highest gross return (Tk. 3, 36, 300/ha), net return (Tk. 1, 88, 934/ha) and benefit cost ration (2.28) was obtained from the treatment combination (F3M1). Accordingly, for high growth, high yield, and economic point of view, F3M1 treatment is recommended in onion cultivation.

scholarly journals Effect of Different Planting Material on Physiological Parameters and Cassava Mosaic Incidence in Cassava (Manihot esculenta Crantz.)

2021 ◽  
pp. 20-25
Author(s):  
S. Nanthakumar ◽  
K. Krithika ◽  
M. Prabhu
Keyword(s):  
Disease Incidence ◽  
Block Design ◽  
Maximum Yield ◽  
Matter Content ◽  
Mosaic Disease ◽  
Physiological Parameters ◽  
Dry Matter Content ◽  
Vegetable Crops ◽  
Manihot Esculenta Crantz ◽  
Area Index

An investigation was carried out to assess the effect of planting materials on physiological parameters, cassava mosaic incidence and yield of Cassava varieties viz. H-226 and CO.2 at the Department of Vegetable crops, Horticultural College and Research Institute, TNAU, Coimbatore during September 2010 to June 2011. The experiments were laid out in Factorial Randomized Block Design with four treatments and three replications in two varieties. The results revealed that the tissue culture plants were found be the best in virtue of its high leaf area index, net assimilation rate, dry matter content, tuber yield (26.33 t ha-1) and least incidence of cassava mosaic virus. Among the varieties, CO.2 showed less incidence of CMD. The tissue cultured plants may be recommended to farmers to reduce mosaic disease incidence and get maximum yield in cassava.

scholarly journals Effect of harvest period on the quality of storage roots and protein content of the leaves in five cassava cultivars (Manihot esculenta, Crantz)

2003 ◽  
Vol 46 (2) ◽  
pp. 295-305 ◽  
Author(s):  
Edvaldo Sagrilo ◽  
Pedro Soares Vidigal Filho ◽  
Manoel Genildo Pequeno ◽  
Carlos Alberto Scapim ◽  
Maria Celeste Gonçalves Vidigal ◽  
...  
Keyword(s):  
Protein Content ◽  
Dry Matter ◽  
Starch Content ◽  
Block Design ◽  
Matter Content ◽  
Dry Matter Content ◽  
Dry Matter Accumulation ◽  
Storage Roots ◽  
Fresh Matter

The effect of harvest period on the quality of storage roots and leaves of cassava cultivars was determined in an experiment carried out in a randomized complete block design with four replications in a split plot scheme, with five cultivars in the plots and ten harvest times in the subplots. The IAC 13 cultivar had the highest rate of dry matter accumulation in the storage roots and the Mico cultivar the lowest. The period of least dry matter content in the storage roots occurred later for the Fécula Branca, Mico and IAC 14 cultivars, and the minimum starch content in the storage roots occurred later for the Fécula Branca and Mico cultivars. In general, the IAC 13, IAC 14 and Fécula Branca cultivars had higher dry matter content in the storage roots, while higher starch content in the dry and fresh matter were obtained in the Fécula Branca cultivar. The crude protein content in the leaves decreased as the plant aged.

The study of the elements of tomato cultivation technology in the conditions of subirrigation aeroponics at Fitopiramida greenhouse

2020 ◽  
pp. 8-11
Author(s):  
Х.К. Фаравн ◽  
В.И. Леунов ◽  
Р.Р. Усманов ◽  
Т.А. Терешонкова ◽  
В.С. Голубович ◽  
...  
Keyword(s):  
Statistical Processing ◽  
Matter Content ◽  
Mineral Fertilizers ◽  
Dry Matter Content ◽  
Constant Composition ◽  
Early Maturity ◽  
Tomato Plants ◽  
Cultivation Technology ◽  
High Level ◽  
Selection And Assessment

Технологии аэро- и гидропоники – вершина технологий для защищенного грунта. Для производителей овощей большой интерес представляет многоярусная гидропоника. Один из вариантов ее реализации – многоярусная установка «Фитопирамида». Она предназначена для бессубстратного выращивания растений аэроводным методом (субирригационная аэропоника). Первым этапом селекционного процесса по созданию гибридов для малообъемной культуры типа «Фитопирамида» стало сравнительное испытание сортов и гибридов томата с различной окраской и массой плода. Предварительные эксперименты показали эффективность и хорошую приспособленность томатов с детерминантным типом роста для условий «Фитопирамиды». Поэтому было принято решение испытать два коммерческих детерминантных гибрида, отличающихся по скороспелости, массе и окраске плода. Для основного питания в технологии «Фитопирамида» используется раствор удобрений постоянного состава, специально подобранный для культуры томата. Однако из литературы известно, что растения томата на различных этапах развития нуждаются в специфических соотношениях основных элементов и микроэлементов, поэтому для оптимизации роста и развития растений было предложено испытать несколько вариантов некорневых подкормок. Цель работы: подбор и оценка сортимента детерминантных томатов на пригодность к возделыванию в условиях этой технологии, изучение влияния на урожайность двух детерминантных гибридов различных некорневых подкормок, а также оценка уровня взаимодействия «сорт-вариант подкормки» на основе статистического анализа результатов. Исследования, проведенные в 2019-2020 годах, позволяют сделать предварительные выводы. Из 24 испытанных детерминантных гибридов выделены наиболее раннеспелые, с относительно высоким показателем содержания сухого вещества, ликопина. Гибрид F1Розанна более пригоден для условий «Фитопирамиды», это достоверно и по признаку урожайности, и по признаку продуктивности. Из исследуемых вариантов применения минеральных удобрений наилучшие и достоверные результаты были получены в варианте 3NPK; на основании статистической обработки установлен оптимальный вариант взаимодействия «сорт-уровень минерального питания» – гибрид F1Розанна на фоне 3NPK. Aeroponics and hydroponics technologies are one of the most advanced today. For vegetable growers, multi-tiered hydroponics is of great interest. One of its variants is the multi-tier plant Fitopiramida – designed for soilless growing of plants by the air method (subirrigation aeroponics). The first stage of the breeding process to create hybrids for a small-volume crop such as Fitopiramidа was a comparative test of varieties and hybrids of tomato with different colours and fruit weights. Preliminary experiments have shown the effectiveness and good adaptability of tomatoes of the determinant type of growth for the conditions of Fitopiramida. Therefore, it was decided to test 2 commercial determinant hybrids, differing in early maturity, weight and colour of the fruit. For the main nutrition in the Fitopiramidаtechnology, a solution of fertilizers of constant composition is used, specially selected for the tomato culture. However, it is known from the literature that tomato plants at various stages of development need specific ratios of basic elements and microelements, therefore, to optimize plant growth and development, it was proposed to test several options for foliar feeding. The aim of the work was the selection and assessment of the assortment of determinant tomatoes for suitability for cultivation under the conditions of this technology, the study of the effect on the yield of 2 determinant hybrids of different foliar dressings, as well as the assessment of the level of interaction «variety-option of feeding» based on the statistical analysis of the results. Research carried out in 2019-2020 allow us to draw preliminary conclusions: from 24 tested determinant hybrids, the earliest ripening, with a relatively high level of dry matter content, lycopene, were isolated; the F1Rozanna hybrid is more suitable for the conditions of the Fitopyramida. This is reliable, both in terms of yield and in terms of productivity. Among the investigated options for the use of mineral fertilizers, the most maximum and reliable results were obtained in the 3NPK option; on the basis of statistical processing, the optimal variant of the interaction «variety-level of mineral nutrition» was established - hybrid F1 Rozanna against the background of 3NPK.

Sign in / Sign up

Export Citation Format

Share Document