scholarly journals Influence of natural production conditions on efficient operation of wheel tractors

2022 ◽  
Vol 42 ◽  
pp. 03003
Author(s):  
Aleksandr A. Shuravin ◽  
Vladimir Leonov ◽  
Elena Polikutina ◽  
Sergey V. Shchitov ◽  
Evgeny E. Kuznetsov
Keyword(s):  
Far East ◽  
Experimental Studies ◽  
Field Work ◽  
Early Spring ◽  
Efficient Operation ◽  
Agricultural Work ◽  
Natural Production ◽  
Common Operation ◽  
Production Conditions

For the zones of “risky farming” characteristic of the Far East of the Russian Federation, the natural production conditions of the region are an important problem in preparing the soil for further basic agricultural work. So, when carrying out early spring agricultural work, due to presence of a solid underlying layer in the form of permafrost, they shall be completed in operational terms no more than 10 days, until the permafrost base thaws and the soil has not lost its bearing capacity. In addition, due to the peculiarities of the relief, the soil does not thaw equally in depth everywhere, which reduces the quality of field work and harrowing, as the most common operation, namely. This article provides theoretical and experimental studies on the adaptation of a wheeled tractor as part of a machine-tractor unit (MTU) used in harrowing to natural production conditions by installing a device that automatically regulates the load on the working body of the disc harrow or on the propellers of the energy device, depending on the conditions of use or the state of the motion surface.

Influence of mineral elements on the yield and quality of grain of the prospective line in winter tritikale

2020 ◽  
Author(s):  
I.N. Voronchikhina ◽  
◽  
A.G. Marenkova ◽  
V. S. Rubets ◽  
V. V. Pylnev
Keyword(s):  
Cost Effective ◽  
Mineral Elements ◽  
Early Spring ◽  
High Potential ◽  
Winter Triticale ◽  
Yield And Quality ◽  
Fertilizer System

The results of elements development of varietal agrotechnics of a new high-potential line 238h of winter triticale presented. It was identified that under the conditions of 2020 the most cost effective fertilizer system is an early spring application of NPK (S) (15-15-15 (10)) at a dose of 200kg/ha. The profitability level of this fertilizer was 88,9%.

Research of pressure influence in the gas supply system on the energy consuption level of gas devices

2019 ◽  
Vol 6 (2) ◽  
pp. 56-63
Author(s):  
L. D. Pylypiv ◽  
І. І. Maslanych
Keyword(s):  
Natural Gas ◽  
Residential Buildings ◽  
Supply System ◽  
Normal Operation ◽  
Gas Combustion ◽  
Efficient Operation ◽  
Gas Consumption ◽  
Natural Gas Combustion ◽  
Gas Supply

There are investigated the influence of operating pressures in the gas supply system on the level of such energy indicators as efficiency, gas flow and gas overrun by gas equipment in residential buildings. There is established a relationship between the values of operating pressures in the gas supply system and the gas consumption level of household appliances. The causes of insufficient pressure in the gas networks of settlements are analyzed in the article. There is also developed an algorithm for calculating the change in the efficiency of gas appliances depending on the operational parameters of the gas network. It has been found that the most efficient operation of gas appliances is observed at an overpressure at the inlet of gas appliances of about 1200 Pa.To ensure the required quality of natural gas combustion among consumers and minimize gas consumption there are justified the following measures in the article: coordinating a domestic regulatory framework for assessing the quality of natural gas with international norms and standards; improving the preparation of gas coming from local wells before supplying it to gas distribution networks; auditing low pressure gas pipelines and reconstructing areas affected by corrosion; ensuring standard gas pressure in the network for the normal operation of domestic gas appliances; stating quality indicators of natural gas combustion by gas sales organizations.

The system of indicators of the quality of the carbon-carbon composite materials and technologies of their production

2018 ◽  
pp. 127-132
Author(s):  
T. N. Antipova ◽  
D. S. Shiroyan
Keyword(s):  
Composite Material ◽  
Low Cost ◽  
Experimental Studies ◽  
Carbon Matrix ◽  
Carbon Composite ◽  
Optimal Number ◽  
Laboratory Equipment ◽  
Carbon Composite Material ◽  
Carbon Composite Materials

The system of indicators of quality of carbon-carbon composite material and technological operations of its production is proved in the work. As a result of the experimental studies, with respect to the existing laboratory equipment, the optimal number of cycles of saturation of the reinforcing frame with a carbon matrix is determined. It was found that to obtain a carbon-carbon composite material with a low cost and the required quality indicators, it is necessary to introduce additional parameters of the pitch melt at the impregnation stage.

Influence of different factors on the growth rate of young animals and the quality of beef

2021 ◽  
pp. 28-39
Author(s):  
V. N. Pristupa ◽  
D. S. Torosyan
Keyword(s):  
Experimental Studies ◽  
Live Weight ◽  
Federal District ◽  
Steppe Zone ◽  
Industrial Complex ◽  
Black And White ◽  
Dry Steppe ◽  
Intensive Rearing ◽  
Meat Productivity

The purpose of the work was to study and identify the main factors aff ecting the quantity and quality of beef produced and sold in the Southern Federal district. A comparative assessment of the growth, development, formation of meat productivity and quality of beef of young animals of beef, dual and dairy breeds with stall-pasture technology and intensive rearing in the industrial complex. Experimental studies have been carried out in farms in the Rostov region. The object of research was cows with calves of Kalmyk, Hereford, Aberdeen-Angus, Russian komolaya, Kazakh White-headed breeds, as well as young animals of the same breeds, in addition, Black-and-White and Swiss breeds. Removable live weight in Hereford steers at 18 months of age was 658,0 kg, and Aberdeen-Angus – 655,2 kg. Domestic steers of Kalmyk were 41–44 kg lower in live weight than their herdmates of two imported breeds. However, with intensive rearing at 18 months of age, steers of Kalmyk breed had a removable live weight of more than 613,7 kg and a carcass weight of 326 kg. The yield of hot carcass was 55,4 %, and the slaughter yield was 58,89 %, which was only 1–2 % lower than the world’s leading beef breeds. It has been found when analyzing the results of boning the half-carcasses of experimental steers that the biggest weight of half-carcasses and the content of muscle and fat tissue in them in absolute terms were in Hereford steers. Steers of Kalmyk breed took the third place in terms of weight of large-sized semi–fi nished products and signifi cantly lost to Aberdeen-Angus herdmates by 7,3 kg or 6,5 %, and Hereford steers by 9,2 kg or 8,3 %. The results obtained prove the expediency of using stallpasture technology in the dry-steppe zone of the Southern Federal district when rearing young animals for beef up to 350–400 kg live weight at 15 months of age and its subsequent intensive rearing under industrial technology, in order to obtain the live weight of more than 570 kg and produce cost-eff ective beef.

Method of experimental evaluation of the efficiency coefficient of vibration protection of the rope-rod coupling "MAMSAR+A" of the diesel generator set DGA-8.83

2021 ◽  
pp. 88-95
Author(s):  
М.А. Минасян ◽  
А.М. Минасян ◽  
Ц. Цзэн
Keyword(s):  
Experimental Evaluation ◽  
Vibration Isolation ◽  
Experimental Studies ◽  
Original Method ◽  
Efficiency Coefficient ◽  
Diesel Generator ◽  
Vibration Protection ◽  
Rigid Connection ◽  
Two Stages

Объектом исследования является опытный образец запатентованной канатностержневой муфты (КСМ) «MAMSAR+А» в качестве привода дизель-генераторного агрегата ДГА-8,83 мощностью 9,56 кВт при частоте вращения 1500 мин-1 с дизелем 2Ч 8,5/11 и генератором «ГК-5,6». Целью исследования является экспериментальная оценка коэффициента эффективности вибрационной защиты КСМ. Поставленная цель достигается разработкой и реализацией оригинальной методики экспериментальной оценки коэффициента эффективности КСМ с анализом и выводами результатов экспериментальных исследований. Экспериментальные исследования проводятся в два этапа. Первый этап – с упругим соединением КСМ, второй этап – с жестким соединением. Оригинальность методики экспериментальной оценки коэффициента эффективности вибрационной защиты КСМ главным образом заключается в том, что между двумя этапами экспериментальных исследований КСМ не демонтируется. Следовательно, качество центровки не нарушается. Усредненный коэффициент эффективности виброизоляции КСМ составляет от 3 до 8 дБ. The object of this research is a prototype of the patented wire rope coupling (KSM) "MAMSAR+A" as a drive for a diesel-generator unit DGA-8.83 with a power of 9.56 kW at a speed of 1500 min-1 with a 2CH 8.5/11 diesel engine and a generator "KG-5.6". The aim of the research is to experimentally evaluate the efficiency coefficient of vibration protection of the KSM. This goal is achieved by developing and implementing an original method for experimental evaluation the efficiency coefficient of the KSM with analysis and conclusions of the results of experimental studies. Experimental studies are conducted in two stages. The first stage - with an elastic connection of the coupling, the second stage - with a rigid connection. The originality of the method of experimental evaluation of the efficiency coefficient of vibration protection of the KSM mainly lies in the fact that the KSM is not dismantled between the two stages of experimental research. Therefore, the quality of alignment is not violated. The average coefficient of vibration isolation efficiency of the KSM is from 3 to 8 dB.

CONSUMER PROPERTIES OF PASTA WITH POWDER FROM MARIGOLD INFLORESCENCES (TAGETES L.)

2021 ◽  
Vol 40 (4) ◽  
pp. 102-112
Author(s):  
SHAPOVALOVA Nataliia ◽  
VEZHLIVTSEVA Svitlana ◽  
ANTIUSHKO Dmytro
Keyword(s):  
Raw Materials ◽  
Experimental Studies ◽  
The Body ◽  
Biologically Active Substances ◽  
Biologically Active ◽  
Organoleptic Properties ◽  
Biological Value ◽  
Plant Raw Materials ◽  
Active Substances

Background. The deficiency of essential nutrients in the human body is the root cause of reduced efficiency, general resistance of the body to various diseases. That is an urgent problem in the context of the spread of coronavirus infection. In this regard, the search for opportunities to meet the needs of the population in food products that contain biologically active substances (BAS) through the use of high-value and at the same time available plant raw materials is extremely important. Marigolds attract special attention among such raw materials. The aim of the work is to study the chemical composition and evaluate the consumer properties of Tagetes L. varieties, zoned in the Kiev region, to prove the possibility of increasing the biological value of pasta by adding to their recipe powder from marigold inflorescences. Materials and methods. The object of research is pasta of B group (noodles). Inflorescences of marigolds of different varieties gathered during the flowering period in July-September 2019–2020 in the territory of Vasylkiv and Obukhiv districts of Kyiv region, Ukraine were used as enriching plant raw materials. The quality of finished pasta was assessed by organoleptic and physicochemical indexes (moisture content and titratable acidity). The content of mineral elements in the fine powder of marigold inflorescences was determined on the EXHERT-3L device, the quantitative composition and BAS identification – by spectrophotometric analysis on the device Specord-200 Analytic Jena UV-vis. The integrated quality index of pasta products was calculated taking into account the importance factors of individual indexes. Results. Comparing the obtained results, we can state that all the studied varieties – Gold Kopfen, Orange Flame, Hawaii, Equinox are characterized by high biological value, regardless of the area of collection. As a result of calculated and experimental studies it was determined that the addition of 7 % of the supplement does not provide the required supply of vitamins and minerals. Replacing the flour in the recipe by 20 % significantly improves the mineral composition, but deteriorates the taste and aromatic properties of pasta. The most optimal and rational amount of added additive is 15 %, as it improves the organoleptic properties of pasta and enriches their BAS. Conclusion. The usage of non-traditional vegetable raw materials, in particular powder from marigold inflorescences, which is rich in biologically active substances, allows not only to expand the range, improve the quality of finished products, but also increase the biological value of the product. The optimal amount of additive –powder from marigold inflorescences, was defined. It is 15 % by weight of flour in the production of noodles. This concentration allows not only to improve the organoleptic properties, but also to increase the content of biologically active substances – vitamins, micro- and macronutrients. The usage of non-traditional natural raw materials (powder from marigold inflorescences) allows to abandon artificial colorsand give the finished pasta a pleasant colorand aroma.

Responses and Optimization of a PID-Based Speed Regulating System of the Planetary Mixer

2011 ◽  
Vol 418-420 ◽  
pp. 1865-1868
Author(s):  
Ming Jin Yang ◽  
Xi Wen Li ◽  
Zhi Gang Wang ◽  
Tie Lin Shi
Keyword(s):  
Control System ◽  
Open Loop ◽  
Open Loop Control ◽  
Efficient Operation ◽  
Loop Control ◽  
Loop Control System ◽  
Response Optimization ◽  
Close Loop Control ◽  
Close Loop Control System

The performance of speed regulating is very important to the mixing process with safe, efficient operation and high quality of production. Strategies and practices of responses and optimization of a PID-based speed regulating system of a planetary mixer were presented in this paper. Research results show that: by means of the signal constraint function presented by Simulink Response Optimization, optimization PID parameters of the 2-DOF-PID controller can be obtained, and the response of close-loop control system has quite good performance of overshoot, response time, and stability compared with an open-loop control system.

Kean Miltos: The Well-Known Iron Oxides of Antiquity

1997 ◽  
Vol 92 ◽  
pp. 359-371 ◽  
Author(s):  
E. Photos-Jones ◽  
A. Cottier ◽  
A. J. Hall ◽  
L. G. Mendoni
Keyword(s):  
Iron Oxides ◽  
Analytical Techniques ◽  
Field Work ◽  
Archaeological Record ◽  
The North ◽  
Naturally Occurring ◽  
Physico Chemical ◽  
Wide Range ◽  
Industrial Mineral

The island of Kea in the North Cyclades was well known in antiquity for its miltos, a naturally occurring red iron oxide valued for its colour and wide range of applications. By combining geological field work, physico-chemical analytical techniques, simulation (heating) experiments as well as simple laboratory tests, this paper describes the study of Kean iron oxides in an attempt to characterize this material which is still largely elusive in the archaeological record. The present work corroborates previous observations about the superior quality of some Kean iron oxides. Furthermore, it puts forward the hypothesis that miltos may have been considered an industrial mineral, and as such may have been used as an umbrella term for a variety of materials including mineralogically distinct purple as well as red iron oxides.

Effect of Abrasive Tools in Galvanomechanical Treatment on the Roughness of the Deposited Chromium Layer

2018 ◽  
Vol 284 ◽  
pp. 1178-1183 ◽  
Author(s):  
D.A. Zherebtcov ◽  
Oksana N. Gruba ◽  
K.R. Smolyakova
Keyword(s):  
Experimental Studies ◽  
The Body ◽  
Abrasive Tool ◽  
Chromium Layer ◽  
Pressing Force ◽  
Hard Chromium ◽  
Chromium Plating ◽  
Cylindrical Parts ◽  
Abrasive Tools

The article deals with the method of obtaining a hard chromium coating on details of the "body of rotation" type with the use of an abrasive tool. The influence of the composition and hardness of the elastic abrasive tool on the results of galvanomechanical chromium plating of rotating cylindrical parts has been studied. Binder compositions for an abrasive tool used to improve the roughness of the deposited chromium layer have been developed. A series of experimental studies has been carried out with chromium plating of steel cylindrical parts with simultaneous abrasive processing. Beforehand, an abrasive tool with previously developed binder formulations was manufactured. The obtained results of the influence of the characteristics of the abrasive tool and its pressing force on the chromium-plated part on the quality of the precipitated chromium made it possible to determine the optimum modes for obtaining a coating of the required thickness. Also, a suitable abrasive tool has been chosen to obtain a coating of proper quality.

scholarly journals Impact of eating disorders on paid or unpaid work participation and performance: a systematic review and meta-analysis protocol

2022 ◽  
Vol 10 (1) ◽  
Author(s):  
Fatima Safi ◽  
Anna M. Aniserowicz ◽  
Heather Colquhoun ◽  
Jill Stier ◽  
Behdin Nowrouzi-Kia
Keyword(s):  
Systematic Review ◽  
Eating Disorders ◽  
Meta Analysis ◽  
Experimental Studies ◽  
Work Participation ◽  
Unpaid Work ◽  
Cochrane Library ◽  
And Performance ◽  
The Impact

Abstract Background Eating disorders (ED) can reduce quality of life by limiting participation and performance in social and occupational roles, including paid or unpaid work. The association between ED pathologies and work participation and performance must be well understood to strengthen vocational rehabilitation programmes and prevent occupational disruptions in the ED population. The aims of this study are: (1) to examine the degree of association between ED pathologies and work participation and performance in 15-year-olds and older; (2) to highlight the specific ED symptoms that are most correlated with changes in work performance and participation; (3) to compile the most common metrics and assessments used to measure work participation and performance with ED. Methods Medline, Embase, CINAHL, Web of Science, PsycINFO, and Cochrane Library will be searched for observational and experimental studies that meet the following criteria: (1) a clinical sample of typical or atypical ED; (2) paid or unpaid employment or training; (3) an association between ED pathologies and work participation or performance. Unpublished data will also be examined. Title and abstract, and full-text screening will be conducted in duplicate. Risk of bias and quality of evidence assessments will be completed. A random-effect meta-analysis will be performed. Discussion This synthesis can clarify knowledge and gaps around the impact of ED on work functioning, thereby allowing better evaluation, improvements and development of current workplace assessments, interventions, and policies. Trial registration The registration number for this systematic review on PROSPERO is CRD42021255055.

Sign in / Sign up

Export Citation Format

Share Document