scholarly journals Indoor monitoring of Scrovegni Chapel Crypt

2019 ◽  
Vol 111 ◽  
pp. 02075
Author(s):  
Paolo Bison ◽  
Alessandro Bortolin ◽  
Gianluca Cadelano ◽  
Giovanni Ferrarini ◽  
Fabio Peron ◽  
...  

The indoor microclimate of the Scrovegni Chapel in Padova (Italy) was analysed first in the ‘80s. The early study operates in the best way for what concerns the choice of measurement devices and their positioning. Starting from 1995 a Scientific-technical Board coordinates the various initiatives commissioned for the surveys of a conservation of the Scrovegni building structures and for the preservation of frescos. However only during the last ten years, the activities of the Board have been addressed also on the study of the hypogeal environments under the Chapel and in the external environment around it in order to prevent possible damage due to the presence of water which frequently submerges the floor and part of the vertical structures of the crypt (perimeter walls and brick partitions). The investigations have been therefore extended to the crypt. The present work reports the preliminary results of the cyclical survey campaign launched last year and still ongoing: passive thermographic techniques (non-invasive and non-destructive) have been used for the identification and the investigation of the relationship between the boundary seasonal thermohygrometric conditions and the rainfall variations and other exogenous phenomena related to the complex water system of the area on which the Scrovegni Chapel stands.

2012 ◽  
Vol 39 (11) ◽  
pp. 813 ◽  
Author(s):  
Roland Pieruschka ◽  
Hendrik Poorter

No matter how fascinating the discoveries in the field of molecular biology are, in the end it is the phenotype that matters. In this paper we pay attention to various aspects of plant phenotyping. The challenges to unravel the relationship between genotype and phenotype are discussed, as well as the case where ‘plants do not have a phenotype’. More emphasis has to be placed on automation to match the increased output in the molecular sciences with analysis of relevant traits under laboratory, greenhouse and field conditions. Currently, non-destructive measurements with cameras are becoming widely used to assess plant structural properties, but a wider range of non-invasive approaches and evaluation tools has to be developed to combine physiologically meaningful data with structural information of plants. Another field requiring major progress is the handling and processing of data. A better e-infrastructure will enable easier establishment of links between phenotypic traits and genetic data. In the final part of this paper we briefly introduce the range of contributions that form the core of a special issue of this journal on plant phenotyping.


The main provisions of the concept of technology of diamond cutting and drilling of building structures are considered. The innovativeness of the technology, its main possibilities and advantages are presented. Carrying out works with the help of this technology in underwater conditions expands its use when constructing and reconstructing hydraulic structure. The use of diamond drilling equipment with motors equipped with an internal combustion engine is considered. Drilling holes with a variable diameter during the reconstruction of the runways of airfields makes it possible to combine the landing mats into a single structure. The ability to cut inside the concrete mass, parallel to the front surface, has no analogues among the methods of concrete treatment. The use of this technology for producing blind openings in the body of concrete without weakening the structure is also unique. Work with precision quality in cutting and diamond drilling of concrete and reinforced concrete was noted by architects and began to be implemented in the manufacture of inter-room and inter-floor openings. Non-destructive approach to the fragmentation of building structures allows them to be reused. The technology of diamond cutting and drilling is located at the junction of new construction, repair, reconstruction of buildings and structures, and dismantling of structures. Attention is paid to the complexity and combinatorial application of diamond technology. Economic efficiency and ecological safety of diamond technology are presented. The main directions of further research for the development of technology are indicated.


2020 ◽  
Vol 19 (3) ◽  
pp. 243-249 ◽  
Author(s):  
Sevket Balta

: Vascular diseases are the main reason for morbidity and mortality worldwide. As we know, the earlier phase of vascular diseases is endothelial dysfunction in humans, the endothelial tissues play an important role in inflammation, coagulation, and angiogenesis, via organizing ligand-receptor associations and the various mediators’ secretion. We can use many inflammatory non-invasive tests (flowmediated dilatation, epicedial fat thickness, carotid-intima media thickness, arterial stiffness and anklebrachial index) for assessing the endothelial function. In addition, many biomarkers (ischemia modified albumin, pentraxin-3, E-selectin, angiopoietin, endothelial cell specific molecule 1, asymmetrical dimethylarginine, von Willebrand factor, endothelial microparticles and endothelial progenitor cells) can be used to evaluate endothelial dysfunction. We have focused on the relationship between endothelial dysfunction and inflammatory markers of vascular disease in this review.


2021 ◽  
Vol 11 (3) ◽  
pp. 1341
Author(s):  
María Higuera ◽  
José M. Perales ◽  
María-Luisa Rapún ◽  
José M. Vega

A review of available results on non-destructive testing of physical systems, using the concept of topological sensitivity, is presented. This mathematical tool estimates the sensitivity of a set of measurements in some given sensors, distributed along the system, to defects/flaws that produce a degradation of the system. Such degradation manifests itself on the properties of the system. The good performance of this general purpose post-processing method is reviewed and illustrated in some applications involving non-destructive testing. These applications include structural health monitoring, considering both elastodynamic ultrasonic guided Lamb waves and active infrared thermography. Related methods can also be used in other fields, such as diagnosis/prognosis of engineering devices, which is also considered.


Animals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2200
Author(s):  
Ruben X. G. Silva ◽  
Paulo Cartaxana ◽  
Ricardo Calado

Berghia stephanieae is a stenophagous sea slug that preys upon glass anemones, such as Exaiptasia diaphana. Glass anemones host photosynthetic dinoflagellate endosymbionts that sea slugs ingest when consuming E. diaphana. However, the prevalence of these photosynthetic dinoflagellate endosymbionts in sea slugs appears to be short-lived, particularly if B.stephanieae is deprived of prey that host these microalgae (e.g., during bleaching events impacting glass anemones). In the present study, we investigated this scenario, along with food deprivation, and validated the use of a non-invasive and non-destructive approach employing chlorophyll fluorescence as a proxy to monitor the persistence of the association between sea slugs and endosymbiotic photosynthetic dinoflagellates acquired through the consumption of glass anemones. Berghia stephanieae deprived of a trophic source hosting photosynthetic dinoflagellate endosymbionts (e.g., through food deprivation or by feeding on bleached E. diaphana) showed a rapid decrease in minimum fluorescence (Fo) and photosynthetic efficiency (Fv/Fm) when compared to sea slugs fed with symbiotic anemones. A complete loss of endosymbionts was observed within 8 days, confirming that no true symbiotic association was established. The present work opens a new window of opportunity to rapidly monitor in vivo and over time the prevalence of associations between sea slugs and photosynthetic dinoflagellate endosymbionts, particularly during bleaching events that prevent sea slugs from incorporating new microalgae through trophic interactions.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Supakorn Harnsoongnoen ◽  
Nuananong Jaroensuk

AbstractThe water displacement and flotation are two of the most accurate and rapid methods for grading and assessing freshness of agricultural products based on density determination. However, these techniques are still not suitable for use in agricultural inspections of products such as eggs that absorb water which can be considered intrusive or destructive and can affect the result of measurements. Here we present a novel proposal for a method of non-destructive, non-invasive, low cost, simple and real—time monitoring of the grading and freshness assessment of eggs based on density detection using machine vision and a weighing sensor. This is the first proposal that divides egg freshness into intervals through density measurements. The machine vision system was developed for the measurement of external physical characteristics (length and breadth) of eggs for evaluating their volume. The weighing system was developed for the measurement of the weight of the egg. Egg weight and volume were used to calculate density for grading and egg freshness assessment. The proposed system could measure the weight, volume and density with an accuracy of 99.88%, 98.26% and 99.02%, respectively. The results showed that the weight and freshness of eggs stored at room temperature decreased with storage time. The relationship between density and percentage of freshness was linear for the all sizes of eggs, the coefficient of determination (R2) of 0.9982, 0.9999, 0.9996, 0.9996 and 0.9994 for classified egg size classified 0, 1, 2, 3 and 4, respectively. This study shows that egg freshness can be determined through density without using water to test for water displacement or egg flotation which has future potential as a measuring system important for the poultry industry.


Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4397
Author(s):  
Kazuya Kikunaga

A mixture of positive and negative static charges exists in the same plane on an insulator surface, and this can cause production quality problems at manufacturing sites. This study developed a system with a vibration array sensor to rapidly measure the surface potential distribution of an object in a non-contact and non-destructive manner and with a high spatial resolution of 1 mm. The measurement accuracy differed greatly depending on the scanning speed of the array sensor, and an optimum scanning speed of 10 mm/s enabled rapid measurements (within <3 s) of the surface potential distribution of a charged insulator (area of 30 mm × 30 mm) with an accuracy of 15%. The relationship between charge and dust on the surface was clarified to easily visualize the uneven static charges present on it and thereby eliminate static electricity.


Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3697
Author(s):  
Valeria Stagno ◽  
Chiara Genova ◽  
Nicole Zoratto ◽  
Gabriele Favero ◽  
Silvia Capuani

In this work, we investigated the potential of PVA-borax hydrogel for cleaning limestones and the dependence of the cleaning on the porosity of the rock and on the action time of the hydrogel treatment. Towards this goal, we used a nuclear magnetic resonance (NMR) spectrometer, developed for non-invasive and non-destructive applications on cultural heritage. T2-NMR parameters were quantified on different samples of Lecce stone and Travertine cut perpendicular (Pe) and parallel (Pa) to the bedding planes under different experimental conditions: untreated samples, treated with Paraloid B72 and cleaned with PVA-PEO-borax hydrogel applied for 4 min and 2 h. The T2 results suggest that the effectiveness of the cleaning strongly depended on the porosity of the stones. In Lecce stone, the hydrogel seemed to eliminate both the paramagnetic impurities (in equal measure with 4 min and 2 h treatment) and Paraloid B72. In Travertine Pe, characterized by a smaller pore size compared to Lecce stone, no significant effects were found regarding both the cleaning and the treatment with Paraloid B72. In Travertine Pa, characterized by a larger pore size than the other two samples, the hydrogel seemed to clean the paramagnetic agents (it worked better if applied for a longer time) but it did not appear to have any effect on Paraloid B72 removal.


2010 ◽  
Vol 4 (2) ◽  
pp. 34 ◽  
Author(s):  
Ian B. Wilkinson ◽  
Carmel M. McEniery ◽  
Giuseppe Schillaci ◽  
Pierre Boutouyrie ◽  
Patrick Segers ◽  
...  

Author(s):  
Xuanhe Li ◽  
Liangliang Lin ◽  
Wei-Hung Chiang ◽  
Kuan Chang ◽  
Hujun Xu

Surface enhanced Raman scattering (SERS) is a powerful and sensitive spectroscopic technique that allows for rapid detection of trace-level chemical species in a non-invasive and non-destructive manner. In the present...


Sign in / Sign up

Export Citation Format

Share Document