Microwave-Assisted Grafting to MCM-41 Silica and its Application as Catalyst in Flow Chemistry

2011 ◽  
Vol 64 (11) ◽  
pp. 1522 ◽  
Author(s):  
Manuela Oliverio ◽  
Antonio Procopio ◽  
Toma N. Glasnov ◽  
Walter Goessler ◽  
C. Oliver Kappe

Finding environmentally gentle methods to graft Lewis acid on the surface of mesoporous materials is a topic of current interest. Herein we describe the optimization of a preparation procedure of a mesoporous silica-supported ErIII catalyst using the microwave-assisted post-calcination functionalization of Mobil Composition of Matter-41 silica as the key step. The required time for functionalization was reduced from several hours to 10 min using sealed-vessel microwave technology. Control experiments using conventional heating at the same temperature demonstrated that the rate increase is owing to a simple thermal/kinetic effect as a result of the higher reaction temperature. The resulting ErIII catalyst was tested for the first time as a catalyst in the continuous flow deprotection of benzaldehyde dimethylacetal and a complete leaching study was performed.

2011 ◽  
Vol 233-235 ◽  
pp. 1451-1454
Author(s):  
Jun Qiang Xu ◽  
Wei Chu ◽  
Fang Guo ◽  
Xue Jun Quan

Mesoporous V-MCM-41 materials with good hydrothermal stability had been synthesized by microwave-assisted hydrothermal method. The samples by microwave-assisted hydrothermal synthesis and conventional heating remain the same mesoporous structure by XRD and N2adsorption analysis. The V-MCM-41 materials by microwave-assisted hydrothermal synthesis show the good hydrothermal stability, close to that of the materials by conventional heating. The high surface area of the sample by 720 W microwave treatment for 8 min was the same as that of the sample by conventional heating (110 °C for 12 h).


Catalysts ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 166
Author(s):  
Remi Nguyen ◽  
Nicolas Galy ◽  
Fatmah Alasmary ◽  
Christophe Len

The continuous oligomerization of glycerol for the formation of polyglycerol was carried out for the first time under microwave activation. In the presence of potassium carbonate, we studied the ease of handling, effects of temperature, flow rate and residence time of an inexpensive homogeneous commercial catalyst. The main linear and branched-chain diglycerol and triglycerol regioisomers were characterized and the quantification of the different isomers was realized. Successive cyclic mode processes followed by short distance distillation allowed the mixture to be enriched with glycerol ethers and thus to obtain a mixture of diglycerol (50.2 wt%), triglycerol (22.1 wt%), tetraglycerol (9.5 wt%), and pentaglycerol (4.3 wt%).


2020 ◽  
Author(s):  
Tomas Hardwick ◽  
Rossana Cicala ◽  
Nisar Ahmed

<p>Many chiral compounds have become of great interest to the pharmaceutical industry as they possess various biological activities. Concurrently, the concept of “memory of chirality” has been proven as a powerful tool in asymmetric synthesis, while flow chemistry has begun its rise as a new enabling technology to add to the ever increasing arsenal of techniques available to the modern day chemist. Here, we have employed a new simple electrochemical microreactor design to oxidise an L-proline derivative at room temperature in continuous flow. Flow performed in microreactors offers up a number of benefits allowing reactions to be performed in a more convenient and safer manner, and even allow electrochemical reactions to take place without a supporting electrolyte due to a very short interelectrode distance. By the comparison of electrochemical oxidations in batch and flow we have found that continuous flow is able to outperform its batch counterpart, producing a good yield (71%) and a better enantiomeric excess (64%) than batch with a 98% conversion. We have, therefore, provided evidence that continuous flow chemistry has the potential to act as a new enabling technology to replace some aspects of conventional batch processes. </p>


2019 ◽  
Author(s):  
Victor Y. Suzuki ◽  
Luís Henrique Cardozo Amorin ◽  
Natália H. de Paula ◽  
Anderson R. Albuquerque ◽  
Julio Ricardo Sambrano ◽  
...  

<p>We report, for the first time, new insights into the nature of the band gap of <a>CuGeO<sub>3</sub> </a>(CGO) nanocrystals synthesized from a microwave-assisted hydrothermal method in the presence of citrate. To the best of our knowledge, this synthetic approach has the shortest reaction time and it works at the lowest temperatures reported in the literature for the preparation of these materials. The influence of the surfactant on the structural, electronic, optical, and photocatalytic properties of CGO nanocrystals is discussed by a combination of experimental and theoretical approaches, and that results elucidates the nature of the band gap of synthetized CGO nanocrystals. We believe that this particular strategy is one of the most critical parameters for the development of innovative applications and that result could shed some light on the emerging material design with entirely new properties.</p> <p><b> </b></p>


2019 ◽  
Vol 16 (3) ◽  
pp. 194-201 ◽  
Author(s):  
Renu Bala ◽  
Vandana Devi ◽  
Pratibha Singh ◽  
Navjot Kaur ◽  
Pawandeep Kaur ◽  
...  

Background: Tetrahydroindazole, a member of the fused-pyrazole system, is a least studied class of heterocyclic compounds owing to its scarcity in nature. However, a large number of synthetically prepared tetrahydroindazoles are known to show a variety of biological activities such as interleukin- 2 inducible T-Cell kinase inhibitors, AMPA receptor positive allosteric modulators, antitumor, antituberculosis, anti-inflammatory and antimicrobial activities. Vilsmeier-Haack reaction is one of the most important chemical reactions used for formylation of electron rich arenes. Even though Vilsmeier- Haack reaction was studied on a wide variety of hydrazones derived from active methylene compounds, literature lacks the examples of the use of 4-substituted cyclohexanones as a substrate for the synthesis of 4,5,6,7-tetrahydroindazoles. The study of the reaction of Vilsmeier-Haack reagent with hydrazones derived from cyclic keto compounds having active methylene has been considered the interested topic of investigation. In the present study, ethyl cyclohexanone-4-carboxylate was treated with one equivalent of various hydrazines for two hours and the resulted hydrazones were further treated with an OPC-VH reagent (Vilsmeier-Haack reagent isolated from phthaloyl dichloride and N,Ndimethylformamide) afforded 4,5,6,7-tetrahydroindazoles in excellent yields. The synthesized compounds 4a-f and 5a-f were screened for their antioxidant activities using the DPPH radical scavenging assay. The target compounds were synthesized regioselectively using 4+1 approach in excellent yields. A number of experiments using both conventional heating as well as microwave irradiation methods were tried and on comparison, microwave irradiation method was found excellent in terms of easy work up, high chemical yields, shortened reaction times, clean and, no by-products formation. Some of the synthesized compounds showed significant antioxidant activity. The microwave assisted synthesis of 4,5,6,7-tetrahydroindazoles from ethyl cyclohexanone-4-carboxylate has been reported under mild conditions in excellent yield. Easy work up, high chemical yield, shortened reaction times, clean and no by-products formation are the major advantages of this protocol. These advantages may make this method useful for chemists who are interested in developing novel 4,5,6,7-tetrahydroindazole based drugs.


2019 ◽  
Vol 16 (2) ◽  
pp. 117-121 ◽  
Author(s):  
Peipei Han ◽  
Wenhua Zhou ◽  
Mingxia Chen ◽  
Qiuan Wang

A series of eight polymethoxychalcone Mannich base derivatives 2a-2h was synthesized via the microwave-assisted Mannich reaction of natural product 2&#039;-hydroxy-3,4,4&#039;,5,6&#039;-pentamethoxychalcone (1) with various secondary amines and formaldehyde. Compared to conventional heating method (80&#176;C), the microwave-assisted method (700W, 65&#176;C) is efficient with short reaction time (0.5-1 h) and good yields (74-88%). The antiproliferative activities of eight Mannich base derivatives were evaluated in vitro on a panel of three human cancer cell lines (Hela, HCC1954 and SK-OV-3) by CCK-8 assay. The results showed that all of the Mannich base derivatives exhibited potential antiproliferative activities on tested cancer cell lines with the IC50 values of 9.13-48.51 &#181;M. Some active compounds exhibited more activity as compared to positive control cis-Platin. Among them, compound 2b revealed to have the strongest antiproliferative activity against all the three cancer cell lines with IC50 values ranging from 9.13 to 11.24 &#181;M.


2020 ◽  
Vol 7 (3) ◽  
pp. 183-195
Author(s):  
Musa Özil ◽  
Emre Menteşe

Background: Benzoxazole, containing a 1,3-oxazole system fused with a benzene ring, has a profound effect on medicinal chemistry research owing to its important pharmacological activities. On the other hand, the benzoxazole derivative has exhibited important properties in material science. Especially in recent years, microwave-assisted synthesis is a technique that can be used to increase diversity and quick research in modern chemistry. The utilization of microwave irradiation is beneficial for the synthesis of benzoxazole in recent years. In this focused review, we provide a metaanalysis of studies on benzoxazole in different reaction conditions, catalysts, and starting materials by microwave technique so far, which is different from conventional heating. Methods: Synthesis of different kind of benzoxazole derivatives have been carried out by microwave irradiation. The most used method to obtain benzoxazoles is the condensation of 2-aminophenol or its derivatives with aldehydes, carboxylic acids, nitriles, isocyanates, and aliphatic amines. Results: Benzoxazole system and its derivatives have exhibited a broad range of pharmacological properties. Thus, many scientists have remarked on the importance of the synthesis of different benzoxazole derivatives. Conventional heating is a relatively inefficient and slow method to convey energy in orientation to the reaction medium. However, the microwave-assisted heating technique is a more effective interior heating by straight coupling of microwave energy with the molecules. Conclusion: In this review, different studies were presented on the recent details accessible in the microwave- assisted techniques on the synthesis of the benzoxazole ring. It presents all examples of such compounds that have been reported from 1996 to the present. Benzoxazoles showed an extensive class of chemical substances not only in pharmaceutical chemistry but also in dyestuff, polymer industries, agrochemical, and optical brighteners. Thus the development of fast and efficient achievement of benzoxazoles with a diversity of substituents in high yield is getting more noteworthy. As shown in this review, microwave-assisted synthesis of benzoxazoles is a very effective and useful technique.


Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2882
Author(s):  
José Miranda de Carvalho ◽  
Cássio Cardoso Santos Pedroso ◽  
Matheus Salgado de Nichile Saula ◽  
Maria Claudia França Cunha Felinto ◽  
Hermi Felinto de Brito

Luminescent inorganic materials are used in several technological applications such as light-emitting displays, white LEDs for illumination, bioimaging, and photodynamic therapy. Usually, inorganic phosphors (e.g., complex oxides, silicates) need high temperatures and, in some cases, specific atmospheres to be formed or to obtain a homogeneous composition. Low ionic diffusion and high melting points of the precursors lead to long processing times in these solid-state syntheses with a cost in energy consumption when conventional heating methods are applied. Microwave-assisted synthesis relies on selective, volumetric heating attributed to the electromagnetic radiation interaction with the matter. The microwave heating allows for rapid heating rates and small temperature gradients yielding homogeneous, well-formed materials swiftly. Luminescent inorganic materials can benefit significantly from the microwave-assisted synthesis for high homogeneity, diverse morphology, and rapid screening of different compositions. The rapid screening allows for fast material investigation, whereas the benefits of enhanced homogeneity include improvement in the optical properties such as quantum yields and storage capacity.


Author(s):  
Nicole Candice Neyt ◽  
Darren Lyall Riley

The adoption of flow technology for the manufacture of chemical entities, and in particular pharmaceuticals, has seen rapid growth over the past two decades with the technology now blurring the...


Sign in / Sign up

Export Citation Format

Share Document