scholarly journals Disturbance is the key to plant invasions in cold environments

2016 ◽  
Vol 113 (49) ◽  
pp. 14061-14066 ◽  
Author(s):  
Jonas J. Lembrechts ◽  
Aníbal Pauchard ◽  
Jonathan Lenoir ◽  
Martín A. Nuñez ◽  
Charly Geron ◽  
...  

Until now, nonnative plant species were rarely found at high elevations and latitudes. However, partly because of climate warming, biological invasions are now on the rise in these extremely cold environments. These plant invasions make it timely to undertake a thorough experimental assessment of what has previously been holding them back. This knowledge is key to developing efficient management of the increasing risks of cold-climate invasions. Here, we integrate human interventions (i.e., disturbance, nutrient addition, and propagule input) and climatic factors (i.e., temperature) into one seed-addition experiment across two continents: the subantarctic Andes and subarctic Scandinavian mountains (Scandes), to disentangle their roles in limiting or favoring plant invasions. Disturbance was found as the main determinant of plant invader success (i.e., establishment, growth, and flowering) along the entire cold-climate gradient, explaining 40–60% of the total variance in our models, with no indication of any facilitative effect from the native vegetation. Higher nutrient levels additionally stimulated biomass production and flowering. Establishment and flowering displayed a hump-shaped response with increasing elevation, suggesting that competition is the main limit on invader success at low elevations, as opposed to low-growing-season temperatures at high elevations. Our experiment showed, however, that nonnative plants can establish, grow, and flower well above their current elevational limits in high-latitude mountains. We thus argue that cold-climate ecosystems are likely to see rapid increases in plant invasions in the near future as a result of a synergistic interaction between increasing human-mediated disturbances and climate warming.

2016 ◽  
Author(s):  
Monica H. Stone ◽  
Sagy Cohen

Abstract. Recent tropical cyclones, like Hurricane Katrina, have been some of the worst the United States has experienced. Tropical cyclones are expected to intensify, bringing about 20 % more precipitation, in the near future in response to global climate warming. Further, global climate warming may extend the hurricane season. This study focuses on four major river basins (Neches, Pearl, Mobile, and Roanoke) in the Southeast United States that are frequently impacted by tropical cyclones. An analysis of the timing of tropical cyclones that impact these river basins found that most occur during the low discharge season, and thus rarely produce riverine flooding conditions. However, an extension of the current hurricane season of June–November, due to global climate warming, could encroach upon the high discharge seasons in these basins, increasing the susceptibility for riverine hurricane-induced flooding. This analysis shows that an extension of the hurricane season to May–December (just 2 months longer) increased the number of days that would be at risk to flooding were the average tropical cyclone to occur by 37–258 %, depending on the timing of the hurricane season in relation to the high discharge seasons on these rivers. Future research should aim to extend this analysis to all river basins in the United States that are impacted by tropical cyclones in order to provide a bigger picture of which areas are likely to experience the worst increases in flooding risk due to a probable extension of the hurricane season with expected global climate change in the near future.


2021 ◽  
pp. 104-112
Author(s):  
V.O. Startsev ◽  
◽  
E.V. Nikolaev ◽  
A.M. Vardanyan ◽  
A.A. Nechaev ◽  
...  

The residual stresses in carbon fiber reinforced plastic (CFRP), based on VTkU-2.200 carbon fiber and VSC-14 cyanate ester resin, modified by nanoscale additives (astralen) were studied. Natural exposure was performed in a moderately cold climate. The influence of nanoadditives on mechanical and physical CFRP’s properties after 9 months of climatic testing was studied using the following properties: three-point bending strength, compression strength, coefficient of linear thermal expansion, glass transition temperature and residual stresses parameters. The increase of residual stresses after climatic testing was revealed.


2006 ◽  
Vol 7 (5) ◽  
pp. 1164-1171 ◽  
Author(s):  
Anne W. Nolin ◽  
Christopher Daly

Abstract One of the most visible and widely felt impacts of climate warming is the change (mostly loss) of low-elevation snow cover in the midlatitudes. Snow cover that accumulates at temperatures close to the ice-water phase transition is at greater risk to climate warming than cold climate snowpacks because it affects both precipitation phase and ablation rates. This study maps areas in the Pacific Northwest region of the United States that are potentially at risk of converting from a snow-dominated to a rain-dominated winter precipitation regime, under a climate-warming scenario. A data-driven, climatological approach of snow cover classification is used to reveal these “at risk” snow zones and also to examine the relative frequency of warm winters for the region. For a rain versus snow temperature threshold of 0°C the at-risk snow class covers an area of about 9200 km2 in the Pacific Northwest region and represents approximately 6.5 km3 of water. Many areas of the Pacific Northwest would see an increase in the number of warm winters, but the impacts would likely be concentrated in the Cascade and Olympic Ranges. A number of lower-elevation ski areas could experience negative impacts because of the shift from winter snows to winter rains. The results of this study point to the potential for using existing datasets to better understand the potential impacts of climate warming.


Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1438 ◽  
Author(s):  
Eom ◽  
Lee ◽  
Lee

Novel materials have been recently developed for coping with various environmental factors. Generally, to improve the thermal comfort to humans in cold environments, securing an air layer is important. Therefore, this study analyzed the thermal properties of 3D spacer technical materials, 3D printed using thermoplastic polyurethane, according to the structural changes. Four 3D spacer technical material structures were designed with varying pore size and thickness. These samples were moved into a cold climate chamber (temperature 5 ± 1 °C, relative humidity (60 ± 5)%, wind velocity 0.2 m/s) and placed on a heating plate set to 30 °C. The surface and internal temperatures were measured after 0, 10, 20, and 30 min and then 10 min after turning off the heating plate. When heat was continuously supplied, the 3D spacer technical material with large pores and a thick air layer showed superior insulation among the materials. However, when no heat was supplied, the air gap thickness dominantly affected thermal insulation, regardless of the pore size. Hence, increasing the air gap is more beneficial than increasing the pore size. Notably, we found that the air gap can increase insulation efficiency, which is of importance to the new concept of 3D printing an interlining.


2016 ◽  
Vol 9 (5) ◽  
pp. 653-663 ◽  
Author(s):  
F. Wu ◽  
N.J. Mitchell

In the decades to come, the one factor that will likely have the greatest effect on the economics of the mycotoxin problem is climate change. This article reviews the current state of known science on how the global climate has been changing in recent decades, as well as likely climate change trends in the near future. The article focuses in depth on how climatic variables affect fungal infection and production of specific mycotoxins in food crops, and how near-future climatic changes will shape the prevalence of these mycotoxins in crops in different parts of the world. Because of regulatory limits set on maximum allowable levels of mycotoxins in food and feed, growers will experience economic losses if climatic factors cause certain mycotoxins to become more prevalent. A case study is presented of how maize growers in the United States will experience increased economic losses due to slightly higher aflatoxin levels in maize, even if those levels may still be below regulatory limits. We discuss the overall expected economic impacts of climate change-induced mycotoxin contamination worldwide – not just market-related losses, but also losses to human and animal health and risks to food security. Aflatoxin is the mycotoxin that is most likely to increase under near-future climate scenarios; and thus is likely to pose the greatest amount of economic risk of all the mycotoxins.


2016 ◽  
Vol 9 (8) ◽  
pp. 584-589 ◽  
Author(s):  
Filippo Giorgi ◽  
Csaba Torma ◽  
Erika Coppola ◽  
Nikolina Ban ◽  
Christoph Schär ◽  
...  

2021 ◽  
Vol 1201 (1) ◽  
pp. 012056
Author(s):  
R Brünig ◽  
E R Galea ◽  
B M Batalden ◽  
H A Oltedal

Abstract Adequate thermal protection for passengers travelling on-board vessels in cold climate regions, such as that provided by thermal protective immersion suits (TPIS), enhances passenger survivability in emergency situations, in particular those requiring the abandonment of the vessel. As emergency abandonment is a time critical process, it is essential to consider the time required to correctly don the TPIS. Testing standards, such as the International Maritime Organization guidelines, require that TPIS must be able to be donned within 2 minutes. Unfortunately, current practices quantifying donning times are questionable and so there is a limited evidence base that reliably quantifies donning times required by typical passengers. This paper presents a test procedure designed to reliably quantify the time required by test subjects to don the TPIS. Furthermore, the procedure assesses the donning correctness – a TPIS that is incorrectly donned is unlikely to offer appropriate thermal protection. The paper will also discuss the deficiencies in current practices to assess required donning time.


2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Chung-Huey Wu ◽  
Jeremy D. Holloway ◽  
Jane K. Hill ◽  
Chris D. Thomas ◽  
I-Ching Chen ◽  
...  

Abstract Both community composition changes due to species redistribution and within-species size shifts may alter body-size structures under climate warming. Here we assess the relative contribution of these processes in community-level body-size changes in tropical moth assemblages that moved uphill during a period of warming. Based on resurvey data for seven assemblages of geometrid moths (>8000 individuals) on Mt. Kinabalu, Borneo, in 1965 and 2007, we show significant wing-length reduction (mean shrinkage of 1.3% per species). Range shifts explain most size restructuring, due to uphill shifts of relatively small species, especially at high elevations. Overall, mean forewing length shrank by ca. 5%, much of which is accounted for by species range boundary shifts (3.9%), followed by within-boundary distribution changes (0.5%), and within-species size shrinkage (0.6%). We conclude that the effects of range shifting predominate, but considering species physiological responses is also important for understanding community size reorganization under climate warming.


2020 ◽  
Vol 66 (4) ◽  
pp. 393-402
Author(s):  
Shuai Yuan ◽  
Yonghong Zheng ◽  
Yongdong Qi ◽  
Fanxi Kong ◽  
Dan Wang ◽  
...  

Abstract Soil temperature can affect tree growth and is one of the most important types of basic data for forest cultivation and management. To obtain a long-term time series of soil temperatures, we explored the utility of dendroclimatology in a subtropical area of China. In this study, the relations between tree-ring-width chronologies and climate factors were explored by correlation analysis. The results indicated that the limiting climatic factors for the radial growth of Huangshan pine were elevation-specific. Further investigation found that chronology at high elevations was significantly correlated with soil temperature. Then, we described a reconstruction of the soil temperatures of the Dabie Mountains area using the tree-ring width chronology from 1869 to 2015 and showed that the reconstruction explained 42.9 percent of the instrumental soil temperature variation in the common years. We found that the 1970s and 2000s were the coldest and warmest decades since 1884, respectively. The results of the reconstruction method for describing past soil temperatures can provide a reference for other subtropical forests. Furthermore, the results of our research also have a certain significance for guiding policymaking related to forest cultivation and management.


2020 ◽  
Vol 21 (12) ◽  
pp. 543-548
Author(s):  
I.G. Lukachevskaya ◽  
◽  
M.P. Lebedev ◽  
N.F. Struchkov ◽  
◽  
...  

The influence of climatic factors on properties of basalt and fiberglass made by the infusion method has been studied by sequential laying some reinforcing material on the mold, impregnating with a three-component epoxy binder, consisting of ED-22, Iso-MTHFA, Agidol 53, and curing at a temperature of 160±2 °С, within 4 hours. Full-scale climatic tests of basalt fiber and fiberglass in a very cold climate zone demonstrated their resistance to climatic influences, which is confirmed by a high level of preservation of their strength parameters. Exposure of basalt fiber to natural conditions led to a decrease in tensile strength by 14% and an increase in flexural strength by 18%. The values of fiberglass increased by 9% (ultimate tensile strength) and 22% (ultimate tensile strength). Porosity measurements showed that after exposure, basalt-textolite samples increased open porosity by 62%, while glass-textolite samples decreased by 39%. After climatic tests, an increase in the average range of the inhomogeneities (Ra) of the surface of the basalt-textolite up to 0.48 μm (initial — 0.70 μm, after exposure — 1.18 μm). In fiberglass, the average roughness increases by 4 times after exposure (initial — 1.03 μm, after exposure — 4.08 μm).


Sign in / Sign up

Export Citation Format

Share Document