Tribological and Thermo-Mechanical Performance of Chemically Modified Musa Acuminata / Corchorus Capsularis Reinforced Hybrid Composites

2021 ◽  
pp. 1-14
Author(s):  
N Karthi ◽  
K Kumaresan ◽  
G Rajeshkumar ◽  
S Gokulkumar ◽  
S Sathish
2014 ◽  
Vol 33 (24) ◽  
pp. 2242-2254 ◽  
Author(s):  
R Yahaya ◽  
SM Sapuan ◽  
M Jawaid ◽  
Z Leman ◽  
ES Zainudin

2021 ◽  
Vol 32 ◽  
pp. 85-97
Author(s):  
Gunturu Bujjibabu ◽  
Vemulapalli Chittaranjan Das ◽  
Malkapuram Ramakrishna ◽  
Konduru Nagarjuna

Banana/Coir fiber reinforced polypropylene hybrid composites was formulated by using twin screw extruder and injection molding machine. Specimens were prepared untreated and treated B/C Hybrid composites with 4% and 8% of MA-g-PP to increase its compatibility with the polypropylene matrix. Both the without MA-g-PP and with MA-g-PP B/C hybrid composites was utilized and three levels of B/C fiber loadings 15/5, 10/10 and 5/15 % were used during manufacturing of B/C reinforced polypropylene hybrid composites. In this work mechanical performance (tensile, flexural and impact strengths) of untreated and treated (coupling agent) with 4% and 8% of MA-g-PP B/C fibers reinforced polypropylene hybrid composite have been investigated. Treated with MA-g-PP B/C fibers reinforced specimens explored better mechanical properties compared to untreated B/C fibers reinforced polypropylene hybrid composites. Mechanical tests represents that tensile, flexural and impact strength increases with increase in concentration of coupling agent compared to without coupling agent MA-g-PP hybrid composites . B/C fibers reinforced polymer composites exhibited higher tensile, flexural and impact strength at 5% of Banana fiber, 15% of fiber Coir in the presence of 8% of MA-g-PP compared to 4% of MA-g-PP and untreated hybrid composites. The percentage of water absorption in the B/C fibers reinforced polypropylene hybrid composites resisted due to the presence of coupling agent MA-g-PP and thermogravimetry analysis (TGA) also has done.


2003 ◽  
Vol 63 (10) ◽  
pp. 1377-1385 ◽  
Author(s):  
S Mishra ◽  
A.K Mohanty ◽  
L.T Drzal ◽  
M Misra ◽  
S Parija ◽  
...  

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 349 ◽  
Author(s):  
Ji-Won Park ◽  
Jae-Ho Shin ◽  
Gyu-Seong Shim ◽  
Kyeng-Bo Sim ◽  
Seong-Wook Jang ◽  
...  

In recent years, there has been an increasing need for materials that are environmentally friendly and have functional properties. Polylactic acid (PLA) is a biomass-based polymer, which has attracted research attention as an eco-friendly material. Various studies have been conducted on functionality imparting and performance improvement to extend the field of application of PLA. Particularly, research on natural fiber-reinforced composites have been conducted to simultaneously improve their environmental friendliness and mechanical strength. Research interest in hybrid composites using two or more fillers to realize multiple functions are also increasing. Phase change materials (PCMs) absorb and emit energy through phase transition and can be used as a micro encapsulated structure. In this study, we fabricated hybrid composites using microcapsulated PCM (MPCM) and the natural fibrous filler, kenaf. We aimed to fabricate a composite material with improved endothermic characteristics, mechanical performance, and environmental friendliness. We analyzed the endothermic properties of MPCM and the structural characteristics of two fillers and finally produced an eco-friendly composite material. The PCM and kenaf contents were varied to observe changes in the performance of the hybrid composites. The endothermic properties were determined through differential scanning calorimetry, whereas changes in the physical properties of the hybrid composite were determined by measuring the mechanical properties.


Author(s):  
Pankaj K Gupta ◽  
MK Gupta

The present work aims to enhance the mechanical performance of monolithic Al alloy and single reinforced metal matrix composite using a hybridization technique. The microparticles of alumina and boron carbide were reinforced into cast Al alloy (6061) in a systematic varying ratio (i.e.100/0, 75/25, 50/50, 25/75 and 0/100) to prepare the hybrid metal matrix composites via stir casting method. The mechanical properties (i.e. tensile, impact, hardness and flexural) of the prepared composites were investigated as per ASTM standards. Furthermore, microstructural analysis of unfractured and fractured composite samples was also carried out using Scanning Electron Microscope. It was observed that hybrid composites comprising of microparticles revealed an enhanced tensile, flexural and hardness properties, and reduced impact energy and porosity as compared to Al alloy and single reinforced metal matrix composites. The highest values of tensile strength and modulus were offered by a hybrid composite (B50A50), which was 40% and 52.12% higher than that of Al alloy. Furthermore, there was an improvement of 105.72% in flexural strength and a reduction of 23.88% in impact energy for composite B50A50 than that of Al alloy. The present developed hybrid metal matrix composites can be proposed to be used in automobile parts and construction applications.


2014 ◽  
Vol 70 (a1) ◽  
pp. C239-C239
Author(s):  
Wolfgang Schmahl ◽  
Erika Griesshaber ◽  
Lurdes Fernandez-Diaz ◽  
Andreas Ziegler ◽  
Klemens Kelm ◽  
...  

Skeletal parts and teeth of marine organisms, avian eggshells, trilobite and isopod eyes, and many more biomineralized tissues consist of bio-calcite or bio-aragonite crystals. We explore the nano- to micro-scale architectures of these materials by electron backscatter diffraction (EBSD) and complementary techniques. In contrast to their inorganic cousins the biogenic "crystals" are hybrid composites with small amounts of organic matrix controlling morphogenesis and critically improving mechanical performance or other functions. For the biominerals meso-crystal-like structures are ubiquitous, consisting of co-oriented nano-blocks with a mosaic-spread of a few degrees, depending on the organism and on the size of the mesocrystal entity[1, 2, 3]. The nano-mosaic can be attributed to growth by nano-particle accretion from an amorphous or gel-like precursor, where relics of organic matrix cause misorientations between the crystallized nano-blocks. Recently we were able to reproduce this feature in gel-grown calcite [Nindiyasari et al., Crystal Growth and Design, in press]. The mesocrystal-co-orientation spreads on to the micro- and even millimeter-scale, frequently with a fractal nature of co-oriented hierarchical units [Maier et al., Acta Biomaterialia, accepted for publication]. The hierarchically structured morphology of the composite crystal or polycrystal is always directed by organic matrix membranes. Sea urchin teeth show a multiplex composite crystal architecture, where different subunits of engineered shapes, Mg-contents, and small misalignments are essential prerequisites for self-sharpening [1]. The figure shows an EBSD map of dendritic interdigitating calcite crystals in an avian egg shell (color coding for crystal orientation) with an misorientation profile along the grey line.


Author(s):  
I. Yu. Vasilyev ◽  
V. V. Ananyev ◽  
V. V. Kolpakova ◽  
A. S. Sardzhveladze

Objectives. This work aimed to develop technology to produce biodegradable hybrid composite (BHC) films based on low-density polyethylene (LDPE) 115030-070 and thermoplastic starches (TPS) of various origins (corn, pea, and rice), with distilled monoglycerides as the plasticizer. The properties of the produced BHC films were studied and the optimal native starch : glycerol : monoglycerides ratio is proposed.Methods. TPS and BHC films based on this material were produced from different types of native starches in laboratory extruders (Brabender and MashPlast, Russia), and the extruded melts were subjected to ultrasonic vibrations. The structure and appearance of the BHC films were studied using scanning electron microscopy and rheology. Their biodegradability was assessed by immersing them in biocompost for three months. To evaluate the mechanical performance of the BHC films produced with and without ultrasound, the changes in tensile stress and elongation at break were determined during the biodegradation process.Results. The BHC films had a homogeneous structure, except small agglomerates (non-melted starch grains), which did not reduce their quality. The films with monoglycerides had high tensile strength, which was comparable with low-density polyethylene. After removing samples of the BHC films from the biocompost, their tensile strength decreased by 20%, which shows their biodegradability.Conclusions. The produced biodegradable composite films and the technology used to produce them will be applicable for the packaging industry to reduce environmental impact.


2021 ◽  
Vol 3 (1) ◽  
pp. 144-155
Author(s):  
Moham Ed Abdur Razzaq ◽  
◽  
Sababa Erfan Moma ◽  
Md Sanaul Rabbi ◽  
◽  
...  

Hybrid composites utilize more than one kind of strands within the same matrix to urge the synergistic impact of both fibers' properties on composites' general properties. Hybridization can be performed from artificial, natural, and a combination of both fibers. The constituent filaments can be altered in numerous ways, driving to the variety in composite properties. Partial substitution of glass fiber with natural ones offers an advantage compared with glass fiber composites while permitting to obtain a mechanical performance higher than using pure natural fiber composites. Recently, researchers are tending towards the development of hybrid composites which will provide good static properties. In this context, a concise review has been done on the recent developments of natural/glass fiber-reinforced composites made by hand lay-up method. It includes a survey of the past research already available involving the hybrid composites and the effect of various parameters on composites' performance studied by various researchers.


BioResources ◽  
2018 ◽  
Vol 13 (3) ◽  
pp. 6238-6249
Author(s):  
A. M. Radzi ◽  
S. M. Sapuan ◽  
M. Jawaid ◽  
M. R. Mansor

The effect of sugar palm fiber (SPF) loading was studied relative to the mechanical properties of roselle (RF)/SPF/thermoplastic polyurethane (TPU) hybrid composites. RF/SPF/TPU hybrid composites were fabricated at different weight ratios (100:0, 75:25, 50:50, 25:75, and 0:100) by melt mixing and hot compression. The mechanical (tensile, flexural, and impact test) and morphological properties of tensile fractured samples were examined using a universal testing machine, impact machine, and scanning electron microscope. It was found that the hybridization of RF/SPF increased its impact strength corresponding to the increases in the SPF content of the composites. The tensile and flexural properties of the hybrid composites decreased due to poor interfacial bonding between the fiber and matrix. Scanning electron micrographs of the tensile fractured surface of the RF/SPF hybrid composites revealed fiber pullouts and poor adhesion bonding. In conclusion, the hybridization of SPF with RF/TPU composites enhanced its impact strength while decreasing the tensile and flexural strength.


2021 ◽  
Author(s):  
Ahmed Sarwar

Natural fibers are replacing traditional materials in many industrial applications, though, their use is limited due to their high moisture uptake and complex structure. This study aims at characterizing and analyzing the mechanical and damage response of a hybrid Woven Kevlar/Flax/Epoxy composites in a sandwich structure consisting of a 12 ply Flax core and 2-layer Kevlar skin. Three ply orientations for the flax core([0],[0/90],[§45]), were manufactured. To evaluate the mechanical properties of the hybrid composites, tensile, compressive, flexural and torsional loading tests were performed. Fractured regions were analyzed using optical microscopy to evaluate fracture mechanics. Test specimens were subjected to load unload sequences at progressively increasing loads until failure to evaluate damage response. SEM analysis was performed to characterize dominant damage mechanisms. Reported data shows that hybridization offers significant improvements in mechanical performance and noticeable reductions in damage accumulation, thus, can be further implemented into the industry for general engineering applications.


Sign in / Sign up

Export Citation Format

Share Document