scholarly journals Contact lenses can cause the reverse Pulfrich effect and anti-Pulfrich monovision corrections can eliminate it

2020 ◽  
Author(s):  
Victor Rodriguez-Lopez ◽  
Carlos Dorronsoro ◽  
Johannes Burge
Keyword(s):  
Moving Objects ◽  
Contact Lenses ◽  
Three Dimensional ◽  
Effect Sizes ◽  
Wide Range ◽  
Reported Effect ◽  
Pulfrich Effect ◽  
Image Blur ◽  
Optical Blur ◽  
Large Magnification

AbstractInterocular differences in image blur can cause dramatic misperceptions of the distance and three-dimensional direction of moving objects. This new illusion—the reverse Pulfrich effect—is caused by the optical conditions induced by monovision, a common correction for presbyopia. Fortunately, anti-Pulfrich monovision corrections, in which the blurring lens is slightly darkened, can eliminate the illusion for a wide range of viewing conditions. However, the reverse Pulfrich effect and the efficacy of anti-Pulfrich corrections have previously been demonstrated only with trial lenses. This situation should be addressed, for both clinical and scientific reasons. First, monovision is most commonly prescribed with contact lenses. It is important to replicate these effects in the most common monovision delivery system. Second, trial lenses of different powers, unlike contacts, cause large magnification differences between the eyes. To confidently attribute the reverse Pulfrich effect to differences in optical blur between the eyes, and to ensure that the reported effect sizes are reliable, one must control for magnification. Here, in a within observer study with five separate experiments, we demonstrate i) that contact lenses induce reverse Pulfrich effects that are indistinguishable from those induced by trial lenses, ii) that overall magnification differences do not cause or impact the Pulfrich effect, and iii) that anti-Pulfrich corrections (i.e. darkening the blurring lens) are equally effective when induced by contact lenses and by trial lenses.

scholarly journals Contact lenses, the reverse Pulfrich effect, and anti-Pulfrich monovision corrections

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Victor Rodriguez-Lopez ◽  
Carlos Dorronsoro ◽  
Johannes Burge
Keyword(s):  
Processing Speed ◽  
Moving Objects ◽  
Contact Lenses ◽  
Three Dimensional ◽  
Effect Sizes ◽  
Reported Effect ◽  
Pulfrich Effect ◽  
Image Blur ◽  
Optical Blur ◽  
Large Magnification

Abstract Interocular differences in image blur can cause processing speed differences that lead to dramatic misperceptions of the distance and three-dimensional direction of moving objects. This recently discovered illusion—the reverse Pulfrich effect—is caused by optical conditions induced by monovision, a common correction for presbyopia. Fortunately, anti-Pulfrich monovision corrections, which darken the blurring lens, can eliminate the illusion for many viewing conditions. However, the reverse Pulfrich effect and the efficacy of anti-Pulfrich corrections have been demonstrated only with trial lenses. This situation should be addressed, for clinical and scientific reasons. First, it is important to replicate these effects with contact lenses, the most common method for delivering monovision. Second, trial lenses of different powers, unlike contacts, can cause large magnification differences between the eyes. To confidently attribute the reverse Pulfrich effect to interocular optical blur differences, and to ensure that previously reported effect sizes are reliable, one must control for magnification. Here, in a within-observer study with five separate experiments, we demonstrate that (1) contact lenses and trial lenses induce indistinguishable reverse Pulfrich effects, (2) anti-Pulfrich corrections are equally effective when induced by contact and trial lenses, and (3) magnification differences do not cause or impact the Pulfrich effect.

Speed and Eccentricity Tuning Reveal a Central Role for the Velocity-Based Cue to 3D Visual Motion

2010 ◽  
Vol 104 (5) ◽  
pp. 2886-2899 ◽  
Author(s):  
Thaddeus B. Czuba ◽  
Bas Rokers ◽  
Alexander C. Huk ◽  
Lawrence K. Cormack
Keyword(s):  
Visual Perception ◽  
Moving Objects ◽  
Visual Motion ◽  
Three Dimensional ◽  
Building Blocks ◽  
3D Motion ◽  
Direction Discrimination ◽  
Retinal Motion ◽  
Wide Range ◽  
Over Time

Two binocular cues are thought to underlie the visual perception of three-dimensional (3D) motion: a disparity-based cue, which relies on changes in disparity over time, and a velocity-based cue, which relies on interocular velocity differences. The respective building blocks of these cues, instantaneous disparity and retinal motion, exhibit very distinct spatial and temporal signatures. Although these two cues are synchronous in naturally moving objects, disparity-based and velocity-based mechanisms can be dissociated experimentally. We therefore investigated how the relative contributions of these two cues change across a range of viewing conditions. We measured direction-discrimination sensitivity for motion though depth across a wide range of eccentricities and speeds for disparity-based stimuli, velocity-based stimuli, and “full cue” stimuli containing both changing disparities and interocular velocity differences. Surprisingly, the pattern of sensitivity for velocity-based stimuli was nearly identical to that for full cue stimuli across the entire extent of the measured spatiotemporal surface and both were clearly distinct from those for the disparity-based stimuli. These results suggest that for direction discrimination outside the fovea, 3D motion perception primarily relies on the velocity-based cue with little, if any, contribution from the disparity-based cue.

The Effects of Technology Supports on Community Grocery Shopping Skills for Students With Intellectual and Developmental Disabilities: A Meta-Analysis

2021 ◽  
pp. 016264342198997
Author(s):  
Sojung Jung ◽  
Ciara Ousley ◽  
David McNaughton ◽  
Pamela Wolfe
Keyword(s):  
Developmental Disabilities ◽  
Positive Impact ◽  
Single Case ◽  
Effect Sizes ◽  
Future Research ◽  
Intellectual And Developmental Disabilities ◽  
Positive Effects ◽  
Analytic Review ◽  
Wide Range ◽  
The Impact

In this meta-analytic review, we investigated the effects of technology supports on the acquisition of shopping skills for students with intellectual and developmental disabilities (IDD) between the ages of 5 and 24. Nineteen single-case experimental research studies, presented in 15 research articles, met the current study’s inclusion criteria and the What Works Clearinghouse (WWC) standards. An analysis of potential moderators was conducted, and we calculated effect sizes using Tau-U to examine the impact of age, diagnosis, and type of technology on the reported outcomes for the 56 participants. The results from the included studies provide evidence that a wide range of technology interventions had a positive impact on shopping performance. These positive effects were seen for individuals across a wide range of ages and disability types, and for a wide variety of shopping skills. The strongest effect sizes were observed for technologies that provided visual supports rather than just auditory support. We provide an interpretation of the findings, implications of the results, and recommended areas for future research.

Turbulent three-dimensional dielectric electrohydrodynamic convection between two plates

2012 ◽  
Vol 696 ◽  
pp. 228-262 ◽  
Author(s):  
A. Kourmatzis ◽  
J. S. Shrimpton
Keyword(s):  
Spatial Data ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Energy Budgets ◽  
Turbulent Regime ◽  
Scalar Flux ◽  
Wide Range ◽  
Scalar Variance

AbstractThe fundamental mechanisms responsible for the creation of electrohydrodynamically driven roll structures in free electroconvection between two plates are analysed with reference to traditional Rayleigh–Bénard convection (RBC). Previously available knowledge limited to two dimensions is extended to three-dimensions, and a wide range of electric Reynolds numbers is analysed, extending into a fully inherently three-dimensional turbulent regime. Results reveal that structures appearing in three-dimensional electrohydrodynamics (EHD) are similar to those observed for RBC, and while two-dimensional EHD results bear some similarities with the three-dimensional results there are distinct differences. Analysis of two-point correlations and integral length scales show that full three-dimensional electroconvection is more chaotic than in two dimensions and this is also noted by qualitatively observing the roll structures that arise for both low (${\mathit{Re}}_{E} = 1$) and high electric Reynolds numbers (up to ${\mathit{Re}}_{E} = 120$). Furthermore, calculations of mean profiles and second-order moments along with energy budgets and spectra have examined the validity of neglecting the fluctuating electric field ${ E}_{i}^{\ensuremath{\prime} } $ in the Reynolds-averaged EHD equations and provide insight into the generation and transport mechanisms of turbulent EHD. Spectral and spatial data clearly indicate how fluctuating energy is transferred from electrical to hydrodynamic forms, on moving through the domain away from the charging electrode. It is shown that ${ E}_{i}^{\ensuremath{\prime} } $ is not negligible close to the walls and terms acting as sources and sinks in the turbulent kinetic energy, turbulent scalar flux and turbulent scalar variance equations are examined. Profiles of hydrodynamic terms in the budgets resemble those in the literature for RBC; however there are terms specific to EHD that are significant, indicating that the transfer of energy in EHD is also attributed to further electrodynamic terms and a strong coupling exists between the charge flux and variance, due to the ionic drift term.

scholarly journals Application of Dendrimers for Treating Parasitic Diseases

Pharmaceutics ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 343
Author(s):  
Veronica Folliero ◽  
Carla Zannella ◽  
Annalisa Chianese ◽  
Debora Stelitano ◽  
Annalisa Ambrosino ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Water Solubility ◽  
Parasitic Infection ◽  
Three Dimensional ◽  
Medical Knowledge ◽  
High Ratio ◽  
Molecular Volume ◽  
Parasitic Infections ◽  
Parasitic Diseases ◽  
Wide Range

Despite advances in medical knowledge, parasitic diseases remain a significant global health burden and their pharmacological treatment is often hampered by drug toxicity. Therefore, drug delivery systems may provide useful advantages when used in combination with conventional therapeutic compounds. Dendrimers are three-dimensional polymeric structures, characterized by a central core, branches and terminal functional groups. These nanostructures are known for their defined structure, great water solubility, biocompatibility and high encapsulation ability against a wide range of molecules. Furthermore, the high ratio between terminal groups and molecular volume render them a hopeful vector for drug delivery. These nanostructures offer several advantages compared to conventional drugs for the treatment of parasitic infection. Dendrimers deliver drugs to target sites with reduced dosage, solving side effects that occur with accepted marketed drugs. In recent years, extensive progress has been made towards the use of dendrimers for therapeutic, prophylactic and diagnostic purposes for the management of parasitic infections. The present review highlights the potential of several dendrimers in the management of parasitic diseases.

scholarly journals An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2950
Author(s):  
Hongwei Song ◽  
Xinle Li
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Three Dimensional ◽  
Cementitious Materials ◽  
Research Area ◽  
Cementitious Composites ◽  
Split Tensile Strength ◽  
Contour Crafting ◽  
Wide Range ◽  
Active Research

The most active research area is nanotechnology in cementitious composites, which has a wide range of applications and has achieved popularity over the last three decades. Nanoparticles (NPs) have emerged as possible materials to be used in the field of civil engineering. Previous research has concentrated on evaluating the effect of different NPs in cementitious materials to alter material characteristics. In order to provide a broad understanding of how nanomaterials (NMs) can be used, this paper critically evaluates previous research on the influence of rheology, mechanical properties, durability, 3D printing, and microstructural performance on cementitious materials. The flow properties of fresh cementitious composites can be measured using rheology and slump. Mechanical properties such as compressive, flexural, and split tensile strength reveal hardened properties. The necessary tests for determining a NM’s durability in concrete are shrinkage, pore structure and porosity, and permeability. The advent of modern 3D printing technologies is suitable for structural printing, such as contour crafting and binder jetting. Three-dimensional (3D) printing has opened up new avenues for the building and construction industry to become more digital. Regardless of the material science, a range of problems must be tackled, including developing smart cementitious composites suitable for 3D structural printing. According to the scanning electron microscopy results, the addition of NMs to cementitious materials results in a denser and improved microstructure with more hydration products. This paper provides valuable information and details about the rheology, mechanical properties, durability, 3D printing, and microstructural performance of cementitious materials with NMs and encourages further research.

scholarly journals Polymer cyclization for the emergence of hierarchical nanostructures

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Chaojian Chen ◽  
Manjesh Kumar Singh ◽  
Katrin Wunderlich ◽  
Sean Harvey ◽  
Colette J. Whitfield ◽  
...  
Keyword(s):  
Self Assembly ◽  
Three Dimensional ◽  
Hierarchical Structures ◽  
Structural Similarity ◽  
Vital Role ◽  
Nanomaterial Synthesis ◽  
Wide Range ◽  
Linear Poly ◽  
Polymer Folding ◽  
Dynamics Simulations

AbstractThe creation of synthetic polymer nanoobjects with well-defined hierarchical structures is important for a wide range of applications such as nanomaterial synthesis, catalysis, and therapeutics. Inspired by the programmability and precise three-dimensional architectures of biomolecules, here we demonstrate the strategy of fabricating controlled hierarchical structures through self-assembly of folded synthetic polymers. Linear poly(2-hydroxyethyl methacrylate) of different lengths are folded into cyclic polymers and their self-assembly into hierarchical structures is elucidated by various experimental techniques and molecular dynamics simulations. Based on their structural similarity, macrocyclic brush polymers with amphiphilic block side chains are synthesized, which can self-assemble into wormlike and higher-ordered structures. Our work points out the vital role of polymer folding in macromolecular self-assembly and establishes a versatile approach for constructing biomimetic hierarchical assemblies.

scholarly journals A developmentally descriptive method for quantifying shape in gastropod shells

2020 ◽  
Vol 17 (163) ◽  
pp. 20190721
Author(s):  
J. Larsson ◽  
A. M. Westram ◽  
S. Bengmark ◽  
T. Lundh ◽  
R. K. Butlin
Keyword(s):  
Empirical Studies ◽  
Three Dimensional ◽  
Shell Shape ◽  
Large Set ◽  
Littorina Saxatilis ◽  
Shape Variation ◽  
Gastropod Shell ◽  
Geometric Morphometric ◽  
Wide Range ◽  
Descriptive Method

The growth of snail shells can be described by simple mathematical rules. Variation in a few parameters can explain much of the diversity of shell shapes seen in nature. However, empirical studies of gastropod shell shape variation typically use geometric morphometric approaches, which do not capture this growth pattern. We have developed a way to infer a set of developmentally descriptive shape parameters based on three-dimensional logarithmic helicospiral growth and using landmarks from two-dimensional shell images as input. We demonstrate the utility of this approach, and compare it to the geometric morphometric approach, using a large set of Littorina saxatilis shells in which locally adapted populations differ in shape. Our method can be modified easily to make it applicable to a wide range of shell forms, which would allow for investigations of the similarities and differences between and within many different species of gastropods.

scholarly journals A Review on Biosensors and Recent Development of Nanostructured Materials-Enabled Biosensors

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1109
Author(s):  
Varnakavi. Naresh ◽  
Nohyun Lee
Keyword(s):  
High Surface ◽  
Three Dimensional ◽  
Biological Response ◽  
Volume Ratio ◽  
Recent Decade ◽  
Disease Diagnosis ◽  
Electrical Signal ◽  
Detection Sensitivity ◽  
Wide Range ◽  
Color Tunability

A biosensor is an integrated receptor-transducer device, which can convert a biological response into an electrical signal. The design and development of biosensors have taken a center stage for researchers or scientists in the recent decade owing to the wide range of biosensor applications, such as health care and disease diagnosis, environmental monitoring, water and food quality monitoring, and drug delivery. The main challenges involved in the biosensor progress are (i) the efficient capturing of biorecognition signals and the transformation of these signals into electrochemical, electrical, optical, gravimetric, or acoustic signals (transduction process), (ii) enhancing transducer performance i.e., increasing sensitivity, shorter response time, reproducibility, and low detection limits even to detect individual molecules, and (iii) miniaturization of the biosensing devices using micro-and nano-fabrication technologies. Those challenges can be met through the integration of sensing technology with nanomaterials, which range from zero- to three-dimensional, possessing a high surface-to-volume ratio, good conductivities, shock-bearing abilities, and color tunability. Nanomaterials (NMs) employed in the fabrication and nanobiosensors include nanoparticles (NPs) (high stability and high carrier capacity), nanowires (NWs) and nanorods (NRs) (capable of high detection sensitivity), carbon nanotubes (CNTs) (large surface area, high electrical and thermal conductivity), and quantum dots (QDs) (color tunability). Furthermore, these nanomaterials can themselves act as transduction elements. This review summarizes the evolution of biosensors, the types of biosensors based on their receptors, transducers, and modern approaches employed in biosensors using nanomaterials such as NPs (e.g., noble metal NPs and metal oxide NPs), NWs, NRs, CNTs, QDs, and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.

scholarly journals Pulsed Electromagnetic Cross-Well Exploration for Monitoring Permafrost and Examining the Processes of Its Geocryological Changes

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 60
Author(s):  
Viacheslav Glinskikh ◽  
Oleg Nechaev ◽  
Igor Mikhaylov ◽  
Kirill Danilovskiy ◽  
Vladimir Olenchenko
Keyword(s):  
High Performance ◽  
Geophysical Methods ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Data Interpretation ◽  
Industrial Facilities ◽  
Wide Range ◽  
Vector Finite Element ◽  
A New Technique ◽  
Pulsed Electromagnetic

This paper is dedicated to the topical problem of examining permafrost’s state and the processes of its geocryological changes by means of geophysical methods. To monitor the cryolithozone, we proposed and scientifically substantiated a new technique of pulsed electromagnetic cross-well sounding. Based on the vector finite-element method, we created a mathematical model of the cross-well sounding process with a pulsed source in a three-dimensional spatially heterogeneous medium. A high-performance parallel computing algorithm was developed and verified. Through realistic geoelectric models of permafrost with a talik under a highway, constructed following the results of electrotomography field data interpretation, we numerically simulated the pulsed sounding on the computing resources of the Siberian Supercomputer Center of SB RAS. The simulation results suggest the proposed system of pulsed electromagnetic cross-well monitoring to be characterized by a high sensitivity to the presence and dimensions of the talik. The devised approach can be oriented to addressing a wide range of issues related to monitoring permafrost rocks under civil and industrial facilities, buildings, and constructions.

Sign in / Sign up

Export Citation Format

Share Document