A programmable current mirror for analog trimming using single poly floating-gate devices in standard CMOS technology

2001 ◽  
Vol 48 (1) ◽  
pp. 100-102 ◽  
Author(s):  
S.A. Jackson ◽  
J.C. Killens ◽  
B.J. Blalock
Keyword(s):  
Cmos Technology ◽  
Floating Gate ◽  
Current Mirror

A Research Perspective on CMOS Current Mirror Circuits: Configurations and Techniques

2021 ◽  
Vol 14 ◽  
Author(s):  
Selvakumar Rajendran ◽  
Arvind Chakrapani ◽  
Srihari Kannan ◽  
Abdul Quaiyum Ansari
Keyword(s):  
Building Blocks ◽  
Cmos Technology ◽  
Data Converters ◽  
Floating Gate ◽  
Oxide Semiconductor ◽  
Current Mirror ◽  
Mixed Signal ◽  
Advantages And Disadvantages ◽  
Current Mirrors ◽  
Mixed Signal Circuits

Background: Immense growth in the field of VLSI technology is fuelled by its feasibility to realize analog circuits in µm and nm technology. Current mirror (CM) is a basic building block used to enhance performance characteristics by constructing the complex analog/mixed-signal circuits like amplifier, data converters and voltage level converters. In addition, the current mirror finds diverse of applications from biasing to current-mode signal processing. Methods: In this paper, the Complementary Metal Oxide Semiconductor (CMOS) technology based current mirror (CM) circuits are discussed with their advantages and disadvantages accompanied by the performance analysis of different parameters. It also briefs on the various techniques which are employed for improvising the current mirror performance like gain boosting and bandwidth extension. Besides, this paper lists the CMs that use different types of MOS devices like Floating Gate MOS, Bulk-driven MOS, and Quasi-Floating Gate MOS. As a result, the paper performs a detailed review on CMOS Current mirrors and its techniques. Results: Basic CM circuits that can act as building blocks in the VLSI circuits are simulated using 0.25 μm, BSIM and Level 1 technology. In addition, various devices based CMs are investigated and compared. Conclusion: The comprehensive discussion shows that the current mirror plays a significant role in analog/mixed-signal circuits design to realize complex systems for low-power biomedical and wireless applications.

scholarly journals A Bulk-Driven Quasi-Floating Gate Regulated Cascode Current Mirror and Its Application in Squarer Circuit

2022 ◽  
Author(s):  
bchir bchir ◽  
Mounira Bchir ◽  
Imen Aloui ◽  
Nejib Hassen
Keyword(s):  
Performance Improvement ◽  
Supply Voltage ◽  
Harmonic Distortion ◽  
Cmos Technology ◽  
Floating Gate ◽  
Input Current ◽  
Current Mirror ◽  
Transfer Error ◽  
Simulation Results ◽  
Cascode Current Mirror

Abstract A regulated cascode current mirror (RGC) and its improved version with bulk driven quasi floating gate technique (BD-QFG) are presented in this paper. The proposed BD-QFG RGC current mirror (CM) is compared with the conventional (GD) RGC CM to show the performance improvement. The conventional and unconventional CM are implemented in Candace Virtuoso using 90 nm CMOS technology. For input current (Iin) varied from 0 to 200 μA and for 0.8 V supply voltage, the simulation results present that the proposed BD-QFG RGC CM has less variation in current transfer error (0.2%) as compared to the GD RGC CM (12%). The output voltage requirement for 200 µA input current is respectively 0.7 V and 0.17 V for the GD RGC CM and the BD-QFG RGC CM. The power consumption of the proposed circuit is 22.71 μW which is 0.15 μW higher than the GD RGC (22.56 μW). The total harmonic distortion (THD) of the proposed circuit is 0.4% which is 1.1% less than the conventional circuit (1.5%). All these improvements in the proposed BD-QFG RGC CM are attained at a cost of 0.05 GHz reduction in frequency (2.31 GHz). The minimum supply voltage of BD-QFG RGC CM and GD RGC CM is 0.4 V and

CMOS-MEMS Based Current Mirror MOSFET Embedded Pressure Sensor for Healthcare and Biomedical Applications

2013 ◽  
Vol 647 ◽  
pp. 315-320 ◽  
Author(s):  
Pradeep Kumar Rathore ◽  
Brishbhan Singh Panwar
Keyword(s):  
Pressure Sensor ◽  
Biomedical Applications ◽  
Circuit Simulation ◽  
Applied Pressure ◽  
Pressure Sensors ◽  
Cmos Technology ◽  
Current Mirror ◽  
Sensing Element ◽  
Pressure Sensing ◽  
Cmos Mems

This paper reports on the design and optimization of current mirror MOSFET embedded pressure sensor. A current mirror circuit with an output current of 1 mA integrated with a pressure sensing n-channel MOSFET has been designed using standard 5 µm CMOS technology. The channel region of the pressure sensing MOSFET forms the flexible diaphragm as well as the strain sensing element. The piezoresistive effect in MOSFET has been exploited for the calculation of strain induced carrier mobility variation. The output transistor of the current mirror forms the active pressure sensing MOSFET which produces a change in its drain current as a result of altered channel mobility under externally applied pressure. COMSOL Multiphysics is utilized for the simulation of pressure sensing structure and Tspice is employed to evaluate the characteristics of the current mirror pressure sensing circuit. Simulation results show that the pressure sensor has a sensitivity of 10.01 mV/MPa. The sensing structure has been optimized through simulation for enhancing the sensor sensitivity to 276.65 mV/MPa. These CMOS-MEMS based pressure sensors integrated with signal processing circuitry on the same chip can be used for healthcare and biomedical applications.

Fully Differential Class-AB OTA with Improved CMRR

2017 ◽  
Vol 26 (11) ◽  
pp. 1750169 ◽  
Author(s):  
Francesco Centurelli ◽  
Pietro Monsurrò ◽  
Gaetano Parisi ◽  
Pasquale Tommasino ◽  
Alessandro Trifiletti
Keyword(s):  
Cmos Technology ◽  
Current Mirror ◽  
Differential Mode ◽  
Common Mode ◽  
Common Mode Rejection Ratio ◽  
Class Ab ◽  
Fully Differential ◽  
Rejection Ratio ◽  
Mode Behavior ◽  
The Common

This paper presents a fully differential class-AB current mirror OTA that improves the common-mode behavior of a topology that presents very good differential-mode performance but poor common-mode rejection ratio (CMRR). The proposed solution requires a low-current auxiliary circuit driven by the input signal, to compensate the effect of the common-mode input component. Simulations in 40-nm CMOS technology show a net reduction of common-mode gain of more than 90[Formula: see text]dB without affecting the differential-mode behavior; a sample-and-hold amplifier exploiting the proposed amplifier has also been simulated.

Low Power FGSRAM Cell Using Sleepy and LECTOR Technique

2016 ◽  
Vol 4 (2) ◽  
pp. 333 ◽  
Author(s):  
Kanan Bala Ray ◽  
Sushanta Kumar Mandal ◽  
Shivalal Patro
Keyword(s):  
Low Power ◽  
Power Supply ◽  
High Stability ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Floating Gate ◽  
Power Supply Voltage ◽  
Operation Analysis ◽  
Sram Cell ◽  
Simulation Results

<em>In this paper floating gate MOS (FGMOS) along with sleep transistor technique and leakage control transistor (LECTOR) technique has been used to design low power SRAM cell. Detailed investigation on operation, analysis and result comparison of conventional 6T, FGSRAM, FGSLEEPY, FGLECTOR and FGSLEEPY LECTOR has been done. All the simulations are done in Cadence Virtuoso environment on 45 nm standard CMOS technology with 1 V power supply voltage. Simulation results show that FGSLEEPY LECTOR SRAM cell consumes very low power and achieves high stability compared to conventional FGSRAM Cell</em>

New Schmitt Trigger with Controllable Hysteresis using Dual Control Gate-Floating Gate Transistor (DCG-FGT)

2013 ◽  
Vol 2 (1) ◽  
pp. 49
Author(s):  
Abderrezak Marzaki ◽  
V. Bidal ◽  
R. Laffont ◽  
W. Rahajandraibe ◽  
J-M. Portal ◽  
...  
Keyword(s):  
Low Voltage ◽  
Schmitt Trigger ◽  
Cmos Technology ◽  
Floating Gate ◽  
Dual Control ◽  
Switching Voltage ◽  
Voltage Range ◽  
Rail To Rail ◽  
Floating Gate Transistor ◽  
Simulation Results

This paper presents different low voltage adjustable CMOS Schmitt trigger using DCG-FGT transistor. Simple circuits are introduced to provide flexibility to program the hysteresic threshold in this paper. The hysteresis can be controlled accurately at a large voltage range. The proposed Schmitt trigger have been designed using 90nm 1.2V CMOS technology and simulated using Eldo with PSP device models. The simulation results show rail-to-rail operation and adjustable switching voltages <em>V<sub>TH- </sub></em>(low switching voltage) and <em>V<sub>TH+ </sub></em>(high switching voltage).

Tunable CMOS Active Inductor Using Widlar Current Source

2018 ◽  
Vol 28 (02) ◽  
pp. 1950027 ◽  
Author(s):  
Dhara P Patel ◽  
Shruti Oza-Rahurkar
Keyword(s):  
Quality Factor ◽  
Supply Voltage ◽  
Noise Analysis ◽  
Current Source ◽  
Cmos Technology ◽  
The Other ◽  
Active Inductor ◽  
Voltage Sensitivity ◽  
Current Mirror ◽  
Characterization Factors

A novel tuning principle for simple gyrator-based CMOS active inductor (AI) circuit is presented. The method makes use of Widlar current source to enhance the quality factor. The simulation of the proposed AI provides a maximum quality factor of 1819 at 2.88[Formula: see text]GHz. The AI shows the inductive bandwidth of 1.66[Formula: see text]GHz to 3.16[Formula: see text]GHz and power consumption of 6.87[Formula: see text]mW. The other characterization factors such as linearity, supply voltage sensitivity and noise analysis are discussed. The performance of the tunable AI using Widlar current source are compared with the same using a simple current mirror. An AI using a conventional current mirror (CCM) and Widlar current source have been implemented in the 0.18[Formula: see text][Formula: see text]m CMOS technology.

Sign in / Sign up

Export Citation Format

Share Document