Aspen Plus Based Study on the Oxygen Consumption of Alternative Fuels in the Cement Calciner Combustion Process

2010 ◽  
Author(s):  
Shen-xue Cao ◽  
Yun Zhang ◽  
Yu Chen ◽  
Su-ling Liu ◽  
Shu-shen Zhang
Keyword(s):  
Oxygen Consumption ◽  
Alternative Fuels ◽  
Combustion Process ◽  
Aspen Plus

scholarly journals Comparison of Diesel Engine Vibroacoustic Properties Powered by Bio and Standard Fuel

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1478
Author(s):  
Radoslaw Wrobel ◽  
Gustaw Sierzputowski ◽  
Zbigniew Sroka ◽  
Radostin Dimitrov
Keyword(s):  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Significant Other ◽  
Engine Torque ◽  
Engine Model ◽  
Vehicle Operation ◽  
History Of ◽  
Profile Changes ◽  
The Time Domain

Alternative fuels appeared soon after the first internal combustion engines were designed. The history of alternative fuels is basically as long as the history of the automotive industry. Initially, fuels whose physicochemical properties allowed for a change in parameters of the combustion process in order to achieve greater efficiency and reliability were searched for. Nowadays, there are significantly more variables; in addition to the above mentioned parameters, alternative fuels are being sought that will ensure environmental protection during vehicle operation and improve the ergonomics of use. This article outlines the results of the authors’ own comparative tests of vibrations of a vibroacoustic character. Based on a popular engine model, the vibration–acoustic responses of a system powered by two types of fuel, namely, diesel and biodiesel (B10), are compared. The research consists of comparing vibrations in both time and frequency domains. In the case of the time domain, the evaluation was performed with vibrations as a function of engine torque and speed. In the case of frequency analysis, the focus was on changes in the frequency response for the tested fuels. The research shows that the profile of vibroacoustic vibrations changes in the case of biodiesel power supply in relation to standard fuel. The vibration profile changes significantly as a function of speed and only slightly in relation to the engine load. The results presented in this article show different vibroacoustic responses of an engine powered by diesel and biodiesel; the change is minor for lower speeds but significant (other harmonics are dominant) for higher speeds (changes in the dominant harmonic magnitude of up to 10% at a crankshaft speed of 3000 rpm).

Effects of Natural Gas Compositions on Engine In-Cylinder Process

2015 ◽  
Vol 1092-1093 ◽  
pp. 498-503
Author(s):  
La Xiang ◽  
Yu Ding
Keyword(s):  
Natural Gas ◽  
Alternative Fuels ◽  
Combustion Process ◽  
Engine Performance ◽  
Maximum Temperature ◽  
Maximum Pressure ◽  
Test Bed ◽  
Promising Alternative ◽  
Natural Gas Engines ◽  
Lower Maximum

Natural gas (NG) is one of the most promising alternative fuels of diesel and petrol because of its economics and environmental protection. Generally the NG engine share the similar structure profile with diesel or petrol engine but the combustion characteristics of NG is varied from the fuels, so the investigation of NG engine combustion process receive more attentions from the researchers. In this paper, a zero-dimensional model on the basis of Vibe function is built in the MATLAB/SIMULINK environment. The model provides the prediction of combustion process in natural gas engines, which has been verified by the experimental data in the NG test bed. Furthermore, the influence of NG composition on engine performance is investigated, in which the in-cylinder maximum pressure and temperature and mean indicated pressure are compared using different type NG. It is shown in the results that NG with higher composition of methane results in lower maximum temperature and mean indicated pressure as well as higher maximum pressure.

Ethers and esters as alternative fuels for internal combustion engine: A review

2021 ◽  
pp. 146808742110464
Author(s):  
Yang Hua
Keyword(s):  
Alternative Fuels ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Engine Performance ◽  
Internal Combustion ◽  
Operating Conditions ◽  
Future Research ◽  
Particulate Emissions ◽  
Ic Engine

Ether and ester fuels can work in the existing internal combustion (IC) engine with some important advantages. This work comprehensively reviews and summarizes the literatures on ether fuels represented by DME, DEE, DBE, DGM, and DMM, and ester fuels represented by DMC and biodiesel from three aspects of properties, production and engine application, so as to prove their feasibility and prospects as alternative fuels for compression ignition (CI) and spark ignition (SI) engines. These studies cover the effects of ether and ester fuels applied in the form of single fuel, mixed fuel, dual-fuel, and multi-fuel on engine performance, combustion and emission characteristics. The evaluation indexes mainly include torque, power, BTE, BSFC, ignition delay, heat release rate, pressure rise rate, combustion duration, exhaust gas temperature, CO, HC, NOx, PM, and smoke. The results show that ethers and esters have varying degrees of impact on engine performance, combustion and emissions. They can basically improve the thermal efficiency of the engine and reduce particulate emissions, but their effects on power, fuel consumption, combustion process, and CO, HC, and NOx emissions are uncertain, which is due to the coupling of operating conditions, fuel molecular structure, in-cylinder environment and application methods. By changing the injection strategy, adjusting the EGR rate, adopting a new combustion mode, adding improvers or synergizing multiple fuels, adverse effects can be avoided and the benefits of oxygenated fuel can be maximized. Finally, some challenges faced by alternative fuels and future research directions are analyzed.

scholarly journals Implementation of packed column for biogas purification as fuel for motorcycle injection systems for performance improvement

2021 ◽  
Vol 4 (1(112)) ◽  
pp. 86-93
Author(s):  
Syamsuri Syamsuri ◽  
Yustia Wulandari Mirzayanti ◽  
Zain Lillahulhaq ◽  
Achmad Bagus Hidayat
Keyword(s):  
Alternative Fuels ◽  
Packed Column ◽  
Combustion Process ◽  
Primary Energy ◽  
Average Error ◽  
Spark Ignition Engines ◽  
Chassis Dynamometer ◽  
Higher Power ◽  
Biogas Purification ◽  
Liquid Flows

The use of gasoline for primary energy consumption can reduce crude oil, contained in the earth. The development of alternative fuels such as biogas and biofuel is very critical to overcoming this problem. Biogas requires purification to remove some contaminant particles that interfere with the combustion process. The packed column is generally applied to absorb and separate gas and liquid mixture. It is more efficient due to the liquid flows down the column of steam naturally without the supply of energy from outside the system. This study focuses on determining the effect of the packed column biogas purification process. Biogas is applied as an alternative fuel in spark-ignition engines (SIE). The test is carried out using a chassis dynamometer to obtain power and torque data. The use of the packed column for biogas fuel purification can produce higher performance compared to unrefined biogas. The unrefined biogas still contains impurities that can interfere with the combustion process. This condition is proven by measuring the power and torque of the vehicle on the chassis dynamometer, where the filtered biogas produces higher power and torque. Tests were carried out both using the packed column and without the packed column. Variations from speed to torque, to power, to SFC and BMEP are considered. In this study, validation is in good agreement with previous studies. Overall, the results show that the average error between using the packed column and without the packed column for torque, power, SFC and BMEP is increased by approximately 7 %. Purification of biogas using the packed column using Ca(OH)2 can bind CO2 and obtain pure methane gas with a higher heating value. In conclusion, the packed column for biogas purification as fuel for motorcycle injection systems can be applied

scholarly journals Some aspects of cycle variability at the Diesel engine fuelled with animal fats

2019 ◽  
Vol 112 ◽  
pp. 01014
Author(s):  
Adrian Nicolici ◽  
Constantin Pană ◽  
Niculae Negurescu ◽  
Alexandru Cernat ◽  
Cristian Nuţu
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Alternative Fuels ◽  
Combustion Process ◽  
Pollutant Emissions ◽  
Experimental Investigations ◽  
Maximum Pressure ◽  
Content Increase ◽  
Animal Fats ◽  
Viable Solution

The progressive diminution of the oil reserves all over the world highlights the necessity of using alternative fuels derived from durable renewable resource. The use of the alternative fuels represents a viable solution to reduce the pollutant emissions and to replace fossil fuels. Thus, a viable solution is the use of the animal fats in mixture with the diesel fuel at the diesel engines. A D2156 MTN8 diesel engine was firstly fuelled with diesel fuel and then with different blends of diesel fuel-animal fats (5% and 10% animal fats content). In the paper are presented some results of the experimental investigations of engine fuelled with preheated animal fats. The raw animal fats effects on the combustion process and on the pollutant emissions at different engine loads and 1450 rev/min engine speed are showed. The engine cycle variability increases at the animal fats content increase. The cycle variability for maximum pressure, maximum pressure angle and indicated mean effective pressure is analysed. The cycle variability coefficients values don’t exceed the recommended values of the standard diesel engine.

Combustion Characteristics of Isolated Free-Falling Droplets of Jet A Blended With Ethanol and Butanol

2018 ◽  
Author(s):  
Álvaro Muelas ◽  
Pilar Remacha ◽  
Javier Ballester
Keyword(s):  
Gas Turbines ◽  
Alternative Fuels ◽  
Droplet Diameter ◽  
Combustion Process ◽  
Combustion Characteristics ◽  
Shell Size ◽  
Pure Ethanol ◽  
Promising Alternative ◽  
Burning Rates ◽  
Alcohol Mixtures

Recent studies on experimental gas turbines suggest that the addition of ethanol or butanol to Jet A are viable alternatives for reducing CO and NOx emissions while maintaining similar performance to that of pure Jet A. In light of this potential, experimental data regarding the burning characteristics of Jet A/ethanol and Jet A/butanol blends are required in order to better understand their combustion process. Following a previous study on Jet A/butanol droplet combustion, the scope has been extended in order to also include ethanol and a Jet A/ethanol mixture as well as to perform a more detailed characterization. In this work the combustion characteristics of Jet A, butanol, ethanol and their mixtures (20% vol. alcohol in kerosene) are presented for different test conditions. The evaluated combustion characteristics include droplet, flame and soot shell size evolutions, burning rates and image-based soot estimations. The influence of oxygen availability is also ascertained. The evolution of droplet diameter and burning rates for Jet A and its blends with both alcohols are very similar, whereas pure ethanol and butanol display more distinct behaviors. Soot indices are found to be quite different, with a clear reduction in the sooting propensity of the Jet A/alcohol mixtures when compared to neat kerosene. These results support the feasibility of kerosene-alcohol mixtures as promising alternative fuels with similar combustion characteristics, but with much lower sooting propensity than pure kerosene.

One-Dimensional Simulation of the Combustion Process in an Engine Cylinder with Ethanol

2014 ◽  
Vol 660 ◽  
pp. 447-451
Author(s):  
Akasyah M. Kathri ◽  
Rizalman Mamat ◽  
Amir Aziz ◽  
Azri Alias ◽  
Nik Rosli Abdullah
Keyword(s):  
Diesel Engine ◽  
Alternative Fuels ◽  
Engine Speed ◽  
Combustion Process ◽  
Cylinder Pressure ◽  
Ethanol Fuel ◽  
One Dimensional ◽  
Engine Cylinder ◽  
Dimensional Simulation ◽  
The One

The diesel engine is one of the most important engines for road vehicles. The engine nowadays operates with different kinds of alternative fuels, such as natural gas and biofuel. The aim of this article is to study the combustion process that occurs in an engine cylinder of a diesel engine when using biofuel. The one-dimensional numerical analysis using GT-Power software is used to simulate the commercial four-cylinder diesel engine. The engine operated at high engine load and speed. The ethanol fuel used in the simulation is derived from the conventional ethanol fuel properties. The analysis of simulations includes the cylinder pressure, combustion temperature and rate of heat release. The simulation results show that in-cylinder pressure and temperature for ethanol is higher than for diesel at any engine speed. However, the mass fraction of ethanol burned is similar to that of diesel. MFB only affects the engine speed.

Study of Operation of a Pilot CFB-Reactor in Dynamic Conditions

2003 ◽  
Author(s):  
Antti S. Tourunen ◽  
Jaakko J. Saastamoinen ◽  
Jouni P. Ha¨ma¨la¨inen ◽  
Kari M. Paakkinen ◽  
Timo E. Hyppa¨nen ◽  
...  
Keyword(s):  
Oxygen Concentration ◽  
Alternative Fuels ◽  
Combustion Process ◽  
Response Analysis ◽  
Process Conditions ◽  
Stable Operation ◽  
Fuel Quality ◽  
Feed System ◽  
Dynamic Conditions ◽  
Fuel Feed

The development of a high efficiency CFB power plant (once-through supercritical CFB technology) and the use of alternative fuels require advanced methods of control and knowledge of the dynamic behavior of the furnace. Dynamic response analysis is needed for design of control algorithms in load changes. The operation of a pilot CFB-reactor in dynamic conditions and in load changes is analyzed experimentally and by modeling at different process conditions. Reactivity parameters for different fuels can be extracted from simple dynamic measurements and then used in computations studying operation in load changes. Dynamic studies are also required to see the necessary requirements for the fuel quality and fuel feed system to maintain stable operation. For high volatile coals the fuel feeding must be steadier to keep the variation in the outlet oxygen concentration at some range than with coals with low reactivity or alternatively greater air coefficient is needed to prevent too low O2 concentrations, which can cause an increase in CO emissions. The fuel quality can be characterized by the fluctuation of oxygen concentration in flue gases in steady operation conditions, which depends on the fluctuations in the combustion and in the fuel feed and on operational conditions. The amplitude of the fluctuations was studied. For advanced controls, it is necessary to know the factors affecting the process dynamics, such as reactivity and the behavior of char inventory in bed. This information is also necessary in developing and optimizing the CFB boiler considering emissions, combustion process and furnace scale up.

Experimental Investigation of Low Emission Liquid Fuelled Reverse Cross Flow Combustor

2017 ◽  
Author(s):  
Preetam Sharma ◽  
Vaibhav Arghode
Keyword(s):  
Experimental Investigation ◽  
Reaction Zone ◽  
Liquid Fuel ◽  
Alternative Fuels ◽  
Reverse Flow ◽  
Hot Spot ◽  
Combustion Process ◽  
Cross Flow ◽  
Air Jet ◽  
Low Emission

This study deals with an experimental investigation of a low emission liquid fuelled (ethanol) reverse cross-flow combustor. This investigation is carried out to cater to the need of burning liquid fuels (including alternative fuels) with minimum emissions in gas turbine engines used for both aircraft and land based power generation applications using modern combustion technologies. In the present combustor design, the air inlet and the exhaust ports are located on the same side (and hence the name reverse-flow) whereas the liquid fuel is injected directly into the strong cross-flow of the air using a small diameter round tube to aid fuel atomization. Hence, a conventional atomization system is absent in the investigated combustor. The reverse-flow configuration allows effective internal product gas recirculation to facilitate the preheating and dilution of the oxidizer stream and stabilization of a distributed reaction zone. This apparently suppresses near stoichiometric reactions and hot spot regions resulting in low pollutant (NOx and CO) emissions. In the present case, the heat load is varied (keeping a constant air flow rate) from 3.125 kW to 6.25 kW which results in the thermal intensity variation from 19 MW/m3-atm to 39 MW/m3-atm. Two different tubes with internal diameters (dfuel) of 0.5 mm and 0.8 mm are used for injection of liquid fuel into the cross flow of air. The combustor was also tested in premixed-prevaporized (PP) mode with ethanol for benchmarking. The combustion process was found to be stable with NOx emissions of 1.6 ppm (premixed-prevaporized), 8 ppm (dfuel = 0.5 mm), 9 ppm (dfuel = 0.8 mm). The CO emissions were 5 ppm (premixed-prevaporized), ∼100 ppm (dfuel = 0.5, 0.8 mm), at atmospheric pressure operation (corrected to 15% O2) and ϕ = 0.7, Tadiabatic ∼1830 K. Reaction zone positioning inside the combustor was investigated using OH* chemiluminescence imaging and global flame pictures, and the same was found to be located in the vicinity of the air jet.

Phenomenological Modeling of Combustion in Pre-Chamber and the Pilot Flame for Natural Gas Engines

2019 ◽  
Author(s):  
Long Liu ◽  
Xia Wen ◽  
Qian Xiong ◽  
Xiuzhen Ma
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Alternative Fuels ◽  
Gas Flow ◽  
Combustion Process ◽  
Clean Energy ◽  
Combustion Model ◽  
Flame Surface ◽  
Flow Process ◽  
Natural Gas Engines

Abstract With energy shortages and increasing environmental problems, natural gas, as a clean energy, has the advantages of cheap price and large reserves and has become one of the main alternative fuels for marine diesel engines. For large bore natural gas engines, pre-chamber spark plug ignition can be used to increase engine efficiency. The engine mainly relies on the flame ejected from the pre-chamber to ignite the mixture of natural gas and air in the main combustion chamber. The ignition flame in the main combustion chamber is the main factor affecting the combustion process. Although the pre-chamber natural gas engines have been extensively studied, the characteristics of combustion in the pre-chamber and the development of ignition flame in the main combustion chamber have not been fully understood. In this study, a two-zone phenomenological combustion model of pre-chamber spark-ignition natural gas engines is established based on the exchange of mass and energy of the gas flow process in the pre-chamber and the main combustion chamber. The basic characteristics of the developed model are: a spherical flame surface is used to describe the combustion state in the pre-chamber, and according to the turbulent jet theory, the influence of turbulence on the state of the pilot flame is considered based on the Reynolds number. According to the phenomenological model, the time when the flame starts to be injected from the pre-chamber to the main combustion chamber, and the parameters such as the length of the pilot flame are analyzed. The model was verified by experimental data, and the results showed that the calculated values were in good agreement with the experimental values. It provides an effective tool for mastering the law of flame development and supporting the optimization of combustion efficiency.

Sign in / Sign up

Export Citation Format

Share Document