Method for Increasing High Speed of Development of Remote Web Application

2020 ◽  
Author(s):  
Aung Kyaw Myo ◽  
Evgeni M. Portnov ◽  
Sergey V. Tsymbalov
Keyword(s):  
Web Application ◽  
High Speed

scholarly journals CLIENT-SERVER WEB-ORIENTED SYSTEM WITH ELEMENTS OF ANALYSIS FOR ORGANIZATION OF THE ELECTION PROCESS WITHIN THE WORK OF ASSETS STUDENT

2020 ◽  
pp. 51-59
Author(s):  
V. M. Levitskiy ◽  
N. Yu. Rohotska
Keyword(s):  
Web Application ◽  
High Speed ◽  
Public Awareness ◽  
Rapid Development ◽  
Data Access ◽  
Internet Technology ◽  
Electronic Voting ◽  
Client Server ◽  
The Will ◽  
Oriented System

With the rapid development of Internet technology, the involvement of computers in almost every aspect of human life, and the increasing use of opportunities to spend their time freely and profitably, society is increasingly moving to address important issues through modern gadgets with Internet access. The government also introduces various forms of e‑activity in its practice, such as: e‑democracy, e‑government, raising public awareness of current policy issues, programs, legislative innovations, creating opportunities for advising citizens and their participation in decision-making via the Internet, is actively involved in the issue of electronic elections. The state has chosen a course for e‑democracy, it becomes a direct tool for democratization and development of society in the information direction, so it is very important to create appropriate conditions for the will of citizens. One of the ways to implement e‑democracy is “electronic voting”, which can be described as the fixation of the will of voters using electronic technology, which includes both the voting process itself and the process of automatic vote counting using electronic devices and special software. any person at a convenient time can make their own will with the help of electronic voting and modern gadgets. The article considers the development of an electronic voting system which is implemented using a client-server web-oriented system with elements of analysis. Web-system is a distributed information system with a unified data access interface based on the use of a number of open standards. The possibilities, ways and advantages of using electronic voting during the election of the heads of student self-government are analyzed, the basic principles on which the electronic electoral system should be built are described. Electronic voting is defined as a procedure for the expression of will using electronic means and as an automated process of counting votes. A program for holding elections of student self-government chairmen based on a multi-layered client-server architecture and with elements of web-application has been created. The stage of developing the architecture of the software system is very important, given that this stage determines the principles of the system, user interfaces, all components of the system and the relationships between them. During the development of this system, the main emphasis was placed on building the architecture of the application and the example of the client part, which demonstrates its capabilities, user-friendly interface and high speed. The use of selected technologies allowed to perform the task in full and create a basis for convenient expansion of functionality

scholarly journals Construction of a Wireless Sensing Network System for Leisure Agriculture for Cloud-Based Agricultural Internet of Things

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Yao Shen
Keyword(s):  
Internet Of Things ◽  
Web Application ◽  
High Speed ◽  
Structure Design ◽  
Sensor Technology ◽  
Urban Residents ◽  
Massive Data ◽  
Network System ◽  
Wireless Sensing ◽  
Port Access

This paper provides an in-depth study and analysis of the construction of a cloud-based agricultural Internet of Things system for a wireless sensing network system for leisure agriculture. Using more mature agricultural sensor technology, compliant economy designed for indoor feeding and planting of distributed and integrated two sensor collection and transmission scheme, analysis of environmental factors selected high-performance various types of sensors and regulation equipment, between nodes based on SI4432 for wireless communication, and controller nodes selected STM32 as a microprocessor, through the W5500-based network port access module or ESP8266-based WiFi module for broadband access. In response to the development of mobile technology and the reality of diversified types of mobile terminals, to make all kinds of terminals accessible to the leisure agriculture system, the server software adopts the SOA software architecture, which makes the system have good openness and scalability. The NoSQL database MongoDB is used for the cloud storage of massive data, and the data structure design is completed after analyzing the database requirements, including collections, documents, and fields. The autosharding technology is used to build a database sharding cluster in the cloud, which realizes the high-speed cloud elastic storage of massive data and rewrites the database access object DAO to ensure that the WEB application is normal. Traditional leisure agriculture is mostly based on field tourism and agritourism methods, and the model is developing slowly and has increasingly failed to attract the interest of urban residents. The introduction of IoT technology in traditional leisure agriculture can increase the interest of leisure agriculture and improve the interest of urban residents in leisure agriculture.

Microfabrication research at the National Submicron Facility

1983 ◽  
Vol 41 ◽  
pp. 86-89
Author(s):  
E.D. Wolf
Keyword(s):  
Integrated Circuits ◽  
Particle Physics ◽  
High Speed ◽  
New Technology ◽  
High Energy ◽  
High Energy Particle ◽  
New Science ◽  
Wide Range ◽  
Intermediate Domain ◽  
Circuit Function

Most microelectronics devices and circuits operate faster, consume less power, execute more functions and cost less per circuit function when the feature-sizes internal to the devices and circuits are made smaller. This is part of the stimulus for the Very High-Speed Integrated Circuits (VHSIC) program. There is also a need for smaller, more sensitive sensors in a wide range of disciplines that includes electrochemistry, neurophysiology and ultra-high pressure solid state research. There is often fundamental new science (and sometimes new technology) to be revealed (and used) when a basic parameter such as size is extended to new dimensions, as is evident at the two extremes of smallness and largeness, high energy particle physics and cosmology, respectively. However, there is also a very important intermediate domain of size that spans from the diameter of a small cluster of atoms up to near one micrometer which may also have just as profound effects on society as “big” physics.

Vacuum System to Minimize the Specimen Contamination of High-Performance EM

1977 ◽  
Vol 35 ◽  
pp. 68-69
Author(s):  
N. Yoshimura ◽  
K. Shirota ◽  
T. Etoh
Keyword(s):  
Electron Microscope ◽  
High Speed ◽  
High Performance ◽  
High Vacuum ◽  
Vacuum System ◽  
Pump System ◽  
Pumping System ◽  
Diffusion Pump ◽  
Almost All ◽  
Cascade Type

One of the most important requirements for a high-performance EM, especially an analytical EM using a fine beam probe, is to prevent specimen contamination by providing a clean high vacuum in the vicinity of the specimen. However, in almost all commercial EMs, the pressure in the vicinity of the specimen under observation is usually more than ten times higher than the pressure measured at the punping line. The EM column inevitably requires the use of greased Viton O-rings for fine movement, and specimens and films need to be exchanged frequently and several attachments may also be exchanged. For these reasons, a high speed pumping system, as well as a clean vacuum system, is now required. A newly developed electron microscope, the JEM-100CX features clean high vacuum in the vicinity of the specimen, realized by the use of a CASCADE type diffusion pump system which has been essentially improved over its predeces- sorD employed on the JEM-100C.

The on-line use of histogram data for high-speed correction and alignment of electron microscope images

1984 ◽  
Vol 42 ◽  
pp. 556-557
Author(s):  
William Krakow
Keyword(s):  
Power Spectrum ◽  
High Speed ◽  
Direct Memory Access ◽  
Digital Television ◽  
Contrast Transfer Function ◽  
The Past ◽  
High Resolution Tem ◽  
On Line ◽  
Correction Of Astigmatism ◽  
The Fourier Transform

In the past few years on-line digital television frame store devices coupled to computers have been employed to attempt to measure the microscope parameters of defocus and astigmatism. The ultimate goal of such tasks is to fully adjust the operating parameters of the microscope and obtain an optimum image for viewing in terms of its information content. The initial approach to this problem, for high resolution TEM imaging, was to obtain the power spectrum from the Fourier transform of an image, find the contrast transfer function oscillation maxima, and subsequently correct the image. This technique requires a fast computer, a direct memory access device and even an array processor to accomplish these tasks on limited size arrays in a few seconds per image. It is not clear that the power spectrum could be used for more than defocus correction since the correction of astigmatism is a formidable problem of pattern recognition.

Structural changes in silicon-on-insulator material during post-implantation annealing

1986 ◽  
Vol 44 ◽  
pp. 736-737
Author(s):  
C. O. Jung ◽  
S. J. Krause ◽  
S.R. Wilson
Keyword(s):  
Integrated Circuits ◽  
Oxide Layer ◽  
High Speed ◽  
Structural Changes ◽  
Device Fabrication ◽  
Silicon On Insulator ◽  
High Quality ◽  
Radiation Hardened ◽  
Post Implantation ◽  
Very High

Silicon-on-insulator (SOI) structures have excellent potential for future use in radiation hardened and high speed integrated circuits. For device fabrication in SOI material a high quality superficial Si layer above a buried oxide layer is required. Recently, Celler et al. reported that post-implantation annealing of oxygen implanted SOI at very high temperatures would eliminate virtually all defects and precipiates in the superficial Si layer. In this work we are reporting on the effect of three different post implantation annealing cycles on the structure of oxygen implanted SOI samples which were implanted under the same conditions.

An atomic-resolution microscope study of Al contracts on GaAs

1986 ◽  
Vol 44 ◽  
pp. 726-727
Author(s):  
Z. Liliental-Weber ◽  
C. Nelson ◽  
R. Ludeke ◽  
R. Gronsky ◽  
J. Washburn
Keyword(s):  
High Speed ◽  
Schottky Contacts ◽  
Detailed Knowledge ◽  
The Past ◽  
Semiconductor Interfaces ◽  
Deposited Metal ◽  
Microwave Applications ◽  
Free Interfaces ◽  
Potential Use

The properties of metal/semiconductor interfaces have received considerable attention over the past few years, and the Al/GaAs system is of special interest because of its potential use in high-speed logic integrated optics, and microwave applications. For such materials a detailed knowledge of the geometric and electronic structure of the interface is fundamental to an understanding of the electrical properties of the contact. It is well known that the properties of Schottky contacts are established within a few atomic layers of the deposited metal. Therefore surface contamination can play a significant role. A method for fabricating contamination-free interfaces is absolutely necessary for reproducible properties, and molecularbeam epitaxy (MBE) offers such advantages for in-situ metal deposition under UHV conditions

Scanning x-ray fluorescence microscopy and principal component analysis

1992 ◽  
Vol 50 (2) ◽  
pp. 1752-1753
Author(s):  
Brian Cross
Keyword(s):  
Principal Component Analysis ◽  
Fluorescence Microscopy ◽  
Spatial Resolution ◽  
High Speed ◽  
Image Acquisition ◽  
Principal Component ◽  
Fluorescence Microscope ◽  
Acquisition Rate ◽  
X Ray ◽  
Speed Up

A relatively new entry, in the field of microscopy, is the Scanning X-Ray Fluorescence Microscope (SXRFM). Using this type of instrument (e.g. Kevex Omicron X-ray Microprobe), one can obtain multiple elemental x-ray images, from the analysis of materials which show heterogeneity. The SXRFM obtains images by collimating an x-ray beam (e.g. 100 μm diameter), and then scanning the sample with a high-speed x-y stage. To speed up the image acquisition, data is acquired "on-the-fly" by slew-scanning the stage along the x-axis, like a TV or SEM scan. To reduce the overhead from "fly-back," the images can be acquired by bi-directional scanning of the x-axis. This results in very little overhead with the re-positioning of the sample stage. The image acquisition rate is dominated by the x-ray acquisition rate. Therefore, the total x-ray image acquisition rate, using the SXRFM, is very comparable to an SEM. Although the x-ray spatial resolution of the SXRFM is worse than an SEM (say 100 vs. 2 μm), there are several other advantages.

Image quality vs data obtainment in biological electron microscopy

1986 ◽  
Vol 44 ◽  
pp. 42-43
Author(s):  
J. E. Johnson
Keyword(s):  
Electron Microscopy ◽  
Endoplasmic Reticulum ◽  
Electron Beam ◽  
Image Quality ◽  
High Speed ◽  
Early Period ◽  
Early Years ◽  
Fluorescent Screen ◽  
Embedding Medium

In the early years of biological electron microscopy, scientists had their hands full attempting to describe the cellular microcosm that was suddenly before them on the fluorescent screen. Mitochondria, Golgi, endoplasmic reticulum, and other myriad organelles were being examined, micrographed, and documented in the literature. A major problem of that early period was the development of methods to cut sections thin enough to study under the electron beam. A microtome designed in 1943 moved the specimen toward a rotary “Cyclone” knife revolving at 12,500 RPM, or 1000 times as fast as an ordinary microtome. It was claimed that no embedding medium was necessary or that soft embedding media could be used. Collecting the sections thus cut sounded a little precarious: “The 0.1 micron sections cut with the high speed knife fly out at a tangent and are dispersed in the air. They may be collected... on... screens held near the knife“.

TEM study of phosphorus-implanted pseudomorphic Si0.88Ge0.12 on Si(100)

1995 ◽  
Vol 53 ◽  
pp. 468-469
Author(s):  
N. David Theodore ◽  
Donald Y.C Lie ◽  
J. H. Song ◽  
Peter Crozier
Keyword(s):  
Integrated Circuits ◽  
Heterojunction Bipolar Transistors ◽  
Integrated Circuit ◽  
High Speed ◽  
Room Temperature ◽  
Strain Relaxation ◽  
Bipolar Transistors ◽  
Sige Hbt ◽  
Integrated Circuit Manufacturing ◽  
Microstructural Behavior

SiGe is being extensively investigated for use in heterojunction bipolar-transistors (HBT) and high-speed integrated circuits. The material offers adjustable bandgaps, improved carrier mobilities over Si homostructures, and compatibility with Si-based integrated-circuit manufacturing. SiGe HBT performance can be improved by increasing the base-doping or by widening the base link-region by ion implantation. A problem that arises however is that implantation can enhance strain-relaxation of SiGe/Si.Furthermore, once misfit or threading dislocations result, the defects can give rise to recombination-generation in depletion regions of semiconductor devices. It is of relevance therefore to study the damage and anneal behavior of implanted SiGe layers. The present study investigates the microstructural behavior of phosphorus implanted pseudomorphic metastable Si0.88Ge0.12 films on silicon, exposed to various anneals.Metastable pseudomorphic Si0.88Ge0.12 films were grown ~265 nm thick on a silicon wafer by molecular-beam epitaxy. Pieces of this wafer were then implanted at room temperature with 100 keV phosphorus ions to a dose of 1.5×1015 cm-2.

Sign in / Sign up

Export Citation Format

Share Document