Evaluation of adhesive failure cases of L joint structures under tensile loading

2018 ◽  
Vol 32 (19) ◽  
pp. 1840058
Author(s):  
Do-Hoon Shin ◽  
Dong-Keun Hyun ◽  
Yun-Hae Kim
Keyword(s):  
Low Cost ◽  
Fuel Efficiency ◽  
Tensile Loading ◽  
Failure Strength ◽  
Adhesive Failure ◽  
Manufacturing Method ◽  
High Fuel Efficiency ◽  
Wide Range ◽  
Temperature Time ◽  
Secondary Bonding

In aerospace, aircraft weight is one of the important factors essential for long range and high fuel efficiency. Instead of fastening, bonding methods like co-curing, co-bonding and secondary bonding are used on the aircraft parts. Secondary bonding was developed for integrated parts because of easy handling, less defect ratio and low cost. During manufacturing, the integrated parts using secondary bonding, bonding strength can show a wide range of failure strengths. Due to inconstant failure strength, the design value can be dropped and reinforcement methods should be applied. To avoid over-designing and to get a constant value for failure, the adhesive failure cases are studied in this project. In this study, L joining composite parts are investigated under tensile loading. Different conditions are tested to select a suitable manufacturing method for secondary bonding methods. From the experimental results, the secondary bonding was sensitive at exposed temperature/time and shape conditions of the fillet. The results show that the failure strength depends on the shape of fillet and exposed time for curing.

Two-Stage Turbocharging Solutions for Tier 4 Rail Applications

2015 ◽  
Author(s):  
Simone Bernasconi ◽  
Ennio Codan ◽  
David Yang ◽  
Pierre Jacoby ◽  
German Weisser
Keyword(s):  
Catalytic Reduction ◽  
Fuel Efficiency ◽  
Engine Performance ◽  
Ambient Conditions ◽  
Two Stage ◽  
Optimum Performance ◽  
Engine Model ◽  
High Fuel Efficiency ◽  
Wide Range ◽  
Turbocharging System

With the introduction of the EPA Tier 4 NOx emission limits for rail diesel engines this year, engine developers are forced to implement more advanced emission control technologies such as selective catalytic reduction (SCR) or cooled external exhaust gas recirculation (EGR). The integration and control of these systems for ensuring optimum performance throughout the operating range brings about new challenges on top of the well-known requirement for unconstrained operability in a very wide range of conditions. As a consequence, engines and their subsystems have to be designed for maximum flexibility. The turbocharging system in particular needs to be capable of dealing with extreme ambient conditions associated with high altitudes, hot summers, severe winters, tunnel operation, etc. This flexibility must be achieved without compromising reliability and while ensuring continuous in-use compliance with the emissions standards throughout the life of the installation. At the same time, engine performance should be maintained at the highest level possible. This study demonstrates that all of these targets can be met by combining two-stage turbocharging and EGR with suitable control elements. Two-stage turbocharging, which has become increasingly popular in other industry sectors due to its potential for improving the bsfc / NOx emissions trade-off when used in combination with correspondingly optimized valve actuation (Miller timing), is starting to be adopted also for rail applications. A variety of EGR concepts was proposed or put into practice over the past few years, and the most important or promising of these have been taken into consideration for this study. Extensive simulations of the resulting engine and turbocharging systems have been performed using ABB’s in-house simulation platform, based on a generic engine model that can be considered representative of the rail sector. It is shown that integration of EGR, two-stage turbocharging and appropriate control elements is highly attractive as it offers outstanding operational flexibility and very high fuel efficiency without any compromise in terms of reliability. The selection and specification of control elements and turbocharging system components depends on the EGR concept applied. As is shown below, this can be tailored to the application to ensure optimum performance and flexibility. In view of these obvious benefits, we are very confident that such integrated EGR / two-stage turbocharging systems will be adopted more widely on railway engines.

scholarly journals Application of Multi-Material 3D Printing for Improved Functionality and Modularity of Open Source Low-Cost Prosthetics: A Case Study

2017 ◽  
Author(s):  
Sachin Bijadi ◽  
Erik de Bruijn ◽  
Erik Y. Tempelman ◽  
Jos Oberdorf
Keyword(s):  
3D Printing ◽  
Open Source ◽  
Low Cost ◽  
Design Approach ◽  
Prosthetic Hand ◽  
User Centered Design ◽  
Manufacturing Method ◽  
Wide Range ◽  
Modular Platform ◽  
Traditional Manufacturing

Low-cost 3D desktop printing, although still in its infancy, is rapidly maturing, with a wide range of applications. With its ease of production and affordability, it has led to development of a global maker culture, with the design and manufacture of artefacts by individuals as a collaborative & creative hobbyist practice. This has enabled mass customization of goods with the potential to disrupt conventional manufacturing, giving more people access to traditionally expensive products like prosthetics and medical devices [1], as is the case with e-NABLE, a global community providing open source prosthetics for people with upper limb deficiencies. However one of the major barriers to proliferation of 3D printing as a major manufacturing method is the limitation of compatible materials for use with the technology [2]. This places constraints on the design approach, as well as the complexity & functionality of artefacts that can be produced with 3D printing as compared to traditional manufacturing methods. As a result, devices like the e-NABLE Raptor Reloaded prosthetic hand, which is designed specifically to be produced via a single extruder FDM desktop 3D printer, have limited functionality as compared to conventional prosthetics, leading to low active use and prosthesis abandonment [3]. However, with the advent of multi-material desktop 3D printing, and increasing availability of a broader range of compatible materials (of varying characteristics) [2], there is scope for improving capabilities of low-cost prosthetics through the creation of more sophisticated multi-material functional integrated devices. This work documents the exploration of potential applications of multi-material 3D printing to improve production, capabilities and usability of low-cost open source prosthetics. Various material combinations were initially studied and functional enhancements for current 3D printed prosthetics were prototyped using key material combinations identified. Further, a user-centered design approach was utilized to develop a novel multi-material anthropomorphic prosthetic hand ‘ex_machina’ based on a modular platform architecture, to demonstrate the scope for reduced build complexity and improved dexterity & functional customization enabled by dual extrusion FDM desktop 3D printing. A full prototype was built & tested with a lead user, and results analyzed to determine scope for optimization.

Aero Engine Development for the Future

1983 ◽  
Vol 197 (3) ◽  
pp. 149-157 ◽  
Author(s):  
H W Bennett
Keyword(s):  
Mechanical Design ◽  
Low Cost ◽  
Fuel Efficiency ◽  
Thermodynamic Cycle ◽  
Aircraft Engine ◽  
Advanced Technology ◽  
High Fuel Efficiency ◽  
Aero Engine ◽  
Improved Performance ◽  
And Performance

A historical survey of the development and future trends in aero engine design and performance are given. Emphasis is placed on the achievement of low cost of ownership through high fuel efficiency. Simple basic principles controlling the conceptual design and performance are described. The choice of engine thermodynamic cycle is discussed with emphasis on the civil transport engine. The differing requirements of the military aircraft engine are briefly stated. Short-term possibilities for improved performance and longer term speculative proposals are made. Advanced technology requirements in materials, mechanical design and aerodynamics are outlined.

scholarly journals Trends and Perspectives in the Design of Mobile Wood Chippers

2020 ◽  
Vol 42 (1) ◽  
pp. 25-38
Author(s):  
Raffaele Spinelli ◽  
Enrico Marchi
Keyword(s):  
Fuel Efficiency ◽  
Maintenance Cost ◽  
Machine Age ◽  
High Productivity ◽  
High Fuel Efficiency ◽  
Wide Range ◽  
Different Types ◽  
Logging Residue

Mobile wood chippers represent a mature technology now available in a wide range of sizes and configurations. Different types exist, but the most widespread are disc and drum chippers. The latter have enjoyed wider popularity in recent years because they are best suited to processing logging residue and other low-quality wood. Drum chippers can be fitted with screens, designed to re-circulate oversize particles. In general, industrial chippers offer high productivity and high fuel efficiency, especially if settings are properly adjusted. Chippers are high-maintenance equipment and require proper care. Maintenance cost increases with machine age and can be predicted quite accurately, and so can chipping productivity and cost. Reliable models exist for estimating both maintenance cost and productivity, based on dedicated user-entered assumptions. All things being equal, there are no substantial productivity and maintenance differences between tractor-powered and independent-engine chippers.

scholarly journals Information and information resources in COVID-19: Awareness, control, and prevention

2021 ◽  
pp. 096100062110165
Author(s):  
Mohammadhiwa Abdekhoda ◽  
Fatemeh Ranjbaran ◽  
Asghar Sattari
Keyword(s):  
Low Cost ◽  
Information Resources ◽  
Age And Gender ◽  
Use Of Resources ◽  
Strategic Approach ◽  
Wide Range ◽  
Data Collection Instrument ◽  
Control And Prevention ◽  
And Gender ◽  
And Control

This study was conducted with the aim of evaluating the role of information and information resources in the awareness, control, and prevention of COVID-19. This study was a descriptive-analytical survey in which 450 participants were selected for the study. The data collection instrument was a researcher-made questionnaire. Descriptive and inferential statistics were used to analyze the data through SPSS. The findings show that a wide range of mass media has become well known as information resources for COVID-19. Other findings indicate a significant statistical difference in the rate of using information resources during COVID-19 based on age and gender; however, this difference is not significant regarding the reliability of information resources with regard to age and gender. Health information has an undisputable role in the prevention and control of pandemic diseases such as COVID-19. Providing accurate, reliable, and evidence-based information in a timely manner for the use of resources and information channels related to COVID-19 can be a fast and low-cost strategic approach in confronting this disease.

scholarly journals Advanced mycelium materials as potential self-growing biomedical scaffolds

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Maria Elena Antinori ◽  
Marco Contardi ◽  
Giulia Suarato ◽  
Andrea Armirotti ◽  
Rosalia Bertorelli ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Low Cost ◽  
Direct Interaction ◽  
Dermal Fibroblasts ◽  
Engineering Systems ◽  
Edible Fungi ◽  
Avant Garde ◽  
Fibrous Network ◽  
Body Tissues ◽  
Wide Range

AbstractMycelia, the vegetative part of fungi, are emerging as the avant-garde generation of natural, sustainable, and biodegradable materials for a wide range of applications. They are constituted of a self-growing and interconnected fibrous network of elongated cells, and their chemical and physical properties can be adjusted depending on the conditions of growth and the substrate they are fed upon. So far, only extracts and derivatives from mycelia have been evaluated and tested for biomedical applications. In this study, the entire fibrous structures of mycelia of the edible fungi Pleurotus ostreatus and Ganoderma lucidum are presented as self-growing bio-composites that mimic the extracellular matrix of human body tissues, ideal as tissue engineering bio-scaffolds. To this purpose, the two mycelial strains are inactivated by autoclaving after growth, and their morphology, cell wall chemical composition, and hydrodynamical and mechanical features are studied. Finally, their biocompatibility and direct interaction with primary human dermal fibroblasts are investigated. The findings demonstrate the potentiality of mycelia as all-natural and low-cost bio-scaffolds, alternative to the tissue engineering systems currently in place.

scholarly journals Rheology and Water Absorption Properties of Alginate–Soy Protein Composites

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1807
Author(s):  
Estefanía Álvarez-Castillo ◽  
José Manuel Aguilar ◽  
Carlos Bengoechea ◽  
María Luisa López-Castejón ◽  
Antonio Guerrero
Keyword(s):  
Soy Protein ◽  
Water Solubility ◽  
Divalent Cations ◽  
Low Cost ◽  
Soy Protein Isolate ◽  
Protein Isolate ◽  
Guluronic Acid ◽  
Wide Range ◽  
Anionic Polysaccharides ◽  
Porous Matrices

Composite materials based on proteins and carbohydrates normally offer improved water solubility, biodegradability, and biocompatibility, which make them attractive for a wide range of applications. Soy protein isolate (SPI) has shown superabsorbent properties that are useful in fields such as agriculture. Alginate salts (ALG) are linear anionic polysaccharides obtained at a low cost from brown algae, displaying a good enough biocompatibility to be considered for medical applications. As alginates are quite hydrophilic, the exchange of ions from guluronic acid present in its molecular structure with divalent cations, particularly Ca2+, may induce its gelation, which would inhibit its solubilization in water. Both biopolymers SPI and ALG were used to produce composites through injection moulding using glycerol (Gly) as a plasticizer. Different biopolymer/plasticizer ratios were employed, and the SPI/ALG ratio within the biopolymer fraction was also varied. Furthermore, composites were immersed in different CaCl2 solutions to inhibit the amount of soluble matter loss and to enhance the mechanical properties of the resulting porous matrices. The main goal of the present work was the development and characterization of green porous matrices with inhibited solubility thanks to the gelation of alginate.

scholarly journals Optically transparent and very thin structure against electromagnetic pulse (EMP) using metal mesh and saltwater for shielding windows

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Duy Tung Phan ◽  
Chang Won Jung
Keyword(s):  
Electromagnetic Pulse ◽  
Low Cost ◽  
High Energy ◽  
Metal Plate ◽  
Optical Transparency ◽  
Shielding Effectiveness ◽  
Concrete Wall ◽  
Metal Mesh ◽  
Wide Range ◽  
Optically Transparent

AbstractAn electromagnetic pulse (EMP) with high energy can damage electronic equipment instantly within a wide range of thousands of kilometers. Generally, a metal plate placed inside a thick concrete wall is used against an EMP, but it is not suitable for an EMP shielding window, which requires not only strong shielding effectiveness (SE) but also optical transparency (OT). In this paper, we propose a very thin and optically transparent structure with excellent SE for EMP shielding window application. The proposed structure consists of a saltwater layer held between two glass substrates and two metal mesh layers on the outside of the glass, with a total thickness of less than 1.5 cm. The SE and OT of the structure are above 80 dB and 45%, respectively, which not only meet the requirement of EMP shielding for military purposes but also retain the procedure of good observation. Moreover, the OT of the structure can be significantly improved using only one metal mesh film (MMF) layer, while the SE is still maintained high to satisfy the required SE for home applicants. With the major advantages of low cost, optical transparency, strong SE, and flexible performance, the proposed structure can be considered a good solution for transparent EMP shielding windows.

scholarly journals Photocatalytic three-component asymmetric sulfonylation via direct C(sp3)-H functionalization

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Shi Cao ◽  
Wei Hong ◽  
Ziqi Ye ◽  
Lei Gong
Keyword(s):  
Asymmetric Catalysis ◽  
Organic Synthesis ◽  
Photochemical Reaction ◽  
Low Cost ◽  
Bioactive Molecules ◽  
Atom Economy ◽  
Mild Conditions ◽  
Wide Range ◽  
Unsaturated Carbonyl Compound ◽  
Direct Functionalization

AbstractThe direct and selective C(sp3)-H functionalization of cycloalkanes and alkanes is a highly useful process in organic synthesis owing to the low-cost starting materials, the high step and atom economy. Its application to asymmetric catalysis, however, has been scarcely explored. Herein, we disclose our effort toward this goal by incorporation of dual asymmetric photocatalysis by a chiral nickel catalyst and a commercially available organophotocatalyst with a radical relay strategy through sulfur dioxide insertion. Such design leads to the development of three-component asymmetric sulfonylation involving direct functionalization of cycloalkanes, alkanes, toluene derivatives or ethers. The photochemical reaction of a C(sp3)-H precursor, a SO2 surrogate and a common α,β-unsaturated carbonyl compound proceeds smoothly under mild conditions, delivering a wide range of biologically interesting α-C chiral sulfones with high regio- and enantioselectivity (>50 examples, up to >50:1 rr and 95% ee). This method is applicable to late-stage functionalization of bioactive molecules, and provides an appealing access to enantioenriched compounds starting from the abundant hydrocarbon compounds.

Glycans in scaffold design in tissue reconstruction

2021 ◽  
pp. 088391152199784
Author(s):  
Nipun Jain ◽  
Shashi Singh
Keyword(s):  
Cell Attachment ◽  
Low Cost ◽  
Growth Conditions ◽  
Downstream Signaling ◽  
Cell Carrier ◽  
Wide Range ◽  
Proliferation And Differentiation ◽  
Different Types ◽  
Tissue Reconstruction ◽  
A Cell

Development of an artificial tissue by tissue engineering is witnessed to be one of the long lasting clarified solutions for the damaged tissue function restoration. To accomplish this, a scaffold is designed as a cell carrier in which the extracellular matrix (ECM) performs a prominent task of controlling the inoculated cell’s destiny. ECM composition, topography and mechanical properties lead to different types of interactions between cells and ECM components that trigger an assortment of cellular reactions via diverse sensing mechanisms and downstream signaling pathways. The polysaccharides in the form of proteoglycans and glycoproteins yield better outcomes when included in the designed matrices. Glycosaminoglycan (GAG) chains present on proteoglycans show a wide range of operations such as sequestering of critical effector morphogens which encourage proficient nutrient contribution toward the growing stem cells for their development and endurance. In this review we discuss how the glycosylation aspects are of considerable importance in everyday housekeeping functions of a cell especially when placed in a controlled environment under ideal growth conditions. Hydrogels made from these GAG chains have been used extensively as a resorbable material that mimics the natural ECM functions for an efficient control over cell attachment, permeability, viability, proliferation, and differentiation processes. Also the incorporation of non-mammalian polysaccharides can elicit specific receptor responses which authorize the creation of numerous vigorous frameworks while prolonging the low cost and immunogenicity of the substance.

Sign in / Sign up

Export Citation Format

Share Document