scholarly journals Synthesis and Characterization of Cockle Shell-Based Calcium Carbonate Aragonite Polymorph Nanoparticles with Surface Functionalization

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Syairah Liyana Mohd Abd Ghafar ◽  
Mohd Zobir Hussein ◽  
Zuki Abu Bakar Zakaria
Keyword(s):  
Electron Microscopy ◽  
Calcium Carbonate ◽  
Surface Functionalization ◽  
Large Scale ◽  
Low Cost ◽  
Synthesis Method ◽  
Industrial Applications ◽  
Raw Material ◽  
Material Source ◽  
Cockle Shell

The development of cockle shell-based calcium carbonate aragonite polymorph nanoparticle synthesis method using the technique of mechanical stirring in the presence of dodecyl dimethyl betaine (BS-12) incorporated with surface functionalization demonstrated high homogeneity of sample product with good nanoparticles dispersion. The cockle shell-based calcium carbonate aragonite nanoparticle with functionalized surface was characterized using transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), particle size distribution, pH measurement analysis, Fourier Transform Infrared (FTIR) spectroscopy, and X-ray diffraction (XRD). Surface functionalization was proven to improve the overall size and shape of the nanoparticles and enhance their dispersion properties, preventing coarse agglomeration among nanoparticles in general. The improved method was verified to retain its aragonite crystalline nature. Additionally, surface functionalization did not increase the size of nanoparticles throughout the modification process. This facile preparation using naturally occurring cockle shells as the main source is environmentally friendly because it provides relatively low cost of raw material source as it is abundantly available in nature and has good mineral purity content. Hence, high quality production of surface functionalized cockle shell-based calcium carbonate aragonite polymorph nanoparticles can potentially be exploited and produced on a large scale for various industrial applications, especially for biomedical purposes in the near future.

scholarly journals Facile Synthesis of Calcium Carbonate Nanoparticles from Cockle Shells

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Kh. Nurul Islam ◽  
A. B. Z. Zuki ◽  
M. E. Ali ◽  
Mohd Zobir Bin Hussein ◽  
M. M. Noordin ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Calcium Carbonate ◽  
Large Scale ◽  
Low Cost ◽  
Analytical Techniques ◽  
Variable Pressure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir

A simple and low-cost method for the synthesis of calcium carbonate nanoparticles from cockle shells was described. Polymorphically, the synthesized nanoparticles were aragonites which are biocompatible and thus frequently used in the repair of fractured bone and development of advanced drug delivery systems, tissue scaffolds and anticarcinogenic drugs. The rod-shaped and pure aragonite particles of30±5 nm in diameter were reproducibly synthesized when micron-sized cockle shells powders were mechanically stirred for 90 min at room temperature in presence of a nontoxic and nonhazardous biomineralization catalyst, dodecyl dimethyl betaine (BS-12). The findings were verified using a combination of analytical techniques such as variable pressure scanning electron microscopy (VPSEM), transmission electron microscopy (TEM), Fourier transmission infrared spectroscopy (FT-IR), X-ray diffraction spectroscopy (XRD), and energy dispersive X-ray analyser (EDX). The reproducibility and low cost of the method suggested that it could be used in industry for the large scale synthesis of aragonite nanoparticles from cockle shells, a low cost and easily available natural resource.

scholarly journals Red Mud-Based Polyaluminum Ferric Chloride Flocculant: Preparation, Characterization and Flocculation Performance

2021 ◽  
Author(s):  
Yong Cheng ◽  
Longjun Xu ◽  
Chenglun Liu ◽  
Zao Jiang ◽  
Qiyuan Zhang ◽  
...  
Keyword(s):  
Red Mud ◽  
High Efficiency ◽  
Low Cost ◽  
Oxygen Demand ◽  
Industrial Applications ◽  
Iron Chloride ◽  
Raw Material ◽  
Molar Ratio ◽  
Polymerization Temperature ◽  
Solution Ph

Abstract In this work, red mud was used as raw material to extract Al and Fe with hydrochloric acid. The high-efficiency polyaluminum iron chloride (PAFC) flocculant was prepared via adjusting the pH of the leaching solution, the molar ratio of aluminum and iron, and the polymerization temperature. The effect of synthesis and flocculation conditions on the flocculation performance of aged landfill leachate was investigated. The results confirmed that the PAFC prepared at the polymerization pH of 2.5, the Al/Fe molar ratio of 8, and the polymerization temperature of 70 °C had the optimum flocculation effect. The flocculation consequences of PAFC and commercial polyaluminum iron chloride flocculant (CPAFC) under different flocculation conditions were compared. The chemical oxygen demand (COD), UV254, chroma and settlement height of PAFC at flocculant concentration of 60 g/L and solution pH of 6 were 72.2%, 79.2%, 82.9% and 9.5 cm (within 90 min), respectively. PAFC has excellent flocculation performance and can be used as a simple, potentially low-cost wastewater treatment agent in industrial applications.

Solution-Based Synthesis of Magnesium Oxide Nanorods

1999 ◽  
Vol 581 ◽  
Author(s):  
Q. Wei ◽  
C.M. Lieber
Keyword(s):  
Electron Microscopy ◽  
Magnesium Oxide ◽  
Magnesium Chloride ◽  
Low Cost ◽  
Industrial Applications ◽  
Transformation Process ◽  
Matrix Composites ◽  
X Ray ◽  
Transmission Electron ◽  
Oxide Nanorods

ABSTRACTA solution-based synthesis route was developed to produce large quantities of MgO nanorods. Hydrated basic magnesium chloride, which has needle-like crystal structure, was used as a precursor. A subsequent two-step transformation process with magnesium hydroxide as an intermediate product was used to preserve the morphology of the precursor to yield magnesium oxide nanorods. Scanning electron microscopy, powder X-ray diffraction and energy dispersive X-ray spectroscopy show that the products are very pure (>95%) crystalline MgO nanorods with diameters from 40 nm to 200 nm and lengths 10 microns or longer. High-resolution transmission electron microscopy and electron diffraction further reveal that these MgO nanorods are single crystals and that the rod axis is along the <110> crystal direction. A model for the structural transformation from hydrated basic magnesium chloride to magnesium oxide has been developed and compared to our experimental results. This solution-based process can be easily scaled-up, and is a low-cost source of pure magnesium oxide nanorods needed in many industrial applications, for example, as reinforcing agents in matrix composites and as flux-pinning centers in high-TC superconductors.

Low friction bio-inspired polydopamine/polytetrafluoroethylene coating performance in hydrodynamic bearings

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Marius Rutkevičius ◽  
Jimmy Dong ◽  
Darren Tremelling ◽  
Julia Viertel ◽  
Samuel Beckford
Keyword(s):  
Large Scale ◽  
Journal Bearing ◽  
Low Cost ◽  
Optical Microscope ◽  
Polymer Coatings ◽  
Industrial Applications ◽  
Low Friction ◽  
Coating Performance ◽  
Content Type ◽  
Coating Delamination

Purpose Low friction polymer coatings able to withstand high loadings and many years of continuous operation are difficult to formulate at low cost, but could find many applications in industry. This study aims to analyze and compare friction and wear performance of novel polydopamine/polytetrafluoroethylene (PDA/PTFE) and traditional tin Babbitt coatings applied to an industrial journal bearing. Design/methodology/approach This paper tested PTFE based coating, co-deposited with PDA, a biopolymer allowing sea mussels to adhere to ocean rocks. This coating was deposited on flat steel substrates and on a curved cast iron hydrodynamic journal bearing surface. The flat substrates were analyzed with a tribometer and an optical microscope, while the coated bearing liners were tested in an industrial laboratory setting at different speeds and different radial loads. Findings PDA/PTFE coating showed 2-3 times lower friction compared to traditional tin Babbitt for flat substrates, but higher friction in the bearing liners. PDA/PTFE also showed considerable wear through coating delamination and abrasion in the bearing liners. Research limitations/implications Five future modifications to mitigate coating flaws are provided, which include modifications to coating thickness and its surface finish. Originality/value While the novel coating showed excellent results on flat substrates, coating performance in a large scale bearing was found to be poor. This study shows that coating preparation needs to be improved to avoid frictional losses and unwanted damage to bearings. We provide several routes that could improve coating performance in industrial applications.

scholarly journals Effectiveness of Calcium Carbonate Whisker in Cementitious Composites

2020 ◽  
Author(s):  
Mingli Cao ◽  
Mehran Khan ◽  
Shakeel Ahmed
Keyword(s):  
Calcium Carbonate ◽  
Large Scale ◽  
Low Cost ◽  
Complex Structure ◽  
Construction Materials ◽  
Physical And Mechanical Properties ◽  
Cementitious Composites ◽  
Toughening Mechanism ◽  
Micro Scale ◽  
Calcium Carbonate Whisker

Cementitious composites are porous material having complex structure system consist of hydration products, un-hydrated cement particles and pore solutions of various scales. Calcium carbonate whisker is a new type of low cost micro-scale filler fiber gaining popularity in the field of construction materials. However, addition of whisker has effect on physical, mechanical and microstructural characteristics of cementitious composites. Also, the low production cost of whisker will make the use of micro fiber more extensive in large scale construction projects. In this study, the effect of calcium carbonate whisker on physical, mechanical and microstructural properties of cementitious composites with different fiber contents are investigated. The fluidity, drying shrinkage, pore structure, impact resistance, compressive, flexural and splitting-tensile strength of whisker-mortar are considered. The scanning electron microscopy analysis is also performed to examine the microstructural and toughening mechanism of whisker reinforced composites. It was concluded that the addition of calcium carbonate whisker up to 10 % improves the physical and mechanical properties of cementitious composites and is suggested to be the optimize content. The calcium carbonate whisker also resists the crack propagation at micro scale and showed the toughening mechanism with better interfacial properties between whisker and matrix.

scholarly journals Facile bottom-up synthesis of partially oxidized black phosphorus nanosheets as metal-free photocatalyst for hydrogen evolution

2018 ◽  
Vol 115 (17) ◽  
pp. 4345-4350 ◽  
Author(s):  
Bin Tian ◽  
Bining Tian ◽  
Bethany Smith ◽  
M. C. Scott ◽  
Qin Lei ◽  
...  
Keyword(s):  
Large Scale ◽  
Field Effect Transistors ◽  
Low Cost ◽  
Pure Water ◽  
Black Phosphorus ◽  
Raw Material ◽  
Bottom Up ◽  
Metal Free ◽  
Wet Chemical Synthesis ◽  
Intense Activity

Few-layer black phosphorus (BP) nanosheets were first reported as a 2D material for the application of field-effect transistors in 2014 and have stimulated intense activity among physicists, chemists, and material and biomedical scientists, driving research into novel synthetic techniques to produce BP nanosheets. At present, exfoliation is the main route toward few-layer BP nanosheets via employing bulk BP as raw material. However, this is a complicated and time-consuming process, which is difficult for the large-scale synthesis of BP nanosheets. Moreover, BP degrades rapidly when exfoliated to nanoscale dimensions, resulting in the rapid loss of semiconducting properties. Here, we report the direct wet-chemical synthesis of few-layer BP nanosheets in gram-scale quantities in a bottom-up approach based on common laboratory reagents at low temperature, showing excellent stability due to partial oxidation of surface. Solvent and temperature are two critical factors, controlling not only the formation of BP nanosheets but also the thickness. The as-prepared BP nanosheets can extract hydrogen from pure water (pH = 6.8), exhibiting more than 24-fold higher activity than the well-known C3N4 nanosheets. Our results reporting the ability to prepare few-layer BP nanosheets with a facile, scalable, low-cost approach take us a step closer to real-world applications of phosphorene including next-generation metal-free photocatalysts for photosynthesis.

The Production of Reduced Graphene Oxide by a Low-Cost Vacuum System for Supercapacitor Applications

2018 ◽  
Vol 930 ◽  
pp. 609-612
Author(s):  
Quezia Cardoso ◽  
Franks Martins Silva ◽  
Ligia Silverio Vieira ◽  
Julio Cesar Serafim Casini ◽  
Solange Kazume Sakata ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Large Scale ◽  
Low Cost ◽  
High Vacuum ◽  
Cost Effective ◽  
Practical Method ◽  
Raw Material ◽  
Vacuum System ◽  
X Ray ◽  
Pump Pressure

Graphene has attracted significant interest because of its excellent electrical properties. However, a practical method for producing graphene on a large scale is yet to be developed. Graphene oxide (GO) can be partially reduced to graphene-like sheets by removing the oxygen-containing groups and recovering the conjugated structure. GO can be produced using inexpensive graphite as the raw material via cost-effective chemical methods. High vacuum and temperature (10−7 mbar and 1100°C, respectively) conditions are well-known to enable the preparation of reduced powder at the laboratory scale. However, a large-scale high vacuum reduction system that can be routinely operated at 10−7 mbar requires considerable initial capital as well as substantial operational and maintenance costs. The current study aims at developing an inexpensive method for the large-scale reduction of graphene oxide. A stainless steel vessel was evacuated to backing-pump pressure (10−2 mbar) and used to process GO at a range of temperatures. The reduction of GO powder at low vacuum pressures was attempted and investigated by X-ray diffraction and Fourier transform infrared spectroscopy. The experimental results of processing GO powder at various temperatures (200–1000°C) at relatively low pressures are reported. The microstructures of the processed materials were investigated using scanning electron microscopy and chemical microanalyses via energy dispersive X-ray analysis.

scholarly journals Non-Precious Electrodes for Practical Alkaline Water Electrolysis

Materials ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1336 ◽  
Author(s):  
Alejandro N. Colli ◽  
Hubert H. Girault ◽  
Alberto Battistel
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Renewable Energy Sources ◽  
Water Electrolysis ◽  
Industrial Applications ◽  
Alkaline Water Electrolysis ◽  
Stainless Steel 316L ◽  
Experimental Conditions ◽  
Alkaline Water ◽  
Cell Components

Water electrolysis is a promising approach to hydrogen production from renewable energy sources. Alkaline water electrolyzers allow using non-noble and low-cost materials. An analysis of common assumptions and experimental conditions (low concentrations, low temperature, low current densities, and short-term experiments) found in the literature is reported. The steps to estimate the reaction overpotentials for hydrogen and oxygen reactions are reported and discussed. The results of some of the most investigated electrocatalysts, namely from the iron group elements (iron, nickel, and cobalt) and chromium are reported. Past findings and recent progress in the development of efficient anode and cathode materials appropriate for large-scale water electrolysis are presented. The experimental work is done involving the direct-current electrolysis of highly concentrated potassium hydroxide solutions at temperatures between 30 and 100 °C, which are closer to industrial applications than what is usually found in literature. Stable cell components and a good performance was achieved using Raney nickel as a cathode and stainless steel 316L as an anode by means of a monopolar cell at 75 °C, which ran for one month at 300 mA cm−2. Finally, the proposed catalysts showed a total kinetic overpotential of about 550 mV at 75 °C and 1 A cm−2.

A Low Cost ZSM-5 Zeolite Obtained from Rice Hull Ash

2005 ◽  
Vol 498-499 ◽  
pp. 676-680 ◽  
Author(s):  
A.A. Fernandes ◽  
E.U.C. Frajndlich ◽  
Humberto Gracher Riella
Keyword(s):  
Large Scale ◽  
High Efficiency ◽  
Low Cost ◽  
Amorphous Structure ◽  
Industrial Applications ◽  
Rice Hull ◽  
Rice Hull Ash ◽  
Industry Waste ◽  
Pure Silica ◽  
Zeolite Formation

The high pure synthetic zeolite have a large application in industry and agriculture, being nowadays in majority imported in Brazil. The biomass like rice hull ash (RHA), a rice industry waste, can be real advantageous in manufacture of different materials, since that is produced in large scale in the country. The silica extraction from RHA by alkaline leaching is a low energetic coast process and high efficiency, obtaining high pure silica with high reactive amorphous structure, very interesting for zeolite production. In this work was developed a economically feasible route for the production of high purity and crystallinity ZSM-5 zeolite, free of expensive template, starting from a low value intake, a industrial waste, producing a high value materials. The extracted silica from RHA in sodium silicate form is precipitated in the proper zeolite formation reactional mixture. The ZSM-5 have a lot of industrial applications due your high selectivity in catalytic reactions and high thermal and acid stability.

Characterization, Photoluminescence and Magnetic Properties of SiC Nanowires Synthesized with Nickel Catalyst via Microwave Heating

2013 ◽  
Vol 873 ◽  
pp. 188-194 ◽  
Author(s):  
Song Liu ◽  
Shan Huang ◽  
Ji Gang Wang
Keyword(s):  
Electron Microscopy ◽  
Magnetic Properties ◽  
Microwave Heating ◽  
Large Scale ◽  
Raw Materials ◽  
Low Cost ◽  
Energy Dispersive Spectrum ◽  
Sic Nanowires ◽  
Vls Growth ◽  
Protective Gas

Large scale SiC nanowires were synthesized through a rapid and low-cost microwave heating method. Silicon, silica, graphite and nickel powders were used as raw materials and catalyst, respectively, and no inert protective gas was employed during the preparation. The microstructures of the products were comprehensively characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and transmission electron microscopy (TEM). Results showed that the nanowires have lengths of several dozens of micrometers and diameters of 50nm approximately. The growth of them was governed by vapor-liquid-solid (VLS) growth mechanism. In addition, the photoluminescence (PL) and magnetic properties of the products were subsequently investigated by fluorescent photometer and vibrating sample magnetometer (VSM). The PL spectrum, employing a Xe laser (240 nm) as an excitation source, shows an emission band centered at about 390 nm, indicating that the obtained SiC nanowires possess excellent optical property. The hysteresis loop shows big magnetic saturation (Ms) of 0.96 emu/g and small coercivity (Hc) of 37.92 Oe. So, the obtained SiC nanowires can be characterized as typical soft magnetic material, and the improvement of magnetic properties may be attributed to the existence of Ni2Si phase in the SiC nanowires.

Sign in / Sign up

Export Citation Format

Share Document