scholarly journals Optimization of the Plastic Area of a Borehole Based on the Gas Extraction Effect and Its Engineering Application

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Kuan Wu ◽  
Shiliang Shi ◽  
Yi Lu ◽  
He Li ◽  
Min Li
Keyword(s):  
Plastic Zone ◽  
Engineering Application ◽  
Gas Extraction ◽  
Key Factors ◽  
Relative Variation ◽  
Factors Affecting ◽  
Gas Expansion ◽  
Zone Radius ◽  
Modified Equation ◽  
Optimal Radius

Gas extraction is most commonly used to control gas disasters in coal mines. The distribution of the plastic zone around a borehole and the sealing quality are key factors affecting gas extraction. In this paper, the plastic zone was simulated by COMSOL, and a theoretical equation of the plastic zone radius was derived. In addition, an antispray hole equipment and the “two plugging and one injection” sealing technology were proposed. The results show that a larger borehole pore size corresponds to a larger plastic zone and larger range of pressure relief of the borehole. The error between the calculated and simulated plastic zone radii is within 1%, and the modified equation is applicable to Puxi mine. The loss and harm caused by borehole spraying are reduced by applying antispray hole equipment. By applying the “two plugging and one injection” sealing technology and phosphogypsum-based self-produced gas expansion paste material to block the borehole, the sealing quality is improved and an accurate gas mixing flow, pure flow, and concentration were obtained. As the plastic zone enlarges, the gas extraction flow gradually increases with, but the relative variation of flow first increases and subsequently decreases. Considering the safety and economy of construction, the optimal radius of the plastic zone is 64.9 mm.

EVALUATION OF FINANCIAL SECURITY OF THE REPUBLIC OF CRIMEA

2020 ◽  
pp. 56-67
Author(s):  
Elena Evgenevna Mashyanova ◽  
Elena Aleksandrovna Smirnova
Keyword(s):  
Financial Markets ◽  
Negative Impact ◽  
Gradual Increase ◽  
Financial System ◽  
Financial Security ◽  
Key Factors ◽  
Factors Affecting ◽  
External Threats ◽  
The Republic ◽  
Global Financial System

In modern conditions of development, financial security is an integral part of the overall security of the region and is formed on the basis of the functioning of the financial system. The complication of relationships between key segments of international financial markets, as well as the limited ability to accurately predict future trends in the development of the global financial system, lead to a gradual increase in the risks that accompany the activities of economic entities, and an increase in the number and scale of internal and external threats that have a negative impact on the financial security of the state. This formulation of the issue requires generalization of approaches to determining the financial security of the region in order to further formalize this issue and determine the key factors affecting it. The article considers the types of financial security, as well as certain areas of ensuring the financial security of the region and their priority. In work the assessment of the level of socio-economic development of the region with a view to ensuring financial security on the basis of which offers the main activities and priority areas of implementation of the investment policy that will ensure financial security of the Republic of Crimea.

scholarly journals Comparison of the sensitivity of Western blotting between PVDF and NC membranes

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yufang Xiang ◽  
Yuanyuan Zheng ◽  
Shaobo Liu ◽  
Gang Liu ◽  
Zhi Li ◽  
...  
Keyword(s):  
Western Blotting ◽  
Polyvinylidene Fluoride ◽  
Staining Intensity ◽  
Detection Sensitivity ◽  
Key Factors ◽  
Post Translational Modifications ◽  
Factors Affecting ◽  
Molecular Weights ◽  
Direct Blue ◽  
The Relationship

AbstractWestern blotting (WB) is one of the most widely used techniques to identify proteins as well as post translational modifications of proteins. The selection of electroblotted membrane is one of the key factors affecting the detection sensitivity of the protein which is transferred from gel to membrane in WB. The most common used membranes are polyvinylidene fluoride (PVDF) and nitrocellulose (NC) membranes. Which membrane of these two is more suitable for WB has not been reported so far. Here, by incubating proteins which were transferred to PVDF or NC membranes with a series of antibodies and different types of lectins, we investigated the relationship between the binding ability of these two membranes to proteins or glycoproteins and the molecular weight of the target protein. The antibody re-probed ability of the two membranes was also explored. Moreover, we verified the above results by directly incubating proteins having different molecular weights onto PVDF or NC membranes. Bound proteins were stained with direct blue-71, and the staining intensity was quantitated by scanning and densitometry.

scholarly journals The Effects of Mobility as a Service and Autonomous Vehicles on People’s Willingness to Own a Car in the Future

2021 ◽  
Vol 13 (4) ◽  
pp. 1962
Author(s):  
Timo Liljamo ◽  
Heikki Liimatainen ◽  
Markus Pöllänen ◽  
Riku Viri
Keyword(s):  
Public Transport ◽  
Autonomous Vehicles ◽  
Travel Behaviour ◽  
Car Ownership ◽  
Key Factors ◽  
Sustainable Mobility ◽  
Factors Affecting ◽  
Mobility Service ◽  
The Future ◽  
Mobility Behaviour

Car ownership is one of the key factors affecting travel behaviour and thus also essential in terms of sustainable mobility. This study examines car ownership and how people’s willingness to own a car may change in the future, when considering the effects of public transport, Mobility as a Service (MaaS) and automated vehicles (AVs). Results of two citizen surveys conducted with representative samples (NAV-survey = 2036; NMaaS-survey = 1176) of Finns aged 18–64 are presented. The results show that 39% of respondents would not want or need to own a car if public transport connections were good enough, 58% if the described mobility service was available and 65% if all vehicles in traffic were automated. Hence, car ownership can decrease as a result of the implementation of AVs and MaaS, and higher public transport quality of service. Current mobility behaviour has a strong correlation to car ownership, as respondents who use public transport frequently feel less of a will or need to own a car than others. Generally, women and younger people feel less of a will or need to own a car, but factors such as educational level and residential location seem to have a relatively low effect.

scholarly journals Optimize Design of Run-Flat Tires by Simulation and Experimental Research

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 474
Author(s):  
Huaqiao Liu ◽  
Yiren Pan ◽  
Huiguang Bian ◽  
Chuansheng Wang
Keyword(s):  
Stress Distribution ◽  
Energy Loss ◽  
Successful Implementation ◽  
Performance Tests ◽  
Key Factors ◽  
Heat Accumulation ◽  
Factors Affecting ◽  
Structural Rigidity ◽  
Key Factor ◽  
Durability Testing

In this study, the two key factors affecting the thermal performance of the insert rubber and stress distribution on the tire sidewall were analyzed extensively through various performance tests and simulations to promote the development of run-flat tires. Four compounds and two structures of insert rubber were designed to investigate the effects of heat accumulation and stress distribution on durability testing at zero pressure. It was concluded that the rigidity and tensile strength of the compound were negatively correlated with temperature. The deformation was a key factor that affects energy loss, which could not be judged solely by the loss factor. The stress distribution, however, should be considered in order to avoid early damage of the tire caused by stress concentration. On the whole, the careful balance of mechanical strength, energy loss, and structural rigidity was the key to the optimal development of run-flat tires. More importantly, the successful implementation of the simulations in the study provided important and useful guidance for run-flat tire development.

Improving the Strength of Abrasive Wheels and Optimizing the Control over the Strength of Composite Abrasive Materials

2019 ◽  
Vol 946 ◽  
pp. 380-385
Author(s):  
Boris A. Chaplygin ◽  
Viacheslav V. Shirokov ◽  
Tat'yana A. Lisovskaya ◽  
Roman A. Lisovskiy
Keyword(s):  
Mechanical Properties ◽  
Test Results ◽  
Key Factors ◽  
Special Equipment ◽  
Material Density ◽  
Factors Affecting ◽  
Control Factors ◽  
Reinforcing Material ◽  
Special Studies ◽  
First Time

The strength of abrasive wheels is one of the key factors affecting the performance of abrasive machining. The paper discusses ways to improve the strength of abrasive wheels. The stress-state mathematical model presented herein is a generalization of the existing models. It is used herein to find for the first time that there are numerous optimal combinations of the elastic modulus and reinforcing material density, which result in the same minimum value of the objective function. It is found out that increasing the radius of the reinforcing component while also optimizing the mechanical properties of its material may increase the permissible breaking speed of the wheel several times. We herein present a regression equation and a nomogram for finding the optimal combination of control factors. Conventional methods for testing the mechanical properties of materials, which have been proven reliable for testing metals and alloys, are not as reliable for testing abrasive materials, as the test results they generate are not sufficiently stable or accurate. We therefore propose an alternative method that does not require any special equipment or special studies.

scholarly journals Lessons Learned From Nonsignificant Findings in Exercise With Individuals With Dementia

2020 ◽  
Vol 4 (Supplement_1) ◽  
pp. 850-850
Author(s):  
Nicole Dawson ◽  
Heather Menne
Keyword(s):  
Alzheimer’S Disease ◽  
Alzheimer's Disease ◽  
Lessons Learned ◽  
Exercise Science ◽  
Key Factors ◽  
Pharmacological Interventions ◽  
Factors Affecting ◽  
Exercise Interventions ◽  
Functional Reach ◽  
Critical Intervention

Abstract The National Institute on Aging recognizes the importance of identifying promising non-pharmacological interventions (NPI) to promote health in individuals with Alzheimer’s disease and related dementias. Several systematic reviews have been completed investigating exercise in this population resulting in mixed evidence regarding efficacy across functional domains. It is critical to investigate the methodological factors from the original interventions for a true understanding of these findings as to not outright dismiss exercise as beneficial. One example is Ohio’s replication of Reducing Disability in Alzheimer’s Disease (n=508), which resulted in no significant improvements in physical performance for individuals with dementia ((gait speed (p=.81), balance (p=.82), functional reach (p=.58)). In this investigation, along with many others, researchers were not guided by key principles of exercise science leading to critical intervention design and methodological flaws. Thus, exercise interventions for individuals with dementia need to include interpretations of non-findings and report key factors affecting the outcomes.

scholarly journals Factors Affecting the Initial Engagement of Older Adults in the Use of Interactive Technology

2021 ◽  
Vol 18 (6) ◽  
pp. 2847
Author(s):  
Lina Lee ◽  
Mary Lou Maher
Keyword(s):  
Older Adults ◽  
Interactive Technology ◽  
Key Factors ◽  
Group Discussions ◽  
Interactive Technologies ◽  
Factors Affecting ◽  
Diary Studies ◽  
User Focus ◽  
Depth Interviews

Smart environments and the use of interactive technology has the potential to improve the quality of life for the senior community as well as to support the connections among the senior community and the world outside their community. In addition to the increasing number of studies in the field of aging and technologies, research is needed to understand the practical issues of user focus, adoption, and engagement for older adults to accept interactive technologies in their lives. In this study, we use two commercial technological interventions (uDraw and GrandPad) to understand technology-related perceptions and behaviors of older adults. We present five case studies that emerge from empirical observations of initial engagement with technology through research methods such as focus group discussions, in-depth interviews, observations, and diary studies. The contributions of this study are identification of the key factors that influence the initial engagement with interactive technology for older adults.

Sign in / Sign up

Export Citation Format

Share Document