DETERMINATION OF DENSITY FOR REDUCTION OF GRAVIMETER OBSERVATIONS*

Geophysics ◽  
1939 ◽  
Vol 4 (3) ◽  
pp. 176-183 ◽  
Author(s):  
L. L. Nettleton
Keyword(s):  
Effective Density ◽  
Topographic Feature ◽  
Near Surface ◽  
Gravity Station ◽  
Topographic Features ◽  
The Past ◽  
Surface Materials ◽  
Density Factor

This paper outlines a method whereby the density factor used in the Bouguer correction for elevation of a gravity station may be determined. Frequently in the past it has been the practice to assign a density factor based on measurements made upon samples of surface materials in such manner as to give the density in situ, depending upon the judgment of the field man to select samples representative of the near-surface materials. At best, this is a cursory determination which only fortuitously might lead to the correct density for large topographic features. The method outlined here in effect weighs the topography by gravimeter observations taken along a profile crossing the feature. From these data the effective density of the material comprising the topographic feature is determined by a simple graphtcal method.

scholarly journals Structure Determination of Microtubules and Pili: Past, Present, and Future Directions

2022 ◽  
Vol 8 ◽  
Author(s):  
James A. Garnett ◽  
Joseph Atherton
Keyword(s):  
Ex Vivo ◽  
Structural Heterogeneity ◽  
Resonance Spectroscopy ◽  
Future Directions ◽  
Computational Approaches ◽  
The Past ◽  
Major Shift ◽  
Technical Innovations

Historically proteins that form highly polymeric and filamentous assemblies have been notoriously difficult to study using high resolution structural techniques. This has been due to several factors that include structural heterogeneity, their large molecular mass, and available yields. However, over the past decade we are now seeing a major shift towards atomic resolution insight and the study of more complex heterogenous samples and in situ/ex vivo examination of multi-subunit complexes. Although supported by developments in solid state nuclear magnetic resonance spectroscopy (ssNMR) and computational approaches, this has primarily been due to advances in cryogenic electron microscopy (cryo-EM). The study of eukaryotic microtubules and bacterial pili are good examples, and in this review, we will give an overview of the technical innovations that have enabled this transition and highlight the advancements that have been made for these two systems. Looking to the future we will also describe systems that remain difficult to study and where further technical breakthroughs are required.

In situobservation of morphological changes of γ′ precipitates in a pre-deformed single-crystal Ni-base superalloy

2011 ◽  
Vol 44 (5) ◽  
pp. 935-944 ◽  
Author(s):  
Pavel Strunz ◽  
Gerhard Schumacher ◽  
Hellmuth Klingelhöffer ◽  
Albrecht Wiedenmann ◽  
Jan Šaroun ◽  
...  
Keyword(s):  
External Load ◽  
Morphological Changes ◽  
The Past ◽  
Subsequent Heating ◽  
Detailed Evaluation ◽  
The Matrix ◽  
Base Superalloy

Exposure of a superalloy to an external load results in anisotropic coarsening of the γ′ precipitates, so-called rafting. It was reported in the past that γ′ rafting can also occur as a result of purely thermal treatment, without the simultaneous presence of an external load, if the specimen has been pre-deformed at relatively low temperature. The evolution of γ′ morphology in pre-deformed specimens of SCA425 Ni-base superalloy was examined in the present study. Unlike in the previous experiments, the compressive stress was used for pre-straining.In situsmall-angle neutron scattering (SANS) was employed, which enabled the determination of the morphology directly at high temperature. Both for strong and for weak pre-straining, rounding of the originally cuboidal precipitates towards an ellipsoidal shape on heating was observed. Weak pre-straining (0.1, 0.5%) does not cause rafting on subsequent heating. On the other hand, the detailed evaluation of SANS data provides some indication of rafting during the subsequent heating after severe compressive pre-straining (2%). The experiment indicates the role of dislocation rearrangement at the matrix/precipitate interface during pre-straining.

In Situ XRD Stress Analysis during Expansion of Stents

2013 ◽  
Vol 768-769 ◽  
pp. 406-411 ◽  
Author(s):  
Wolfgang Kowalski ◽  
Markus Dammer ◽  
Frank Bakczewitz ◽  
Olaf Kessler
Keyword(s):  
Human Body ◽  
Compressive Load ◽  
Element Analysis ◽  
Near Surface ◽  
Balloon Catheters ◽  
Stent Expansion ◽  
Important Design

Stents are medical implants, which are applied to keep cavities in the human body open, e.g. blood vessels. Typically they consist of tube-like grids of suitable metal alloys. Typical dimensions depend on their applications: outer diameters in the mm-range and grid bar thickness in the 100 µm range. Before implantation, stents are compressed (crimped) to allow implantation in the human body. During implantation, stents are expanded, usually by balloon catheters. Crimping as well as expansion causes high strains and high stresses locally in the grid bars. These strains and stresses are important design criteria of stents. Usually, they are calculated numerically by Finite Element Analysis (FEA) [1,2]. The XRD-sin²ψ-technique is applied for in-situ-determination of stress conditions during crimping and expansion of stents of the CoCr-alloy L-605. This provides a realistic characterization of the near-surface stress state and an evaluation of the numerical FEA results. XRD-results show an increasing compressive load stress in circumferential direction with increasing stent expansion. These findings correlate with the numerical FEA results. Further residual stresses after removing the expansion device have been measured.

scholarly journals A Method of Determining Channeling Parameters in Backscattering Geometry

2019 ◽  
Vol 7 ◽  
pp. 122
Author(s):  
M. Kokkoris ◽  
S. Kossionides ◽  
T. Paradellis ◽  
Ch. Zarkadas ◽  
E. N. Gazis ◽  
...  
Keyword(s):  
Energy Loss ◽  
Resonance Phenomenon ◽  
Experimental Setup ◽  
Nuclear Resonance ◽  
Monte Carlo Calculations ◽  
The Past ◽  
Transmission Geometry ◽  
Good Agreement

The energy loss of channeled protons in silicon has been measured in the past in the transmission geometry and was found to be approximately half of the normal loss, thus confirming the equipartition rule. Other measurements however, concerning different crystals (e.g. Ge), deviated from this theory. In the backscattering geometry, the most successful corresponding attempts combined RBS with the nuclear resonance phenomenon. Nevertheless, they involved ether considerable additions to the standard goniometer setup commonly used, or tedious Monte-Carlo calculations, thus limiting their applicability. ïïi the present work, a method for the determination of the energy loss and dechanneling probabilities of axially channeled protons in silicon [100], in the energy range Ep = 1.7-2.6 MeV, is presented. It is carried out in situ, using the same experimental setup and beam properties (size, divergence) with the ones present in the actual analysis of a sample. The results obtained are in good agreement with already existing values in literature.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Transmission Electron Microscopy of Protein Macromolecules

1971 ◽  
Vol 29 ◽  
pp. 424-425
Author(s):  
Henry S. Slayter
Keyword(s):  
Biological Systems ◽  
Metal Vapor ◽  
Resolving Power ◽  
Electron Microscopic ◽  
Chemical Methods ◽  
Molecular Weights ◽  
The Past ◽  
Physical Chemical ◽  
Transmission Electron

Electron microscopic methods have been applied increasingly during the past fifteen years, to problems in structural molecular biology. Used in conjunction with physical chemical methods and/or Fourier methods of analysis, they constitute powerful tools for determining sizes, shapes and modes of aggregation of biopolymers with molecular weights greater than 50, 000. However, the application of the e.m. to the determination of very fine structure approaching the limit of instrumental resolving power in biological systems has not been productive, due to various difficulties such as the destructive effects of dehydration, damage to the specimen by the electron beam, and lack of adequate and specific contrast. One of the most satisfactory methods for contrasting individual macromolecules involves the deposition of heavy metal vapor upon the specimen. We have investigated this process, and present here what we believe to be the more important considerations for optimizing it. Results of the application of these methods to several biological systems including muscle proteins, fibrinogen, ribosomes and chromatin will be discussed.

In situ microprobe quantitation of inorganic particle burden in paraffin sections of lung tissue

1988 ◽  
Vol 46 ◽  
pp. 990-991
Author(s):  
Jerrold L. Abraham
Keyword(s):  
Lung Tissue ◽  
Quantitative Information ◽  
Particulate Material ◽  
Paraffin Sections ◽  
Tissue Samples ◽  
Qualitative And Quantitative ◽  
The Past ◽  
Quantitative Analyses ◽  
Data Result

Inorganic particulate material of diverse types is present in the ambient and occupational environment, and exposure to such materials is a well recognized cause of some lung disease. To investigate the interaction of inhaled inorganic particulates with the lung it is necessary to obtain quantitative information on the particulate burden of lung tissue in a wide variety of situations. The vast majority of diagnostic and experimental tissue samples (biopsies and autopsies) are fixed with formaldehyde solutions, dehydrated with organic solvents and embedded in paraffin wax. Over the past 16 years, I have attempted to obtain maximal analytical use of such tissue with minimal preparative steps. Unique diagnostic and research data result from both qualitative and quantitative analyses of sections. Most of the data has been related to inhaled inorganic particulates in lungs, but the basic methods are applicable to any tissues. The preparations are primarily designed for SEM use, but they are stable for storage and transport to other laboratories and several other instruments (e.g., for SIMS techniques).

An atomic-resolution microscope study of Al contracts on GaAs

1986 ◽  
Vol 44 ◽  
pp. 726-727
Author(s):  
Z. Liliental-Weber ◽  
C. Nelson ◽  
R. Ludeke ◽  
R. Gronsky ◽  
J. Washburn
Keyword(s):  
High Speed ◽  
Schottky Contacts ◽  
Detailed Knowledge ◽  
The Past ◽  
Semiconductor Interfaces ◽  
Deposited Metal ◽  
Microwave Applications ◽  
Free Interfaces ◽  
Potential Use

The properties of metal/semiconductor interfaces have received considerable attention over the past few years, and the Al/GaAs system is of special interest because of its potential use in high-speed logic integrated optics, and microwave applications. For such materials a detailed knowledge of the geometric and electronic structure of the interface is fundamental to an understanding of the electrical properties of the contact. It is well known that the properties of Schottky contacts are established within a few atomic layers of the deposited metal. Therefore surface contamination can play a significant role. A method for fabricating contamination-free interfaces is absolutely necessary for reproducible properties, and molecularbeam epitaxy (MBE) offers such advantages for in-situ metal deposition under UHV conditions

Analytical Electron Microscopy of Ion-Implanted Metals

1985 ◽  
Vol 43 ◽  
pp. 282-285
Author(s):  
D.I. Potter ◽  
M. Ahmed ◽  
K. Ruffing
Keyword(s):  
Electron Microscopy ◽  
Ion Implantation ◽  
Friction And Wear ◽  
Analytical Electron Microscopy ◽  
Chemical Compositions ◽  
Surface Chemical ◽  
Near Surface ◽  
The Past ◽  
Analytical Electron ◽  
Property Changes

Ion implantation, used extensively for the past decade in fabricating semiconductor devices, now provides a unique means for altering the near-surface chemical compositions and microstructures of metals. These alterations often significantly improve physical properties that depend on the surface of the material; for example, catalysis, corrosion, oxidation, hardness, friction and wear. Frequently the mechanisms causing these beneficial alterations and property changes remain obscure and much of the current research in the area of ion implantation metallurgy is aimed at identifying such mechanisms. Investigators thus confront two immediate questions: To what extent is the chemical composition changed by implantation? What is the resulting microstructure? These two questions can be investigated very fruitfully with analytical electron microscopy (AEM), as described below.

Sign in / Sign up

Export Citation Format

Share Document