scholarly journals Detection the Degradation of PS Thin Films Containing Triazole Complexes by FTIR Techniques

2018 ◽  
Vol 3 (1) ◽  
pp. 53-57
Author(s):  
Raghad Haddad ◽  
Dina S. Ahmed ◽  
Wedad H. Al-Dahhan ◽  
Ahmed Ahmed ◽  
Salam Mohammed ◽  
...  
Keyword(s):  
Thin Films ◽  
Ftir Spectroscopy ◽  
Infrared Spectra ◽  
Room Temperature ◽  
Uv Light ◽  
Polymeric Films ◽  
Casting Method

4-amino-5-(pyridyl)-4H-1,2,4-triazole-3-thiol (X) with Ni2+, Cu2+, Zn2+, Cd2+ and Sn2+ has been synthesized also used as PS photostabilizers. In chloroform solvent, these complexes mixed with PS to form modified PS, which involving (0.5 % wt) of complexes were prepared using casting method. At room temperature the intensity of light (6.02×10-9 Ein Dm-3 S-1) and wavelength 365 nm with utilized to irradiate polymeric films. PS films irradiation with UV light led to obvious changes in infrared spectra. The photostabilization activity of these polymeric films was investigated by observation the indices using FTIR spectroscopy.

scholarly journals Monitoring the Photodegradation of PVC Thin Films Containing Schiff Base Using FTIR Spectroscopy

2019 ◽  
Vol 4 (1) ◽  
pp. 12-17
Author(s):  
Ali Hassan ◽  
Dina S. Ahmed ◽  
Riyadh Noaman ◽  
Emad Yousif
Keyword(s):  
Thin Films ◽  
Schiff Base ◽  
Light Intensity ◽  
Metal Complexes ◽  
Ftir Spectroscopy ◽  
Uv Irradiation ◽  
Infrared Spectra ◽  
Uv Light ◽  
Base Derivative

Metal complexes of Cu(II), Cd(II), Zn(II), Ni(II) and Sn(II) containing Schiff base derivative (L) as a ligand (ML2) utilized as additives to avoid PVC films photodegradation during UV irradiation (λmax= 313 at a light intensity = 7.75 × 10-7 einstein dm-3 sec-1). Irradiation of PVC films with UV light due to changes in infrared spectra.

scholarly journals Fast Fabrication of Nanostructured Films Using Nanocolloid Lithography and UV Soft Mold Roller Embossing: Effects of Processing Parameters

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 405
Author(s):  
Demei Lee ◽  
Ya-Ling Tang ◽  
Shih-Jung Liu
Keyword(s):  
Uv Light ◽  
Processing Parameters ◽  
Polymeric Films ◽  
Step Motor ◽  
Silicon Substrates ◽  
Casting Method ◽  
Uv Curable ◽  
Soft Mold ◽  
Uv Curable Resin ◽  
Spin Coater

We report the fabrication of nanofeatured polymeric films using nanosphere lithography and ultraviolet (UV) soft-mold roller embossing and show an illuminative example of their application to solar cells. To prepare the nanofeatured template, polystyrene nanocolloids of two distinct sizes (900 and 300 nm) were overlaid on silicon substrates using a spin coater. A lab-made soft-mold roller embossing device equipped with a UV light source was adopted. A casting method was employed to replicate the nanofeatured template onto polydimethylsiloxane, which was used as the soft mold. During the embossing procedure, the roller was driven by a step motor and compressed the UV-curable resin against the glass substrate to form the nanofeatured layer, which was subsequently cured by UV radiation. Polymer films with nanoscaled features were thus obtained. The influence of distinct processing variables on the reproducibility of the nanofeatured films was explored. The empirical outcomes demonstrate that UV soft-mold roller embossing offers a simple yet potent way of producing nanofeatured films.

scholarly journals Active Biopolymeric Films Inoculated with Bdellovibrio bacteriovorus, a Predatory Bacterium

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 605
Author(s):  
Christian Mariel Sáenz-Santos ◽  
Omotayo Opemipo Oyedara ◽  
Yunia Verónica García-Tejeda ◽  
Claudia A. Romero-Bastida ◽  
Esperanza Milagros García-Oropesa ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Escherichia Coli ◽  
Ftir Spectroscopy ◽  
Sodium Alginate ◽  
Polymeric Films ◽  
Casting Method ◽  
Scanning Calorimetry ◽  
Bdellovibrio Bacteriovorus ◽  
Tapioca Starch ◽  
Scanning Electron

The objective of the present work was to evaluate novel active films made with biopolymeric matrices as carriers of a living Bdellovibrio bacteriovorus HD100 strain, a predatory bacterium with antimicrobial potentials against pathogens. Biopolymer films were prepared by a casting method using the following mixtures: collagen/sodium alginate/sorbitol (CA-S), collagen/sodium alginate/glycerol (CA-G), and tapioca starch/sodium alginate/glycerol (StA-G). The effects of the film formulations on the viability of the B. bacteriovorus was investigated by using Fourier Transform Infrared (FTIR) spectroscopy, Differential Scanning Calorimetry (DSC), and Scanning Electron Microscopy (SEM). SEM showed that Bdellovibrio bacteriovorus morphology was not altered in the polymeric films. FTIR spectroscopy provided information about the structural composition of the films. CA-S showed less reduction in the viability of B. bacteriovorus after its entrapment; thus, CA-S proved to be a better agent for the immobilization and preservation of B. bacteriovorus to enhance its predatory activities during application against Escherichia coli.

Transmission infrared study of acid-catalyzed sol-gel silica coatings during room ambient drying

1992 ◽  
Vol 7 (8) ◽  
pp. 2230-2239 ◽  
Author(s):  
T.M. Parrill
Keyword(s):  
Thin Films ◽  
Fourier Transform ◽  
Infrared Spectra ◽  
Spin Coating ◽  
Room Temperature ◽  
Sol Gel ◽  
Infrared Study ◽  
Silica Coatings ◽  
Acidic Conditions ◽  
Acid Catalyzed

Sol-gel solutions prepared from tetraethylorthosilicate (TEOS) hydrolyzed in acidic conditions were used to make thin films on Si wafers via spin coating. Solutions with H2O/TEOS ratios of 2, 5, and 10 were prepared and aged at room temperature in sealed containers for times ranging from <2.5 h to 1 month. Transmission Fourier transform infrared spectra acquired around 1 min after spinning showed peaks characteristic of both SiO2 and SiOH. Additional features at ≍580, 1093, and 1130 cm−1 were observed and possible origins are discussed. Peaks at ≍580 and 1130 cm−1, which increased in intensity with solution age time, are attributed to cyclic Si–O, e.g., 4-member rings. When films were exposed to room air, ring concentration decreased significantly within 30 min. Rings were stable for hours, however, when films were kept in N2. The feature at 1093 cm−1, most sensitive to H2O/TEOS, is attributed to residual Si–O–C.

scholarly journals UV-LED Photo-Activated Room Temperature NO2 Sensors Based on Nanostructured ZnO/AlN Thin Films

Proceedings ◽  
2019 ◽  
Vol 2 (13) ◽  
pp. 888 ◽  
Author(s):  
Tony Granz ◽  
Marius Temming ◽  
Jiushuai Xu ◽  
Qomaruddin ◽  
Cristian Fabrega ◽  
...  
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Gas Sensing ◽  
Uv Light ◽  
Volume Ratio ◽  
Si Substrate ◽  
Strong Reduction ◽  
Light Emitting ◽  
Uv Led ◽  
Increased Sensitivity

UV-light emitting diodes (395–278 nm) were used to investigate the gas sensing attributes of planar and nanostructured ZnO/AlN thin films on Si substrate towards NO2 at room temperature. A significant increased sensitivity ((Rg − Ra)/Ra = 65.3 ppm NO2 in air) and a strong reduction in recovery time (Trec = 14 min) were already observed for the planar ZnO/AlN thin films under UV-B (305 nm) irradiation compared to the other UV wavelengths, while the device showed no obvious response in dark. By enlarging the surface-to-volume ratio of the sensors (i.e., creating nanostructured ZnO/AlN thin films), an increased response time is expected to be observed.

Studies on Water in the Hydration Chamber of a Modified Electron Microscope

1970 ◽  
Vol 28 ◽  
pp. 544-545
Author(s):  
R. C. Moretz ◽  
G. G. Hausner ◽  
D. F. Parsons
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Electron Microscope ◽  
Steady State ◽  
Room Temperature ◽  
Small Mass ◽  
Equilibrium Pressure ◽  
Biological Objects ◽  
Mechanical Pump ◽  
Differential Pumping

Use of the electron microscope to examine wet objects is possible due to the small mass thickness of the equilibrium pressure of water vapor at room temperature. Previous attempts to examine hydrated biological objects and water itself used a chamber consisting of two small apertures sealed by two thin films. Extensive work in our laboratory showed that such films have an 80% failure rate when wet. Using the principle of differential pumping of the microscope column, we can use open apertures in place of thin film windows.Fig. 1 shows the modified Siemens la specimen chamber with the connections to the water supply and the auxiliary pumping station. A mechanical pump is connected to the vapor supply via a 100μ aperture to maintain steady-state conditions.

Interactions Between Al and Cr Thin Films

1976 ◽  
Vol 34 ◽  
pp. 638-639
Author(s):  
R. M. Anderson ◽  
T. M. Reith ◽  
M. J. Sullivan ◽  
E. K. Brandis
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Vacuum System ◽  
Processing Temperature ◽  
Diffusion Couples ◽  
Electronic Circuits ◽  
Intermetallic Formation ◽  
Si Substrates ◽  
Aluminum Silicon

Thin films of aluminum or aluminum-silicon can be used in conjunction with thin films of chromium in integrated electronic circuits. For some applications, these films exhibit undesirable reactions; in particular, intermetallic formation below 500 C must be inhibited or prevented. The Al films, being the principal current carriers in interconnective metal applications, are usually much thicker than the Cr; so one might expect Al-rich intermetallics to form when the processing temperature goes out of control. Unfortunately, the JCPDS and the literature do not contain enough data on the Al-rich phases CrAl7 and Cr2Al11, and the determination of these data was a secondary aim of this work.To define a matrix of Cr-Al diffusion couples, Cr-Al films were deposited with two sets of variables: Al or Al-Si, and broken vacuum or single pumpdown. All films were deposited on 2-1/4-inch thermally oxidized Si substrates. A 500-Å layer of Cr was deposited at 120 Å/min on substrates at room temperature, in a vacuum system that had been pumped to 2 x 10-6 Torr. Then, with or without vacuum break, a 1000-Å layer of Al or Al-Si was deposited at 35 Å/s, with the substrates still at room temperature.

Investigation of ultra-thin films of YBa2Cu3O7−δ grown on MgO

1990 ◽  
Vol 48 (4) ◽  
pp. 6-7
Author(s):  
S.K. Streiffer ◽  
C.B. Eom ◽  
J.C. Bravman ◽  
T.H. Geballet
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Deposition Process ◽  
Nucleation And Growth ◽  
Multilayer Structures ◽  
Rf Power ◽  
Oxygen Loss ◽  
Transmission Electron ◽  
Single Target ◽  
Mtorr Argon

The study of very thin (<15 nm) YBa2Cu3O7−δ (YBCO) films is necessary both for investigating the nucleation and growth of films of this material and for achieving a better understanding of multilayer structures incorporating such thin YBCO regions. We have used transmission electron microscopy to examine ultra-thin films grown on MgO substrates by single-target, off-axis magnetron sputtering; details of the deposition process have been reported elsewhere. Briefly, polished MgO substrates were attached to a block placed at 90° to the sputtering target and heated to 650 °C. The sputtering was performed in 10 mtorr oxygen and 40 mtorr argon with an rf power of 125 watts. After deposition, the chamber was vented to 500 torr oxygen and allowed to cool to room temperature. Because of YBCO’s susceptibility to environmental degradation and oxygen loss, the technique of Xi, et al. was followed and a protective overlayer of amorphous YBCO was deposited on the just-grown films.

TEM sample preparation of wear-tested room-temperature pulsed-laser-deposited thin films of MoS2 by ultramicrotomy

1993 ◽  
Vol 51 ◽  
pp. 1118-1119
Author(s):  
Pamela F. Lloyd ◽  
Scott D. Walck
Keyword(s):  
Thin Films ◽  
Sample Preparation ◽  
Room Temperature ◽  
High Vacuum ◽  
Pulsed Laser ◽  
Ultra High Vacuum ◽  
Wear Testing ◽  
Preparation Technique ◽  
Cross Sectional ◽  
Aerospace Applications

Pulsed laser deposition (PLD) is a novel technique for the deposition of tribological thin films. MoS2 is the archetypical solid lubricant material for aerospace applications. It provides a low coefficient of friction from cryogenic temperatures to about 350°C and can be used in ultra high vacuum environments. The TEM is ideally suited for studying the microstructural and tribo-chemical changes that occur during wear. The normal cross sectional TEM sample preparation method does not work well because the material’s lubricity causes the sandwich to separate. Walck et al. deposited MoS2 through a mesh mask which gave suitable results for as-deposited films, but the discontinuous nature of the film is unsuitable for wear-testing. To investigate wear-tested, room temperature (RT) PLD MoS2 films, the sample preparation technique of Heuer and Howitt was adapted.Two 300 run thick films were deposited on single crystal NaCl substrates. One was wear-tested on a ball-on-disk tribometer using a 30 gm load at 150 rpm for one minute, and subsequently coated with a heavy layer of evaporated gold.

Interface motion during recrystallization of amorphous NiSi2

1990 ◽  
Vol 48 (4) ◽  
pp. 524-525
Author(s):  
J. L. Batstone ◽  
D.A. Smith
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Amorphous Film ◽  
Nucleation And Growth ◽  
Recrystallization Process ◽  
Amorphous Films ◽  
Interface Motion ◽  
Si Substrates ◽  
Spherical Caps ◽  
Crystal Interfaces

Recrystallization of amorphous NiSi2 involves nucleation and growth processes which can be studied dynamically in the electron microscope. Previous studies have shown thatCoSi2 recrystallises by nucleating spherical caps which then grow with a constant radial velocity. Coalescence results in the formation of hyperbolic grain boundaries. Nucleation of the isostructural NiSi2 results in small, approximately round grains with very rough amorphous/crystal interfaces. In this paper we show that the morphology of the rccrystallizcd film is dramatically affected by variations in the stoichiometry of the amorphous film.Thin films of NiSi2 were prepared by c-bcam deposition of Ni and Si onto Si3N4, windows supported by Si substrates at room temperature. The base pressure prior to deposition was 6 × 107 torr. In order to investigate the effect of stoichiomctry on the recrystallization process, the Ni/Si ratio was varied in the range NiSi1.8-2.4. The composition of the amorphous films was determined by Rutherford Backscattering.

Sign in / Sign up

Export Citation Format

Share Document