scholarly journals Tapioca Waste-Methyl Methacrylate Irradiation for Biodegradable Plastic Raw Materials

2020 ◽  
Vol 21 (2) ◽  
pp. 74-80
Author(s):  
Akhmad Rasyid Syahputra ◽  
Tita Puspitasari ◽  
Santoso Prayitno ◽  
Ade Lestari Yunus
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Methyl Methacrylate ◽  
Raw Materials ◽  
Absorbed Dose ◽  
Biodegradable Plastic ◽  
Mechanical And Thermal Properties ◽  
Polymer Reaction ◽  
Gel Fraction ◽  
Dog Bone

Nuclear technology can be applied not only as an energy (electricity) but also in industry as as an initiator on polymer reaction. Tapioca waste is used due to its biodegradability properties. Tapioca waste gel is formed by adding equal aquades ratio to waste weight. After gel formed, several concentrations of methyl methacrylate (w/w) is added to the gel then packed into 150 mL ampule. Using Co-60 gamma irradiation source, gel is irradiated at 5 kGy absorbed dose. Gel is extracted using acetone to get rid of sample from impurities. Glycerol as a plasticizer is added to the gel to increase polymer flexibility. Gel-Glycerol mixing is done at 60ºC, 250 rpm for one hour by adding aquadest. To analyze mechanical properties, firstly, we need to mold samples using pressurized-hot press machine. Film is formed to type 5 specimen (dog bone, astm d638-14). Specimen is tested by analyzing tensile strength characteristics. Fabrication of biodegradable plastic based packaging by using starch has an increasement of mechanical and thermal properties at 5 kGy absorbed dose. Methyl methacrylate 25, 50, 75, 100, 125 and 150% addition to the solution has 10-24 MPa tensile strength. Gel fraction has range between 88-100%. Even the lowest ratio of monomer addition can provide highest gel fraction to improve mechanical properties of tapioca waste. 

Thermoplastic polyurethane/CNT nanocomposites with low electromagnetic resistance property

2021 ◽  
pp. 002199832110370
Author(s):  
Chia-Fang Lee ◽  
Chin-Wen Chen ◽  
Fu-Sheng Chuang ◽  
Syang-Peng Rwei
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermoplastic Polyurethane ◽  
Conductive Polymer ◽  
Resistance Coefficient ◽  
Equal Weight ◽  
Mechanical And Thermal Properties ◽  
Multi Wall Carbon Nanotubes ◽  
Twin Screw ◽  
Acrylic Ester

Multi-wall carbon nanotubes (MWCNTs) at 0.5 wt% to 2 wt% proportions were added to thermoplastic polyurethane (TPU) synthesized with polycarbonatediol (PCDL), 4,4’-methylene diphenyl diisocyanate (MDI), and 1,3-butanediol(1,3-BDO). To formulate a new TPU-MWCNT nanocomposite, the composite was melt-blended with a twin-screw extruder. To ensure the even dispersion of MWCNTs, dispersant (ethylene acrylic ester terpolymer; Lotader AX8900) of equal weight proportion to the added MWCNTs was also added during the blending process. Studies on the mechanical and thermal properties, and melt flow experiments and phase analysis of TPU-MWCNT nanocomposites, these nanocomposites exhibit higher tensile strength and elongation at break than neat TPU. TPU-MWCNT nanocomposites with higher MWCNT content possess higher glass-transition temperature (Tg), a lower melt index, and greater hardness. Relative to neat TPU, TPU-MWCNT nanocomposites exhibit favorable mechanical properties. By adding MWCNTs, the tensile strength of the nanocomposites increased from 7.59 MPa to 21.52 MPa, and Shore A hardness increased from 65 to 81. Additionally, TPU-MWCNT nanocomposites with MWCNTs had lower resistance coefficients; the resistance coefficient decreased from 4.97 × 1011 Ω/sq to 2.53 × 104 Ω/sq after adding MWCNTs, indicating a conductive polymer material. Finally, the internal structure of the TPU-MWCNT nanocomposites was examined under transmission electron microscopy. When 1.5 wt% or 2 wt% of MWCNTs and dispersant were added to TPU, the MWCNTs were evenly dispersed, with increased electrical conductivity and mechanical properties. The new material is applicable in the electronics industry as a conductive polymer with high stiffness.

scholarly journals Tension mechanical properties of recycled glass-epoxy composite material

2012 ◽  
pp. 189-198 ◽  
Author(s):  
Jelena Petrovic ◽  
Darko Ljubic ◽  
Marina Stamenovic ◽  
Ivana Dimic ◽  
Slavisa Putic
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Composite Material ◽  
Composite Materials ◽  
Modulus Of Elasticity ◽  
Epoxy Composite ◽  
Raw Materials ◽  
Mechanical Tests ◽  
Recycled Glass ◽  
Before And After

The significance of composite materials and their applications are mainly due to their good properties. This imposes the need for their recycling, thus extending their lifetime. Once used composite material will be disposed as a waste at the end of it service life. After recycling, this kind of waste can be used as raw materials for the production of same material, which raises their applicability. This indicates a great importance of recycling as a method of the renowal of composite materials. This study represents a contribution to the field of mechanical properties of the recycled composite materials. The tension mechanical properties (tensile strength and modulus of elasticity) of once used and disposed glass-epoxy composite material were compared before and after the recycling. The obtained results from mechanical tests confirmed that the applied recycling method was suitable for glass-epoxy composite materials. In respect to the tensile strength and modulus of elasticity it can be further assessed the possibility of use of recycled glass-epoxy composite materials.

scholarly journals Effective reinforcements for thermoplastics based on carbon nanotubes of oil fly ash

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Numan Salah ◽  
Abdulrahman Muhammad Alfawzan ◽  
Abdu Saeed ◽  
Ahmed Alshahrie ◽  
Waleed Allafi
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Tensile Strength ◽  
Fly Ash ◽  
Young’S Modulus ◽  
Raw Materials ◽  
Young's Modulus ◽  
Weight Fraction ◽  
Low Weight ◽  
Oil Fly Ash

AbstractCarbon nanotubes (CNTs) are widely investigated for preparing polymer nanocomposites, owing to their unique mechanical properties. However, dispersing CNTs uniformly in a polymer matrix and controlling their entanglement/agglomeration are still big technical challenges to be overcome. The costs of their raw materials and production are also still high. In this work, we propose the use of CNTs grown on oil fly ash to solve these issues. The CNTs of oil fly ash were evaluated as reinforcing materials for some common thermoplastics. High-density polyethylene (HDPE) was mainly reinforced with various weight fractions of CNTs. Xylene was used as a solvent to dissolve HDPE and to uniformly disperse the CNTs. Significantly enhanced mechanical properties of HDPE reinforced at a low weight fraction of these CNTs (1–2 wt.%), mainly the tensile strength, Young’s modulus, stiffness, and hardness, were observed. The tensile strength and Young’s modulus were enhanced by ~20 and 38%, respectively. Moreover, the nanoindentation results were found to be in support to these findings. Polycarbonate, polypropylene, and polystyrene were also preliminarily evaluated after reinforcement with 1 wt.% CNTs. The tensile strength and Young’s Modulus were increased after reinforcement with CNTs. These results demonstrate that the CNTs of the solid waste, oil fly ash, might serve as an appropriate reinforcing material for different thermoplastics polymers.

Experimental investigation, modeling and optimization study on the mechanical properties of B4Cp/MWCNT/epoxy multi-scale hybrid composite

2020 ◽  
pp. 096739112097118
Author(s):  
Mustafa Taşyürek
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Process Parameters ◽  
Hybrid Composite ◽  
Optimization Method ◽  
High Rate ◽  
Dominant Factor ◽  
Mechanical And Thermal Properties ◽  
Multi Scale ◽  
The Matrix

In this study, process parameters and mechanical properties of the multi-scale composite were investigated experimentally and predictably. Multi-scale material includes boron carbide particles and multi walled carbon nanotubes (MWCNTs) in the epoxy-based matrix. Both reinforcements were reinforced into the matrix with various rates simultaneously. Average three tensile strength and hardness values were determined. The tensile strength and hardness were enhanced thanks to high rate of B4C usage up to 54.09% and 2.54%, respectively. The microstructure of the hybrid composite was investigated by Scanning Electron Microscopy. Also, Fourier Transform Infrared Spectroscopy was used to interpret spectral bands. The experimental data were analyzed using optimization method. Optimal process parameters for tensile strength and interfacial properties were determined. The Analysis of Variance (ANOVA) was used to obtain most significant factor and optimum levels of parameters. Finally, it was observed that B4C ratio is the most dominant factor affecting the mechanical and thermal properties.

Effect of Compatibilizer and Flexibilizer on the Mechanical Properties of Acrylonitrile-Butadiene-Styrene)/Poly(Methyl Methacrylate) Blends

2014 ◽  
Vol 496-500 ◽  
pp. 317-321
Author(s):  
Shou Hai Wang ◽  
Jun Gao ◽  
Gu Ren Fei ◽  
Ping Zhang ◽  
Jun Huang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Maleic Anhydride ◽  
Methyl Methacrylate ◽  
Acrylonitrile Butadiene Styrene ◽  
Screw Extruder ◽  
Polyolefin Elastomer ◽  
Twin Screw ◽  
Orthogonal Tests ◽  
Butadiene Styrene

Acrylonitrile-butadiene-styrene (ABS) / polymethyl methacrylate (PMMA) with the addition of maleic anhydride grafted polystyrene (KT-5) and polyolefin elastomer (POE) were melt processed in a co-rotating twin-screw extruder. The effect of KT-5 and POE content on the mechanical properties of ABS/PMMA was investigated. Experiment results indicate that KT-5 can improve the tensile strength and the composites are toughened effectively as the addition of POE. According to Orthogonal tests, it demonstrates that POE ha a greater effect on the blends than KT-5, and there exist no obvious interactivity between the two components.

Use of Cellulose-Containing Fillers in Composites with Polypropylene

1970 ◽  
Vol 17 (2) ◽  
pp. 150-154
Author(s):  
Marianna LAKA ◽  
Svetlana CHERNYAVSKAYA ◽  
Galia SHULGA ◽  
Viktor SHAPOVALOV ◽  
Andrej VALENKOV ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Shear Modulus ◽  
Rapeseed Oil ◽  
Water Retention ◽  
Raw Materials ◽  
Water Retention Value ◽  
Water Vapour Sorption ◽  
Recycled Polypropylene ◽  
Sulphate Pulp

The composites, containing recycled polypropylene and fillers, obtained from different lignocellulosics by the thermocatalytic destruction method, were investigated. Birch sawdust, newsprint wastes, cotton residues and wood bleached sulphate pulp were used as raw materials for obtaining fillers. The indices of mechanical properties (tensile strength, modulus of elasticity, deformation at break, shear modulus, toughness, twisting moment) of the composites' samples were determined. It has been found that the obtained composites have relatively good mechanical properties. Better results were obtained, using fillers from sawdust and wood pulp. After treating the fillers with rapeseed oil, their water vapour sorption and water retention value (WRV) decreased. In this case, the strength of the composites was higher.http://dx.doi.org/10.5755/j01.ms.17.2.484

scholarly journals Structural and Thermo-Mechanical Properties of Poly(ε-caprolactone) Modified by Various Peroxide Initiators

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1101 ◽  
Author(s):  
Przybysz ◽  
Hejna ◽  
Haponiuk ◽  
Formela
Keyword(s):  
Mechanical Properties ◽  
Differential Scanning Calorimetry ◽  
Cross Linking ◽  
Mechanical And Thermal Properties ◽  
Dicumyl Peroxide ◽  
Organic Peroxides ◽  
Reactive Processing ◽  
Scanning Calorimetry ◽  
Melting Temperatures ◽  
Gel Fraction

The modification of poly(ε-caprolactone) (PCL) was successfully conducted during reactive processing in the presence of dicumyl peroxide (DCP) or di-(2-tert-butyl-peroxyisopropyl)-benzene (BIB). The peroxide initiators were applied in the various amounts of 0.5 or 1.0 pbw (part by weight) into the PCL matrix. The effects of the initiator type and its concentration on the structure and mechanical and thermal properties of PCL were investigated. To achieve a detailed and proper explication of this phenomenon, the decomposition and melting temperatures of DCP and BIB initiators were measured by differential scanning calorimetry. The conjecture of the branching or cross-linking of PCL structure via used peroxides was studied by gel fraction content measurement. Modification in the presence of BIB in PCL was found to effectively increase gel fraction. The result showed that the cross-linking of PCL started at a low content of BIB, while PCL modified by high DCP content was only partially cross-linked or branched. PCL branching and cross-linking were found to have a significant impact on the mechanical properties of PCL. However, the effect of used initiators on poly(ε-caprolactone) properties strongly depended on their structure and content. The obtained results indicated that, for the modification towards cross-linking/branching of PCL structure by using organic peroxides, the best mechanical properties were achieved for PCL modified by 0.5 pbw BIB or 1.0 pbw DCP, while the PCL modified by 1.0 pbw BIB possessed poor mechanical properties, as it was related to over cross-linking.

MECHANICAL AND THERMAL PROPERTIES OF SAWDUST CONCRETE

2017 ◽  
Vol 79 (6) ◽  
Author(s):  
Ruhal Pervez Memon ◽  
Abdul Rahman Mohd. Sam ◽  
A. S. M. Abdul Awal ◽  
Lemar Achekzai
Keyword(s):  
Heat Transfer ◽  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Lightweight Concrete ◽  
Physical And Mechanical Properties ◽  
Developing Nations ◽  
Mechanical And Thermal Properties ◽  
Construction Technology ◽  
Long Duration

 Industrialization in developing countries has resulted in an increase in agricultural output and consequent accumulation of unmanageable agro wastes. Pollution arising from such wastes is a matter of concern for many developing nations. The aim of this study is to investigate the behavior of lightweight concrete and the utilization of sawdust as waste material in concrete. This paper focuses on the manufacturing of concrete which possess long duration heat transfer by using sawdust waste. In this research, cement to sawdust ratio of 1:1, 1:2 and 1:3 by volume was prepared for sawdust concrete, and the ratio of sand was kept constant that is 1. At these ratios, the mechanical and thermal properties like density, workability, strength and heat transfer were measured after, 7, 28 and 56 days of air curing. The tests results show that with the increase in the amount of sawdust, the workability, compressive strength, tensile strength and flexural strength decreased. It also resulted in reduction of heat transfer of sawdust concrete. Taking into account the overall physical and mechanical properties, sawdust concrete can be used in construction technology. 

Effect of chain extender on the mechanical and thermal resistance properties of polyurethane liners for composite propellants

Polyurethanes ◽  
2016 ◽  
Vol 1 (1) ◽  
Author(s):  
P. Ross ◽  
G. Sevilla ◽  
J. Quagliano
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Chain Extender ◽  
Molecular Structures ◽  
Polymer Chains ◽  
Mechanical And Thermal Properties ◽  
Thermal Changes ◽  
Ft Ir ◽  
Chain Lengths

AbstractPolyurethane formulations utilized as liners for composite propellants were prepared by the reaction of toluene-2,4-diisocyanate (TDI) and isophorone diisocyanate (IPDI) with hydroxyl terminated polybutadiene (HTPB), while polymer chains were further extended with neopentyl glycol diol, NPG triol and two different triols (monoglyceryl ricinoleate, MRG and trimethylolpropane, TMP). Liners were formulated with micronized titanium dioxide mechanically dispersed in hydroxyl-terminated polybutadiene (HTPB). The molecular structures of liners were confirmed by FT-IR. Thermal properties indicated that the nature of chain extender (crosslinker) only slightly affected the temperatures for decomposition of liners. Two main thermal changes were found at 370∘C and another at around 440–500∘C, depending on the chain extender utilized. On the other side, mechanical properties varied within the range of 0,7-1,8 MPa, consistent with this kind of elastomers. Tensile strength at break was only significantly affected with TMP and MRG-chain extended liners at the lowest concentrations tested of 1,3 and 2% (w/w), respectively. However, the behaviour depended on whether TDI or IPDI isocyanate was utilized for curing. TMP 1,3% crosslinked liner cured with TDI had a tensile strength of 1,82MPa whileMRG-crosslinked liner cured with IPDI had a tensile strength of 1,56 MPa. It was observed that at the higher NCO/OH ratios essayed, tensile strength and hardness increased, improving mechanical properties. Our results confirmed that TMP and MRG triols together with NPG diols can be used to tailor mechanical and thermal properties of liners, considering their different hydroxyl functionalities and chain lengths.

Research on Miniature Thermoplastic Processing of Polyvinyl Alcohol Based Nanocomposites

2013 ◽  
Vol 380-384 ◽  
pp. 4224-4227
Author(s):  
Ming Fang Xie ◽  
Sheng Qiang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Polyvinyl Alcohol ◽  
Raw Materials ◽  
Great Influence ◽  
Theoretical Method ◽  
Process Conditions ◽  
Processing Conditions ◽  
Elongation At Break ◽  
Preparation Conditions

This paper discusses the synthesis and preparation of polyvinyl alcohol based nanocomposites through the use of miniature thermoplastics processing technology. It studies the influence of different process conditions, the amount of raw materials and water on the processing performance, tensile strength and elongation at break of polyvinyl alcohol based nanocomposites. Studies have shown that using two miniature thermoplastic processes does not have much influence on the mechanical properties of polyvinyl alcohol based nanocomposites, different amount of polyvinyl alcohol will lead to enhancement of the tensile strength of the polyvinyl alcohol based nanocomposites system by the increasing amount of glycerin, and the water content has a great influence on the performance of polyvinyl alcohol based nanocomposites. To this end, according to the analysis of experimental results, it can obtain preparation conditions and influencing factors of polyvinyl alcohol based nanocomposites with the miniature thermoplastic processing conditions, and provide a new theoretical method and means for nanocomposites.

Sign in / Sign up

Export Citation Format

Share Document