Covalent grafting of graphene oxide on functionalized macroporous silicon

2018 ◽  
Vol 4 (1) ◽  
pp. 15-22 ◽  
Author(s):  
Rosalba Moretta ◽  
Monica Terracciano ◽  
Principia Dardano ◽  
Maurizio Casalino ◽  
Ilaria Rea ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Hybrid Structure ◽  
Optical Methods ◽  
Single Atom ◽  
Macroporous Silicon ◽  
Label Free ◽  
Water Contact ◽  
Force Microscopy ◽  
Atomic Force ◽  
Covalent Grafting

Abstract Graphene oxide (GO) is a single-atom-thick and two-dimensional carbon material that has attracted great attention because of its remarkable electronic, mechanical, chemical and thermal properties. GO could be an ideal substrate for the development of label-free optical biosensors, however, its weak photoluminescence (PL) strongly limits the use for this purpose. In this study, we developed a covalent chemical strategy in order to obtain a hybrid GO-macroporous silicon (PSi) structure for biomedical applications. The realized structure was characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM)water contact angle (WCA) measurements, Fourier transform infrared spectroscopy (FTIR) and label- free optical methods based on spectroscopic reflectometry and PL analysis. Investigations showed that the hybrid structure is suitable as a transducer material for biosensing applications due to its peculiar optical properties resulting from the combination of GO and PSi.

scholarly journals Photocatalytic reduction of graphene oxide with cuprous oxide film under UV-vis irradiation

2020 ◽  
Vol 59 (1) ◽  
pp. 207-214 ◽  
Author(s):  
Yao Wang ◽  
Jianqing Feng ◽  
Lihua Jin ◽  
Chengshan Li
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Low Cost ◽  
Photocatalytic Reduction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Reduced Graphene ◽  
Reduction Efficiency ◽  
Metal Organic ◽  
Reduction Effect

AbstractWe have grown Cu2O films by different routes including self-oxidation and metal-organic deposition (MOD). The reduction efficiency of Cu2O films on graphene oxide (GO) synthesized by modified Hummer’s method has been studied. Surface morphology and chemical state of as-prepared Cu2O film and GO sheets reduced at different conditions have also been investigated using atomic force microscopy (AFM) and x-ray photoelectron spectroscopy (XPS). Results show that self-oxidation Cu2O film is more effective on phtocatalytic reduction of GO than MOD-Cu2O film. Moreover, reduction effect of self-oxidation Cu2O film to GO is comparable to that of environmental-friendly reducing agent of vitamin C. The present results offer a potentially eco-friendly and low-cost approach for the manufacture of reduced graphene oxide (RGO) by photocatalytic reduction.

scholarly journals 3D phonon microscopy with sub-micron axial-resolution

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Richard J. Smith ◽  
Fernando Pérez-Cota ◽  
Leonel Marques ◽  
Matt Clark
Keyword(s):  
Signal To Noise Ratio ◽  
Single Cells ◽  
Optical Resolution ◽  
Acquisition Time ◽  
Label Free ◽  
Axial Resolution ◽  
Force Microscopy ◽  
Atomic Force ◽  
Accuracy And Precision ◽  
Good Agreement

AbstractBrillouin light scattering (BLS) is an emerging method for cell imaging and characterisation. It allows elasticity-related contrast, optical resolution and label-free operation. Phonon microscopy detects BLS from laser generated coherent phonon fields to offer an attractive route for imaging since, at GHz frequencies, the phonon wavelength is sub-optical. Using phonon fields to image single cells is challenging as the signal to noise ratio and acquisition time are often poor. However, recent advances in the instrumentation have enabled imaging of fixed and living cells. This work presents the first experimental characterisation of phonon-based axial resolution provided by the response to a sharp edge. The obtained axial resolution is up to 10 times higher than that of the optical system used to take the measurements. Validation of the results are obtained with various polymer objects, which are in good agreement with those obtained using atomic force microscopy. Edge localisation, and hence profilometry, of a phantom boundary is measured with accuracy and precision of approximately 60 nm and 100 nm respectively. Finally, 3D imaging of fixed cells in culture medium is demonstrated.

Development of leftover rice/gelatin interpenetrating polymer network films for food packaging

2021 ◽  
Vol 10 (1) ◽  
pp. 37-48
Author(s):  
Sijia Li ◽  
Chun Shao ◽  
Zhikun Miao ◽  
Panfang Lu
Keyword(s):  
Food Packaging ◽  
Polymer Network ◽  
Raw Material ◽  
Interpenetrating Polymer Network ◽  
Waste Biomass ◽  
Practical Application ◽  
Water Contact ◽  
Force Microscopy ◽  
Atomic Force ◽  
Morphology Of Films

Abstract Waste biomass can be used as a raw material for food packaging. Different concentrations of gelatin (GEL) were introduced into the leftover rice (LR) system to form an interpenetrating polymer network (IPN) for improving the properties of the films. The structure and morphology of films were evaluated by Fourier transform infrared, scanning electron microscopy, and atomic force microscopy, which showed good compatibility between LR and GEL. The moisture content and oil absorption rate of IPN films were down by 105% and 182%, respectively, which showed better water and oil resistance than the LR film. In addition, increasing GEL concentration led to enhancement in the tensile strength of films from 2.42 to 11.40 MPa. The water contact angle value of the IPN films (117.53°) increased by 147% than the LR film (47.56°). The low haze of IPN films was obtained with the increment of the mutual entanglement of LR and GEL. The 30–50% GEL addition improved the water vapor barrier and thermal stability properties of the IPN films. This study highlights that LR as waste biomass can have a practical application in food packaging.

scholarly journals Synthesis of amphiphilic ABA triblock oligomer via ATRP and its surface properties

2017 ◽  
Vol 95 (5) ◽  
pp. 605-611 ◽  
Author(s):  
Lei Wang ◽  
Shaoqing Wen ◽  
Zhanxiong Li
Keyword(s):  
Photoelectron Spectroscopy ◽  
Microphase Separation ◽  
Gel Permeation Chromatography ◽  
Contact Angles ◽  
Chemical Compositions ◽  
Water Contact ◽  
Force Microscopy ◽  
Atomic Force ◽  
Poly Ethylene ◽  
Magnetic Resonances

A series of novel amphiphilic ABA-type poly(tridecafluorooctylacrylate)-poly(ethylene glycol)-poly(tridecafluorooctylacrylate) (henceforth referred to as p-TDFA-PEG-p-TDFA) triblock oligomers were successfully synthesized via atom transfer radical polymerization (ATRP) using well-defined Br-PEG-Br as macroinitiator and copper as catalyst. The block oligomers were characterized by Fourier transform infrared (FTIR) spectroscopy and 1H and 19F nuclear magnetic resonances (NMR). Gel permeation chromatography (GPC) showed that the block oligomers have been obtained with narrow molecular weight distributions of 1.22–1.33. X-ray photoelectron spectroscopy (XPS) was carried out to confirm the attachment of p-TDFA-PEG-p-TDFA onto the silicon substrate, together with the chemical compositions of p-TDFA-PEG-p-TDFA. The wetabilities of the oligomer films were measured by water contact angles (CAs). Water CAs of p-TDFA-PEG-p-TDFA film were measured and their morphologies were tested by atomic force microscopy (AFM). The result showed that the CAs of the oligomer films, which possess fluoroalkyl groups assembled on the outer surface, increase after heating due to the migration of fluoroalkyl groups and the resulted microphase separation of the p-TDFA-PEG-p-TDFA.

Characterization of X-ray irradiated graphene oxide coatings using X-ray diffraction, X-ray photoelectron spectroscopy, and atomic force microscopy

2013 ◽  
Vol 28 (2) ◽  
pp. 68-71 ◽  
Author(s):  
Thomas N. Blanton ◽  
Debasis Majumdar
Keyword(s):  
Atomic Force Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
High Energy ◽  
X Ray Diffraction ◽  
Carbon Phase ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Before And After

In an effort to study an alternative approach to make graphene from graphene oxide (GO), exposure of GO to high-energy X-ray radiation has been performed. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) have been used to characterize GO before and after irradiation. Results indicate that GO exposed to high-energy radiation is converted to an amorphous carbon phase that is conductive.

scholarly journals Electrodeposition of NiSn-rGO Composite Coatings from Deep Eutectic Solvents and Their Physicochemical Characterization

Metals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1455
Author(s):  
Sabrina Patricia Rosoiu ◽  
Aida Ghiulnare Pantazi ◽  
Aurora Petica ◽  
Anca Cojocaru ◽  
Stefania Costovici ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Electrochemical Impedance ◽  
Composite Coatings ◽  
Choline Chloride ◽  
Physicochemical Characterization ◽  
Metallic Matrix ◽  
Deep Eutectic Solvents ◽  
Force Microscopy ◽  
Atomic Force ◽  
Reduced Graphene

The present work describes, for the first time, the electrodeposition of NiSn alloy/reduced graphene oxide composite coatings (NiSn-rGO) obtained under pulse current electrodeposition conditions from deep eutectic solvents (choline chloride: ethylene glycol eutectic mixtures) containing well-dispersed GO nanosheets. The successful incorporation of the carbon-based material into the metallic matrix has been confirmed by Raman spectroscopy and cross-section scanning electron microscopy (SEM). A decrease in the crystallite size of the coating was evidenced when graphene oxide was added to the electrolyte. Additionally, the topography and the electrical properties of the materials were investigated by atomic force microscopy (AFM). The corrosion behavior in 0.5 M NaCl solution was analyzed through potentiodynamic polarization and electrochemical impedance spectroscopy methods for different immersion periods, up to 336 h, showing a slightly better corrosion performance as compared to pure NiSn alloy.

scholarly journals Superhydrophilic Coating with Antibacterial and Oil-Repellent Properties via NaIO4-Triggered Polydopamine/Sulfobetaine Methacrylate Polymerization

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 2008
Author(s):  
Hsiu-Wen Chien ◽  
Hong-Yu Lin ◽  
Chau-Yi Tsai ◽  
Tai-Yu Chen ◽  
Wei-Nian Chen
Keyword(s):  
Surface Modification ◽  
Photoelectron Spectroscopy ◽  
Deposition Process ◽  
Water Contact ◽  
Water Separation ◽  
Force Microscopy ◽  
Atomic Force ◽  
Oil Water Separation ◽  
One Step ◽  
Oil Repellent

Superhydrophilic coatings have been widely used for the surface modification of membranes or biomedical devices owing to their excellent antifouling properties. However, simplifying the modification processes of such materials remains challenging. In this study, we developed a simple and rapid one-step co-deposition process using an oxidant trigger to fabricate superhydrophilic surfaces based on dopamine chemistry with sulfobetaine methacrylate (SBMA). We studied the effect of different oxidants and SBMA concentrations on surface modification in detail using UV–VIS spectrophotometry, dynamic light scattering, atomic force microscopy, X-ray photoelectron spectroscopy, and surface plasmon resonance. We found that NaIO4 could trigger the rate of polymerization and the optimum ratio of dopamine to SBMA is 1:25 by weight. This makes the surface superhydrophilic (water contact angle < 10°) and antifouling. The superhydrophilic coating, when introduced to polyester membranes, showed great potential for oil/water separation. Our study provides a complete description of the simple and fast preparation of superhydrophilic coatings for surface modification based on mussel-inspired chemistry.

scholarly journals Influence of Oxidation Degree of Graphene Oxide on the Shear Rheology of Poly(ethylene glycol) Suspensions

Fluids ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 41 ◽  
Author(s):  
Yago Soares ◽  
Elyff Cargnin ◽  
Mônica Naccache ◽  
Ricardo Andrade
Keyword(s):  
Graphene Oxide ◽  
Rheological Behavior ◽  
Structural Characteristics ◽  
Rheological Characterization ◽  
Polymeric Liquid ◽  
Oxidation Degree ◽  
Force Microscopy ◽  
Fluid Behavior ◽  
Atomic Force ◽  
Poly Ethylene

This work studies the influence of the concentration and oxidation degree on the rheological behavior of graphene oxide (GO) nanosheets dispersed on polyethylene glycol (PEG). The rheological characterization was fulfilled in shear flow through rotational rheometry measurements, in steady, transient and oscillatory regimes. Graphene oxide was prepared by chemical exfoliation of graphite using the modified Hummers method. The morphological and structural characteristics originating from the synthesis were analyzed by X-ray diffraction, Raman spectroscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, and atomic force microscopy. It is shown that higher oxidation times increase the functional groups, which leads to a higher dispersion and exfoliation of GO sheets in the PEG. Moreover, the addition of GO in a PEG solution results in significant growth of the suspension viscosity, and a change of the fluid behavior from Newtonian to pseudoplastic. This effect is related to the concentration and oxidation level of the obtained GO particles. The results obtained aim to contribute towards the understanding of the interactions between the GO and the polymeric liquid matrix, and their influence on the suspension rheological behavior.

Sign in / Sign up

Export Citation Format

Share Document