scholarly journals A comparative fiber morphological analysis of major agricultural residues (used or investigated) as feedstock in the pulp and paper industry

BioResources ◽  
2021 ◽  
Vol 16 (4) ◽  
pp. 7935-7952
Author(s):  
Dimitrios Tsalagkas ◽  
Zoltán Börcsök ◽  
Zoltán Pásztory ◽  
Vladimir Gryc ◽  
Levente Csóka ◽  
...  
Keyword(s):  
Cell Wall ◽  
Rice Straw ◽  
Sugarcane Bagasse ◽  
Wall Thickness ◽  
Fiber Length ◽  
Slenderness Ratio ◽  
Agricultural Residues ◽  
Lumen Diameter ◽  
Coconut Husk ◽  
Flexibility Coefficient

The suitabilities of major agricultural residues were assessed as papermaking feedstocks. All the examined agricultural residues were assumed as potential candidates for substituting hardwood fibers in mixed pulp blends from a fiber morphological perspective. Wheat, barley, rice, rapeseed, maize, sunflower, sugarcane bagasse, coconut husk, and two genotypes of miscanthus grass underwent identical maceration. The fiber length, fiber width, cell wall thickness, and lumen diameter were measured to calculate the slenderness ratio, flexibility coefficient, and Runkel ratio. The average fiber length ranged from 0.50 mm ± 0.32 mm (MG-S-02-V) to 1.15 mm mm ± 0.58 mm (sugarcane bagasse). The fiber width ranged from 10.77 μm ± 3.28 μm (rice straw) to 22.99 mm ± 5.20 mm (sunflower stalk). The lumen diameter ranged from 4.52 μm ± 2.52 μm (rice straw) to 13.23 μm ± 4.87 μm (sunflower stalk). The cell wall thickness ranged from 3.02 μm ± 0.95 μm (rice straw) to 4.80 μm ± 1.48 μm (sunflower stalk). The slenderness ratio, flexibility coefficient, and Runkel ratio values ranged between 28.08 to 58.11, 37.97 to 60.8, and 0.62 to 1.68, respectively. Wheat, maize, rapeseed, sugarcane bagasse, and coconut husk were found to be appropriate residue sources for papermaking feedstocks.

scholarly journals Evaluation of physical, anatomical, and biometric characteristics of Citrus sinensis trees in longitudinal and transverse axes of stem

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 5696-5709
Author(s):  
Ali Hassanpoor Tichi ◽  
Habibollah Khademieslam ◽  
Mojtaba Rezanezhad Divkolae
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Citrus Sinensis ◽  
Fiber Length ◽  
Fiber Diameter ◽  
Basic Density ◽  
Cell Wall Thickness ◽  
Lumen Diameter ◽  
Dry Density ◽  
Significant Difference

Three healthy Citrus sinensis (orange) trees in Babol, Iran, were randomly selected and cut. Two discs of 5 cm thickness were prepared along the tree (breast height and crown). In the transverse direction, the test specimens were cut 2 × 2 cm to 3 cm from the pith to the bark sequentially and examined. The biometric and physical properties were measured, and microscopic sections of wood near the bark were studied using light microscopy according to the International Association of Wood Anatomists’ (IAWA) List. Anatomical examination of the C. sinensis wood showed that the species was a diffuse porous hardwood, with indistinct growth rings, simple perforation plates, alternate intervessel pits, and banded parenchyma. The basic density and oven-dry density increased from the pith towards the tree bark and from the bottom of the tree towards the crown. There was a significant difference in both the transverse and longitudinal directions of the C. sinensis tree in terms of fiber length, fiber lumen diameter, fiber diameter, and cell wall thickness. The mean fiber length, fiber diameter, fiber lumen diameter, and cell wall thickness were 0.76 mm, 23.64 µm, 9.23 µm, and 14.41 µm, respectively.

Deeper insight into the morphological features of sunflower stalk as Biorefining criteria for sustainable production

2019 ◽  
Vol 34 (3) ◽  
pp. 250-263
Author(s):  
Hassan Mehdikhani ◽  
Hossein Jalali Torshizi ◽  
Mohammad Dahmardeh Ghalehno
Keyword(s):  
Wall Thickness ◽  
Fiber Length ◽  
Agricultural Waste ◽  
Lumen Diameter ◽  
Eucalyptus Species ◽  
Fibrous Materials ◽  
Shape Factors ◽  
Chemical Treatments ◽  
Flexibility Coefficient ◽  
Rigidity Coefficient

Abstract Effective utilization of fibrous materials plays a major role in techno-economic viability of the resources. Sunflower stalk (SS) as one of highest bio-fibrous waste was assessed respect to fiber features in biorefinery approach. The lumen diameter, wall thickness and fiber length were measured as (∼12 µm), (5.25 µm) and (1.58 mm), respectively. The wider lumen diameter makes its suitable for chemical treatments and purification. The applied Pulping conditions decreased the fiber length and wall thickness, with the least reduction by soda-anthraquinone. Derived indices involved rigidity and flexibility coefficients, aspect and Runkel ratios, solid and Luce’s shape factors were also calculated based on the measured values. The aspect ratio (77.5) put SS fibers as very good resources for lignocellulosic products and composites. The flexibility coefficient (57) belongs to the elastic category and was not altered by pulping. The Runkel ratio was lesser than 1 (>0.9) but decreased by the pulping, to some extent. The Luceʼs shape factor was nearly calculated 0.5, near to the bagasse and eucalyptus species. Solid factor (0.17) and rigidity coefficient (0.51) were considered to be good fiber resource. Totally due to the SS fiber characteristics, the agricultural waste suitability for value adding bio-based production could be reported.

Properties of Gliricidia Wood (Gliricidia sepium) lntercropped with Cocoa (Theobroma cocoa) in Malaysia

2014 ◽  
Vol 11 (1) ◽  
pp. 51
Author(s):  
Mohd Helmy Ibrahim ◽  
Mohd Nazip Suratman ◽  
Razali Abd Kader
Keyword(s):  
Cell Wall ◽  
Specific Gravity ◽  
Moisture Content ◽  
Wall Thickness ◽  
Age Groups ◽  
Gliricidia Sepium ◽  
Cell Wall Thickness ◽  
Tree Age ◽  
Lumen Diameter ◽  
Significant Difference

Trees planted from agroforestry practices can become valuable resources in meeting the wood requirements of many nations. Gliricidia sepium is an exotic species introduced to the agricultural sector in Malaysia mainly for providing shade for cocoa and coffee plantations. This study investigates its wood physical properties (specific gravity and moisture content) and fibre morphology (length, lumen diameter and cell wall thickness) of G. sepium at three intervals according to age groups ( three, five and seven years of ages). Specific gravity (0.72) was significantly higher at seven years ofage as compared to five (0.41) and three (0.35) years age group with a mean of 0.43 (p<0.05). Mean moisture content was 58.3% with no significant difference existing between the tree age groups. Fibre diameter (22.4 mm) was significantly lower (p<0.05) for the trees which were three years of age when compared to five and seven years age groups (26.6 mm and 24. 7 mm), respectively. Means of fibre length, lumen diameter and cell wall thickness were 0.83 mm, 18.3 mm, and 6.2 mm, respectively, with no significant differences detected between trees in all age groups. Further calculation on the coefficient of suppleness and runkel ratio suggest that wood from G.sepium may have the potential for insulation board manufacturing and paper making. However, future studies should experiment the utilisation of this species for these products to determine its full potential.

Fiber Morphology of Different Bamboo Species and Age

2021 ◽  
Vol 1025 ◽  
pp. 312-318
Author(s):  
Nur Musfirah Suhaimi ◽  
Nurul Husna Mohd Hassan ◽  
Rushdan Ibrahim ◽  
Latifah Jasmani
Keyword(s):  
Cell Wall ◽  
Fiber Length ◽  
Fiber Diameter ◽  
Raw Materials ◽  
Paper Industry ◽  
Pulp And Paper Industry ◽  
Pulp And Paper ◽  
Lumen Diameter ◽  
Bamboo Species ◽  
Fiber Morphology

Fiber morphology of 3 species of bamboo namely Bambusa vulgaris, Gigantochloa levis, and Gigantochloa scortechinii at age of 1, 3, and 5 years, was evaluated. It shows that different species of bamboo have different properties in terms of their fiber morphology that consist of fiber length, fiber diameter, and lumen diameter. Fiber diameter, fiber length, and cell wall thickness increased with the increasing of the bamboo age but the lumen diameter decreased when the bamboo gets older. G. levis at age 1 to 3 and G. scortechinii at age 1 have high potential to be the raw materials for the pulp and paper industry.

scholarly journals Correlation between Genetic Characteristics, Cell Structure and Material Properties of Moso Bamboo (Phyllostachys edulis (Carriere) J. Houzeau) in Different Areas of China

Forests ◽  
2022 ◽  
Vol 13 (1) ◽  
pp. 107
Author(s):  
Wenbo Zhang ◽  
Tao Hu ◽  
Yanting Chang ◽  
Benhua Fei ◽  
Yanjun Ma ◽  
...  
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Material Properties ◽  
Bending Strength ◽  
Cell Structure ◽  
Leaf Length ◽  
Moso Bamboo ◽  
Lumen Diameter ◽  
Phyllostachys Edulis ◽  
Breast Height

Moso bamboo (Phyllostachys edulis (Carriere) J. Houzeau), native to China, is one of the most economically and ecologically important bamboo species. Since the economic interests and the strong clonality, it has been widely cultivated in southern China, which inevitably reduces the natural stands and leads to gene loss in this species. In this study, three natural populations of Moso bamboo distributed in Anhui, Guangxi, and Zhejiang province, were used to analyze the correlation between phenotypic traits, cell structure, and material properties from the perspective of phenotypic, genetic, and environmental. Among those traits and properties, fiber width was correlated with wall thickness at breast height and average nodes length under branch positively. Leaf length was correlated positively with fiber lumen diameter and parenchyma lumen diameter. Furthermore, it showed a very close correlation between moisture content, bending strength, modulus of elasticity, and diameter at breast height, clear height, and leaf length. The lumen diameter of fiber cell wall thickness is positively correlated with bending strength and modulus of elasticity. Density is positively correlated with parenchyma cell wall thickness. The experimental design is relatively detailed and representative, and the workload is huge. This study reflects the research objectives with scientific and rational experiments and data. This study will analyze the differences of various indicators from the perspective of genetic to build a bridge between micro-structure and macro-structure for rational utilization of the whole area of Moso bamboo resources in China.

Properties of Gliricidia Wood (Gliricidia sepium) lntercropped with Cocoa (Theobroma cocoa) in Malaysia

2014 ◽  
Vol 11 (1) ◽  
pp. 51
Author(s):  
Mohd Helmy Ibrahim ◽  
Mohd Nazip Suratman ◽  
Razali Abd Kader
Keyword(s):  
Cell Wall ◽  
Specific Gravity ◽  
Moisture Content ◽  
Wall Thickness ◽  
Age Groups ◽  
Cell Wall Thickness ◽  
Tree Age ◽  
Lumen Diameter ◽  
Full Potential ◽  
Significant Difference

Trees planted from agroforestry practices can become valuable resources in meeting the wood requirements of many nations. Gliricidia septum is an exotic species introduced to the agricultural sector in Malaysia mainly for providing shade for cocoa and coffee plantations. This study investigates its wood physical properties (specific gravity and moisture content) and fibre morphology (length, lumen diameter and cell wall thickness) of G.sepium at three intervals according to age groups (three, five and seven years of ages). Specific gravity (0.72) was significantly higher at seven years of age as compared to five (0.4 I) and three (0.35) years age group with a mean of 0.43 (p<0.05). Mean moisture content was 58.3% with no significant difference existing between the tree age groups. Fibre diameter (22.4 mm) was significantly lower (p<0.05) for the trees which were three years of age when compared to five and seven years age groups (26.6 mm and 24. 7 mm), respectively. Means of fibre length, lumen diameter and cell wall thickness were 0.83 mm, 18.3 mm, and 6.2 mm, respectively,, with no significant differences detected between trees in all age groups. Further calculation on the coefficient of suppleness and runkel ratio suggest that wood from G.sepium may have the potential for insulation board manufacturing and paper making. However, future studies should experiment the utilisation of this species for these products to determine its full potential.

scholarly journals Wood and bark fiber characteristics of Acacia melanoxylon and comparison to Eucalyptus globules

CERNE ◽  
2011 ◽  
Vol 17 (1) ◽  
pp. 61-68 ◽  
Author(s):  
Fatima Tavares ◽  
Teresa Quilhó ◽  
Helena Pereira
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Eucalyptus Globulus ◽  
Fiber Length ◽  
Tree Height ◽  
Specific Pattern ◽  
Cell Wall Thickness ◽  
Wood Fibers ◽  
Acacia Melanoxylon ◽  
Fiber Wall

Wood and bark fibers of Acacia melanoxylon were characterized and compared to Eucalyptus globulus which is a major quality source of pulp fibers. In 20 trees from four sites, fiber length and wall thickness were measured at 5, 35 and 65% of total tree height and at 10, 30, 50, 70 and 90% of the distance from pith. Maceration were prepared in a 1:1 glacial acetic acid:hydrogen peroxide solution. Wood and bark fiber length varied between 0.90 - 0.96 mm and 1.33 - 1.59 mm respectively. The cell wall thickness varied between 3.45 - 3.89 µm in wood and 5.01 - 5.40 µm in bark. Wood and bark fiber length decreased from the bottom to the top of the tree and cell wall thickness had no specific pattern for axial variation. Fiber length and wall thickness increased from the pith to the bark, but the wall thickness increased slightly with some fluctuations. In Acacia melanoxylon significant site differences were found in relation to bark fiber length and to wood wall thickness. The fibers of Acacia melanoxylon were similar to those of Eucalyptus globulus but the wood fibers were thinner and the bark fibers thicker. The radial variation was similar in both species. In wood of Eucalyptus globulus, fiber wall thickness increases from the base to the middle of tree height and decreases to the top; in the bark decreases from the base to the top. In Eucalyptus globulus fibers bark are higher in the top.

scholarly journals ANATOMY AND DRYING OF WOOD OF FOUR SPECIES FROM AN AGROFORESTRY SYSTEM

FLORESTA ◽  
2021 ◽  
Vol 51 (4) ◽  
pp. 910
Author(s):  
Elder Eloy ◽  
Rômulo Trevisan ◽  
Tainara Dos Santos Piecha ◽  
Magda Rosa Fontoura ◽  
Henrique Webber Dalla Costa ◽  
...  
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Fiber Diameter ◽  
Pearson Correlation ◽  
Agroforestry System ◽  
Wood Products ◽  
Cell Wall Thickness ◽  
Lumen Diameter ◽  
Study Region ◽  
Schizolobium Parahyba

Drying is an important process in the generation of wood products, as it increases the quality of the final products; however, it is influenced by various anatomical characteristics. The aim of this study was to evaluate the influence of anatomy on the drying of wood of Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis W. Hill × Eucalyptus urophylla S.T. Blake (hybrid), and Schizolobium parahyba (Vell.) Blake trees from an agroforestry system. Three trees aged 9 years were sampled for each species. The trees were removed from the study region when their diameter at breast height (DBH) was 1.30 m from the ground. Blocks were made with dimensions of 5.0 × 5.0 × 15.0 cm for the evaluation of oven drying and 1.5 × 1.5 × 2.0 cm for anatomical features. S. parahyba has the highest value of fiber diameter (35.1 µm) and lumen diameter (27.6 µm), whereas P. dubium had the highest value of cell wall thickness (6.8 µm). The average equilibrium moisture content was 10.98% after 40 days of drying. The anatomy of the wood influenced the drying of the four species intensity, which was related to humidity during all periods. The anatomical parameters that most influenced drying were fiber diameter (Pearson correlation coefficient: 0.77), lumen diameter (0.76), and fiber cell wall thickness (0.73); the higher the values, the greater was the drying intensity.

Effect of Growth Rate on Fibre Characteristics in Norway Spruce (Picea abies (L.) Karst.)

Holzforschung ◽  
2002 ◽  
Vol 56 (5) ◽  
pp. 449-460 ◽  
Author(s):  
H. Mäkinen ◽  
P. Saranpää ◽  
S. Linder
Keyword(s):  
Growth Rate ◽  
Cell Wall ◽  
Norway Spruce ◽  
Wall Thickness ◽  
Fibre Length ◽  
Cell Wall Thickness ◽  
Lumen Diameter ◽  
Breast Height ◽  
And Control ◽  
Fibre Characteristics

Summary To study the effect of growth rate on fibre characteristics and their variations in Norway spruce, trees were sampled in a nutrient optimisation experiment in northern Sweden. Data was collected from 24 trees (40 years old) from fertilised and control plots after 12 years of annual nutrient application, as well as from older trees outside the experimental area. Fibre length, fibre diameter, cell wall thickness, lumen diameter and cell wall percentage were measured from every third annual ring at breast height and at a height of 4 m. Fibre properties, as well as their standard deviation, were closely related to ring number and distance from the pith. Intra-ring variation of fibre characteristics was high compared to their variation between trees. Fertilisation reduced fibre length and cell wall thickness, but increased fibre and lumen diameter in rings of the same age. The difference in fibre width, cell wall thickness and lumen diameter between fertilised and control trees was less apparent, but a greater difference in fibre length was found between the treatments with regard to distance from the pith. There was a similar effect of fertilisation on fibre properties in early- and latewood. The effect of enhanced growth rate was less pronounced at a height of 4 m (near the pith) than at breast height (in older rings). It was demonstrated that it is possible to model intra-tree variability of fibre characteristics using ring width and cambial age as independent variables. Models presented are, however, limited by the relatively young age of the sample trees used.

Effects of thinning and fertilisation on tracheid dimensions and lignin content of Norway spruce

Holzforschung ◽  
2007 ◽  
Vol 61 (3) ◽  
pp. 301-310 ◽  
Author(s):  
Tuula Jaakkola ◽  
Harri Mäkinen ◽  
Pekka Saranpää
Keyword(s):  
Cell Wall ◽  
Norway Spruce ◽  
Wall Thickness ◽  
Lignin Content ◽  
Block Design ◽  
Cell Wall Thickness ◽  
Lumen Diameter ◽  
Commercial Thinning ◽  
Tracheid Length ◽  
Treatment Onset

Abstract The effects of the intensity and timing of commercial thinning and fertilisation on tracheid properties and lignin content of Norway spruce [Picea abies (L.) Karst] were studied in two long-term fertilisation-thinning experiments in central and eastern Finland. The experiments consisted of three thinning and three fertilisation treatments in a randomised block design. Fertilisation levels were: unfertilised (F 0), 150 kg N ha-1 (F 1), and 300 kg N ha-1 (F 2). Thinning treatments were: delayed first thinning (T 0), normal thinning (T 1), and intensive first thinning (T 2). A total of 85 trees were sampled 26 years after treatment onset. Tracheid length was measured for 24 trees and cell wall thickness and lumen diameter for 16 trees grown under treatments F 0 T 0, F 0 T 2, F 1 T 0, and F 1 T 2. Lignin content was determined for all trees sampled (n=85) grown in all the different treatment combinations. We found only small differences in tracheid length (0–6%), cell wall thickness (1–17%) and lumen diameter (0–9%), depending on the different fertilisation and thinning conditions. We also found only slightly (1–2%) higher lignin content for fertilised (F 1 and F 2) than for unfertilised (F 0 ) trees (25.8% and 26.0% vs. 25.4%). Trees yielded 26.0% lignin content after intensive first thinning (T 2), 25.9% following normal thinning (T 1), and 25.4% after delayed first thinning (T 0). Thus, the prevailing fertilisation and thinning practice for Norway spruce stands in Finland may not cause essential changes in tracheid properties and lignin content.

Sign in / Sign up

Export Citation Format

Share Document