Phase Decomposition and Deformation of L12-Ordered Co-Rich Co3Ti

1994 ◽  
Vol 364 ◽  
Author(s):  
M. Nemoto ◽  
W. H. Tian ◽  
K. Hayashi
Keyword(s):  
Electron Microscope ◽  
High Temperature ◽  
Annealing Temperature ◽  
High Temperature Strength ◽  
Phase Decomposition ◽  
Solution Annealing ◽  
Rich Phase ◽  
Transmission Electron ◽  
The Matrix ◽  
Matrix Lattice

AbstractThe Co3Ti phase hardens appreciably by the fine precipitation of disordered fee Co-rich phase upon aging after quenching from solution annealing temperature. Transmission electron microscope(TEM) observations revealed that the precipitates are platelet in shape, lying nearly parallel to the {100} planes of the L12-ordered matrix, and perfectly coherent with the matrix lattice at the beginning of aging. The high temperature strength increases appreciably with the fine precipitation of disordered Co-rich phase over the whole temperature range investigated. TEM observations of the underaged and deformed alloys revealed that superdislocations are pinned by precipitates indicating an attractive interaction between dislocations and precipitates. At the overaged state, thin twins are introduced in the fee Co-rich precipitates during deformation.

Characterization of the disproportionated NdFeCoZrB alloy by means of electron microscopy

1997 ◽  
Vol 12 (3) ◽  
pp. 581-584 ◽  
Author(s):  
Jian-rong Gao ◽  
Xiao-ping Song ◽  
Xiao-tian Wang
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Fine Particles ◽  
Rich Phase ◽  
Colony Type ◽  
Transmission Electron ◽  
The Matrix ◽  
Scanning Electron ◽  
Comparable Size

The microstructure of the disproportionated NdFeCoZrB alloy during the solid-HDDR (hydrogenation-disproportionation-desorption-recombination) process was investigated by means of scanning electron microscope (SEM) and transmission electron microscope (TEM). Except for a similar colony-type structure to ternary alloy, fine particles including spherical (Fe, Co)2B phase and undecomposed rim-like Nd2(Fe, Co)14B compound were found dispersed within the α–(Fe, Co) matrix of the microstructure of the disproportionated NdFeCoZrB alloy. An unknown Fe-rich phase with a comparable size to that of the matrix grain was also detected by electron diffraction. These results strongly suggest that the undecomposed rim-like Nd2(Fe, Co)14B particles are probably the memory sites for the origin of anisotropy of the received NdFeCoZrB materials.

Precipitation of NiHfsi phase in NiAl single crystals containing Hf

1995 ◽  
Vol 53 ◽  
pp. 532-533
Author(s):  
A. Garg ◽  
R. D. Noebe ◽  
R. Darolia
Keyword(s):  
High Temperature ◽  
Single Crystals ◽  
High Temperature Strength ◽  
Bridgman Technique ◽  
Shell Mold ◽  
Third Phase ◽  
Unknown Phase ◽  
Transmission Electron ◽  
Two Phases ◽  
Nial Matrix

Small additions of Hf to NiAl produce a significant increase in the high-temperature strength of single crystals. Hf has a very limited solubility in NiAl and in the presence of Si, results in a high density of G-phase (Ni16Hf6Si7) cuboidal precipitates and some G-platelets in a NiAl matrix. These precipitates have a F.C.C structure and nucleate on {100}NiAl planes with almost perfect coherency and a cube-on-cube orientation-relationship (O.R.). However, G-phase is metastable and after prolonged aging at high temperature dissolves at the expense of a more stable Heusler (β'-Ni2AlHf) phase. In addition to these two phases, a third phase was shown to be present in a NiAl-0.3at. % Hf alloy, but was not previously identified (Fig. 4 of ref. 2 ). In this work, we report the morphology, crystal-structure, O.R., and stability of this unknown phase, which were determined using conventional and analytical transmission electron microscopy (TEM).Single crystals of NiAl containing 0.5at. % Hf were grown by a Bridgman technique. Chemical analysis indicated that these crystals also contained Si, which was not an intentional alloying addition but was picked up from the shell mold during directional solidification.

High Temperature Mechanical Properties of Ni-Al-Cr Based Alloys with Refractory Alloying Elements

2006 ◽  
Vol 510-511 ◽  
pp. 358-361
Author(s):  
Won Yong Kim ◽  
Han Sol Kim ◽  
In Dong Yeo ◽  
Mok Soon Kim
Keyword(s):  
High Temperature ◽  
Volume Fraction ◽  
Lattice Parameter ◽  
Alloying Elements ◽  
Solid Solution Hardening ◽  
High Temperature Strength ◽  
High Temperature Mechanical Properties ◽  
Die Materials ◽  
The Matrix ◽  
Effective Role

We report on advanced Ni3Al based high temperature structural alloys with refractory alloying elements such as Zr and Mo to be apllied in the fields of die-casting and high temperature press forming as die materials. The duplex microstructure consisting of L12 structured Ni3Al phase and Ni5Zr intermetallic dispersoids was observed to display the microstructural feature for the present alloys investigated. Depending on alloying elements, the volume fraction of 2nd phase was measured to be different, indicating a difference in solid solubility of alloying elements in the matrix γ’ phase. Lattice parameter of matrix phase increased with increasing content of alloying elements. In the higher temperature region more than 973K, the present alloys appeared to show their higher strength compared to those obtained in conventional superalloys. On the basis of experimental results obtained, it is suggested that refractory alloying elements have an effective role to improve the high temperature strength in terms of enhanced thermal stability and solid solution hardening.

Formation mechanism of Sn-patch between SnAgCu solder and Ti/Ni(V)/Cu under bump metallization

2009 ◽  
Vol 24 (8) ◽  
pp. 2638-2643 ◽  
Author(s):  
Kai-Jheng Wang ◽  
Yan-Zuo Tsai ◽  
Jenq-Gong Duh ◽  
Toung-Yi Shih
Keyword(s):  
Electron Microscope ◽  
Field Emission ◽  
Formation Mechanism ◽  
Transmission Electron Microscope ◽  
Electron Probe ◽  
Under Bump Metallization ◽  
Rich Phase ◽  
Snagcu Solder ◽  
Electron Probe Microanalyzer ◽  
Transmission Electron

An Sn-patch formed in Ni(V)-based under bump metallization during reflow and aging. To elucidate the evolution of the Sn-patch, the detailed compositions and microstructure in Sn–Ag–Cu and Ti/Ni(V)/Cu joints were analyzed by a field emission electron probe microanalyzer (EPMA) and transmission electron microscope (TEM), respectively. There existed a concentration redistribution in the Sn-patch, and its microstructure also varied with aging. The Sn-patch consisted of crystalline Ni and an amorphous Sn-rich phase after reflow, whereas V2Sn3 formed with amorphous an Sn-rich phase during aging. A possible formation mechanism of the Sn-patch was proposed.

Attritious Wear of Silicon Carbide

1976 ◽  
Vol 98 (4) ◽  
pp. 1125-1134 ◽  
Author(s):  
R. Komanduri ◽  
M. C. Shaw
Keyword(s):  
Silicon Carbide ◽  
Electron Microscope ◽  
High Temperature ◽  
High Speed ◽  
Layer By Layer ◽  
Wear Area ◽  
Work Material ◽  
Transmission Electron ◽  
Metal Silicides ◽  
Boundary Fracture

Attritious wear of silicon carbide in simulated grinding tests against a cobalt base superalloy at high speed and extremely small feed rate was studied using a scanning electron microscope (SEM) and an auger electron spectroscope (AES). In many cases the wear area of silicon carbide was found to be concave rather than planar in shape. Several microcracks and grain boundary fracture were also observed. No evidence of metal build-up was observed on silicon carbide which was not the case with aluminum oxide. AES study of the rubbed surface on the work material and transmission electron microscope (TEM) investigation of the wear debris suggest that attritious wear of silicon carbide is due to one or more of the following mechanisms: 1 – Preferential removal of surface atoms on the abrasive, layer by layer, by oxidation under high temperature and a favorably directed shear stress; 2 – disassociation of silicon carbide at high temperature and (a) diffusion of silicon into the work material and formation of metal silicides and (b) diffusion of carbon into the work material and formation of unstable metal carbides (in the present case Ni3C and Co3C) which decompose during cooling to metal and carbon atoms; 3 – pinocoidal cleavage fracture of silicon carbide on basal planes c(0001) resulting in the removal of many micron-sized crystallites.

Transmission Electron Microscope Specimen Preparation of Metal Matrix Composites Using the Focused Ion Beam Miller

2000 ◽  
Vol 6 (5) ◽  
pp. 452-462 ◽  
Author(s):  
Julie M. Cairney ◽  
Robert D. Smith ◽  
Paul R. Munroe
Keyword(s):  
Electron Microscope ◽  
Metal Matrix Composites ◽  
Transmission Electron Microscope ◽  
Metal Matrix ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Matrix Composites ◽  
Transmission Electron ◽  
The Matrix ◽  
Ceramic Reinforcement

AbstractTransmission electron microscope samples of two types of metal matrix composites were prepared using both traditional thinning methods and the more novel focused ion beam miller. Electropolishing methods were able to produce, very rapidly, thin foils where the matrix was electron transparent, but the ceramic reinforcement particles remained unthinned. Thus, it was not possible in these foils to study either the matrix-reinforcement interface or the microstructure of the reinforcement particles themselves. In contrast, both phases in the composites prepared using the focused ion beam miller thinned uniformly. The interfaces in these materials were clearly visible and the ceramic reinforcement was electron transparent. However, microstructural artifacts associated with ion beam damage were also observed. The extent of these artifacts and methods of minimizing their effect were dependent on both the materials and the milling conditions used.

Effect of Annealing Temperature on the Microstructure of 2195 Al-Li Alloy Sheet

2021 ◽  
Vol 1026 ◽  
pp. 49-58
Author(s):  
Bo Feng ◽  
Bai Qing Xiong
Keyword(s):  
Mechanical Properties ◽  
Electron Microscope ◽  
Annealing Temperature ◽  
Testing Machine ◽  
Annealing Treatment ◽  
Alloy Sheet ◽  
Transmission Electron ◽  
Δ Phase ◽  
Backscattered Electron ◽  
Alloy Increase

The annealing temperature is a key parameter for the mechanical properties and microstructure control of the 2195 Al-Li alloy sheet in the annealing process. In the present study, the effect of annealing temperature on the microstructure of 2195 Al-Li alloy sheet was investigated using a general mechanical testing machine, scanning electron microscope (SEM), transmission electron microscope (TEM), and backscattered electron microscope (EBSD). It was found that the optimized annealing temperature for 2195Al-Li alloy sheet of H112 state is 400°C, the alloy sheet shows the satisfactory mechanical properties. In addition, with the increase of annealing temperature, the δ' phase, the θ' phase and the T1 phase are formed in the alloy sheet, which leads to the strength of the alloy increase. Furthermore, the annealing temperature obviously affect the texture component and intensity during annealing treatment process.

scholarly journals Formation and evolution of porosity during high temperature creep of a nickel-based single crystal superalloy

2020 ◽  
Vol 155 ◽  
pp. 01005
Author(s):  
Weiwei Liu ◽  
Yuanyuan Guo ◽  
Mai Zhang ◽  
Jian Zhang
Keyword(s):  
Electron Microscope ◽  
High Temperature ◽  
Single Crystal ◽  
Volume Fraction ◽  
Great Influence ◽  
Single Crystal Superalloy ◽  
Creep Process ◽  
Steady Creep ◽  
Transmission Electron ◽  
Formation And Evolution

A Re-containing single-crystal superalloy was used to research the high temperature low stress creep behavior. Transmission electron microscope, scanning electron microscope and some other research methods are employed. The results and analysis are summarized below: Two mechanisms for the steady creep are found in this experiment. The volume fraction of pores after creep test at 1100°C increased more than 2 times compared with that before test, but the increasing at 1000°C is relatively small, which reveals that temperature has an great influence on the formation of pore during creep; There are two types of pores associated with fracture during the creep process. One is the casting shrinkage located between the interdentritic, which is formed in the solidification of the alloy. Another type of pore is nucleated and growing during the creep deformation.

Mechanical Properties and Microstructure of the Newly Developed Steel (Low C 18Cr-11Ni-3Cu-Mo-Nb-B-N) After Aging Treatment

2020 ◽  
Author(s):  
Nao Otaki ◽  
Tomoaki Hamaguchi ◽  
Takahiro Osuki ◽  
Yuhei Suzuki ◽  
Masaki Ueyama ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Vickers Hardness ◽  
Elevated Temperatures ◽  
Rupture Strength ◽  
Aging Treatment ◽  
High Strength ◽  
High Temperature Strength ◽  
Short Term ◽  
Rich Phase

Abstract In petroleum refinery plants, materials with high sensitization resistance are required. 347AP has particularly been developed for such applications and shows good sensitization resistance owing to its low C content. However, further improvement in high temperature strength is required for high temperature operations in complex refineries, such as delayed cokers. Recently, a new austenitic stainless steel (low C 18Cr-11Ni-3Cu-Mo-Nb-B-N, UNS No. S34752) with high sensitization resistance and high strength at elevated temperatures has been developed. In this study, the mechanical properties and microstructures of several aged specimens will be reported. By conducting several aging heat treatments in the range of 550–750 °C for 300–10,000 h on the developed steel, it was revealed that there were only few coarse precipitates that assumed sigma phase even after aging at 750 °C for 10,000 h. This indicates that the newly developed steel has superior phase stability. The developed steel drastically increased its Vickers hardness by short-term aging treatments. Through transmission electron microscopy observations, the fine precipitates of Cu-rich phase were observed dispersedly in the ruptured specimen. Therefore, the increase in Vickers hardness in short-term aging is possibly owing to the dispersed precipitation of Cu-rich phase. There was further increase in Vickers hardness owing to Z phase precipitation; however, the increment was smaller than that caused by Cu-rich phase. The newly developed alloy demonstrated excellent creep rupture strength even in the long-term tests of approximately 30,000 h, which is attributed to these precipitates.

scholarly journals Study of the Mechanical Properties of a Nanostructured Surface Layer on 316L Stainless Steel

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
F. C. Lang ◽  
Y. M. Xing ◽  
J. Zhu ◽  
Y. R. Zhao
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Surface Layer ◽  
Electron Microscope ◽  
316L Stainless Steel ◽  
Nanostructured Surface ◽  
Transmission Electron ◽  
Tensile Process ◽  
The Matrix ◽  
Reverse Analysis

A nanostructured surface layer (NSSL) was generated on a 316L stainless steel plate through surface nanocrystallization (SNC). The grains of the surface layer were refined to nanoscale after SNC treatment. Moreover, the microstructure and mechanical properties of NSSL were analyzed with a transmission electron microscope (TEM) and scanning electron microscope (SEM), through nanoindentation, and through reverse analysis of finite element method (FEM). TEM results showed that the grains in the NSSL measured 8 nm. In addition, these nanocrystalline grains took the form of random crystallographic orientation and were roughly equiaxed in shape. In situ SEM observations of the tensile process confirmed that the motions of the dislocations were determined from within the material and that the motions were blocked by the NSSL, thus improving overall yielding stress. Meanwhile, the nanohardness and the elastic modulus of the NSSL, as well as those of the matrix, were obtained with nanoindentation technology. The reverse analysis of FEM was conducted with MARC software, and the process of nanoindentation on the NSSL and the matrix was simulated. The plastic mechanical properties of NSSL can be derived from the simulation by comparing the results of the simulation and of actual nanoindentation.

Sign in / Sign up

Export Citation Format

Share Document