Characterization of ZnSe:N Using Screening Effects

1995 ◽  
Vol 406 ◽  
Author(s):  
I. Kuskovsky ◽  
G. F. Neumark
Keyword(s):  
Thermal Activation ◽  
Interstitial Site ◽  
Activation Energies ◽  
Free Carrier ◽  
Hall Measurements ◽  
Electrical Data ◽  
Good Agreement

AbstractPhotoluminescence (PL) and Hall measurements allow one to obtain important parameters of semiconductors, such as impurity concentrations, compensation, and activation energies (EA). Usual analyses of such data assume constant EA. However, it is well known that EA depends on free carrier and impurity concentrations, and thus on temperature, due to screening effects. We here analyze literature data on ZnSe:N using screening effects. An observed decrease of EA with temperature (from PL data) had been used to suggest an interstitial site for N. With inclusion of screening, we obtained good agreement with the data, so that the idea of interstitial N is not required. In applying the screening theory to Hall measurements, we obtained lower impurity concentrations than with use of a constant EA. It is also to be noted that we fit both optical and electrical data with this approach. We further suggest that screening is the cause of an observed difference between optically observed and thermal activation energies.

Characterization of Semi-insulating SiC

2006 ◽  
Vol 911 ◽  
Author(s):  
Nguyen Tien Son ◽  
Patrick Carlsson ◽  
Björn Magnusson ◽  
Erik Janzén
Keyword(s):  
Vapor Deposition ◽  
Thermal Activation ◽  
Deep Level ◽  
Chemical Vapor ◽  
Activation Energies ◽  
Vapor Transport ◽  
Physical Vapor Transport ◽  
Paramagnetic Resonance ◽  
Electron Paramagnetic

AbstractElectron paramagnetic resonance was used to study defects in high-purity semi-insulating (HPSI) substrates grown by high-temperature chemical vapor deposition and physical vapor transport. Deep level defects associated to different thermal activation energies of the resistivity ranging from ~0.6 eV to ~1.6 eV in HPSI substrates are identified and their roles in carrier compensation processes are discussed. Based on the results obtained in HPSI materials, we discuss the carrier compensation processes in vanadium-doped SI SiC substrates and different activation energies in the material.

scholarly journals Characterization of Tiled Architecture for C-Band 1-Bit Beam-Steering Transmitarray

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1259
Author(s):  
Dmitry Kozlov ◽  
Irina Munina ◽  
Pavel Turalchuk ◽  
Vitalii Kirillov ◽  
Alexey Shitvov ◽  
...  
Keyword(s):  
Communication Systems ◽  
Beam Steering ◽  
Unit Cell ◽  
Electromagnetic Simulations ◽  
Fifth Generation ◽  
Full Wave ◽  
Array Architecture ◽  
Modulation Pattern ◽  
Good Agreement

A new implementation of a beam-steering transmitarray is proposed based on the tiled array architecture. Each pixel of the transmitarray is manufactured as a standalone unit which can be hard-wired for specific transmission characteristics. A set of complementary units, providing reciprocal phase-shifts, can be assembled in a prescribed spatial phase-modulation pattern to perform beam steering and beam forming in a broad spatial range. A compact circuit model of the tiled unit cell is proposed and characterized with full-wave electromagnetic simulations. Waveguide measurements of a prototype unit cell have been carried out. A design example of a tiled 10 × 10-element 1-bit beam-steering transmitarray is presented and its performance benchmarked against the conventional single-panel, i.e., unibody, counterpart. Prototypes of the tiled and single-panel C-band transmitarrays have been fabricated and tested, demonstrating their close performance, good agreement with simulations and a weak effect of fabrication tolerances. The proposed transmitarray antenna configuration has great potential for fifth-generation (5G) communication systems.

scholarly journals Visco-Hyperelastic Characterization of the Equine Immature Zona Pellucida

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1223
Author(s):  
Elisa Ficarella ◽  
Mohammad Minooei ◽  
Lorenzo Santoro ◽  
Elisabetta Toma ◽  
Bartolomeo Trentadue ◽  
...  
Keyword(s):  
Zona Pellucida ◽  
Soft Matter ◽  
Mechanical Response ◽  
Mechanical Characterization ◽  
Nonlinear Material ◽  
Prony Series ◽  
Critical Comparison ◽  
Highly Nonlinear ◽  
Good Agreement

This article presents a very detailed study on the mechanical characterization of a highly nonlinear material, the immature equine zona pellucida (ZP) membrane. The ZP is modeled as a visco-hyperelastic soft matter. The Arruda–Boyce constitutive equation and the two-term Prony series are identified as the most suitable models for describing the hyperelastic and viscous components, respectively, of the ZP’s mechanical response. Material properties are identified via inverse analysis based on nonlinear optimization which fits nanoindentation curves recorded at different rates. The suitability of the proposed approach is fully demonstrated by the very good agreement between AFM data and numerically reconstructed force–indentation curves. A critical comparison of mechanical behavior of two immature ZP membranes (i.e., equine and porcine ZPs) is also carried out considering the information on the structure of these materials available from electron microscopy investigations documented in the literature.

Electrical Characterization of Low Temperature GaAs Layers, and Observation of the Extremely Large Carrier Concentrations in Undoped Material

1991 ◽  
Vol 241 ◽  
Author(s):  
Bijan Tadayon ◽  
Mohammad Fatemi ◽  
Saied Tadayon ◽  
F. Moore ◽  
Harry Dietrich
Keyword(s):  
Molecular Beam Epitaxy ◽  
Low Temperature ◽  
Substrate Temperature ◽  
Molecular Beam ◽  
Electrical Characterization ◽  
Physical Characteristics ◽  
Hall Measurements ◽  
Undoped Material ◽  
Low Temperature Gaas

ABSTRACTWe present here the results of a study on the effect of substrate temperature, Ts, on the electrical and physical characteristics of low temperature (LT) molecular beam epitaxy GaAs layers. Hall measurements have been performed on the asgrown samples and on samples annealed at 610 °C and 850 °C. Si implantation into these layers has also been investigated.

Estimation of Interlayer Thickness in Inorganic Particulate-Filled Polymer Composites

2011 ◽  
Vol 24 (6) ◽  
pp. 777-788 ◽  
Author(s):  
J.Z. Liang
Keyword(s):  
Polymer Composites ◽  
Volume Fraction ◽  
Particle Diameter ◽  
Interfacial Structure ◽  
Interlayer Thickness ◽  
Filled Polymer ◽  
Mechanical And Physical Properties ◽  
The Relationship ◽  
Good Agreement

The structure of the interlayer between matrix and inclusions affect directly the mechanical and physical properties of inorganic particulate-filled polymer composites. The interlayer thickness is an important parameter for characterization of the interfacial structure. The effects of the interlayer between the filler particles and matrix on the mechanical properties of polymer composites were analyzed in this article. On the basis of a simplified model of interlayer, an expression for estimating the interlayer thickness ([Formula: see text]) was proposed. In addition, the relationship between the [Formula: see text] and the particle size and its concentration was discussed. The results showed that the calculations of the [Formula: see text] and thickness/particle diameter ratio ([Formula: see text]) increased nonlinearly with an increase of the volume fraction of the inclusions. Moreover, the predictions of [Formula: see text] and the relevant data reported in literature were compared, and good agreement was found between them.

scholarly journals Characterization of the New Metallo-β-Lactamase VIM-13 and Its Integron-Borne Gene from a Pseudomonas aeruginosa Clinical Isolate in Spain

2008 ◽  
Vol 52 (10) ◽  
pp. 3589-3596 ◽  
Author(s):  
Carlos Juan ◽  
Alejandro Beceiro ◽  
Olivia Gutiérrez ◽  
Sebastián Albertí ◽  
Margalida Garau ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Pcr Amplification ◽  
Class 1 Integron ◽  
Negative Results ◽  
New Variant ◽  
Class B ◽  
Class 1 ◽  
Encoding Gene ◽  
Good Agreement

ABSTRACT During a survey conducted to evaluate the incidence of class B carbapenemase (metallo-β-lactamase [MBL])-producing Pseudomonas aeruginosa strains from hospitals in Majorca, Spain, five clinical isolates showed a positive Etest MBL screening test result. In one of them, strain PA-SL2, the presence of a new bla VIM derivative (bla VIM-13) was detected by PCR amplification with bla VIM-1-specific primers followed by sequencing. The bla VIM-13-producing isolate showed resistance to all β-lactams (except aztreonam), gentamicin, tobramycin, and ciprofloxacin. VIM-13 exhibited 93% and 88% amino acid sequence identities with VIM-1 and VIM-2, respectively. bla VIM-13 was cloned in parallel with bla VIM-1, and the resistance profile conferred was analyzed both in Escherichia coli and in P. aeruginosa backgrounds. Compared to VIM-1, VIM-13 conferred slightly higher levels of resistance to piperacillin and lower levels of resistance to ceftazidime and cefepime. VIM-13 and VIM-1 were purified in parallel as well, and their kinetic parameters were compared. The k cat/K m ratios for the antibiotics mentioned above were in good agreement with the MIC data. Furthermore, EDTA inhibited the activity of VIM-13 approximately 25 times less than it inhibited the activity of VIM-1. VIM-13 was harbored in a class 1 integron, along with a new variant (Ala108Thr) of the aminoglycoside-modifying enzyme encoding gene aacA4, which confers resistance to gentamicin and tobramycin. Finally, the VIM-13 integron was apparently located in the chromosome, since transformation and conjugation experiments consistently yielded negative results and the bla VIM-13 probe hybridized only with the genomic DNA.

Thermal activation energies of Mg in GaN:Mg measured by the Hall effect and admittance spectroscopy

2000 ◽  
Vol 88 (5) ◽  
pp. 2564-2569 ◽  
Author(s):  
D. J. Kim ◽  
D. Y. Ryu ◽  
N. A. Bojarczuk ◽  
J. Karasinski ◽  
S. Guha ◽  
...  
Keyword(s):  
Hall Effect ◽  
Thermal Activation ◽  
Activation Energies ◽  
Admittance Spectroscopy

Simulation and prediction of optical characterization of casting (Adamantan-Fulgide) thin films using (CTANNs) approach

2019 ◽  
Vol 33 (11) ◽  
pp. 1950093 ◽  
Author(s):  
A. M. A. EL-Barry ◽  
D. M. Habashy
Keyword(s):  
Experimental Data ◽  
Thin Films ◽  
Back Propagation ◽  
Optical Characterization ◽  
Experimental Information ◽  
Training Algorithm ◽  
Energy Gaps ◽  
Resilient Back Propagation ◽  
Good Agreement

For reinforcement, the photochromic field and the cooperation between the theoretical and experimental branches of physics, the computational, theoretical artificial neural networks (CTANNs) and the resilient back propagation (R[Formula: see text]) training algorithm were used to model optical characterizations of casting (Admantan-Fulgide) thin films with different concentrations. The simulated values of ANN are in good agreement with the experimental data. The model was also used to predict values, which were not included in the training. The high precision of the model has been constructed. Moreover, the concentration dependence of both the energy gaps and Urbach’s tail were, also tested. The capability of the technique to simulate the experimental information with best accuracy and the foretelling of some concentrations which is not involved in the experimental data recommends it to dominate the modeling technique in casting (Admantan-Fulgide) thin films.

Sign in / Sign up

Export Citation Format

Share Document