scholarly journals Legal Aspects of 3D Printing

Legal Concept ◽  
2021 ◽  
pp. 138-142
Author(s):  
Victoria Ammalainen ◽  
Keyword(s):  
3D Printing ◽  
Legal Aspect ◽  
Three Dimensional ◽  
Legal Protection ◽  
3D Models ◽  
Legal Regulation ◽  
Legal Aspects ◽  
Scientific Article ◽  
Three Dimensional Model ◽  
The Russian Federation

Introduction: the article discusses the legal aspect of 3D printing and computer 3D models, which are printed using a 3D printer. The prospects, threats and challenges that the development of 3D printing technologies entails are examined. The author comes to the conclusion that it is necessary to adapt the new technological realities to the current legislation and it is necessary to take into account which particular object will be displayed in the three-dimensional model, since this will determine which rights to objects will be affected. Methods: the methodological basis of this scientific article is a number of methods of scientific knowledge, among which the main place is occupied by methods of information processing and logical analysis, synthesis, induction, deduction and generalization. Results: the author’s position on 3D models and their legal regulation is presented. Conclusions: as a result of the study, recommendations were made for improving the regulatory framework, the author proposes to delimit the legal protection of 3D models by amending Art. 1259, 1352 of the Civil Code of the Russian Federation.

Legal aspects of the brand protection in Ukraine and world

2020 ◽  
pp. 133-143
Author(s):  
Ivanna Babetska
Keyword(s):  
Public Relations ◽  
Practical Importance ◽  
Legal Protection ◽  
Legal Regulation ◽  
Legal Aspects ◽  
Scientific Article ◽  
Protection Mechanism ◽  
Brand Protection ◽  
Wide Range ◽  
International Regulations

Purpose. The purpose of the scientific article is to establish the ratio of the meanings of the concepts "trademark", "brand" and "well-known" trademark and then to characterize their common and distinctive features. Indicate the gaps in current legislation and the need to refine certain rules in this aspect to determine the aspects of protection and protection of the brand. Methodology. The methodology includes a comprehensive analysis and generalization of the available scientific and theoretical material and the formulation of appropriate conclusions and recommendations. During the research, the following methods of scientific knowledge were used: terminological, dialectical, logical-semantic, logical-normative, system-structural. Results: in the course of the conducted study, the main and optional components of the brand are determined, which make it possible to determine the features of its legal protection. It has been proved that despite a fairly wide range of domestic and international regulations, there are certain shortcomings of the brand protection mechanism. Originality. The study found that a trademark differs from a brand in that a trademark is a designation that is only the basis of the brand, as for the trademark are not essential such properties of the designation as a certain level of information among consumers and quality as a basis. gaining a reputation; the concept of "brand" is an evaluative, conditional concept, and therefore its consolidation at the regulatory level is impractical. It is sufficient to establish the factors on the basis of which the trademark can be considered "well known". A "well-known" trademark is a designation that is familiar to a wide range of consumers through its use to designate certain goods. Practical importance. The results of the study can be used in law-making activities for the purpose of legal regulation of public relations in the sphere of legal protection of the brand.

ORGANIZATIONAL AND LEGAL ASPECTS OF VOCATIONAL EDUCATION AND VOCATIONAL TRAINING IN INSTITUTIONS OF THE PENAL SYSTEM

2021 ◽  
pp. 20-24
Author(s):  
Екатерина Викторовна Глебова
Keyword(s):  
Vocational Education ◽  
Russian Federation ◽  
Legal Status ◽  
Positive Impact ◽  
Legal Regulation ◽  
Legal Aspects ◽  
Educational Process ◽  
Vocational Education And Training ◽  
Scientific Article ◽  
The Russian Federation

Актуальность темы научной статьи обусловлена тем, что каждый гражданин Российской Федерации независимо от его социального статуса обладает правом на образование. Однако отдельные категории граждан, в частности, осужденные лица, не могут воспользоваться данным правом по причине наличия у них особого юридического статуса. Беспрепятственный доступ осужденных к образовательному процессу оказывает положительное влияние на социальную безопасность и защищенность каждого отдельного гражданина, так как от уровня их образованности напрямую зависит степень их исправления. В данный момент на территории нашей страны наблюдается большая вовлеченность всех слоев населения (включая осужденных) в сферу образовательных услуг как на возмездной, так и на безвозмездной основах. Профессиональное образование и профессиональное обучение как очень важный и необходимый элемент в отечественной пенитенциарной системе регулируется различными источниками права, относящимися и к системе уголовно-исполнительного законодательства, и к системе образовательного законодательства РФ. Целями правового регулирования отношений в сфере образования являются установление государственных гарантий, механизмов реализации прав и свобод человека в указанной сфере, а также защита прав и интересов участников отношений в сфере образования. Problem statement of the scientific article is due to the fact that every citizen of the Russian Federation, regardless of his social status has the right to education. However, some categories of citizens cannot exercise this right due to their special legal status, in particular, we will talk about convicted persons. Unimpeded access of this category of citizens to the educational process has a positive impact on the social safety and security of each individual, since the level of education of convicted persons directly affects the degree of their correction. At the moment on the territory of our country there is a great involvement of all segments of the population (including convicts) to the sphere of educational services free or for a fee. Vocational education and training as a very important and necessary element in the domestic penitentiary system is regulated by various sources of law relating to both the system of penal legislation and the system of educational legislation of the Russian Federation. The objectives of legal regulation of relations in the field of education are the establishment of state guarantees, mechanisms for the implementation of human rights and freedoms in education, as well as the protection of the rights and interests of participants of relations in the educational field.

scholarly journals Methods building and printing 3D models historical architectural objects

2020 ◽  
Vol 75 ◽  
pp. 04016 ◽  
Author(s):  
Ihor Hevko ◽  
Olha Potapchuk ◽  
Iryna Lutsyk ◽  
Viktorya Yavorska ◽  
Viktoriia Tkachuk
Keyword(s):  
3D Printing ◽  
Complex Systems ◽  
Three Dimensional ◽  
3D Models ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Specialized Software ◽  
Bulk Data ◽  
Three Dimensional Models ◽  
Accuracy Speed

The authors present methods building and printing three-dimensional models for graphical reconstruction of historical architectural objects. Procedure sequence of the methods is exemplified through building the model of the Parochial Cathedral of St. Mary of the Perpetual Assistance of the 1950s. After analyzing and assessing the most popular specialized software means, the 3DS Max environment is chosen to build a three-dimensional model. Suggested software tools enable increased accuracy, speed and granularity of fixation of complex systems and expanded databases, providing efficient instruments to deal with bulk data and being relevant to new IT achievements. Sequence and content of operations for analytical and modeling cycles are substantiated. The cathedral model is built on the basis of archive photographs and drafts. The authors describe methods and the algorithm of procedures, principles of architectural and spacious modeling to recreate the architectural object. The three-dimensional model is built by applying a stereogram miniature of the destroyed Cathedral. Reconstruction of spacious configuration of the objects is based on parallax assessment of images. Stages of project implementation are determined. There are described methods of implementing modeling by 3DS Max tools and preparing the model for 3D printing in Cura.

Problems of establishment and development of the Institution of personal data protection in the Russian Federation: historical-legal aspect

2020 ◽  
pp. 28-35
Author(s):  
Yanis Arturovich Sekste ◽  
Anna Sergeevna Markevich
Keyword(s):  
Russian Federation ◽  
Data Protection ◽  
Information Technologies ◽  
Legal Aspect ◽  
Personal Data ◽  
Legal Regulation ◽  
Private Life ◽  
Russian Society ◽  
Personal Data Protection ◽  
The Russian Federation

The subject of this research is the problems emerging in the process of establishment and development of the Institution of personal data protection in the Russian Federation. Special attention is turned to the comparison of Soviet and Western models of protection of private life and personal data. The authors used interdisciplinary approach, as comprehensive and coherent understanding of socio-legal institution of personal data protection in the Russian Federation is only possible in inseparable connection with examination of peculiarities of the key historical stages in legal regulation of private life of the citizen. After dissolution of the Soviet political and legal system, the primary task of Russian law consisted in development and legal formalization of the institution of protection of human and civil rights and freedoms, first and foremost by means of restricting invasion of privacy by the state and enjoyment of personal freedom. It is concluded that the peculiarities of development of the new Russian political and legal model significantly impacted the formation of the institution of personal data protection in the Russian Federation. The authors believe that the Russian legislator and competent government branches are not always capable to manage the entire information flow of personal data; therefore, one of the priority tasks in modern Russian society is the permanent analysis and constant monitoring of the development of information technologies.

Integration of Safety Knowledge into Three-Dimensional Model Design and Construction Plan from the Perspective of Project Executors in Petrochemical Industry

2021 ◽  
Vol 11 (2) ◽  
pp. 185-192
Author(s):  
I-Jyh Wen ◽  
Chien Wei Liang
Keyword(s):  
Petrochemical Industry ◽  
Three Dimensional ◽  
3D Models ◽  
Model Design ◽  
Three Dimensional Model ◽  
3D Design ◽  
Safety And Health ◽  
Job Safety ◽  
Safety Knowledge ◽  
Design And Construction

In petrochemical industry, the execution of construction involves three main issues, namely, design planning, construction, and job safety. Three-dimensional (3D) models are increasingly applied to design and construction. However, the improper concept of 3D design has bred potential unsatisfactory behaviors and the lack of vigilance among workers. Besides, many employees are not fully aware of the safety in 3D design and construction planning. Therefore, our goal is to improve the safety and health of construction workers through design practices in the upstream of the construction phase, and verify the applicability of the combination of 3D models and safety knowledge. Specifically, a questionnaire survey was carried out among 124 employees in the construction-related fields of the petrochemical industry. The collected data were processed, and statically analyzed on SPSS. The results show that safety knowledge was acceptable in 3D model design from the perspective of project executors, and the integration of safety knowledge into the design helps to improve the safety environment of the construction site.

Bioprinting in ophthalmology: current advances and future pathways

2019 ◽  
Vol 25 (3) ◽  
pp. 496-514 ◽  
Author(s):  
Nataraj Poomathi ◽  
Sunpreet Singh ◽  
Chander Prakash ◽  
Rajkumar V. Patil ◽  
P.T. Perumal ◽  
...  
Keyword(s):  
3D Printing ◽  
Cardiac Tissue ◽  
Human Life ◽  
Three Dimensional ◽  
3D Models ◽  
Eye Diseases ◽  
Biological Research ◽  
Content Type ◽  
Almost All ◽  
Time Of Operation

Purpose Bioprinting is a promising technology, which has gained a recent attention, for application in all aspects of human life and has specific advantages in different areas of medicines, especially in ophthalmology. The three-dimensional (3D) printing tools have been widely used in different applications, from surgical planning procedures to 3D models for certain highly delicate organs (such as: eye and heart). The purpose of this paper is to review the dedicated research efforts that so far have been made to highlight applications of 3D printing in the field of ophthalmology. Design/methodology/approach In this paper, the state-of-the-art review has been summarized for bioprinters, biomaterials and methodologies adopted to cure eye diseases. This paper starts with fundamental discussions and gradually leads toward the summary and future trends by covering almost all the research insights. For better understanding of the readers, various tables and figures have also been incorporated. Findings The usages of bioprinted surgical models have shown to be helpful in shortening the time of operation and decreasing the risk of donor, and hence, it could boost certain surgical effects. This demonstrates the wide use of bioprinting to design more precise biological research models for research in broader range of applications such as in generating blood vessels and cardiac tissue. Although bioprinting has not created a significant impact in ophthalmology, in recent times, these technologies could be helpful in treating several ocular disorders in the near future. Originality/value This review work emphasizes the understanding of 3D printing technologies, in the light of which these can be applied in ophthalmology to achieve successful treatment of eye diseases.

scholarly journals Legal Peculiarities of Child Custody of Minor Parents with an Incomplete Parental Status

2020 ◽  
Vol 6 ◽  
pp. 22-25
Author(s):  
Ekaterina E. Lekanova ◽  
Keyword(s):  
Russian Federation ◽  
Legal Status ◽  
Legal Protection ◽  
Legal Regulation ◽  
Minor Parent ◽  
The Family ◽  
The Russian Federation ◽  
A Minor ◽  
The Guardian ◽  
Family Code

Despite the existence of an article in modern Russian legislation on the legal status of minor parents, many legal issues related to the implementation and protection of the rights, duties, interests of a minor parent and his child remained outside family legal regulation, which exacerbates the already difficult problem of legal protection of early parenthood. Moreover, the provisions of Article 62 of the Family Code of the Russian Federation are very inharmoniously combined with the rules of guardianship of minors. The aim of the work is to analyze the legislation on the legal status of minor parents and guardians, to identify the legal characteristics of the care of a child of minor parents. The author concludes that the features of the care of a child of minor parents, in addition to the age of one or both parents, in the case of the appointment of a guardian include: a combination of parenthood and guardianship; unequal opportunities for the care of a child by a minor parent who is not able to independently provide care, and by the legal representative of the child of the minor parent; special (additional) grounds for terminating guardianship of a child of minor parents; the need for the guardian to live together not only with the child in care, but also with his parent. The norms of paragraph 2 of article 62 of the Family Code of the Russian Federation and paragraph 2 of article 29 of the Federal law «On Guardianship and Custodianship» should be adjusted. It is proposed to introduce special rules for the selection of the guardian of a child of a minor parent, which would properly ensure the right of the minor parent to live together with the child.

scholarly journals Creation of virtual 3D models of the existing architectonic structures using the web resources

Spatium ◽  
2016 ◽  
pp. 30-36 ◽  
Author(s):  
Petar Pejic ◽  
Sonja Krasic
Keyword(s):  
Laser Scanning ◽  
Three Dimensional ◽  
3D Models ◽  
Three Dimensional Model ◽  
Web Resources ◽  
Existing Structures ◽  
Software Packages ◽  
Physical Presence ◽  
The Creation ◽  
Three Dimensional Models

Digital three-dimensional models of the existing architectonic structures are created for the purpose of digitalization of the archive documents, presentation of buildings or an urban entity or for conducting various analyses and tests. Traditional methods for the creation of 3D models of the existing buildings assume manual measuring of their dimensions, using the photogrammetry method or laser scanning. Such approaches require considerable time spent in data acquisition or application of specific instruments and equipment. The goal of this paper is presentation of the procedure for the creation of 3D models of the existing structures using the globally available web resources and free software packages on standard PCs. This shortens the time of the production of a digital three-dimensional model of the structure considerably and excludes the physical presence at the location. In addition, precision of this method was tested and compared with the results acquired in a previous research.

scholarly journals DIGITAL TECHNOLOGIES IN THE SYSTEM OF ORGANIZATIONAL AND LEGAL REGULATION OF EMPLOYMENT OF THE POPULATION

2021 ◽  
Vol 42 (1) ◽  
pp. 24-35
Author(s):  
А.А. Fedchenko ◽  
◽  
N.V. Dorokhova ◽  
E.S. Dashkova ◽  
◽  
...  
Keyword(s):  
Large Scale ◽  
Labor Relations ◽  
Negative Impact ◽  
Digital Technologies ◽  
Legal Regulation ◽  
Legal Aspects ◽  
Industrial Society ◽  
Self Employment ◽  
The Russian Federation ◽  
Post Industrial

The article examines the process of regulating employment through the introduction of digital technologies in the organizational and legal sphere. The authors considered the features of the manifestation of organizational and legal aspects of employment regulation during the transition to a post-industrial society. The attention is focused on the most problematic areas of employment regulation. The research is based on the position of continuity of socio-economic development and continuity of its stages. The study made it possible to identify quantitative, structural, and qualitative transformations in the field of employment in the Russian Federation, related to information and digital technologies. These changes require the solution of a set of tasks to improve the system of organizational and legal regulation of employment: limiting the negative impact of digital technologies in the process of regulating employment; regulation of organizational and legal regulation of all types of “agency labor” and its adjustment, considering the spread of its non-standard forms in terms of expanding the scope of digital technologies; ensuring cooperation between all parties of social and labor relations on issues related to the use of non-standard forms of employment in the context of the introduction of digital technologies; reduction of “digital illiteracy” among jobseekers; positioning of electronic self-employment as a promising form of employment regulation. Based on the results of the study, the authors determined the vector for solving these problems, considering the large-scale use of digital technologies.

scholarly journals Processing Three-Dimensional Models of Archaeological Artifacts

2021 ◽  
Vol 20 (7) ◽  
pp. 48-61
Author(s):  
Pavel V. Chistyakov ◽  
Ekaterina N. Bocharova ◽  
Ksenia A. Kolobova
Keyword(s):  
Three Dimensional ◽  
3D Models ◽  
International Standards ◽  
Post Processing ◽  
Three Dimensional Model ◽  
Scaled Model ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Dimensional Models ◽  
Three Dimensional Models

This article provides a detailed account of the process of scanning, post-processing and further manipulation of three-dimensional models obtained with structured light scanners. Purpose. The purpose of the study is determined by the need for national archaeologists to learn the methods of three-dimensional modeling for the implementation of scientific research corresponding to international standards. Unfortunately, this direction in national archaeology began to develop in a relatively recent time and there is a lag in the application of three-dimensional modeling of national archaeology compared to the world level. Results. Any archaeological, experimental or ethnographic artifact can be used for three-dimensional scanning. To perform post-processing of three-dimensional models it is necessary to carry out primary scanning of an artifact by one of the existing algorithms. The algorithm for creating models, their positioning, simplification, saving in various formats and export is described. The main sequence of 3D models post-processing includes: processing of groups of scanned projections (their cleaning and alignment), creation of artifact model and processing/rectification of the resulting model using special software. Conclusion. As a result of correct implementation of the algorithm, the researcher receives a scaled model completely corresponding to the original artifact. Obtaining a scalable, texture-free three-dimensional model of the artifact, which fully corresponds to the original and exceeds a photograph in the quality of detail transfer, allows a scientist to conduct precise metric measurements and any procedures of non-invasive manipulation of the models. The ability to access a database of three-dimensional models of archaeological collections greatly simplifies the work of archaeologists, especially in situations when country borders are closed.

Sign in / Sign up

Export Citation Format

Share Document