SUMMARIZED COMPARATIVE ASSESSMENT OF PERFORMANCE BOILER EQUIPMENT

2016 ◽  
Vol 6 (2) ◽  
pp. 140-146
Author(s):  
Aleksey G. SALOV ◽  
Anna A. GAVRILOVA ◽  
Yuliya V. CHIRKOVA ◽  
Lyaisan A. SAGITOVA
Keyword(s):  
Performance Indicators ◽  
Comparative Assessment ◽  
Pollutant Emissions ◽  
Actual State ◽  
Data Envelopment ◽  
Efficiency Criterion ◽  
Multi Criteria Evaluation ◽  
Electricity Costs ◽  
Energy Equipment

The article analyses the method of evaluating the comparative effectiveness of the equipment, taking into account the expanded set of characteristics of the energy equipment using the method of multi-criteria evaluation DEA (data envelopment analysis). Generalized performance indicators characterizing the efficiency (efficiency, fuel and electricity costs), ecological (pollutant emissions) and technology (temperature of the exhaust gases, vacuum deviation from the desired in the furnace) are formed. It is compiled global efficiency criterion that allows to comprehensively assess the quality of the work on the set of all partial criteria of equipment. The application of this method on the example of boiler TP-230. Using DEA method to optimize the choice of modes of operation of boilers in accordance with their actual state.

scholarly journals The system for monitoring and express analysis of main equipment of transformer substation 35/6 (10) kv

2021 ◽  
Vol 134 (1) ◽  
pp. 100-108
Author(s):  
I.G. Ivshin ◽  
◽  
A.R. Galyautdinova ◽  
O.V. Vladimirov ◽  
M.F. Nizamiev ◽  
...  
Keyword(s):  
Online Monitoring ◽  
Early Stage ◽  
Technical Condition ◽  
Actual State ◽  
Main Equipment ◽  
Transformer Substation ◽  
Express Analysis ◽  
Energy Equipment ◽  
Selection Of

There is carried out an analysis and selection of equipment necessary for monitoring and express analysis of the technical condition of a 35/6 (10) kV transformer substation. The authors propose diagnostic parameters for determining the technical condition of equipment and an algorithm for determining the coefficient of express analysis of a transformer substation, which ensures the process of remote monitoring, monitoring the state of operating equipment and predicting changes in the technical condition. The system for monitoring and express analysis of the technical condition of the equipment under development allows online monitoring of changes in the monitored parameters, keeping the equipment in serviceable condition. This monitoring system will make it possible to detect defects at an early stage, to operate the substation's energy equipment more efficiently, and to assess the technical condition of the entire substation in a comprehensive way. The above solutions make it possible to switch to organizing repairs of the substation's main equipment according to the actual state, as well as to increase the reliability and quality of electricity transmission to consumers.

Pembuatan Pilot Project Pengolahan Air Limbah Industri Rambut Palsu dengan Sistem Lumpur Aktif

2016 ◽  
Vol 8 (15) ◽  
pp. 37-47
Author(s):  
Sri Moertinah ◽  
Misbachul Moenir
Keyword(s):  
Activated Sludge ◽  
Biological Treatment ◽  
Operating Cost ◽  
Pilot Project ◽  
Labor Costs ◽  
Industrial Waste Water ◽  
Microbial Adaptation ◽  
Central Java ◽  
Electricity Costs

This study aims to create a pilot project for wastewater treatment wig industry with biological activated sludge technology to applied in the industry. Design criteria for the pilot project are the influent COD ≤ 900 mg/l, MLSS = 3,000 mg/l, 30-hours residence time. DO ≥ 2 mg/l and flow 10 m3/day. Implementation of a pilot project initiated by seeding aerobic microbes and microbial adaptation to proceed with wastewater to be treated. The trial results showed that the pilot project % COD reduction ranged from 73.2% - 91% and the result is not much different from the results of laboratory-scale research about 89.7% and the quality  of the effluent is already fullfill the standard of industrial waste water wig required by the Central Java Provincial Regulation No. 5 of 2012. The calculation of operating cost of activated sludge biological treatment which includes labor costs, electricity costs, equipment maintenance costs, expenses and other nutrients obtained the price of  Rp. 2972/m3 or Rp. 742.99/wig.ABSTRAKPenelitian ini bertujuan untuk membuat pilot project pengolahan air limbah industri rambut palsu dengan sistem lumpur aktif yang diterapkan di industri. Kriteria desain pilot project tersebut adalah COD influen ≤ 900 mg/l, MLSS = 3.000 mg/l, waktu tinggal 30 jam DO≥2 mg/l  dan debit air limbah 10 m3/hari. Pelaksanaan pilot project dimulai dengan seeding mikroba aerob dan dilanjutkan dengan adaptasi mikroba dengan air limbah yang akan diolah. Hasil uji coba pilot project menunjukkan bahwa % penurunan COD berkisar antara 73,2% - 91% dan hasil ini tidak berbeda jauh dengan hasil penelitian skala laboratorium sekitar 89,7% dan kualitas air limbah hasil pengolahan sudah memenuhi baku mutu air limbah industri rambut palsu yang dipersyaratkan oleh Peraturan Daerah Provinsi Jawa Tengah No 5 tahun 2012. Dari hasil perhitungan biaya operasional pengolahan biologis lumpur aktif yang meliputi biaya tenaga kerja, biaya listrik, biaya perawatan peralatan, biaya nutrien dan lainnya diperoleh harga sebesar Rp. 2972/m3  atau Rp. 742,99/wig.   Kata kunci : air limbah industri rambut palsu, pilot project, sistem lumpur aktif

Computable metrics of personal performance in software development teams

2019 ◽  
Author(s):  
Andriy Lishchytovych ◽  
Volodymyr Pavlenko
Keyword(s):  
Life Cycle ◽  
Software Development ◽  
Product Quality ◽  
Performance Indicators ◽  
Key Performance Indicators ◽  
Project Manager ◽  
Development Life Cycle ◽  
Software Product ◽  
Software Development Life Cycle

The present article describes setup, configuration and usage of the key performance indicators (KPIs) of members of project teams involved into the software development life cycle. Key performance indicators are described for the full software development life cycle and imply the deep integration with both task tracking systems and project code management systems, as well as a software product quality testing system. To illustrate, we used the extremely popular products - Atlassian Jira (tracking development tasks and bugs tracking system) and git (code management system). The calculation of key performance indicators is given for a team of three developers, two testing engineers responsible for product quality, one designer, one system administrator, one product manager (responsible for setting business requirements) and one project manager. For the key members of the team, it is suggested to use one integral key performance indicator per the role / team member, which reflects the quality of the fulfillment of the corresponding role of the tasks. The model of performance indicators is inverse positive - the initial value of each of the indicators is zero and increases in the case of certain deviations from the standard performance of official duties inherent in a particular role. The calculation of the proposed key performance indicators can be fully automated (in particular, using Atlassian Jira and Atlassian Bitbucket (git) or any other systems, like Redmine, GitLab or TestLink), which eliminates the human factor and, after the automation, does not require any additional effort to calculate. Using such a tool as the key performance indicators allows project managers to completely eliminate bias, reduce the emotional component and provide objective data for the project manager. The described key performance indicators can be used to reduce the time required to resolve conflicts in the team, increase productivity and improve the quality of the software product.

Principals’ Policy Preferences concerning Accountability: Implications for Key Competencies, Performance Indicators, and Professional Development

1995 ◽  
Vol 5 (5) ◽  
pp. 448-481 ◽  
Author(s):  
R. J. S. Mac Macpherson ◽  
Margaret Taplin
Keyword(s):  
Professional Development ◽  
Performance Indicators ◽  
Policy Preferences ◽  
Development Programs ◽  
Stakeholder Groups ◽  
Key Competencies ◽  
Professional Development Programs ◽  
Accountability Practices ◽  
State Schools

In this paper, we examine the policy preferences of Tasmania's principals concerning accountability criteria and processes, compare their views to other stakeholder groups, and identify issues that warrant attention in principals’ professional development programs. We show that there are many criteria and processes related to the quality of learning, teaching, and leadership that are valued by all stakeholder groups, including principals. We conclude that Tasmanian state schools probably need to review and develop their accountability policies, and that the professional development will need to prepare leaders for specific forms of performance and generate key competencies if more educative forms of accountability practices are to be realised in practice.

scholarly journals Galileo L10 Satellites: Orbit, Clock and Signal-in-Space Performance Analysis

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1695
Author(s):  
Constantin-Octavian Andrei ◽  
Sonja Lahtinen ◽  
Markku Poutanen ◽  
Hannu Koivula ◽  
Jan Johansson
Keyword(s):  
Performance Indicators ◽  
Satellite System ◽  
Short Term ◽  
Orbital Inclination ◽  
Navigation Data ◽  
Periodic Signals ◽  
Global Navigation Satellite ◽  
Minor Correction ◽  
Very High

The tenth launch (L10) of the European Global Navigation Satellite System Galileo filled in all orbital slots in the constellation. The launch carried four Galileo satellites and took place in July 2018. The satellites were declared operational in February 2019. In this study, we report on the performance of the Galileo L10 satellites in terms of orbital inclination and repeat period parameters, broadcast satellite clocks and signal in space (SiS) performance indicators. We used all available broadcast navigation data from the IGS consolidated navigation files. These satellites have not been reported in the previous studies. First, the orbital inclination (56.7±0.15°) and repeat period (50680.7±0.22 s) for all four satellites are within the nominal values. The data analysis reveals also 13.5-, 27-, 177- and 354-days periodic signals. Second, the broadcast satellite clocks show different correction magnitude due to different trends in the bias component. One clock switch and several other minor correction jumps have occurred since the satellites were declared operational. Short-term discontinuities are within ±1 ps/s, whereas clock accuracy values are constantly below 0.20 m (root-mean-square—rms). Finally, the SiS performance has been very high in terms of availability and accuracy. Monthly SiS availability has been constantly above the target value of 87% and much higher in 2020 as compared to 2019. Monthly SiS accuracy has been below 0.20 m (95th percentile) and below 0.40 m (99th percentile). The performance figures depend on the content and quality of the consolidated navigation files as well as the precise reference products. Nevertheless, these levels of accuracy are well below the 7 m threshold (95th percentile) specified in the Galileo service definition document.

Comparative assessment of bioactive compounds, antioxidant capacity and nutritional quality of red seaweeds and water spinach

2021 ◽  
pp. 101878
Author(s):  
Md. Solaiman Hossain ◽  
Saad Al-din Sifat ◽  
M. Afzal Hossain ◽  
Sazlina Salleh ◽  
Mofazzal Hossain ◽  
...  
Keyword(s):  
Antioxidant Capacity ◽  
Bioactive Compounds ◽  
Nutritional Quality ◽  
Comparative Assessment ◽  
Water Spinach ◽  
Red Seaweeds

Assessing and improving measurability of process performance indicators based on quality of logs

2021 ◽  
pp. 101874
Author(s):  
Cinzia Cappiello ◽  
Marco Comuzzi ◽  
Pierluigi Plebani ◽  
Matheus Fim
Keyword(s):  
Performance Indicators ◽  
Process Performance

scholarly journals On the use of criteria based on the SMART acronym to assess quality of performance indicators for safety management in process industries

2021 ◽  
Vol 70 ◽  
pp. 104392
Author(s):  
Jon Tømmerås Selvik ◽  
Surbhi Bansal ◽  
Eirik Bjorheim Abrahamsen
Keyword(s):  
Performance Indicators ◽  
Safety Management ◽  
Process Industries ◽  
Assess Quality

Comparative analysis of productive qualities of Sables without gray hair and with different degrees of gray hair in JSC «Plemzverosovkhoz» Saltykovsky»

2020 ◽  
Vol 1 (4) ◽  
pp. 63-67
Author(s):  
N. N. Shumilina ◽  
◽  
E. E. Larina ◽  
Keyword(s):  
Comparative Analysis ◽  
Entire Range ◽  
Comparative Assessment ◽  
Positive Correlation ◽  
Gray Hair ◽  
In Captivity ◽  
Males And Females ◽  
Length And Area ◽  
Common Defect

The pride of Russia has always been sable. Sable is unique not only in the quality of its fur, but also in the fact that almost the entire range of its habitat is located on the territory of our country. It was in our country that this animal was first bred in captivity. In this regard, Russia has long had a monopoly on the production of sable skins. In 1969, the black sable breed was approved, and in 1998, the «Saltykov» type of sable was approved. JSC «Saltykovsky Breeding farm» has created a unique herd of dark Sables with evenly spaced gray hair, the skins of which are valued at auctions by 10–30% more expensive [2]. The article presents the results of a comparative assessment of the productive qualities of Sables without gray hair and with different degrees of gray created in JSC «Plemzverosovkhoz » Saltykovsky» livestock. As a result of the analysis, it was found that Sables with gray hair have higher bonitirovki scores (more than 50%). Analyzing the indicators of bonitirovki in males and females with different degrees of gray hair, it was found that the quality of pubescence and color of males with bright gray hair is significantly superior to individuals without gray hair, the same trend is observed in females. In addition, a positive correlation was found (0,79) between the weight of skins in grams, their length and area both in Sables without gray hair, and in individuals with different degrees of gray hair. The most common defect on skins without gray hair is soaking.

Compound feed from different producers for piglets and their comparative assessment

2021 ◽  
pp. 3-12
Author(s):  
N. I. Kulmakova ◽  
T. A. Magomadov ◽  
N. M. Kostomakhin ◽  
M. N. Dmitrieva ◽  
H. Saleh
Keyword(s):  
Raw Materials ◽  
Comparative Assessment ◽  
Feed Additives ◽  
The Body ◽  
Animal Origin ◽  
Quality And Safety ◽  
Processing Technologies ◽  
Starting Compound ◽  
Federal Standard

The quality of raw materials and goods of animal origin depends first of all on the safety of feed, their balance in terms of the main nutrients and digestibility by the body. As a rule, the lower the quality and safety of feed, the lower the productivity of all types of animals and poultry. The quality of feed is influenced by all stages of their production: growing conditions, harvesting and storage, processing technologies, canning and preparation for feeding. Where high-quality feed is used in diets, maximum productivity and high realization of the genetic potential of animals are obtained. During the storage and processing of plant and animal raw materials its physic and mechanical, biochemical, sanitary and microbiological properties change. This can be avoided only by observing the sanitary and hygienic requirements for bagging, harvesting, and storing feed. The quality of feed is confirmed by its physical, chemical, organoleptic, microbiological and other indicators, which determines the variety of feed control methods at all stages of their turnover. In this connection, the development and strengthening of control over the quality and safety of feed and feed additives is one of the important tasks of modern animal feeding science. The purpose of the work was to carried out a comparative assessment of four samples of the starting compound feed SK-3 for piglets of different producers. The experimental part of the work has been carried out in the laboratory of veterinary expertise at the compound feed plant LLC “Athens-Volga”. For the study of compound feed an average sample was taken from each sample, separating from the combined sample using a hand scoop according to Federal standard 13496.0-2016. Methods of sampling. Quality and safety control was carried out according to organoleptic, physic and chemical, microbiological indicators and the content of mycotoxins in compound feed. Monitoring of compound feed of the compared samples of the starting compound feed for piglets SK-3 according to the studied indicators has shown that all samples meet the sanitary and hygienic requirements of Federal standard of our country.

Sign in / Sign up

Export Citation Format

Share Document