Optimisation of Plug and Abandonment Process Utilising Nuclear Technology for through Tubing Cement Evaluation

2021 ◽  
Author(s):  
Konstantin Valouiski ◽  
Afiq Azreen Zainuddin ◽  
Andrei Kalistratov ◽  
Ahmad Zawawi Abd Rajab ◽  
Siti Najmi Farhan Zulkipli ◽  
...  
Keyword(s):  
Peninsular Malaysia ◽  
Oil Fields ◽  
Consistent Finding ◽  
Evaluation Data ◽  
Operating Rate ◽  
Cement Integrity ◽  
Major Factors ◽  
The Cost ◽  
Cement Plug

Abstract One of the major factors in the well plug and abandonment (P&A) process is to provide a proper isolation in aging wells which requires effective placement of the cement plug in the most suitable location in the well. Identifying cement placement is usually achieved by running cement evaluation logging to define the quality of cement and top of cement depth behind and in between the casing annuli. However, this comes with significant costs due to tubulars or casings removal requirement prior to logging run in order to conduct a proper evaluation. This is necessary since acoustic and ultrasonic based cement evaluation technologies will not be able to determine cement quality behind several casing layers if the job is done through tubing. The cost involved is substantial especially in offshore operation in which the daily operating rate is significantly higher compared to an onshore operation. A new approach to cement evaluation has been tested during the well P&A campaign in one of the aging oil fields in offshore, Peninsular Malaysia. A nuclear based technology comprised of Gamma-Gamma, Neutron-Neutron and Neutron-Gamma measurements were utilized to evaluate cement integrity behind production casing and between production casing as well as intermediate casing while logging run was deployed through tubing in memory mode. Log data was compared with acoustic and ultrasonic based cement evaluation technology that was deployed after the tubing was pulled out in one of the wells. Results had shown a consistent finding with the conventional ultrasonic based cement evaluation data. Based on the logging results, cement placement design and depth was finalized and the cement plug was successfully tested as outlined in the well P&A guideline. Findings from this logging run had provided useful insight to the operator to validate the nuclear based thru tubing cement evaluation technology for wells P&A application. Huge cost saving could be captured through this application as a result of eliminating total rig days via offline cement evaluation logging and based on the results obtained planning for the exact well P&A design requirement prior to the rig arrival. This paper will outline the method, tools used to acquire the cement evaluation data and its operational advantages. Acquired data will be presented and discussed along with the methodology used to determine cement volume and top of cement depth behind and in between the casings.

Pengaruh Kompetensi Coder terhadap Keakuratan dan Ketepatan Pengkodean Menggunakan ICD 10 di Rumah Sakit X Pekanbaru Tahun 2016

2018 ◽  
Vol 1 (1) ◽  
pp. 31-43
Author(s):  
Nur Maimun ◽  
Jihan Natassa ◽  
Wen Via Trisna ◽  
Yeye Supriatin
Keyword(s):  
Medical Record ◽  
Human Error ◽  
Medical Personnel ◽  
Quality Of Data ◽  
Accuracy And Precision ◽  
Result Show ◽  
Study Implementation ◽  
Icd 10 ◽  
The Cost

The accuracy in administering the diagnosis code was the important matter for medical recorder, quality of data was the most important thing for health information management of medical recorder. This study aims to know the coder competency for accuracy and precision of using ICD 10 at X Hospital in Pekanbaru. This study was a qualitative method with case study implementation from five informan. The result show that medical personnel (doctor) have never received a training about coding, doctors writing that hard and difficult to read, failure for making diagnoses code or procedures, doctor used an usual abbreviations that are not standard, theres still an officer who are not understand about the nomenclature and mastering anatomy phatology, facilities and infrastructure were supported for accuracy and precision of the existing code. The errors of coding always happen because there is a human error. The accuracy and precision in coding very influence against the cost of INA CBGs, medical and the committee did most of the work in the case of severity level III, while medical record had a role in monitoring or evaluation of coding implementation. If there are resumes that is not clearly case mix team check file needed medical record the result the diagnoses or coding for conformity. Keywords: coder competency, accuracy and precision of coding, ICD 10

ABOUT NECESSITY OF MATHEMATICAL MODELING OF THE BUSINESS PROCESS OF COST ESTIMATE CALCULATIONS IN THE CONSTRUCTION OF OIL AND GAS FACILITIES

2017 ◽  
pp. 139-145
Author(s):  
R. I. Hamidullin ◽  
L. B. Senkevich
Keyword(s):  
Mathematical Modeling ◽  
Quality Assessment ◽  
Business Process ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Construction Organizations ◽  
The Cost ◽  
Cost Of Construction

A study of the quality of the development of estimate documentation on the cost of construction at all stages of the implementation of large projects in the oil and gas industry is conducted. The main problems that arise in construction organizations are indicated. The analysis of the choice of the perfect methodology of mathematical modeling of the investigated business process for improving the activity of budget calculations, conducting quality assessment of estimates and criteria for automation of design estimates is performed.

Return on Invesment (ROI) of Software Product: A Systematic Literature Review

2015 ◽  
Vol 6 (1) ◽  
pp. 50-57
Author(s):  
Rizqa Raaiqa Bintana ◽  
Putri Aisyiyah Rakhma Devi ◽  
Umi Laili Yuhana
Keyword(s):  
Return On Investment ◽  
Assessment Criteria ◽  
Software Product ◽  
And Performance ◽  
Rational Consideration ◽  
Actual Return ◽  
The Cost ◽  
Investment Models ◽  
The Impact

The quality of the software can be measured by its return on investment. Factors which may affect the return on investment (ROI) is the tangible factors (such as the cost) dan intangible factors (such as the impact of software to the users or stakeholder). The factor of the software itself are assessed through reviewing, testing, process audit, and performance of software. This paper discusses the consideration of return on investment (ROI) assessment criteria derived from the software and its users. These criteria indicate that the approach may support a rational consideration of all relevant criteria when evaluating software, and shows examples of actual return on investment models. Conducted an analysis of the assessment criteria that affect the return on investment if these criteria have a disproportionate effort that resulted in a return on investment of a software decreased. Index Terms - Assessment criteria, Quality assurance, Return on Investment, Software product

Classification of the factors forming the cost of the web-site

2017 ◽  
Vol 31 (2) ◽  
pp. 82-89
Author(s):  
E. S. Epifanov
Keyword(s):  
Web Site ◽  
Internet Site ◽  
Advantages And Disadvantages ◽  
Major Factors ◽  
The Cost ◽  
The Web

This article presents a classification of major factors that shape the cost of Internet site. Also discusses the limitations in determining the objectives of the web site; advantages and disadvantages of different factors.

Strategy for Protecting the North Sea: A Chemical Industry Perspective

1991 ◽  
Vol 24 (10) ◽  
pp. 269-276
Author(s):  
J. R. Lawrence ◽  
N. C. D. Craig
Keyword(s):  
North Sea ◽  
Chemical Industry ◽  
Important Research ◽  
The Public ◽  
The North ◽  
Anthropogenic Inputs ◽  
Seven Principles ◽  
The North Sea ◽  
The Cost

The public has ever-rising expectations for the environmental quality of the North Sea and hence of everreducing anthropogenic inputs; by implication society must be willing to accept the cost of reduced contamination. The chemical industry accepts that it has an important part to play in meeting these expectations, but it is essential that proper scientific consideration is given to the potential transfer of contamination from one medium to another before changes are made. A strategy for North Sea protection is put forward as a set of seven principles that must govern the management decisions that are made. Some areas of uncertainty are identified as important research targets. It is concluded that although there have been many improvements over the last two decades, there is more to be done. A systematic and less emotive approach is required to continue the improvement process.

Effects and Risks of Distance Learning in Higher Education

2020 ◽  
pp. 61-73
Author(s):  
Yu. M. Tsygalov
Keyword(s):  
Higher Education ◽  
Distance Learning ◽  
Online Education ◽  
New Technology ◽  
Negative Consequences ◽  
Higher Education System ◽  
First Results ◽  
Spread Of Infection ◽  
The Cost

The forced work of Russian universities remotely in the context of the pandemic (COVID-19) has generated a lot of discussion about the benefits of the new form of education. The first results were summed up and reports were presented, the materials of which showed that the main goal of online education — the prevention of the spread of infection, - has been achieved. Against this background, proposals and publications have appeared substantiating the effectiveness of the massive introduction of distance learning in Russia, including in higher education. However, the assessment of such training by the population and students in publications and in social networks was predominantly negative and showed that the number of emerging problems exceeds the possible benefits of the new educational technology. Based on the analysis of the materials of publications and personal experience of teaching online, the potential benefits and problems of distance learning in higher education in Russia are considered. It is proposed to consider the effects separately for the suppliers of new technology (government, universities) and consumers (students, teachers, society). It is substantiated that the massive introduction of online education allows not only to reduce the negative consequences of epidemics, but also to reduce budgetary funding for universities, optimize the age composition of teachers, and reduce the cost of maintaining educational buildings. However, there will be a leveling / averaging of the quality of education, and responsibility for the quality of training will shift from the state/universities to students. The critical shortcomings of online education are the low degree of readiness of the digital infrastructure, the lack of a mechanism for identifying and monitoring the work of students, information security problems, and the lack of trust in such training of the population. The massive use of online education creates a number of risks for the country, the most critical of which is the destruction of the higher education system and a drop in the effectiveness of personnel training. The consequences of this risk realization are not compensated by any possible budget savings.

Project Review on Water Level Sensing Using PLC

2016 ◽  
Vol 2 (2) ◽  
Author(s):  
Osama Mahfooz ◽  
Mujtaba Memon ◽  
Asim Iftikhar
Keyword(s):  
Automatic Control ◽  
Water Level ◽  
Digital Computer ◽  
Human Error ◽  
Water Tank ◽  
Industrial Plants ◽  
Commercial Use ◽  
The Cost ◽  
Water Tanks

<span>A PLC is a digital computer used to automate electromechanical processes. This research is<span> based on automation of a water tank by using Siemens PLC. Automatic control of water tanks<span> can work continuously and can provide accurate quantity of water in less time. In such process<span> there is no need of labor so there is no human error. Without human error, the quality of product<span> is better and the cost of production would definitely decrease with no error in quantity required.<span> Water level sensing can be implemented in industrial plants, commercial use and even at home<br /><br class="Apple-interchange-newline" /></span></span></span></span></span></span>

scholarly journals Economic assessment of a community-based care package for people with lower limb disorder caused by lymphatic filariasis, podoconiosis and leprosy in Ethiopia

2020 ◽  
Vol 114 (12) ◽  
pp. 1021-1034
Author(s):  
Natalia Hounsome ◽  
Mersha Kinfe ◽  
Maya Semrau ◽  
Oumer Ali ◽  
Abraham Tesfaye ◽  
...  
Keyword(s):  
Quality Of Life ◽  
Lymphatic Filariasis ◽  
Lower Limb ◽  
Life Quality ◽  
Psychosocial Care ◽  
Northwest Ethiopia ◽  
World Health ◽  
Care Package ◽  
The Cost

Abstract We conducted an implementation research study to integrate a holistic package of physical health, mental health and psychosocial care for podoconiosis, lymphatic filariasis and leprosy into routine healthcare in Gusha cluster, Guagusa Shikudad district, northwest Ethiopia. The healthcare package included training patients in lower limb hygiene and skin care and provision of shoes, hygiene supplies and medication. The implementation activities included training events, workshops, awareness raising, self-help groups, supportive supervision, staff secondments and advisory board meetings. The cost of implementing the care package in Gusha cluster, with a population of 30 558 people, was 802 655 Ethiopian birr (ETB) (£48 159) and the cost of delivering care to 235 participants was 204 388 ETB (£12 263), or 870 ETB (£52) per person. There was a 35% decrease in the mean disability scores (measured using the World Health Organization Disability Assessment Schedule 2.0) and a 45% improvement in the dermatology-specific quality of life (measured using the Dermatology Life Quality Index) at the 3-month follow-up compared with baseline. There were reductions in the number of days with symptoms, days off usual activities/work and days with reduced activity due to illness, all of which were statistically significant. Our pilot suggests that integration of the care package into routine healthcare in Ethiopia may be effective in improving health-related quality of life and disability and reducing time out of economic activity due to illness.

scholarly journals Quality Classification of Injection-Molded Components by Using Quality Indices, Grading, and Machine Learning

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 353
Author(s):  
Kun-Cheng Ke ◽  
Ming-Shyan Huang
Keyword(s):  
Machine Learning ◽  
Integrated Circuit ◽  
Quality Indices ◽  
Statistical Process ◽  
Suitable Alternative ◽  
Quality Grading ◽  
Quality Of Products ◽  
The Cost ◽  
Mlp Model

Conventional methods for assessing the quality of components mass produced using injection molding are expensive and time-consuming or involve imprecise statistical process control parameters. A suitable alternative would be to employ machine learning to classify the quality of parts by using quality indices and quality grading. In this study, we used a multilayer perceptron (MLP) neural network along with a few quality indices to accurately predict the quality of “qualified” and “unqualified” geometric shapes of a finished product. These quality indices, which exhibited a strong correlation with part quality, were extracted from pressure curves and input into the MLP model for learning and prediction. By filtering outliers from the input data and converting the measured quality into quality grades used as output data, we increased the prediction accuracy of the MLP model and classified the quality of finished parts into various quality levels. The MLP model may misjudge datapoints in the “to-be-confirmed” area, which is located between the “qualified” and “unqualified” areas. We classified the “to-be-confirmed” area, and only the quality of products in this area were evaluated further, which reduced the cost of quality control considerably. An integrated circuit tray was manufactured to experimentally demonstrate the feasibility of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document